CED 1G16-C Merchandisers Island Spot Display Dual Temperature.pdf
PDF 180 KB Posted
- Solicitation number
- HQC00426QE027
- Issued by
-
Defense Commissary Agency
About this file
This document is a Minimal Acceptable Standards specification for a dual temperature merchandiser island spot display unit (1G16-C) issued by the Grocery Department, effective Revision 2 as of September 22, 2021.
The equipment is designed to display refrigerated or frozen products throughout stores and is classified under Federal Supply Class 4110. Required dimensions are 40 to 48 inches long/wide, 27 to 36 inches deep, and 30 to 38 inches high with a minimum capacity of 11.1 cubic feet. The unit must be an upright floor model with dual temperature capability, glass lids, swivel casters, a self-contained evaporator pan requiring no plumbing, and thermostat-controlled settings maintaining temperatures between 0 to 40 degrees Fahrenheit or greater. The equipment must be Underwriters Laboratory (UL) listed and National Sanitation Foundation (NSF) certified, conform to Section 612 of the Clean Air Act and EPA's Significant New Alternatives Policy (SNAP), and use CFC-free refrigerants such as R290 (Propane), R744 (CO2), or R600a (Isobutane). A one-year warranty covering parts, service, and labor against defective material and workmanship is required. Color options are limited to black or white. Electrical specifications require standard U.S.A. 115 volts, 60 Hertz, single phase with a minimum 6-foot cord and NEMA Standard plug. The equipment must be shipped ready to plug in and use. The contractor must provide a point of contact for service, installation and operating instructions, and a parts list at delivery.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INITIATED
05/22/17
CED
GROCERY
DEPARTMENT
Minimal Acceptable Standards
REVISION
09/22/21
1G16-C Merchandiser, island, spot display, dual temperature PAGE 1 of 3
FY16r.01
1 Purpose of this Equipment: To display merchandised refrigerated or frozen products throughout a store.
2 Federal Supply Class: 4110
3 General Operating Specifications:
3.1 Dimensions:
3.1.1 40 to 48 inches long / wide, 27 to 36 inches deep, 30 to 38 inches high.
3.2 Salient Characteristics that shall be provided:
3.2.1 Equipment should be an upright floor model.
3.2.2 Dual temperature capable.
3.2.3 Self -contained evaporator pan requiring no plumbing.
3.2.4 Thermostat controlled temperature settings.
3.2.5 Temperature ranges between 0 to 40 degrees Fahrenheit or greater.
Swivel casters
3.2.6 Glass lids
3.2.7 Minimum 11.1 cubic feet capacity
3.3 Industry Standards / Requirement(s):
3.3.1 Industry Standards: Underwriters Laboratory (UL) listed and National
Sanitation Foundation (NSF) certification, or approved equivalent.
Conformité Européene (CE) is not acceptable for a standard.
3.3.2 Must conform to Section 612 of the Clean Air Act and the EPA’s Significant New Alternatives Policy (SNAP). Chlorofluorocarbon (CFC) free, type R290 (Propane), R744 (Co2), R600a (Isobutane) refrigerants are acceptable.
3.3.3 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
3.4 Information Technology requirements: N / A
3.5 Color Requirement(s): Black or White
DEPARTMENT
Minimal Acceptable Standards
REVISION
1G16-C Merchandiser, island, spot display, dual temperature PAGE 2 of 3
4 Electrical Requirements:
4.1 Standard U.S.A. electrical specifications: 115 volts, 60 Hertz, 1 phase.
4.2 Minimum 6 feet cord with a NEMA Standard plug, or a manufacturer’s equivalent to comply with the equipment plug in requirements.
4.3 Pacific Stores 60 HZ only.
5 Standard Contractor Requirements:
5.1 Must be shipped ready to plug in and use.
5.2 Information to be provided by the Contractor to the commissary at the time of delivery:
5.2.1 Point of Contact for Service
5.2.2 Installation and Operating Instructions
5.2.3 Parts List
5.3 Maintenance Sustainability Requirements: N / A
6 Special Coordinating / Safety Instructions: N / A
DEPARTMENT
Minimal Acceptable Standards
REVISION
1G16-C Merchandiser, island, spot display, dual temperature PAGE 3 of 3
STORE ORDER REQUEST
STORE NAME: __________________________ DODAAC: ____________________
_____ea. 1G16-C Merchandiser Spot Display
| 1 Purpose of this Equipment: To display merchandised refrigerated or frozen products throughout a store. |
| 3.3 Industry Standards / Requirement(s): |
| 3.5 Color Requirement(s): Black or White |
| 4.1 Standard U.S.A. electrical specifications: 115 volts, 60 Hertz, 1 phase. |
| 4.2 Minimum 6 feet cord with a NEMA Standard plug, or a manufacturer’s equivalent to comply with the equipment plug in requirements. |
| 4.3 Pacific Stores 60 HZ only. |
| 5 Standard Contractor Requirements: |
| 6 Special Coordinating / Safety Instructions: N / A |
File details come from the government source that posted it. Updated .