CDRL1_REPORT.pdf

PDF 191 KB Posted Aug 7, 2023

Attached to: LNAD & RFSU Repair Federal contract opportunity
Solicitation number: FA811923R0007
Issued by: Department of the Air Force Materiel Command Air Force Sustainment Center

About this file

Written by GovTribe AI · Dec 20, 2023

This document contains a Contract Data Requirements List (CDRL) for solicitation number FA811923R0007 seeking repair services for Low Noise Amplifier (LNA) and Radio Frequency Sub-Unit (RFSU) end items. The CDRL identifies 20 required data items to support contract performance monitoring and oversight. Key reporting items include a Government Property Inventory Report, Shipping Discrepancy Reports, a Production Surge Plan, Commercial Asset Visibility reporting, inventory reports, an Engineering Change Proposal process, and status and corrective action reports. Reports are due monthly, annually or within set timeframes of occurrences and must meet distribution controls. The solicitation seeks repair services from the Department of the Air Force Sustainment Center for the Materiel Command Air Force.

View the file

Other files for this federal contract opportunity

Other files attached to LNAD & RFSU Repair, newest first.
File	Type	Posted
FA811923R0007 Amend 0001.pdf	PDF	Aug 10, 2023
FA811923R0007.pdf	PDF	Aug 7, 2023
PWS LNAD RFSU.pdf	PDF	Aug 7, 2023
DIDs.pdf	PDF	Aug 7, 2023

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT DATA REQUIREMENTS LIST Form Approved OMB No. 0704-0188(1 Data Item)

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Executive Services Directorate (0704-0188).

Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE OF DATA ITEM

Government Property (GP) Inventory Report

3. SUBTITLE

Annual Government Property Physical Inventory Report

4. AUTHORITY

DI-MGMT-80441D

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

ANNLY

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

NOTE: Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Block 4:

a. All reports shall be submitted in the English Language.

2. Blocks 10, 11, 12, 13:

a. This report will be provided annually. Reporting Period is one year.

b. The data is representative of the Contractor's Internal Property Control System and shall be current as of the last day of the annual reporting period. If requested outside of an annual cadence, the data shall be current as of the date requested.

c. The report shall be delivered within seven (7) calendar days of the end of the first reporting period and annually thereafter, or within seven (7) calendar days of government request.

3. Block 9:

a. DISTRIBUTION STATEMENT "D": Distribution authorized to the Department of Defense and U.S. DoD contractors only, critical technology. (1 March 2023) Other requests for this document shall be referred to 848 SCMG/EN, Tinker Air Force Base, Oklahoma.

b. EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate IAW provisions of DoD Directive 5230.25.

c. DESTRUCTION NOTICE: For classified documents, follow the procedures IAW DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, and DoDM 5200.01 Vol 3, DoD Information Security Program: Protection of Classified Information, Enclosure 3, paragraph 17.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

4. Block 7, 14: Submit the Annual Government Property Physical Inventory Report to the following email address:

cameron.maxfield@us.af.mil

COORDINATORS:

See Block 16 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 1 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

PREVIOUS EDITION MAY BE USED.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A002

2. TITLE OF DATA ITEM

Report of Shipping (Item) and Packaging Discrepancy

3. SUBTITLE

SF-364 (ROD)

4. AUTHORITY

DI-MGMT-80503

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

ASREQ

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

As Required

13. DATE OF SUBSEQUENT

SUBMISSION

As Required

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

Changes to the office symbols shall be made by letter through the PCO/ACO without revision to this CDRL.

Contractor will use WEBSDR to submit an electronic SF-364 (Standard Form) IAW TO 00-35D-54 upon discovery of discrepancies for items of supply received for: overage, wrong item, duplication of shipment, misdirected shipment, nonreceipt, damage, and/or improperly packaged shipment. If the contractor submits a SF-364, Block 12 of the SF-364 must contain the following information for the missing items:

1.) NSN

2.) Part Number 3.) Nomenclature 4.) Quantity missing 5.) Price for part replacement to include all administrative and labor costs.

Additionally, all tags that accompanied the component, (i.e. shipping labels, repairable tags, and condition tags will be scanned and attached to the ROD request.

DCMA/QAR and/or Plant Clearance Officer must validate the discrepancy upon unpacking of the component. SDR/ROD must be submitted to the PCO/PMS within 48 hours of inventory receipt/induction.

BLOCK 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 848 SCMG/EN, Tinker Air Force Base, Oklahoma. (1 March 2023)

Control Warning Notice: Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC, Sec 2751 Et Seq) or the Export Administration Act of 1979, Title 50, USC, App 240 I Et Seq, as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

DESTRUCTION NOTICE: For classified documents, follow the procedures IAW DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, and DoDM 5200.01 Vol 3, DoD Information Security Program: Protection of Classified Information, Enclosure 3, paragraph 17.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

BLOCK 11: Within 5 working days of discovery of discrepancy.

BLOCK 14: E-mail copies to addressees per attached Distribution Matrix. Report of Discrepancy shall be submitted to the material originator.

Note: It is permissible to submit paper SF 364s until access to WEBSDR is attained.

FOB DESTINATION

COORDINATORS:

424 SCMS/GUME

3001 Staff Drive, Annex 4, Suite 1AC1 95A Tinker Air Force Base, Oklahoma 73145 Attention: Cameron P.

Maxfield

0 1 0

0 1 015. TOTAL

Page 2 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A003

2. TITLE OF DATA ITEM

Production Surge Plan

3. SUBTITLE

Capability Analysis Plan (CAP)

4. AUTHORITY

DI-MGMT-80969

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

In the event that the DoD experiences an unplanned spike or sudden increase in demand, due to major theater warfare or a national emergency (also known as surge, reference DFARs 217.208-70 and DFARs 252.217.7001), and invokes surge: The Contractor is willing to work to meet and sustain this demand for quantity levels above and beyond normal peacetime requirements.

Block 9: Approved for Unlimited Public and Foreign Distribution. Other requests shall be referred to 848 SCMG/EN, Tinker Air Force Base, Oklahoma.

Block 10, 11, 12, 13: The Capability Analysis Plan (CAP) shall be prepared IAW DI-MGMT-80969 and shall be submitted 30 days after the contract award.

This Plan shall include a delivery schedule showing the maximum sustainable rate of delivery for items in this contract.

This delivery schedule shall provide acceleration by month up to the maximum sustainable rate of delivery achievable within the Contractor's existing facilities, equipment, and subcontracting structure. This Plan will address the surge capacity possible at no increase to the contract prices as well as the surge capacity possible at an additional cost. Based on this Plan, a mutually agreed to increase the quantity of supplies or services called for under this contract by no more than x % percent; and the accelerate the rate of delivery may be established for this contract, at a price or cost established after contract award or to be established by negotiation.

COORDINATORS:

424 SCMS/GUME

3001 Staff Drive, Annex 4, Suite #1AC1 95A Tinker Air Force Base, Oklahoma 73145 Attention: Cameron P.

Maxfield

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 3 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A004

2. TITLE OF DATA ITEM

Commercial Asset Visibility Air Force (CAV AF)/Government Furnished Material Report

3. SUBTITLE

GFM End Item Reporting

4. AUTHORITY

DI-MGMT-81634C

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

SEE BLK 16 FOR REFERENCE

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

N/A

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

NOTE: Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Block 5: Contract Reference: PWS and CAV AF Reporting Requirements Document

2. Block 4: All reporting shall be submitted in the English Language.

3. Blocks 10, 11, 12, 13:

a. Date of first submission shall be within 24 hours following a supply or maintenance transaction, after the contract award date.

b. Contractor reporting requirements to CAV AF shall be submitted daily and/or within 24 hours of a supply or maintenance action occurrence IAW the CAV AF Reporting Requirements Document.

c. Data shall be current within 24 hours of the last End Item maintenance occurrence.

4. Blocks 7, 8, 14:

a. The contractor shall report End Item transactional data through electronic submission in CAV AF using the CAV AF website or CICA XML.

b. The contractor shall submit a DD Form 250 (Material Inspection and Receiving Report) electronically via the Internet to iRAPT (WAWF) website address: https://wawf.eb.mil, using DODAAC FA8251. MARK FOR: Address in block 14A.

c. A Letter of Transmittal shall be submitted in the month the delivery order is completed, covering all reports transmitted for that order. Submit the Letter to the following email address: cameron.maxfield@us.af.mil

COORDINATORS:

See Block 16 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 4 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A005

2. TITLE OF DATA ITEM

Contract Government Furnished Material (GFM) Monthly Requisition and Inventory Report

3. SUBTITLE

Requisition and Inventory Report

4. AUTHORITY

DI-MGMT-82128A

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

MTHLY

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

NOTE: Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Block 4: All reporting shall be in the English Language.

2. Blocks 10, 11, 12, 13:

a. Data shall be current as of the last date of the reporting period (end of the month).

b. The first report shall be submitted no later than five (5) business days after the close of the first reporting period (previous month's last calendar date).

c. Subsequent reports shall be submitted no later than five (5) business days of the close of the reporting period (previous month's last calendar date).

3. Block 9:

b. EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate IAW provisions of DoD Directive 5230.25.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

4. Block 7, 14: Submit the Requisition and Inventory Reports to the following email address:

cameron.maxfield@us.af.mil

COORDINATORS:

See Block 16 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 5 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A006

2. TITLE OF DATA ITEM

Counterfeit Prevention Plan

3. SUBTITLE

CPP

4. AUTHORITY

DI-MISC-81832

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUEA

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

Blk 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. (1 March 2023) Other requests shall be referred to 848 SCMG/EN, Tinker Air Force Base, Oklahoma.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

The plan shall be delivered in electronic PDF format through the Wide Area Workflow (WAWF) system no later than 90 calendar days after contract award. (FA8119) Contractor format acceptable unless otherwise defined by applicable Data Item Description (DID).

DID Requirements are NOT tailored.

Delivery CANNOT be deferred.

COORDINATORS:

424 SCMS/GUEA

3001 Staff Drive Tinker Air Force Base, Oklahoma 73145

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 6 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A007

2. TITLE OF DATA ITEM

Acquisition and Sustainment Data Package (ASDP) Teardown Deficiency Report

3. SUBTITLE

ASDP TDR

4. AUTHORITY

DI-PSSS-81534B

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

Changes to the office symbols shall be made by letter through the PCO/ACO without revision to this CDRL.

BLOCK 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. (1 March 2023) Other requests shall be referred to 848 SCMG/EN, Tinker Air Force Base, Oklahoma.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

BLOCKS 10, 11, 12, and 13: To be negotiated upon government's request.

COORDINATORS:

424 SCMS/GUME

3001 Staff Drive, Annex 4, Suite #1AC1 95A Tinker Air Force Base, Oklahoma 73145 Attention: Cameron P.

Maxfield

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 7 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Contract Depot Maintenance (CDM) Monthly Production Report

3. SUBTITLE

CDM Production Monthly Status Report

4. AUTHORITY

DI-PSSS-81995A

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

MTHLY

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

NOTE: Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Block 4:

a. All reporting shall be submitted in the English Language.

b. The Contractor's CAV AF Reporting shall reflect their inventory property control management system data records which shall represent timely and accurate accountability of AF inventory assets at the physical location(s) of the contractor's repair facility (including subcontractor facilities); shop floor, bond room and/or receiving/shipping docks, etc. for each repair.

c. The Contractor shall report by contract delivery order on all applicable categories, totals and on-hand balances, providing TABLE I (DI-PSSS-81995A) for EACH repair location, including subcontractor facilities, for the contracts maintenance occurrence actions during the reporting period.

d. The Contractor shall report on production, providing TABLE I (DI-PSSS-81995A) for EACH repair location, including subcontractor facilities, for which the contractor produced assets during the reporting period.

2. Blocks 10, 11, 12, 13:

a. The reports shall be provided monthly within 5 (five) business days of the previous month's last calendar date.

b. Reports shall continue to be submitted by the contractor unless the requirement is terminated by the assigned Contracting Officer at the request of the Program Manager (PM) and the Production Management Specialist (PMS).

c. The Final Report submitted following the final reporting period on the contract shall be annotated "Final Report".

3. Block 9:

a. DISTRIBUTION STATEMENT "D": Distribution authorized to the Department of Defense and U.S. DoD contractors only, critical technology. Other requests for this document shall be referred to 848 SCMG/EN, Tinker Air Force Base, Oklahoma. (1 January 2023)

b. EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate IAW provisions of DoD Directive 5230.25.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

4. Block 7, 14: Submit the CDM Production Monthly Status Reports to the following email address:

cameron.maxfield@us.af.mil

See Block 16 0 1 0

0 1 015. TOTAL

Page 8 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

COORDINATORS:

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A009

2. TITLE OF DATA ITEM

Engineering Change Proposal (ECP)

3. SUBTITLE

N/A

4. AUTHORITY

DI-SESS-80639E

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUEA

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

See Block 16

10. FREQUENCY

ASREQ

11. AS OF DATE

As Required

12. DATE OF FIRST

SUBMISSION

As Required

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

Blk 4: Contractor format or as 9102 format or equivalent is acceptable. The contract, CDRL number, document name, date of submission and document number shall appear on the first page of deliverable.

Blk 7: All inspection and acceptance shall be at destination utilizing WAWF. A combination of an invoice and receiving report shall be submitted through WAWF in order to receive payment for data reports.

Blk 8: Government written notice of approval/disapproval is 30 days after receipt of contractor's report.

Blk 9: DISTRIBUTION STATEMENT B. Distribution authorized to U.S. Government agencies proprietary information (1 March 2023). Other requests for this document shall be referred to 848 SCMG/EN, Tinker Air Force Base, Oklahoma.

Control Warning Notice: WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

Blk 13: To be determined.

COORDINATORS:

424 SCMS/GUEA

3001 Staff Drive Tinker Air Force Base, Oklahoma 73145

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 9 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A010

2. TITLE OF DATA ITEM

Calibration Certification/Report

3. SUBTITLE

N/A

4. AUTHORITY

DI-QCIC-80798C

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

See Block 16

11. AS OF DATE

N/A

12. DATE OF FIRST

SUBMISSION

N/A

13. DATE OF SUBSEQUENT

SUBMISSION

N/A

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, critical technology. (1 March 2023) Other requests shall be referred to 848 SCMG/EN, Tinker Air Force Base, Oklahoma.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

Block 10: Upon ACO request.

Contractor Format Acceptable

Delivery CANNOT Be Deferred

COORDINATORS:

424 SCMS/GUME

3001 Staff Drive, Annex 4, Suite 1AC1 95A Tinker Air Force Base, Oklahoma 73145 Attention: Cameron P.

Maxfield

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 10 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A011

2. TITLE OF DATA ITEM

Meeting Agenda

3. SUBTITLE

N/A

4. AUTHORITY

DI-ADMN-81249C

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

ASREQ

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

BLOCK 9: DISTRIBUTION STATEMENT "D" DISTRIBUTION AUTHORIZED TO DEPARTMENT OF

DEFENSE (DOD) AND DOD CONTRACTORS FOR ADMINISTRATIVE OR OPERATIONAL USE. (1 March 2023) OTHER REQUESTS FOR A COPY OF THIS DOCUMENT SHALL BE REFERRED TO 848 SCMG/EN, Tinker Air Force Base, Oklahoma.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE

ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

THE ABOVE DISTRIBUTION STATEMENT AND WARNING NOTICE SHALL BE DISPLAYED OR AFFIXED

TO THE DATA IN A CONSPICUOUS POSITION.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

BLOCK 11: TO BE DETERMINED

Block 12: Once meetings/reviews are scheduled, Contractor to provide agenda within 5 calendar days of event.

BLOCK 13: TO BE DETERMINED

BLOCK 14: ALL DIGITAL SUBMISSIONS SHALL BE MADE VIA SECURE ELECTRONIC MAIL.

Email preferred: cameron.maxfield@us.af.mil

CONTRACTOR FORMAT IS ACCEPTABLE.

DID REQUIREMENTS ARE NOT TAILORED.

DELIVERY CANNOT BE DEFERRED.

COORDINATORS:

424 SCMS/GUME

3001 Staff Drive, Annex 4, Suite # 1AC1 95A Tinker Air Force Base, Oklahoma 73145 Attention: Cameron P.

Maxfield

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 11 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A012

2. TITLE OF DATA ITEM

Meeting Minutes

3. SUBTITLE

N/A

4. AUTHORITY

DI-ADMN-81250C

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

ASREQ

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

BLOCK 9: DISTRIBUTION STATEMENT "D" DISTRIBUTION AUTHORIZED TO DEPARTMENT OF

DEFENSE (DOD) AND DOD CONTRACTORS FOR ADMINISTRATIVE OR OPERATIONAL USE

DETERMINED. (1 March 2023) OTHER REQUESTS FOR A COPY OF THIS DOCUMENT SHALL BE REFERRED TO 848 SCMG/EN, Tinker Air Force Base, Oklahoma.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE

ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

THE ABOVE DISTRIBUTION STATEMENT AND WARNING NOTICE SHALL BE DISPLAYED OR AFFIXED

TO THE DATA IN A CONSPICUOUS POSITION.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

BLOCK 11: TO BE DETERMINED

Block 12: Contractor to provide report 5 calendar days after meetings/reviews.

BLOCK 13: TO BE DETERMINED

BLOCK 14A: ALL DIGITAL SUBMISSIONS SHALL BE MADE VIA SECURE ELECTRONIC MAIL.

Email preferred: cameron.maxfield@us.af.mil

Contractor Format Acceptable

DID Requirements not tailored.

Delivery cannot be deferred.

COORDINATORS:

424 SCMS/GUME

3001 Staff Drive, Annex 4, Suite # 1AC1 95A Tinker Air Force Base, Oklahoma 73145 Attention: Cameron P.

Maxfield

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 12 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A013

2. TITLE OF DATA ITEM

Presentation Material

3. SUBTITLE

N/A

4. AUTHORITY

DI-ADMN-81373

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

ASREQ

11. AS OF DATE

SEE BLOCK 16

12. DATE OF FIRST

SUBMISSION

SEE BLOCK 16

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLOCK 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

Blk 11: TO BE DETERMINED

Blk 12: ONCE MEETINGS/REVIEWS ARE SCHEDULED, CONTRACTOR TO PROVIDE PRESENTATION

MATERIAL WITHIN 5 DAYS OF EVENT.

Blk 13: TO BE DETERMINED

Blk 14: Deliveries shall be submitted as web accessible documents.

CONTRACTOR FORMAT IS ACCEPTABLE.

DID REQUIREMENTS ARE NOT TAILORED.

DELIVERY CANNOT BE DEFERRED.

COORDINATORS:

424 SCMS/GUME

3001 Staff Drive, Annex 4, Suite # 1AC1 95A Tinker Air Force Base, Oklahoma 73145 Attention: Cameron P.

Marshall

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 13 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A014

2. TITLE OF DATA ITEM

Nuclear Hardness and Survivability (NH&S) Program Plan

3. SUBTITLE

NH&S Program Plan

4. AUTHORITY

DI-ENVR-82097

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUEA

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 848 SCMG/EN. (1 March 2023)

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

DID Requirements:

The contractor shall submit a Nuclear Hardness and Survivability (NH&S) Hardness Program Assurance Plan (HAP) to the government, for approval, per DI-ENVR-82097. It shall include Vulnerability Analysis/Verification Reports (VA/VRs) documenting any Hardness Critical Item (HCI) changes in accordance with the approved NH&S HAP.

Nuclear hardness and survivability requirements shall also be applicable to sub vendors.

Delivery CANNOT Be Deferred

COORDINATORS:

424 SCMS/GUEA 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 14 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A015

2. TITLE OF DATA ITEM

Status Report

3. SUBTITLE

N/A

4. AUTHORITY

DI-MGMT-80368A

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

ASREQ

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, critical technology. (1 March 2023) Other requests shall be referred to 848 SCMG/EN, Tinker Air Force Base, Oklahoma.

Control Warning Notice: Warning-This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC, Sec 2751 Et Seq) or the Export Administration Act of 1979, as amended, Title 50, USC, App 240 I Et Seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

Blocks 11-13: The first report shall be submitted within 30 calendar days and subsequent reports submission(s) every 30 calendar days thereafter.

The contractor shall submit a status report regarding appropriate action from GIDEP alert if it requires a stock purge that negatively impacts production on contract. The contractor shall perform a risk analysis and provide recommendations to the cognizant engineering office.

424 SCMS/GUME

3001 Staff Drive, Annex 4, Suite # 1AC1 95A Tinker Air Force Base, Oklahoma 73145 Attention: Cameron P. Maxfield

COORDINATORS:

424 SCMS/GUME

3001 Staff Drive, Annex 4, Suite # 1AC1 95A Tinker Air Force Base, Oklahoma 73145 Attention: Cameron P.

Maxfield

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 15 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A016

2. TITLE OF DATA ITEM

Contractor's Corrective Action Plan

3. SUBTITLE

N/A

4. AUTHORITY

DI-MGMT-80501

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

ASREQ

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

The Contractor shall develop and provide a corrective action plan with regard to breached or anticipated to be breached contractual requirements.

Blocks 11-13: The first report shall be submitted within 15 calendar days of the contractor's discovery of identification of breached or anticipated to be breached contractual requirements.

Block 14A: All submission shall be provided as an electronically editable, machine-readable Comma Separated Values (CSV) text file with alphanumeric fields enclosed in double quotation marks made available via electronic mail.

Email preferred: cameron.maxfield@us.af.mil

Contractor Format Acceptable

Delivery CANNOT Be Deferred

COORDINATORS:

424 SCMS/GUME

3001 Staff Drive, Annex 4, Suite # 1AC1 95A Tinker Air Force Base, Oklahoma 73145 Attention: Cameron P.

Maxfield

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 16 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A017

2. TITLE OF DATA ITEM

Contract Government Furnished Material (GFM) Monthly Requisition and Inventory Repor

3. SUBTITLE

Requisition and Inventory Report

4. AUTHORITY

DI-MGMT-82128A

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

MTHLY

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

NOTE: Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Block 4: All reporting shall be in the English Language.

2. Blocks 10, 11, 12, 13:

a. Data shall be current as of the last date of the reporting period (end of the month).

b. The first report shall be submitted no later than five (5) business days after the close of the first reporting period (previous month's last calendar date).

c. Subsequent reports shall be submitted no later than five (5) business days of the close of the reporting period (previous month's last calendar date).

3. Block 9:

b. EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

4. Block 7, 14: Submit the Requisition and Inventory Reports to the following email address:

cameron.maxfield@us.af.mil

COORDINATORS:

See Block 16 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

22 JUN 2023

I. APPROVED BY

//ELECTRONICALLY SIGNED//

Maxfield, Cameron P

424 SCMS / GUME 405-582-6879 / 852-6879

J. DATE

21-JUN-23

Page 17 of 20DD FORM 1423-1, FEB 2001 Version 2Generated by PRPS using Jasper Reports on 28 Jun 2023

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-2 / Multiple Items

E. CONTRACT / PR NO.

FD20302301100

F. CONTRACTOR

1. DATA ITEM NO.

A018

2. TITLE OF DATA ITEM

Bill Of Materials (BOM) for Logistics and Supply Chain Risk Management

3. SUBTITLE

N/A

4. AUTHORITY

DI-PSSS-81656B

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

424 SCMS/GUME

7. DD 250 REQ

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

ANNLY

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 16 MAR 2023DATE:

Blk 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 848 SCMG/EN, Tinker Air Force Base, Oklahoma.

For unclassified, destroy by any method that will prevent disclosure of contents or reconstruction of the document IAW DoDI 5230.24 Enclosure 3, Paragraph 17.

Blocks 11-13: The first report shall be submitted within 15 calendar days of the contractor's discovery that one or more of the components or materials intended to be incorporated directly into an end item specified to be delivered under the delivery order or contract…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 7, 2023.