CDRL T001_TechMan_CDMCert 01.24.2020.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302 and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the

Government Issuing Contracting Officer for the Contract/PR No. Listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TBD T TDP________ TM TMSS OTHER _________

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

Scalar Network Analyzer P/N 8003-

S5554N N64267-20-D-XXXX Liberty Test Equipment

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

T001 Commercial Off-The-Shelf (COTS) Manuals and

Associated Supplemental Data

Operator/Service Manual

II

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

DI-TMSS-80527C

(See Block 16)

SOW Paragraph 4.2

(See Block 16)

NAVAIRLKE 41L4

TOTAL PRICE

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST

SUBMISSION

14. DISTRIBUTION

XX C

(See Block 16)

(See Block 16) (See Block 16) (See Block 16)

b. COPIES

8. APP CODE 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE

Final

A

(See Block 16)

N/A (See Block 16)

Draft Reg. Rep ro

16. REMARKS Patrick Brannick 1 1 0

Block 4/5: DI-TMSS-80527C shall be used as guidance and is provided for reference. SOW paragraph 4.2 is mandatory to this requirement.

Block 8: Operator/Service Manual(s) (CDRL T001 subtitle) requires government approval. Contractor shall provide a preliminary draft to the government for review, comment, and approval no later than (NLT) 60 calendar days prior to Initial

Operational Capability (IOC). Government will provide the contractor with comments NLT 15 calendar days of receipt of preliminary draft. Contractor shall provide a government approved final version with incorporated comments NLT 30 calendar days prior to IOC of the first system(s) ordered to addressees in accordance with (IAW) CDRL T001 distribution (Block 14a). For commercial items, the Initial

Operational Capability (IOC) is defined as the first delivery under a contract.

Block 9: DISTRIBUTION STATEMENT C. DISTRIBUTION AUTHORIZED TO

U. S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS TO PROTECT

PUBLICATIONS REQUIRED FOR OFFICIAL USE OR FOR ADMINISTRATIVE

OR OPERATIONAL PURPOSES ONLY. OTHER REQUESTS FOR THIS

DOCUMENT SHALL BE REFERRED TO NAWCAD METROLOGY AND

CALIBRATION OFFICE, ATTN: CALIBRATION STANDARDS MANAGER,

NAWCAD, NAS PATUXENT RIVER, BLDG 1403, 22113 FORTIN CIRCLE,

UNIT 7, PATUXENT RIVER, MD 20670-1118.

Block 12: First government approved final version of the Operator/Service Manual submission shall be provided to the government (NLT) 30 calendar days prior to

(IOC) of the first system(s) ordered under a contract.

Block 10/13: Submissions of Operator/Service Manual(s) shall be provided with each new system.

Block 14: Submission in contractor format is acceptable. Electronic format is desired and acceptable if in MS-Excel or MS Word. Electronic submission of data shall also be on CD-ROM and/or DvD media. Qty. (1) Operator/Service Manual shall be shipped with each system installed. Quantity and copies shall be provided IAW

CDRL T001 distribution (Block 14a). Addressee's POC information provided on

CDRL supplemental page 2.

NAVAIRLKE 41L4

Heather M. Loprano 1 1 0

NAVAIRLKE 41L4

Corry Barnhouse 6.7.6.3S 1 1 0

NAWCAD 6.7.6.3S

With each unit shipped 0 1 0

15. TOTAL 3 4 0

G. PREPARED BY

H. DATE I. APPROVED BY J. DATE

H. Loprano, NAVAIRLKE 41L4 12/18/2019

K. Bergland, NSWC Corona, MS35 CDM 01/24/2020

DD Form 1423-1 JUN 90 Previous editions are obsolete. Page 1 of 2 Pages

1077/183

DD FORM 1423 (CDRL) Supplemental

BLOCK 14 ENTRY COMPLETE ADDRESS

Patrick Brannick, patrick.brannick@navy.mil

NAWCAD 4.1.12.4

JB MDL

Highway 547, Building 120-3, Rm. 269

Lakehurst, NJ 08733

Heather M. Loprano, heather.loprano@navy.mil

NAVAIR Metrology and Calibration

NAWCAD 4.1.12.4

JB MDL

Highway 547, Building 120-3, Rm. 269

Lakehurst, NJ 08733

Corry Barnhouse, corry.barnhouse@navy.mil

NAVAIR METCAL 6.7.6.3S

Bldg 1403

22113 Fortin Circle, Unit 7

Patuxent River, MD 20670 mailto:patrick.brannick@navy.mil mailto:heather.loprano@navy.mil mailto:corry.barnhouse@navy.mil