CDRL A002 DID Conceptual Design Drawings Models.pdf
PDF 105 KB Posted
- Attached to
- Energy Finite Element Analysis Software Technical Support Federal contract opportunity
- Solicitation number
- N0016724Q0002
About this file
This Data Item Description provides formatting and content requirements for Conceptual Design Drawings/Models. Conceptual design drawings and models must document engineering design concepts in detail and indicate whether a technology is feasible or if a design concept could potentially meet stated requirements. The types of drawings will vary based on the design complexity and will be selected by either the contractor or government as specified in the contract. Drawings and models must be identified with the contractor or government's CAGE code and document numbers.
The related federal contract opportunity is a solicitation for energy finite element analysis software technical support from the Department of the Navy Naval Sea Systems Command. No further details are provided on products/services required, pricing terms, response dates, or other salient information.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N0016724Q0002 CSS.pdf | ||
| CDRL A003 DID Technical Report - Study_Services.pdf | ||
| CDRL A001_User Manual.pdf | ||
| Redacted EFEA Sole Source Justification.pdf | ||
| CDRL A003_PowerPoint.pdf | ||
| CDRL A002_Model.pdf | ||
| CDRL A001 DID Software User Manual.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: CONCEPTUAL DESIGN DRAWINGS/MODELS
Number: DI-SESS-81001E Approval Date: 26 Feb 13
AMSC Number: A9350 Limitations:
DTIC Applicable: GIDEP Applicable:
Office of Primary Responsibility: AR
Applicable Forms:
Use/relationship: Conceptual design drawings/models define engineering design concepts. They are used to reduce technical uncertainty as to whether or not a technology is feasible or a design concept has potential to meet stated requirements.
a. This Data Item Description (DID) contains the format and content preparation instructions for
Conceptual Design Drawings/Models resulting from the work task described in 5.3.3.1 of MIL-
STD-31000.
b. This DID is applicable to acquisitions of military systems, equipment, and components. It is intended for use primarily during the concept demonstration/validation phase of the DoD materiel life-cycle.
c. It is not intended that all the requirements contained herein should be applied to every program.
This DID should be tailored to the minimum data requirements of the applicable contract or purchase order.
d. This DID is related to DI-SESS-81000E, DI-SESS-81002F and DI-SESS-81003E. This DID supersedes DI-SESS-81001D.
Requirements:
1. Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as cited in the ASSIST database, https://assist.dla.mil, at the time of the solicitation; or, for documents not included in ASSIST, as stated herein.
2. General. Conceptual design drawings/models shall be in accordance with MIL-STD-31000.
3. Format. Conceptual design drawings/models shall be in the contractors or Government's format as specified on the TDP Option Selection Worksheet incorporated into the contract or purchase order.
Source: http://assist.dla.mil -- Downloaded: 2023-08-09T21:15Z Check the source to verify that this is the current version before use.
https://assist.dla.mil,/
DI-SESS-81001E
4. Content. Conceptual design drawings/models shall document an engineering design concept in detail. These drawings/models shall indicate whether or not a technology is feasible or the design concept has the potential of meeting stated requirements.
5. Selection of drawings. The types of drawings to be prepared will vary according to the complexity of the design concept. The Option Selection Worksheet incorporated in the contract or purchase order will specify whether the contractor or the Government is responsible for selecting the types of drawings to be used. Associated lists are not required, but may be used if necessary to meet the information content requirements of para 4 above.
6. CAGE code and document numbers. Conceptual Design Drawings/Models shall be identified with the contractor's CAGE code and contractor document numbers or with a Government CAGE code and Government document numbers as specified in the Option Selection Worksheet incorporated in the contract.
7. End of DI-SESS-81001E.
Source: http://assist.dla.mil -- Downloaded: 2023-08-09T21:15Z Check the source to verify that this is the current version before use.
File details come from the government source that posted it. Updated .