CDRL_A001_Inspection_Only_17G230052-1.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

16. REMARKS

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE Draft

b. COPIES

Final

Reg Repro

15. TOTAL

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page of Pages Adobe Professional 8.0

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

Reset

CONTRACT DATAREQUIREMENTSLIST

(1 Data Item)

A. CONTRACT LINE ITEM NO. B.EXHIBIT C.CATEGORY:

TDP TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

AFLCMC/WLE; DSN 468-6745

The FAT/IPP shall be submitted in a single, searchable Adobe PDF file and submitted by Email. If the FAT/IPP is greater that 15MB in size, the Government will accept delivery through DoD Safe Access File Exchange (SAFE) (https://safe.apps.mil) to the PCO.

NOTE: Any changes to the FAT/IPP after approval must be coordinated with the technical authority approving the plan. All coordinating actions shall be processed through the PCO per contracting regulations and public law.

The draft FAT/IPP shall be submitted to the PCO and the following email addresses:

Julian.Stevenson@us.af.mil j.brittain@us.af.mil AFLCMC.WLMB.AFLCMCWLMPSECSE@us.af.mil Text7: The DID shall be tailored as follows:

1. Delete 3.1.f(4)

2. In paragraph 3.8 delete the phrase "software version".

3. In all sub-paragraphs of section 3 where "test and inspection" is shown, delete "test and".

4. In paragraph 3.7 delete the phrase "and for the testing".

5. Delete 3.9.b and 3.9.c.

6. Restructure paragraph 3.9.e(2) to read "Any Pass or Fail result forms, or other result forms shall be included in the FAT/IPP. Result forms included in Acceptance Test Procedures (ATP), that are part of the TDP provided to the contractor, shall be included."

7. In paragraph 3.10b delete the phrase "planned for testing".

Blk 7:

The Government will accept the Receiving Report through WAWF upon final delivery.

Blk 8:

The FAT/IPP will be approved by C-17 SPO Support Equipment Engineering.

Blk 10, 11, 12, 13:

The contractor shall submit an initial draft FAT/IPP in accordance with the contracted schedule. The Government engineer shall have 60 business days to review the initial draft FAT/IPP. The contractor shall continue to revise the FAT/IPP until the Government engineer is satisfied that the FAT/IPP meets all the necessary requirements of this CDRL. After the Government engineer approves the draft FAT/IPP and notifies the PCO and contractor through email communication, the contractor shall submit the invoice in WAWF for Government final approval of the FAT/IPP.