CCTV_PACS Char_DS_17SEP2024.pdf

CCTV and Physical Access System Characteristics & Data Sheets Cameras

1. All Cameras shall be IP cameras and powered by POE, POE+, or POE ++ standards as a minimum. All cameras shall be able to do at a minimum HTTPS and able to receive certifications from VSS NVR server. To meet cyber security requirements all devices shall be able to have network security harden options and the ability to disable any Bonjour or similar setting after installation.

2. Exterior outdoor 360 Degree/Multi Sensor cameras shall include exterior PTZ and exterior fixed 360 Degree/Multi Cameras within single unit. Exterior PTZ cameras should be module and attach to the Fixed 360 Degree Camera without additional network drop to be needed. To include optimized IR camera or approved equivalent. Exterior fixed 360-degree cameras shall be multi megapixel multidirectional camera with IR for 360° coverage camera that accepts PTZ module to attach or approved equivalent.

a. PTZ Camera Lenses. 32x optical, 12x digital, total 384x zoom, F1.4 -

4.0 Horizontal field of view: 58.3˚–2.4˚ Vertical field of view: 34.9˚– 1.3˚ Autofocus, auto-iris, automatic day/night, or approved equivalent, exterior fixed cameras shall use four Varifocal, 4.3-137.6 mm, F1.4 - 4.0, or approved equivalent, variable focal length lenses.

The Exterior Fixed 360 Degree Camera with four cameras within a single dome shall have a focal length sized to observe the desired 360 degree coverage area. Each head can be controlled individually to capture scenes in four directions in wide-angle or zoomed-in views.

Including 360° IR illumination with individually controllable LEDs and an automatic IR cut filter. Plus, remote zoom and focus capabilities ensure fast and accurate installation. Camera should be compliant with IP66-, NEMA 4X- and IK10-rated, or approved equivalent, shall be used for exterior applications and shall use built-in IR illumination allowing viewing range in total darkness (up to 400 m or 1300 f), or approved equivalent. The lens shall have a focal length sized to observe the desired coverage area. All exterior cameras shall be installed in the appropriate housing configuration specified above.

3. Long Range, Long Range IR PTZ Camera shall be built for long distance surveillance. Required to be outdoor-ready bullet camera delivers superior image quality in high light sensitivity and extremely high pixel density. it shall offer FIPS 140-3 Level 3 certified secure operations or better. This casing shall meet or exceed weather-protected, outdoor-ready camera is IP66-, IP67-, IK10- and NEMA 4X -rated and features a IK08-rated impact-resistant glass front window. It has an operating temperature range from -40 °C to 55 °C (-40 °F to 131 °F).

Pan, Tilt, and Zoom Camera module for Fixed 360 Degree/Multi Sensor Camera

1. PTZ cameras shall be PTZ camera Module that attaches to Exterior Fixed 360 Degree Cameras with optimized IR, or approved equivalent.

a. The PTZ camera shall have minimum of:

i. 1/2.8” Progressive scan CMOS.

ii. Fully interchangeable CPU’s, cameras, housings, communications & mounts.

iii. H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High Profiles H.265 (MPEG-H Part 2/HEVC) Main Profile Motion

JPEG.

iv. Lens F1.4 - 4.0 (4.3-137.6 mm optical).

v. Zoom 32X optical, 12X electronic, total 384x zoom.

vi. Video signal to noise >50 db.

vii. Maximum sensitivity 0.06 lux, color and 0.008 lux, black and white.

Fixed 360 Degree/Multi Sensor Camera

1. Fixed 360 camera shall be multi megapixel multidirectional camera with IR for 360° coverage, or approved equivalent that accepts PTZ module above without additional network drop.

a. The Fixed 360 Degree Camera shall have minimum of:

i. Four 5 MP camera sensors at 20 fps per channel

ii. 360° IR illumination with individually controlled LEDs

iii. Maximum sensitivity Color:0.04 lux at 50 IRE, F2.0 B/W:0.03 lux at 50 IRE, F2.0

iv. Camera Angle adjustments Pan ±90°, tilt +25 to +95°, rotation –5 to +95°, twist ±

v. Lens Horizontal field of view: 360° Vertical field of view: 84 Fixed iris, digital zoom

Long Range, Long Range IR, PTZ Camera

1. Long-Range, Long-Range IR, PTZ Camera shall be HDTV 1080p or greater.

Camera must have 31x Optical Zoom of better. It shall meet the MIL-STD- 810G standard, ensuring reliable operation in the toughest conditions. Must withstand winds up to 152 mph. With vandal-resistant IK10-rated casing and NEMA 4X, NEMA TS-2, and IP66/IP68 ratings. The camera housing shall be resistant to both harsh weather conditions and impacts. Shall have hardware-based cybersecurity platform, safeguards the device and offers FIPS 140-3 Level 3 certified secure key storage and operations.

a. The Long-Range, Long-Range IR, PTZ Camera shall have minimum of:

i. 1/2” progressive scan CMO

ii. Up to 60/50 fps (60/50 Hz) in all resolutions

iii. Minimum illumination

1. Color:0.05 lux at 30 IRE F1.36

2. B/W:0.001 lux at 30 IRE F1.36, 0 lux with IR illumination on

3. Color:0.08 lux at 50 IRE F1.36

4. B/W:0.008 lux at 50 IRE F1.36, 0 lux with IR illumination on

iv. Dynamic contrast integrated

v. IP66-, IP67-, and NEMA 4X-rated IK10 impact-resistant aluminum enclosure with integrated dehumidifying membranes, IK08 impact-resistant glass front window, anti-glare coating.

i. Pan/Tilt/Zoom

1. Pan: 360° endless, 0.05°/s to 150°/s

2. Tilt: -90° to +90°, 0.05°/s to 150°/s

3. Zoom: 31x optical zoom, 12x digital zoom

4. Preset accuracy: 0.10°

5. 300 preset positions, tour recording, guard tour, control queue, orientation aid PTZ, focus recall

Video Surveillance System

NVR

1. VSS network video recorder

a. 96 Terabyte minimum storage required

b. Raid controller with high cache memory

c. Supported Raid Levels are at a minimum 0,1,5,6,10

d. Secure device that complies or capable with TPM Trusted Platform Module per government polices.

e. Minimum support video channels 150

f. Recording bit rate minimum is 1500

g. Manufacture support and warranty

h. Windows OS required

1.

Camera Mount

2. PTZ Camera Mount

a. Heavy duty and built to with stand coastline environments.

Accommodating sensitive parts inside the mount, such as mid spans and media converters, and protect them against water intrusion. A pole parapet mount requires a pendant and other accessory to properly attach. Gaskets and seals to ensure unit and electronics inside are protected from elements.

3. Telescoping Parapet Mount

a. Outdoor pole overhang mount, Adjustable arm length of the mount.

Able to allow the camera needs to see above thick parapets or any obstructive elements on the facade of the building. Ability to connect the Ethernet cable to an RJ45 connector grip at either end of the internal fish tape to pull the Ethernet cable through the pipe. A mount that can also be used as a wall mount when there is a requirement to place the camera further out from the wall compared to standard mounts. Having the ability to swivel 180 degrees on its own axis, allows for flexible and easy mounting on both side of the wall.

Moreover, it facilitates a safe maintenance of the camera from a rooftop. Offering protection against corrosion and the aluminum material offers resistance against impacts. Including adapter to conduit and the Fixed 360 camera’s mounting hardware (i.e. pendant adapter kit) needed for type of camera purchased.

Building Mounting/Pole Mounting Hardware

4. Metal Pole Mount

a. Pole Mount versatile and robust, high-quality pole mount. Indoor and Outdoor rate but over all appropriate for outdoor installations under harsher conditions. The pole mount is designed for use with reference above wall mounts and with reference below electronic cabinet. It is easily adjustable to fit poles with a diameter between 100–410 mm (4–16 in). Pole Mount needs an IK10 rating for impact resistance, which safeguards it against vandalism. And it needs a closed back and a cable gasket, which means it would also protect against insect infestation.

5. Small Electrical Box Metal Pole Mount

a. Pole Mount is designed for both indoor and outdoor use. Available in two versions, if possible, one with steel straps for poles between 50- 150 mm (2-6 in) in diameter and one with steel straps for poles between 100-410 mm (4-16 in) in diameter. Using two marine-grade stainless steel straps with TX30 screw interface for ease and secure installation.

Electronic Enclosures

1. Robust cabinet for easy installation of critical system equipment

a. Expanded storage for use with the industrial PoE switch and power supply.

b. Vandal resistant, Standalone, outdoor-ready cabinet, specially designed for outdoor network cameras. Protecting main power and low-voltage units from tough weather and vandalism.

c. A cabinet that protects your installation against vandalism and tampering acts, it is weatherproof against the ingress of dust, water, ice and outside temperature.

d. Designed for electrical safety

e. A Cabinet fits many accessories such as power cut-off, power supply and PoE switches used for a network camera installation.

f. Enclosure shall be Polycarbonate cabinet and stainless-steel mounting plate IP66- and NEMA 4X-rated, IK10 impact-resistant stainless steel hardware camera or approved equivalent.

g. Rating for outdoor use -40 °C to 75 °C (-40 °F to 167 °F) Humidity 10-100% RH (condensing) or greater.

Electronic Power Supply/Surge Protector, Power Breaker

1. Power Breaker/Surge Protector

a. An electrical safety kit is used to ensure the safety of installers, maintainers, and the operation of the electrical equipment in the cabinet. A kit that includes surge protection, fuse and door switch (for selected electronic cabinet) and has a manual safety switch.

2. Power Supply

a. A UL certified power supply provides power for below fiber converter below (24 V DC) that is compatible with electronic cabinets reference above. With a wide operating temperature, from - 40 °C to 70 °C (-40 °F to 158 °F), it provides power to network cameras, media converters etc. even in harsh environments.

i. Rated Input Voltage: 85-277 V AC (Derating @ 100 V AC)

ii. Output Voltage: Must meet required input voltage for Industrial PoE Switch that fits in electronic cabinet

iii. Industrial POE Switch requires power with adjustable tolerances

iv. Current: 4.2A

v. Power: 100 W

vi. Ability to mount on DIN rail on expanded electronic cabinet

Industrial PoE Switch

1. Industrial PoE Switch that matches power supply output reference above.

Required to have multiple PoE+ RJ45 ports and multiple SFP slots for optical fiber connection.

a. Operating temperature: -40–75 °C (-40–167 °F)

b. Shelf or DIN-rail mount

Other Equipment

1. Other equipment list must meet the minimum charateristies of product data sheets in the following pages.

AXIS Camera Station S1296 Rack Recording Server Flexible and scalable recording server

Featuring powerful components, this secure, scalable recording server offers high performance and support for powerful applications and features. It includes AXIS Camera Station licenses and multiple RAID configurations for flexible storage and multiple redundancy configuration. And, a Trusted Platform Module (FIPS 140-2 level 2 certified) ensures secure storage of all cryptographic keys and certificates. Available in two variants with a choice of storage, it comes preloaded with preconfigured software. Plus, all supported products are available in one price list for a one-stop-shop experience.

Furthermore, it offers services such as Keep Your Hard Drive, Next Business Day Onsite Support, and a 5-year warranty.

> Scalable and powerful solution

> Flexible storage options including RAID

> Available in 2 variants: 96 TB and 192 TB

> 96 AXIS Camera Station licenses included

> Extensive support and 5-year warranty

Datasheet

AXIS Camera Station S1296 Rack Recording Server Variants S1296 Rack 96 TB

S1296 Rack 192 TB

Licenses 96 AXIS Camera Station core licenses included and tied to the hardware. Can be upgraded with additional licenses (sold separately).

System scalability

Qualified for 192 doors and a recording bitrate up to 1.5 Gbit/s, 150 video channels at 4 MP, 30 fps in a retail scenario. Check AXIS Site Designer for storage estimates.

Tested with:

20 live view clients 4 clients performing heavy playback or scrubbing operations For systems with over 100 video channels or a recording bitrate over 1 Gbit/s, we recommend setting the size allocated for recording to 95%.

Hardware Processor Intel® Xeon® Silver

Memory 2x 16 GB

Storage S1296 Rack 96 TB Hot swappable Enterprise Class HDD Total HDD slot: 12 Free HDD slot: 0 Out-of-the-box storage: 80 TB after RAID 6 Out-of-the-box capacity without RAID: 96 TB (12x8 TB) S1296 Rack 192 TB Hot swappable Enterprise Class HDD Total HDD slot: 12 Free HDD slot: 0 Out-of-the-box storage: 160 TB after RAID 6 Out-of-the-box capacity without RAID: 192 TB (12x16 TB)

RAID Factory RAID level: 6 Supported RAID levels: 0, 1, 5, 6, 10

Power 2 x 800 W hot-plug redundant power supplies (included) (100–240 V AC, 12–6.3 A, 50/60 Hz)

Connectors Front side:

1x USB 2.0 1x VGA 1x iDRAC direct port Rear side:

1x USB 2.0 1x USB 3.0 1x VGA 1x iDRAC dedicated Ethernet port 2x RJ45 1 Gbps (Do not use) 2x RJ45 10 Gbps

Video Video streaming Not intended for local viewing of video.

Recommended to use Axis workstations.

Approvals Supply chain TAA compliant

EMC EN 55032 Class A, EN 55024, EN 55035, EN 61000-3-2, EN 61000-3-3, FCC Part 2 and 15 Class A, ISED ICES-003 Class A, RCM AS/NZS CISPR 32 Class A, KS C 9832 Class A, KS C 9835, VCCI 32-1 Class A, BSMI

Safety IEC/EN/UL 60950-1, IEC/EN/UL 62368-1, EN 62311, NOM-019-SCFI-1998

Cybersecurity FIPS 140

Cybersecurity Documentation AXIS Camera Station Hardening Guide

Axis Vulnerability Management Policy Axis Security Development Model To download documents, go to axis.com/support/cybersecu-rity/resources To read more about Axis cybersecurity support, go to axis.com/cybersecurity

General Operating system Microsoft® Windows® 10 IoT Enterprise LTSC 2021

Built-in operating system recovery: yes Operating system drive: 240 GB SSD

Remote server management iDRAC 9 express license

Security Support for encrypted operating system drive and recording drive FIPS 140-2 level 2 certified Trusted Platform Module (TPM 2.0)

Operating conditions

10 °C to 35 °C (50 °F to 95 °F) Humidity 20–80% RH (non-condensing)

Storage conditions

-40 °C to 65 °C (-40 °F to 149 °F)

Dimensions 721.62 x 482 x 87 mm (28.42 x 19 x 3.43 in), 2U chassis Rail sizing:

Type: sliding Minimum rail mounting depth: 719 mm (28.31 in) Square-hole rack adjustment range:

631–868 mm (24.85–34.18 in) For more information, see the Dell EMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix

Weight S1296 Rack 96 TB 22.9kg (50.49 lb) S1296 Rack 192 TB 25.6 kg (56.44 lb)

Included accessories

Dell Ready Rails 2U Sliding Rails, 2x C13 to C14 power cords for rack PDU (Wall plug power cords are not included)

Optional accessories

Axis workstations For more accessories, see axis.com

Services Next Business Day Onsite Support Keep Your Hard Drive

Warranty 5-year warranty, see axis.com/warranty

AXIS Camera Station For details about AXIS Camera Station features and functions, see the AXIS Camera Station datasheet on axis.com www.axis.com

©2022 - 2024 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners. We reserve the right to introduce modifications without notice.

T10180501/EN/M7.2/2404

https://help.axis.com/en-us/axis-camera-station-system-hardening-guide https://help.axis.com/axis-vulnerability-management-policy https://help.axis.com/axis-security-development-model https://www.axis.com/support/cybersecurity/resources https://www.axis.com/support/cybersecurity/resources https://www.axis.com/cybersecurity https://www.axis.com https://www.axis.com/warranty https://www.axis.com

AXIS A1210 Network Door Controller Compact edge-based one door controller

Suitable for installation anywhere, this compact, competitively priced product offers fast and easy installation on walls.

Plus, it’s suitable for plenum spaces. It includes everything needed to control one door all powered by one PoE cable.

With intelligence on the edge, it can internally handle all tasks related to door access—even if the network is down. Fully integrated within Axis end-to-end solutions, this scalable product is optimized for both small and large installations and supports flexible authentication using different types of credentials. Furthermore, with built-in cybersecurity features, it prevents unauthorized access and safeguards your system.

> Complete control for one door

> Compact form factor

> Intelligence on the edge

> Built-in cybersecurity features

> Fully integrated within Axis end-to-end solutions

AXIS A1210 Network Door Controller

Door controller Readers Up to 2 OSDP readers (multi-drop) or 1 Wiegand reader per controller OSDP Secure Channel supported OSDP Secure Profile verified Integration with ASSA ABLOY Aperio® wireless lock technologies

Doors Up to 16 wireless doors

Credentials Qualified for up to 250 000 credentials stored locally

Event buffer Qualified for up to 250 000 events stored locally

Power Power in: 12 V DC, max 36 W, or Power over Ethernet (PoE) IEEE 802.3at, Type 2 Class 4 Relay: 1x relay NO/NC, max 2 A DC Power out lock: 12/24 V, jumper configurable Powered by PoE: max 900 mA at 12 V DC, max 450 mA at 24 V DC Powered by DC: max 1600 mA at 12 V DC, max 800 mA at

24 V DC

Power out reader: 12 V DC, max 500 mA Total power budget for peripheral devices (locks, readers etc.):

2100 mA at 12 V if powered by DC, 1400 mA at 12 V if powered by PoE Class 4

I/O interface Reader DC output: 12 V, max 500 mA

Data: OSDP, Wiegand I/O: Three open drain outputs, max 30 V, 100 mA each One supervised input

Door DC output: 12/24 V, jumper configurable Power output: See the Power section I/O: REX and door position sensor supervised inputs Output relays: one relay, Form-C contacts: 2 A at 30 V DC, resistive

Auxiliary DC output: 12 V, 50 mA I/O: Two ports, configurable inputs or outputs

External External tamper supervised input Alarm supervised input

Supervised input Configurable input for reader interface, door REX input, door position sensor input, and AUX Programmable end-of-line resistors, 1 K, 2.2 K, 4.7 K and 10 K, 1 %, ¼ watt standard One unsupervised input dedicated for cabinet tamper

Cable requirements Wire size for connectors: CSA: AWG 28–16, CUL/UL: AWG 30–14 DC power and relay: AWG 18-16 Ethernet and PoE: STP CAT 5e or higher Reader data (RS485): 1 twisted pair with shield, 120 ohm impedance, qualified for up to 1000 m (3281 ft) Reader data (Wiegand): Qualified for up to 150 m (500 ft) Reader powered by controller (RS485): AWG 20–16, qualified for up to 200 m (656 ft)a Reader powered by controller (Wiegand): AWG 20–16, qualified for up to 150 m (500 ft)b I/Os as inputs: Qualified for up to 200 m (656 ft)

System on chip (SoC) Memory 512 MB RAM, 2 GB Flash

Network Network protocols

IPv4, IPv6, HTTP, HTTPSc, TLSc, QoS Layer 3 DiffServ, SMTP, mDNS (Bonjour), UPnP®, SNMP v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv1/v2/v3, DHCPv4/v6, SOCKS, SSH, MQTT v3.1.1, Syslog

System integration Application Programming Interface

Open API for software integration, including VAPIX®, metadata and AXIS Camera Application Platform (ACAP); specifications at axis.com/developer-community. ACAP includes Native SDK.

One-click cloud connection

Video management systems

Compatible with AXIS Camera Station, video management software from Axis’ Application Development Partners available at axis.com/vms

Tamper detection Removal of unit cover/tamper front Reader tamper

Tilting, vibration

Approvals Product markings UL/cUL, KC, VCCI

Supply chain TAA compliant

EMC EN 55035, EN 55032 Class B, EN 61000-3-2, EN 61000-3-3 Korea: KC KN32 Class B, KC KN35

Safety IEC/EN/UL 62368-1, IEC/EN 60950-1, UL 2043, UL 294

Cybersecurity Edge security Software: Signed firmware, brute force delay protection, digest authentication, password protection Hardware: Axis Edge Vault cybersecurity platform Secure element (CC EAL 6+), secure keystore, secure boot

Network security IEEE 802.1X (EAP-TLS)c, IEEE 802.1AR, HTTPS/HSTSc, TLS v1.2/v1.3c, Network Time Security (NTS), X.509 Certificate PKI, IP address filtering

Documentation AXIS OS Hardening Guide Axis Vulnerability Management Policy Axis Security Development Model To download documents, go to axis.com/support/cybersecu-rity/resources To read more about Axis cybersecurity support, go to axis.com/cybersecurity

General Casing Aluminum

Color: white NCS S 1002-B

Mounting Wall mount DIN rail mount

Connectors Network: Shielded RJ45 10BASE-T/100BASE-TX/1000BASE-T PoE I/O: Terminal blocks for DC power, inputs/outputs, RS485/Wiegand, relay. Detachable and color coded connectors for ease of installation.

Wire size for connectors: CSA: AWG 28–16, CUL/UL: AWG 30–14

Operating conditions

0 °C to 70 °C (32 °F to 158 °F) Humidity 20–85% RH (non-condensing)

Storage conditions

-40 °C to 70 °C (-40 °F to 158 °F)

Dimensions For the overall product dimensions, see the dimension drawing in this datasheet.

Weight 645 g (1.4 lb)

Box content door controller, installation guide, connector kit (mounted), grounding kit, cable ties

Optional accessories

AXIS TA4701 Access Card AXIS TA4702 Key Fob AXIS TA1801 Top Cover AXIS TA1901 DIN Rail Clip AXIS TA1902 Access Control Connector Kitd AXIS TQ1808-VE Surveillance Cabinetd AXIS 30 W Midspand AXIS 30 W Midspan AC/DCd AXIS T8006 PS12d For more accessories, go to axis.com/products/axis-a1210

System tools AXIS Site Designer, AXIS Device Manager, product selector, accessory selector Available at axis.com

Languages English, German, French, Spanish, Italian, Russian, Simplified Chinese, Japanese, Korean, Portuguese, Polish, Traditional Chinese

Warranty 5-year warranty, see axis.com/warranty

Part numbers Available at axis.com/products/axis-a1210#part-numbers

Sustainability Substance control

PVC free, BFR/CFR free in accordance with JEDEC/ECA Standard

JS709

RoHS in accordance with EU RoHS Directive 2011/65/EU/ and

EN 63000:2018

REACH in accordance with (EC) No 1907/2006. For SCIP UUID, see echa.europa.eu

Materials Screened for conflict minerals in accordance with OECD guidelines https://www.axis.com/developer-community https://www.axis.com/vms https://help.axis.com/axis-os-hardening-guide https://help.axis.com/axis-vulnerability-management-policy https://help.axis.com/axis-security-development-model https://www.axis.com/support/cybersecurity/resources https://www.axis.com/support/cybersecurity/resources https://www.axis.com/cybersecurity https://www.axis.com/products/axis-a1210 https://www.axis.com https://www.axis.com/warranty https://www.axis.com/products/axis-a1210#part-numbers https://echa.europa.eu/scip

To read more about sustainability at Axis, go to axis.com/about-axis/sustainability

Environmental responsibility axis.com/environmental-responsibility Axis Communications is a signatory of the UN Global Compact, read more at unglobalcompact.org

a. Depending on the reader’s voltage and current input range. Evaluated with A4020-E and A4120-E.

b. Depending on the reader’s voltage and current input range.

c. This product includes software developed by the OpenSSL Project for use in the

OpenSSL Toolkit. (openssl.org), and cryptographic software written by Eric Young (eay@cryptsoft.com).

d. Not intended for UL 294 https://axis.com/about-axis/sustainability https://www.axis.com/environmental-responsibility https://www.unglobalcompact.org

Dimension drawing

Highlighted capabilities Axis Edge Vault

Axis Edge Vault is the hardware-based cybersecurity plat-form that safeguards the Axis device. It forms the founda-tion that all secure operations depend on and offer features to protect the device’s identity, safeguard its integrity and protect sensitive information from unauthorized access. For instance, secure boot ensures that a device can boot only with signed OS, which prevents physical supply chain tam-pering. With signed OS, the device is also able to validate new device software before accepting to install it. And the secure keystore is the critical building-block for protect-ing cryptographic information used for secure communica-tion (IEEE 802.1X, HTTPS, Axis device ID, access control keys etc.) against malicious extraction in the event of a secu-rity breach. The secure keystore and secure connections are provided through a Common Criteria or FIPS 140 certified hardware-based cryptographic computing module.

To read more about Axis Edge Vault, go to axis.com/solu-tions/edge-vault.

For more information, see axis.com/glossary www.axis.com

©2022 - 2024 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners. We reserve the right to introduce modifications without notice.

T10182727/EN/M13.2/2406

https://www.axis.com/solutions/edge-vault https://www.axis.com/solutions/edge-vault https://www.axis.com/glossary

AXIS P3818-PVE Panoramic Camera Seamless, 180° coverage with no blind spots

AXIS P3818-PVE delivers a 180º panoramic overview of extensive areas with ultra-high resolution images and incredible details up to 30 fps. With 13 MP resolution and seamless stitching of all three images, it offers 180° horizontal and 90° vertical coverage with no blind spots. Including a variety of mounting options, it’s also possible to mount two cameras back-to-back for a complete 360° overview, using AXIS T94V01C Dual Camera Mount. Featuring edge-to-edge technology, it’s easy to add support for audio enabling you to listen in to transactions or incidents. Additionally, built-in cybersecurity features prevent unauthorized access and safeguard your system.

> 13 MP multisensor camera with one IP address

> 180° horizontal, 90° vertical coverage

> Seamlessly stitched images

> Support for audio input

> Built-in cybersecurity features

AXIS P3818-PVE Panoramic Camera

Camera Image sensor 3 x 5 MP 1/2.8” progressive scan RGB CMOS

Lens Fixed 3.2 mm, F2.0 Horizontal field of view: 180° Vertical field of view: 90°

Day and night Automatically removable infrared-cut filter

Minimum illumination

With Forensic WDR and Lightfinder:

Color: 0.16 lux, F2.0 B/W: 0.05 lux, F2.0

Shutter speed 1/91000 to 1/25 s With WDR: 1/50000 to 1/25 s

Camera angle adjustment

Pan +/- 180° Tilt 0° to 50° Roll +/- 5°

System on chip (SoC) Model ARTPEC-7 (x2)

Memory 2048 MB RAM (x2), 512 MB Flash

Video Video compression

H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High Profiles H.265 (MPEG-H Part 2/HEVC) Main Profile Motion JPEG

Resolution 5120x2560 (13.1 MP) to 256x128

Frame rate 13.1 MP @ 25/30 fps (50/60 Hz) WDR

Video streaming 13.1 MP: 1 configurable stream in H.264, H.265 and Motion JPEG in full frame rate Controllable frame rate and bandwidth

VBR/ABR/MBR H.264/H.265

Low latency mode

Image settings Saturation, contrast, brightness, sharpness, Forensic WDR: up to 120 dB depending on scene, white balance, day/night threshold, exposure mode, compression, dynamic text and image overlay, orientation aid, exposure control, noise reduction, fine tuning of behavior at low light, polygon privacy masks

Audio Audio streaming Two-way audio via edge-to-edge technology

Audio input/output

External microphone input, line input, digital audio input, automatic gain control, network speaker pairing

Audio encoding 24bit LPCM, AAC-LC 8/16/32/48 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz, Opus 8/16/48 kHz, 44.1 kHz ACC-LC, LPCM Configurable bit rate

Network Security IP address filtering, HTTPSa encryption, IEEE 802.1X (EAP-TLS)a network access control, user access log, centralized certificate management, signed video, Axis Edge Vault, Axis device ID, secure keystore (CC EAL4 certified), TPM (FIPS 140-2 certified)

Network protocols

IPv4, IPv6 USGv6, ICMPv4/ICMPv6, HTTP, HTTP/2, HTTPSa, TLSa, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, mDNS (Bonjour), UPnP®, SNMP v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, NTS, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCPv4/v6, ARP, SSH, LLDP, CDP, MQTT, Secure syslog (RFC 3164/5424, UDP/TCP/TLS), Link-Local address (ZeroConf)

System integration Application Programming Interface

Open API for software integration ONVIF® Profile G, ONVIF® Profile M, ONVIF® Profile S and ONVIF® Profile T, specification at onvif.org

Event conditions Analytics, external input, supervised external input, edge storage events, virtual inputs through API Audio: audio detection Digital audio: digital signal contains Axis metadata, digital signal as invalid sample rate, digital signal missing, digital signal ok Device status: above operating temperature, above or below operating temperature, below operating temperature, fan failure, IP address removed, network lost, new IP address, shock detected, storage failure, system ready, within operating temperature, casing open, ring power overcurrent protection Edge storage: recording ongoing, storage disruption, storage health issues detected

I/O: digital input, manual trigger, virtual input MQTT subscribe Scheduled and recurring: scheduled event Video: live stream open, average bitrate degradation, day-night mode, tampering

Event actions Day/night mode, overlay text, video recording to edge storage, pre- and post-alarm video buffering, send SNMP trap, play audio clipm I/O events, status LED events File upload: FTP, SFTP, HTTP, HTTPS network share, email MQTT publish Notification: email, HTTP, HTTPS TCP

Data streaming Event data

Built-in installation aids

Pixel counter, leveling guide

Analytics Applications Included

AXIS Fence Guard, AXIS Motion Guard, AXIS Loitering Guard AXIS Video Motion Detection, active tampering alarm, audio detection Supported Support for AXIS Camera Application Platform enabling installation of third-party applications, see axis.com/acap

Approvals EMC EAC, CISPR 24, CISPR 35, EN 55024, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-6-1, EN 61000-6-2

Australia/New Zealand: RCM AS/NZS CISPR 32 Class A Canada: ICES-3(A)/NMB-3(A) Japan: VCCI Class A Korea: KC KN35, KC KN32 Class A USA: FCC Part 15 Subpart B Class A Railway: IEC 62236-4

Safety CAN/CSA C22.2 No. 62368-1 ed. 3, CAN/CSA C22.2 No. 60950-22, IEC/EN/UL 62368-1, IEC/EN/UL 60950-22, IS 13252

Environment IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-78, IEC/EN 60529 IP66/IP67, IEC/EN 62262 IK10, NEMA 250 Type 4X, NEMA TS 2 (2.2.7-2.2.9), MIL-STD-810H (Method 501.7), 502.7, 505.7, 506.6, 507.6, 509.7, 512.6

Network NIST SP500-267

Cybersecurity ETSI EN 303 645, FIPS 140

Cybersecurity Edge security Software: Signed OS, brute force delay protection, digest authentication and OAuth 2.0 RFC6749 OpenID Authorization Code Flow for centralized ADFS account management, password protection, AES-XTS-Plain64 256bit SD card encryption Hardware: Axis Edge Vault cybersecurity platform TPM 2.0 (CC EAL4+, FIPS 140-2 Level 2), secure element (CC EAL 6+), Axis device ID, secure boot

Network security IEEE 802.1X (EAP-TLS, PEAP-MSCHAPv2)a, IEEE 802.1AE (MACsec PSK/EAP-TLS), IEEE 802.1AR, HTTPS/HSTSa, TLS v1.2/v1.3a, Network Time Security (NTS), X.509 Certificate PKI, host-based firewall

Documentation AXIS OS Hardening Guide Axis Vulnerability Management Policy Axis Security Development Model AXIS OS Software Bill of Material (SBOM) To download documents, go to axis.com/support/cybersecu-rity/resources To read more about Axis cybersecurity support, go to axis.com/cybersecurity

General Casing IP66-/IP67- and NEMA 4X-rated, IK10-rated impact-resistant casing with polycarbonate hard coated clear dome, aluminum base and dehumidifying membrane Color: white NCS S 1002-B Casing open detection For repainting instructions and impact on warranty, contact your distributor partner.

https://www.onvif.org https://www.axis.com/acap https://help.axis.com/axis-os-hardening-guide https://help.axis.com/axis-vulnerability-management-policy https://help.axis.com/axis-security-development-model https://www.axis.com/support/cybersecurity/resources https://www.axis.com/support/cybersecurity/resources https://www.axis.com/cybersecurity

Mounting Mounting bracket with junction box holes (double-gang, single-gang, 4” square, and 4” octagon) and for wall or ceiling mount ¾” (M25) conduit side entries

Sustainability PVC free, 20% recycled plastic

Power Power over Ethernet (PoE) IEEE 802.3at Type 2 Class 4 Typical 11 W, max 18 W

Connectors Shielded RJ45 1000BASE-T Terminal block for two configurable supervised inputs/digital outputs (12 V DC output, max load 50 mA), 3.5 mm analog/digital mic/line in

Storage Support for microSD/microSDHC/microSDXC card Support for SD card encryption (AES-XTS-Plain64 256bit) Support for recording to network-attached storage (NAS)

Operating conditions

-40 °C to 50 °C (-40 °F to 122 °F) Humidity 10–100% RH (condensing) Maximum temperature according to NEMA TS 2 (2.2.7): 74 °C (165 °F) Start-up temperature: -40 °C

Storage conditions

-40 °C to 65 °C (-40 °F to 149 °F) Humidity 5-95% RH (non-condensing)

Dimensions Height: 170 mm (6.6 in) Width in diameter: 195 mm (7.6 in)

With weathershield:

Height 221 mm (8.7 in) Width 206 mm (8.1 in)

Weight 2.2 kg (4.9 lb)

Mounting height Recommended: 4–15 m

Included accessories

Installation guide, Windows® decoder 1-user license, weathershield, RESITORX® T20 bit, connector guard

Optional accessories

AXIS T8415 Wireless Installation Tool AXIS Surveillance Cards AXIS TQ3102 Pendant Kit AXIS TQ3101-E Pendant Kit AXIS TQ3201-E Recessed Mountb AXIS T94V01C Dual Camera Mount For more accessories, see axis.com

Languages English, German, French, Spanish, Italian, Russian, Simplified Chinese, Japanese, Korean, Portuguese, Traditional Chinese, Dutch, Czech, Swedish, Finnish, Turkish, Thai, Vietnamese

Warranty 5–year warranty, see axis.com/warranty

a. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (openssl.org), and cryptographic software written by Eric Young (eay@cryptsoft.com).

b. The camera’s tampering alarm doesn’t work when mounted in AXIS TQ3201-E Recessed Mount www.axis.com

©2021 - 2024 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners. We reserve the right to introduce modifications without notice.

T10162909/EN/M22.2/2406

AXIS Q6100-E Network Camera For 360° real-time monitoring and great detail

With four 5 MP sensors, AXIS Q6100-E provides a complete 360° overview with great image usability day and night.

Designed for use with any AXIS Q61 Series or AXIS Q63 Series camera, it enables one-click PTZ control and autopilot for automatic PTZ tracking within the viewing areas. Directional audio detection triggered by audio incidents redirects the PTZ camera to the audio source. Each sensor has exchangeable lenses with autofocus for maximum flexibility and accurate configuration. AXIS Camera Heater Power Supply is required when an AXIS Q63 Series is used.

> 360° camera with one-click PTZ control

> 4 x 5 MP sensors, total 20 MP resolution

> Exchangeable and tiltable lenses

> Requires an AXIS Q61 Series or AXIS Q63 Series camera

> Directional audio detection included

AXIS Q6100-E Network Camera Variants AXIS Q6100-E 50 Hz

AXIS Q6100-E 60 Hz

Camera Supported products

AXIS Q61-E PTZ Network Cameras AXIS Q63-E PTZ Network Cameras

Image sensor 4 x 5 MP progressive scan RGB CMOS 1/2.5”

Lens Autofocus lenses, Fixed iris, F2.0, Focal length: 2.8 mm Horizontal field of view: 360° Vertical field of view: 84°

Day and night Automatically removable infrared-cut filter

Minimum illumination

Color: 0.4 lux at 50 IRE, F2.0 B/W: 0.03 lux at 50 IRE, F2.0

Shutter speed 1/32500 to 1/20 s

Camera angle adjustment

Pan, tilt and rotate

Pan/Tilt/Zoom One-click PTZ control

System on chip (SoC) Model S5

Memory 2048 MB RAM, 512 MB Flash

Video Video compression

H.264 (MPEG-4 Part 10/AVC), Main and High Profiles H.265 (MPEG-H Part 2/HEVC), Main Profile

Resolution 4 x 2592x1944 to 320x240 Default: 2592x1944

Frame rate Up to 20 fps (50/60 Hz) in all resolutions

Video streaming Multiple, individually configurable streams in H.264 and H.265 Axis Zipstream technology in H.264 and H.265 Controllable frame rate and bandwidth

VBR/ABR/MBR H.264/H.265

Image settings Resolution, compression, saturation, brightness, sharpness, contrast, white balance, exposure level, exposure mode, shutter & gain fine tuning of behavior at normal and low light, polygon privacy masks (maximum 8 per channel), WDR, dynamic text and image overlay

Network Network protocols

IPv4, IPv6 USGv6, ICMPv4/ICMPv6, HTTP, HTTPS, HTTP/2, TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, mDNS (Bonjour), UPnP®, SNMP v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, NTS, RTSP, RTP, SRTP, TCP, UDP, IGMP, RTCP, ICMP, DHCPv4/v6, ARP, SSH, NTCIP, LLDP, CDP, MQTT v3.1.1, Secure syslog (RFC 3164/5424, UDP/TCP/TLS), Link-Local address (ZeroConf)

System integration Application Programming Interface

Open API for software integration, including VAPIX® and AXIS Camera Application Platform; specifications at axis.com One-click cloud connection ONVIF® Profile G, ONVIF® Profile M, ONVIF® Profile S, and ONVIF® Profile T, specification at onvif.org

Analytics Included Directional audio detection, autopilot, AXIS Motion Guard, AXIS Fence Guard, and AXIS Loitering Guard, AXIS Video Motion Detection, active tampering alarm, edge storage events Support for AXIS Camera Application Platform enabling installation of third-party applications, see axis.com/acap

Event conditions Analytics, edge storage events, virtual inputs through API Device status: above operating temperature, above or below operating temperature, below operating temperature, fan failure, IP address removed, network lost, new IP address, storage failure, system ready, within operating temperature Edge storage: recording ongoing, storage disruption I/O: manual trigger, virtual input MQTT subscribe PTZ: PTZ ready Scheduled and recurring: scheduled event Video: day-night mode, live stream open, tampering

Event actions Record video: SD card and network share Upload of images or video clips: FTP, SFTP, HTTP, HTTPS, network share and email

Pre- and post-alarm video or image buffering for recording or upload Notification: email, HTTP, HTTPS, TCP and SNMP trap PTZ: PTZ preset Overlay text, day/night mode, Status LED, WDR mode MQTT publish

Data streaming Event data

Built-in installation aids

Installation focus, lens selection, positioning calibration, PTZ remote connection

Cybersecurity Edge security Signed OS, brute force delay protection, digest authentication and OAuth 2.0 RFC6749 OpenID Authorization Code Flow for centralized ADFS account management, password protection, encrypted file system (AES-XTS-Plain64 256bit)

Network security IEEE 802.1X (EAP-TLS, PEAP-MSCHAPv2), HTTPS/HSTS, TLS v1.2/v1.3, Network Time Security (NTS), X.509 Certificate PKI, host-based firewall

Documentation AXIS OS Hardening Guide Axis Vulnerability Management Policy Axis Security Development Model AXIS OS Software Bill of Material (SBOM) To download documents, go to axis.com/support/cybersecu-rity/resources To read more about Axis cybersecurity support, go to axis.com/cybersecurity

General Casing IP66-, NEMA 4X- and IK10-rated

Polycarbonate hardcoated dome Aluminum casing

Sustainability PVC free

Power AXIS Q6100-E with Solo Kit (without a PTZ):

Power consumption: typical 9 W, max 23 W External power input 24 VDC: typical 8.6 W, max 75 W

AXIS T8154: 100-240 VAC

AXIS Q6100-E with AXIS Q61-E PTZ Network Cameras:

AXIS High PoE midspan 1-port 100-240 VAC, max 60 W recommended AXIS Q6100-E with AXIS Q63-E PTZ Network Cameras:

AXIS High PoE midspan 1-port 100-240 VAC, max 60 W recommended, plus AXIS Camera Heater Power Supply (required when used with AXIS Q63-E PTZ Network Camera)

Connectors RJ45 10BASE-T/100BASE-TX/1000BASE-T PoE RJ45 10BASE-T/100BASE-TX/1000BASE-T Q61-E port M8 3-pin AC/DC input

Storage Support for SD/SDHC/SDXC card and encryption Recording to network-attached storage (NAS) For SD card and NAS recommendations see axis.com

Operating conditions

-50 °C to 50 °C (-58 °F to 122 °F) with AXIS Camera Heater Power Supply -40 °C to 50 °C (-40 °F to 122 °F) Maximum temperature according to NEMA TS 2 (2.2.7): 74 °C (165 °F) Start-up temperature: -40 °C (-40 °F) Humidity 10–100% RH (condensing)

Storage conditions

-40 °C to 65 °C (-40 °F to 149 °F) Humidity 5–95% RH (non-condensing)

Approvals EMC EAC, EN 55032 Class A, EN 55035, EN 50121-4, IEC 62236-4, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-3(A)/NMB-3(A), VCCI Class A, RCM AS/NZS CISPR 32 Class A, KC KN32 Class A, KN35 Safety IEC/EN/UL 62368-1, CAN/CSA C22.2 No. 62368-1, IEC/EN/UL 60950-22, CAN/CSA-C22.2 No. 60950-22, IS 13252 Environment

IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14,

IEC 60068-2-27, IEC 60068-2-78, IEC/EN 60529 IP66,

IEC/EN 62262 IK10, NEMA 250 Type 4X, NEMA TS 2 (2.2.7-2.2.9) Network

NIST SP500-267

Dimensions ø 361 mm (14.2 in) Height: 192 mm (7.6 in) https://www.axis.com https://www.onvif.org https://www.axis.com/acap https://help.axis.com/axis-os-hardening-guide https://help.axis.com/axis-vulnerability-management-policy https://help.axis.com/axis-security-development-model https://www.axis.com/support/cybersecurity/resources https://www.axis.com/support/cybersecurity/resources https://www.axis.com/cybersecurity

Weight 4.0 kg (8.8 lb)) excluding an AXIS Q61-E PTZ Network Camera or AXIS Q63-E PTZ Network Camera

Included accessories

AXIS Q61-E and AXIS Q63-E adapter, bayonet screws, installation guide, Windows® decoder 1-user license

Required accessories

AXIS Camera Heater Power Supply is required when an AXIS Q63 Series is used.

Optional accessories

Axis Lens M12 6 mm 5P, Axis Lens M12 12 mm 5P, Axis Lens M12 16 mm 5P, Axis Lens M12 25 mm 5P, AXIS T91 Mounting accessories, Axis Midspan 60 W 1–port, AXIS Camera Heater Power Supply

For more accessories, see axis.com

Video management software

AXIS Companion, AXIS Camera Station, video management software from Axis Application Development Partners available at axis.com/vms

Languages English, German, French, Spanish, Italian, Russian, Simplified Chinese, Japanese, Korean, Portuguese, Polish, Traditional Chinese, Dutch, Czech, Swedish, Finnish, Turkish, Thai, Vietnamese

Warranty 5-year warranty, see axis.com/warranty www.axis.com

©2020 - 2024 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners. We reserve the right to introduce modifications without notice.

T10145239/EN/M32.2/2407

https://www.axis.com https://www.axis.com/vms

AXIS Q6135-LE PTZ Network Camera High-speed PTZ with long-range optimizedIR

AXIS Q6135-LE offers HDTV 1080p with 32x optical zoom. It features OptimizedIR up to 250 m (820 ft) or more depend-ing on the scene and Lightfinder 2.0 for clear, sharp images even in challenging light. Sharpdome technology allows you to see 20° above the horizon with the same sharp image quality as below. It includes orientation aid and autotracking 2 with click and track functionality. Privacy masking with mosaic lets you pixelate whole areas of the scene. It includes enhanced security features such as signed firmware, secure boot and TPM module. Plus, Axis Zipstream with support for H.264 and H.265.

> HDTV 1080p with 32x optical zoom

> OptimizedIR (250 m/820 ft range)

> Lightfinder 2.0

> Autotracking 2 and orientation aid

> TPM, FIPS 140-2 level 2 certified

AXIS Q6135-LE PTZ Network Camera Variants AXIS Q6135-LE 50 Hz

AXIS Q6135-LE 60 Hz

Camera Image sensor 1/2.8” Progressive scan CMOS

Lens Varifocal, 4.3-137.6 mm, F1.4 - 4.0 Horizontal field of view: 58.3˚–2.4˚ Vertical field of view: 34.9˚–1.3˚ Autofocus, auto-iris

Day and night Automatically removable infrared-cut filter

Minimum illumination

Color: 0.06 lux at 30 IRE F1.4 B/W: 0.008 lux at 30 IRE F1.4, 0 lux with IR illumination on Color: 0.09 lux at 50 IRE F1.4 B/W: 0.01 lux at 50 IRE F1.4, 0 lux with IR illumination on

Shutter speed 1/66500 s to 2s

Pan/Tilt/Zoom Pan: 360° endless, 0.05°–700°/s Tilt: +20 to -90°, 0.05°–500°/s Zoom: 32x optical, 12x digital, total 384x zoom Nadir flip, 256 preset positions, tour recording (max 10, max duration 16 minutes each), guard tour (max 100), control queue, on-screen directional indicator, orientation aid PTZ, set new pan 0°, adjustable zoom speed, speed dry

System on chip (SoC) Model ARTPEC-7

Memory 1024 MB RAM, 512 MB Flash

Compute capabilities

Machine learning processing unit (MLPU)

Video Video compression

H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High Profiles H.265 (MPEG-H Part 2/HEVC) Main Profile Motion JPEG

Resolution 1920x1080p (HDTV 1080p) to 320x180

Frame rate Up to 50/60 fps (50/60 Hz) in 1080p

Video streaming Multiple, individually configurable streams in H.264, H.265 and Motion JPEG Axis Zipstream technology in H.264 and H.265 Controllable frame rate and bandwidth

VBR/ABR/MBR H.264/H.265

Low latency mode

Image settings Compression, saturation, brightness, sharpness, contrast, local contrast, white balance, exposure control, exposure zones, Forensic WDR: Up to 120 dB depending on scene, defogging, day/night shift level, tone mapping, fine tuning of low-light behavior, rotation: 0°, 180°, text and image overlay, image freeze on PTZ, electronic image stabilization (EIS), scene profiles, 32 individual polygon privacy masks

Audio Audio input/output

Audio features through portcast technology: two-way audio connectivity, voice enhancer

Network Network protocols

IPv4, IPv6 USGv6, ICMPv4/ICMPv6, HTTP, HTTPS, HTTP/2, TLS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, mDNS (Bonjour), UPnPTM, SNMP v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, NTS, RTSP, RTP, SRTP/RTSPS, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCPv4/v6, ARP, SSH, NTCIP, LLDP, CDP, MQTT v3.1.1, Secure syslog (RFC 3164/5424, UDP/TCP/TLS), Link-Local address (ZeroConf)

System integration Application Programming Interface

Open API for software integration, including VAPIX® and AXIS Camera Application Platform; specifications at axis.com One-Click Cloud Connection ONVIF® Profile G, ONVIF® Profile M, ONVIF® Profile S, and ONVIF® Profile T, specification at onvif.org

Event conditions Analytics Device status: above operating temperature, above or below operating temperature, below operating temperature, fan failure, IP address removed, network lost, new IP address, shock detected, storage failure, system ready, within operating temperature Edge storage: recording ongoing, storage disruption I/O: manual trigger, virtual input MQTT subscribe

PTZ: PTZ malfunctioning, PTZ movement, PTZ preset position reached, PTZ ready, PTZ autotracking Scheduled and recurring: scheduled event Video: live stream open,day/night mode

Event actions Record video: SD card and network share Pre- and post-alarm video or image buffering for recording or upload Upload of images or video clips: FTP, SFTP, HTTP, HTTPS, network share, and email Notification: email, HTTP, HTTPS, TCP, and SNMP trap PTZ: PTZ preset, guard tour Overlay text, day/night mode WDR mode IR illumination MQTT publish

Built-in installation aids

Pixel counter, leveling guide

Analytics Applications Included

AXIS Object Analytics, AXIS Scene Metadata, AXIS Video Motion Detection, AXIS Motion Guard, AXIS Fence Guard, AXIS Loitering Guard, Autrotracking 2, Active Gatekeeper Support for AXIS Camera Application Platform enabling installation of third-party applications, see axis.com/acap

AXIS Object Analytics

Object classes: humans, vehicles Scenarios: line crossing, object in area, crossline counting, time in area Up to 10 scenarios Other features: triggered objects visualized with trajectories, color-coded bounding boxes and tables Polygon include/exclude areas Perspective configuration ONVIF Motion Alarm event

AXIS Scene Metadata

Object classes: humans, faces, vehicles (types: cars, buses, trucks, bikes), license plates Object attributes: confidence, position

Approvals EMC EN 55032 Class A, EN 55035,EN 55024, EN 50121-4, IEC 62236-4, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2

Australia/New Zealand: RCM AS/NZS CISPR 32 Class A Canada: ICES-3(A)/NMB-3(A) Japan: VCCI Class A Korea: KC KN32 Class A, KN35 USA: FCC Part 15 Subpart B Class A

Safety IEC/EN/UL 62368-1, IEC/EN/UL 60950-22, IEC/EN 62471 risk group 2, IS13252

Environment IEC/EN 62262 IK08, IEC/EN 60529 IP66, NEMA 250, Type 4X, NEMA TS 2 (2.2.7–2.2.9), IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-30, IEC 60068-2-78, ISO4892-2

Network NIST SP500-267

Cybersecurity ETSI EN 303 645, FIPS 140 For midspan approvals, see: axis.com/products/axis-t8154-60-w-sfp-midspan

Cybersecurity Edge security Software: Signed OS, brute force delay protection, digest authentication and OAuth 2.0 RFC6749 OpenID Authorization Code Flow for centralized ADFS account management, password protection, AES-XTS-Plain64 256bit SD card encryption Hardware: Axis Edge Vault cybersecurity platform TPM 2.0 (CC EAL4+, FIPS 140-2 Level 2), secure keystore, secure boot

Network security IEEE 802.1X (EAP-TLS, PEAP-MSCHAPv2), IEEE 802.1AE (MACsec PSK/EAP-TLS), HTTPS/HSTS, TLS v1.2/v1.3, Network Time Security (NTS), X.509 Certificate PKI, host-based firewall

Documentation AXIS OS Hardening Guide Axis Vulnerability Management Policy Axis Security Development Model AXIS OS Software Bill of Material (SBOM) https://www.axis.com https://www.onvif.org https://www.axis.com/acap https://www.axis.com/products/axis-t8154-60-w-sfp-midspan https://www.axis.com/products/axis-t8154-60-w-sfp-midspan https://help.axis.com/axis-os-hardening-guide https://help.axis.com/axis-vulnerability-management-policy https://help.axis.com/axis-security-development-model

To download documents, go to axis.com/support/cybersecu-rity/resources To read more about Axis cybersecurity support, go to axis.com/cybersecurity

General Casing IK08, IK10 housing and mountinga, IP66- and NEMA 4X-rated

Repaintable metal casing (aluminum), hard coated Polycarbonate (PC) clear dome with Sharpdome technology

Sustainability PVC free

Power Axis High PoE midspan 1-port: 100–240 V AC, max 74 W Camera…