CBD24C-T001.pdf
PDF 57 KB Posted
- Attached to
- Cost Effective Synthesis and Processing of Novel Porous Organic Polymers for Protective Applications
- Solicitation number
- CBD24C-T001
About this file
CBD24C-T001: Cost Effective Synthesis and Processing of Novel Porous Organic Polymers for Protective Applications
This is a Department of Defense Small Business Innovation Research (SBIR) topic solicitation focused on Chemical and Biological Defense technologies within the Biotechnology modernization priority. The objective is to develop and demonstrate scaled synthesis of porous organic polymers (POPs)—specifically polymers of intrinsic microporosity (PIMs) and covalent organic frameworks (COFs)—and process them into functional form factors for protective applications. POPs are porous materials with high efficacy in adsorption and catalysis applications for toxic chemical removal and sensing. The primary barrier to implementation is the high cost of large-scale synthesis and processing due to expensive monomers, harsh synthesis conditions, complex purification procedures, and difficult processing into useful form factors such as fibers, films, and foams.
Phase I requires offerors to develop synthesis approaches for at least 2 POPs at 1 kg scale with minimum porosity of 500 m²/g, amenability to post-synthetic modification, and demonstrated substantial uptake and reaction toward toxic chemicals including chlorine, nitrogen dioxide, ammonia, and sulfur dioxide. Phase II requires scaling POP synthesis to 20-100 kg quantities with optimized cost-effective synthesis routes and development of at least one functional form (granule, bead, fiber, or foam) with mechanical robustness of minimum 5 GPa modulus and 0.5 GPa strength, targeting NIOSH CBRN chemicals. Phase III focuses on developing fully functional prototypes and collaborating with industry partners to commercialize technologies such as filters, textiles, suits, foams, and sensors for applications including first responder personnel protection, pesticide application, industrial waste treatment, water filtration, and gas storage. No CMMC requirement applies. No Technical Point of Contact is listed.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CBD_STTR_24C.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CBD24C-T001: Cost Effective Synthesis and Processing of Novel Porous Organic Polymers for Protective Applications
PROJECTED CMMC LEVEL REQUIREMENT:
N/A
TECHNOLOGY AREAS:
Chem Bio Defense
MODERNIZATION PRIORITIES:
Biotechnology
KEYWORDS:
porous organic polymer, covalent organic framework, polymers of intrinsic microporosity, protection, filtration, scaling, engineering, forming
ADDITIONAL INFORMATION
N/A
OBJECTIVE:
Develop and demonstrate the scaled synthesis of porous organic polymers (POPs) such as polymers of intrinsic microporisity (PIMs) or covalent organic frameworks (COFs) and process them into functional form factors for protection applications.
DESCRIPTION:
This topic seeks to scale the synthesis and processing of POPs to quantities sufficient for developing and integrating novel polymer-based protection technologies. POPs are a family of functional porous materials made from light elements with intrinsic porosity based on a set of rigid or semi-rigid building blocks. POPs can be amorphous or highly crystalline and are highly effective in adsorption and catalysis applications. PIMs have high capacities towards a variety of toxic chemicals due to their microporous nature and have some advantages over current filtration materials.1 COFs are also highly porous with tunable pore size and shape and have been shown to be highly effective in various filtration applications.2,3 The chemistry of both classes can be tuned to include different chemical functionalities on the pore walls that absorb and react with various chemicals and provide broad spectrum protection.4,5 PIMs and COFs can be processed into various form factors, including fibers, films, and foams, lending them useful in technologies such as novel helmet-integrated filters, textiles, and coatings.6-8 Furthermore, PIMs and COFs can change their refractive index or luminescence upon chemical adsorption, allowing for multifunctional sensing materials.9,10 The primary limitation to further implementation is related to the cost of large-scale synthesis and processing.
Many of the monomers required to form PIMs or COFs are expensive, the synthesis conditions require harsh solvents at high temperatures and require complicated purification procedures to access high surface area materials. Similarly, processing into useful form factors also requires harsh solvents and in the case of COFs, in can be difficult to access sufficiently large crystal sizes and alignment.
Thus, we seek the development of novel synthesis and processing approaches to access POPs on sufficiently large scales to make functional forms, such as fibers, films, and foam. Multiple PIMs, COFs or other POPs will be synthesized targeting toxic industrial chemical removal (threshold) and sensing (objective). Target chemicals include, but are not limited to, chlorine, nitrogen dioxide, ammonia, and sulfur dioxide.
PHASE I:
The offeror(s) shall develop an approach to synthesis at least 2 POPs at a scale of 1 kg. Optionally, POPs can be used as functional binders to complement activity of other porous materials such as metal-organic frameworks (MOFs). The materials synthesized will have a minimum porosity of 500 m2/g and be amenable to post-synthetic modification allowing for the integration of appropriate nucleophilic species. The offeror(s) shall perform a preliminary study of the detoxification of a chemical warfare agent simulant and will show substantial uptake
(similar to broad spectrum reactive carbons) and reaction towards toxic chemicals of interest.
PHASE II:
The offerer(s) shall build upon the method developed in Phase I to scale up POP synthesis to 20-100 kg quantities and optimize synthesis routes to minimize cost. Furthermore, cost-effective processing routes will be developed to transform powdered POPs into at least 1 functional form (e.g. granule, bead, fiber, foam) useful for filtration which should be mechanically robust with a modulus of at least 5 GPa and strength of at least 0.5 GPA. Alternatively, the offerer(s) may develop a hybrid approach where the POP is both synthesized and processed in a single step from the constituent building blocks. Development of form factors and prototype filters will be initiated targeting NIOSH CBRN chemicals.
PHASE III DUAL USE APPLICATIONS:
PHASE III: The offerer(s) shall build upon methods developed in Phase I and Phase II to develop a fully functional prototype and collaborate with industry partners to develop technologies such as novel filters, textiles/suits, foams, sensors, and more.
PHASE III DUAL USE APPLICATIONS: First responder personnel, pesticide applications personnel, industrial/lab waste kits, water filtration, gas storage, etc. would all benefit from a health & safety perspective resulting from the proposed technology.
REFERENCES:
Jung D., Das P., Atilgan A., Hupp J. T., Islamoglu T., Kalow J.A., Farha O. K. “Reactive Porous Polymers for Detoxification of a Chemical Warfare Agent Simulant” Chem. Mater. 2020, 32 (21), 9299.
1.
Tan K.T., Ghosh S., Wang Z. et al. Covalent organic frameworks. Nat Rev Methods Primers 2023, 3,1.2.
Yuan S., Li X., Zhu J., Zhang G., Puyvelde P. V., Van der Bruggen B. “Covalent Organic Frameworks for Membrane Separation” Chem. Soc. Rev. 2019, 48, 2665.
3.
Jung D., Chen Z., Alayoglu S., Mian M. R., Goetjen T. A., Idrees K. B., Kirlikovali K. O., Islamoglu T., Farha O. K.
“Postsynthetically Modified Polymers of Intrinsic Microporosity (PIMs) for Capturing Toxic Gases” ACS Appl.
Mater. Interfaces 2021, 13 (8), 10409.
4.
Segura J. L., Royuela S., Ramos M. M. “Post-synthetic Modification of Covalent Organic Frameworks” Chem.
Soc. Rev. 2019, 48, 3903.
5.
Topuz F., Abdellah M. H., Budd P. M., Abdulhamid M. A. “Advances in Polymers of Intrinsic Microporosity (PIMs)-Based Materials for Membrane, Environmental, Catalysis, Sensing and Energy Applications” Polymer Reviews 2024, 64 (1), 251.
6.
Snider V. G., Hill C. L. “Functionalized reactive polymers for the removal of chemical warfare agents: A review” Journal of Hazardous Materials 2023, 442, 130015.
7.
Barnes M. G., McLeod D. C., Lambeth R. H. “Highly Crystalline, Free-Standing Covalent Organic Framework Films Produced Directly from Monomer Solutions” ACS Appl. Polym. Mater. 2022, 4, 2017.
8.
Rakow N. A., Wendland M. S., Trend J. E., Poirier R. J., Paolucci D. M., Maki S. P., Lyons C. S., Swierczek M. J.
“Visual Indicator for Trace Organic Volatiles” Langmuir 2010, 26 (6), 3767.
9.
Liu X., Huang D., Lai C., Zeng G., Qin L., Wang H., Yi H., Li B., Liu S., Zhang M., Deng R., Fu Y., Li L., Xue W., Chen S. “Recent advances in covalent organic frameworks (COFs) as a smart sensing material” Chem. Soc.
Rev. 2019, 48, 5266.
10.
TECHNICAL POINT OF CONTACT (TPOC):
None
File details come from the government source that posted it. Updated .