CAR 1352.209-74.docx

CAR Clause DOCX document 28 KB Posted

Attached to
Repair and Reconditioning services for SENSOR, FREEZING RAIN ROSEMONT PN: 00872C3, ASN: S100-2MT3-1
Solicitation number
NRC142082-25-0271
Issued by

About this file

This document is a Federal Acquisition Regulation (FAR) clause addressing organizational conflict of interest (OCI) for federal contracts. The clause aims to ensure contractors and subcontractors are not biased by financial, contractual, or organizational interests and do not gain unfair competitive advantages. Key provisions include mandatory disclosure of potential conflicts, contractor responsibilities for identifying and mitigating conflicts at all subcontractor levels, and potential remedies such as contract termination, suspension, or debarment if conflicts are not properly addressed or disclosed.

The related federal contract opportunity is a small business set-aside solicitation (RFQ No. NRC142082-25-0271) issued by the Department of Commerce's National Oceanic and Atmospheric Administration (NOAA). The requirement is for repair and reconditioning services for 65 Freezing Rain Rosemont Sensors (PN: 00872C3, ASN: S100-2MT3-1). The procurement will result in a firm-fixed price purchase order under NAICS code 811210 with a size standard of $34.0M. Vendors must demonstrate the ability to restore the equipment to manufacturer specifications, and no partial quotes or awards will be considered.

View the file

Other versions and copies of CAR 1352.209-74

File Revision Posted Attached to
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Purchase of Boxes for NLSC Logistics
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair and Calibration of the following test equipment: T313-1, T313-2, T229, T374, T605, T153 and T800
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair and Reconditioning services IAW the Statement of Work (SOW) attached, CPU BOARD, FIRMWARE 2. 0, AAI PN: 62828-47006-30 (PROGRAMMED FOR DATA COLLECTION), ASN: S100-2A1A2A1.
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair services for the following equipment, OPTICAL TRANSMITTER BELFORT PN: 32315, AAI PN: 62826-90111-3, ASN: S100-2MT5A2A3.
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair and Recondition the following equipment: 65 each OPTICAL DETECTOR, AAI P/N 62828-90111-1 BELFORT P/N 32310, ASN: S100-2MT5A2A4.
CAR 1352.209-74.docx Same revision and size as this file Revision not stated NEW PURCHASE; ASOS WIRE KITS S100-45017
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair and Calibration of the following equipment: T342, T334 and T229A
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Painting services of the following equipment: SENSOR, FREEZING RAIN, ASN: S100-2MT3-1
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair, Refurbishment, Programming and Operational Verification Testing services for the following: MODEL AX300/M7, ASN: S100-11DS22-1 and Model AX3000/M75C, ASN: S100-41DS28-2
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Purchas of Boxes for Logistics
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair and Reconditioning services for the following equipment: THERMOMETER, W/ SHELTER ASSEMBLY, ASN: C450-2
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair of the following equipment: PHASE SPLITTER/AMPLIFIER, RDL PN: 111342, MATRIX TEST EQUIPMENT PN: AS-1900, ASN: R400-4A1A2A9, NSN: 5915-01-421-4352
CAR 1352.209-74.docx Same revision and size as this file Revision not stated New Purchase: 9 each Power Supply with Fan ASN; R400-2A9PS1 NSN; 6130-01-592-8153
CAR 1352.209-74.docx Same revision and size as this file Revision not stated New Purchase: 50 each Line Detector, ASN: R400-4A1A1A11, NSN: NWS0-02-080-0002, RDL P/N: VMN2080
CAR 1352.209-74.docx Same revision and size as this file Revision not stated New Purchase: 100 each Quick Adjusting Lanyard, ASN: R400-2MP516, NSN: 4010-01-607-2736
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair and Reconditioning services, HYDROLOGGER, MODEL 550A/B, ASN: D925
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair and Reconditioning services for the following: THERMOMETER, W/ SHELTER ASSEMBLY, ASN: C450-2
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair and Recondition the following equipment: 65 each OPTICAL DETECTOR, AAI P/N 62828-90111-1 BELFORT P/N 32310, ASN: S100-2MT5A2A4.
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair and Recondition the following equipment: 50 each OPTICAL TRANSMITTER BELFORT P/N 32315 AAI P\N 62826-90111-3, ASN: S100-2MT5A2A3.
CAR 1352.209-74.docx Same revision and size as this file Revision not stated Repair and Recondition the following equipment: 40 each PULSE SHAPER MODULE P/N 1A20768A01, ASN: R400-3A5
Show all 20

Who attaches CAR 1352.209-74

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

1352.209-74 Organizational conflict of interest.

(a) Purpose. The purpose of this clause is to ensure that the contractor and its subcontractors:

(1) Are not biased because of their financial, contractual, organizational, or other interests which relate to the work under this contract, and

(2) Do not obtain any unfair competitive advantage over other parties by virtue of their performance of this contract.

(b) Scope. The restrictions described herein shall apply to performance or participation by the contractor, its parents, affiliates, divisions and subsidiaries, and successors in interest (hereinafter collectively referred to as “contractor”) in the activities covered by this clause as a prime contractor, subcontractor, co-sponsor, joint venturer, consultant, or in any similar capacity. For the purpose of this clause, affiliation occurs when a business concern is controlled by or has the power to control another or when a third party has the power to control both.

(c) Warrant and Disclosure. The warrant and disclosure requirements of this paragraph apply with full force to both the contractor and all subcontractors. The contractor warrants that, to the best of the contractor's knowledge and belief, there are no relevant facts or circumstances which would give rise to an organizational conflict of interest, as defined in FAR Subpart 9.5, and that the contractor has disclosed all relevant information regarding any actual or potential conflict. The contractor agrees it shall make an immediate and full disclosure, in writing, to the Contracting Officer of any potential or actual organizational conflict of interest or the existence of any facts that may cause a reasonably prudent person to question the contractor's impartiality because of the appearance or existence of bias or an unfair competitive advantage. Such disclosure shall include a description of the actions the contractor has taken or proposes to take in order to avoid, neutralize, or mitigate any resulting conflict of interest.

(d) Remedies. The Contracting Officer may terminate this contract for convenience, in whole or in part, if the Contracting Officer deems such termination necessary to avoid, neutralize or mitigate an actual or apparent organizational conflict of interest. If the contractor fails to disclose facts pertaining to the existence of a potential or actual organizational conflict of interest or misrepresents relevant information to the Contracting Officer, the Government may terminate the contract for default, suspend or debar the contractor from Government contracting, or pursue such other remedies as may be permitted by law or this contract.

(e) Subcontracts. The contractor shall include a clause substantially similar to this clause, including paragraphs (f) and (g), in any subcontract or consultant agreement at any tier expected to exceed the simplified acquisition threshold. The terms “contract,” “contractor,” and “Contracting Officer” shall be appropriately modified to preserve the Government's rights.

(f) Prime Contractor Responsibilities. The contractor shall obtain from its subcontractors or consultants the disclosure required in FAR Part 9.507–1, and shall determine in writing whether the interests disclosed present an actual, or significant potential for, an organizational conflict of interest. The contractor shall identify and avoid, neutralize, or mitigate any subcontractor organizational conflict prior to award of the contract to the satisfaction of the Contracting Officer. If the subcontractor's organizational conflict cannot be avoided, neutralized, or mitigated, the contractor must obtain the written approval of the Contracting Officer prior to entering into the subcontract. If the contractor becomes aware of a subcontractor's potential or actual organizational conflict of interest after contract award, the contractor agrees that the Contractor may be required to eliminate the subcontractor from its team, at the contractor's own risk.

(g) Waiver. The parties recognize that this clause has potential effects which will survive the performance of this contract and that it is impossible to foresee each circumstance to which it might be applied in the future. Accordingly, the contractor may at any time seek a waiver from the Head of the Contracting Activity by submitting such waiver request to the Contracting Officer, including a full written description of the requested waiver and the reasons in support thereof.

(End of clause)

File details come from the government source that posted it. Updated .