CA-MB-LF-22-RFP_Addendum 2_08-10-2022.docx
DOCX document 24 KB Posted
- Attached to
- STANDARD CUTAWAY CHASSIS TYPE TRANSIT VEHICLES
- Solicitation number
- RFP-01659
- Issued by
- Hillsborough County, Florida
About this file
This document is an Addendum to a Request for Proposal (RFP) issued by the University of South Florida, Center for Urban Transportation Research, representing the Florida Department of Transportation, for the TRIPS-22-CA-MB-LF CONTRACT for the manufacture and delivery of Standard Cutaway, Minibus, and Low Floor Cutaway Chassis Type Transit Vehicles. The original proposal due date of August 19, 2022 has been extended to September 2, 2022. The vehicles shall fulfill all requirements defined in the RFP's Technical Specifications, Quality Assurance Provisions, and Warranty Provisions. The quantities reflect the immediate and foreseeable needs of transit agencies within Florida, with a minimum of 0 and a maximum of 750 vehicles that may be assigned to other public transit agencies.
The RFP requires compliance with Equal Opportunity Laws and Regulations, Buy America Laws, Chapter 287 of the Florida Statutes, and all other applicable Federal and State regulations. Pricing terms, set asides, incumbents, funding requirements and sources, and other salient information were not provided in this Addendum.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Pre-proposal Questions and Addendums.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
#TRIPS-22-CA-MB-LF RFP
CUTAWAY, MINIBUS AND LOW FLOOR TYPE TRANSIT VEHICLES
Addendum 2 August 10, 2022
| Where? |
| Page # |
| Section |
| Change |
| Part 1 |
| 2 |
| Exhibit 2 |
| Replace 1.2.0 Proposal Requirements |
Proposals will be received until 3:30 PM EST, Friday, August 19,2022 Any proposal received after that time will not be considered and will be returned to the proposer unopened. All labor, equipment, and materials shall be furnished in strict accordance with the conditions of the Purchasing Agreement documents. The vehicles shall fulfill all of the requirements defined in Part 2: Technical Specifications, including addenda thereto. Compliance with these requirements shall be in accordance with the procedures defined in Part 4: Quality Assurance Provisions. The Contractor herein referred to as “dealer” as well, shall accept the warranty provisions covering the vehicles as defined in Part 5: Warranty Provisions.
With: 1.2.0 Proposal Requirements
Proposals will be received until 3:30 PM EST, Friday, September 2,2022 Any proposal received after that time will not be considered and will be returned to the proposer unopened. All labor, equipment, and materials shall be furnished in strict accordance with the conditions of the Purchasing Agreement documents. The vehicles shall fulfill all of the requirements defined in Part 2: Technical Specifications, including addenda thereto. Compliance with these requirements shall be in accordance with the procedures defined in Part 4: Quality Assurance Provisions. The Contractor herein referred to as “dealer” as well, shall accept the warranty provisions covering the vehicles as defined in Part 5: Warranty Provisions.
File details come from the government source that posted it. Updated .