C5_5__Attachment_1_Drawing_No__122665-10-H__Rev__A.pdf

CUSTOMER P.O. _____________

started. Any change is subject to PRICE

AVOID DELAY - To establish SHIPPING PROMISE, and SHIPPING PROMISE adjustment.

FOR RECORD

CUSTOMER: _____________________

TATE ORDER NO. ________

SERIAL NO. ______ ITEM # __

This print is for record purpose only as it

BY: DATE:

one approved print must be returned by:

CERTIFIED FOR CONSTRUCTION

FOR APPROVAL

covers equipment on which manufacture has been

16 CL STRAINER

INLETOUTLET

16 135

2 PLCS

2 PLCS

2 PLCS

1.00 THRU

4 MOUNTING HOLES

1/16

BOTH FLANGES

BOTH FLANGES

2-14 NPT

8 THRU

EQ SP16 PLCS

4 B.C.

40.00 APPROX

CLEARANCE

REQ TO REMOVE

BASKET

AA

SEE NOTE 8

A A

IN-PROCESS

INSPECTION

GENERAL NOTES:

1. DESIGN PRESSURE 300 PSI

2. DESIGN TEMP. 150 F

3. CAST FLANGES DRILLED TO ASME B16.42 RF 300LB. BOLT HOLES STRADDLE CENTER LINES.

4. ALL DIMENSIONS IN INCHES AND SUBJECT TO MANUFACTURING TOLERANCES.

5. RUBBER VALVE DISC RINGS.

6. BYPASS: THE BASKET DESIGN INCORPORATES CLEARANCE BETWEEN THE BODY HOUSING, PARTICLES

UP TO .050" MAY BYPASS THE BASKET.

7. BODY MADE OF ASTM A395 WITH 316SS BASKET CONSTRUCTION.

8. NEAR BASKET IN SERVICE WHEN VALVE SCREW IS UNCOVERED. FAR BASKET IN SERVICE WHEN

VALVE SCREW IS COVERED.

9. STRAINER SHOULD BE BOTTOM-SUPPORTED BY THE FEET ON BOTH SIDES OF THE UNIT.

10. OPEN EQUALIZING LINE TO EASE THE SLIDING GATE VALVE MOVEMENT WHEN SWITCHING BASKET CHAMBERS. CLOSE EQUALIZING LINE AFTER CHANGE TO ISOLATE CHAMBERS. THE THIRD VALVE

ALLOWS FOR USE AS A BLOW-DOWN.

SEE PG 2

FOR

SECTION

REVISIONS

ZONE REV. DESCRIPTION REVISED BY APPROVED DATE

C4, C5, 2-B4, 2-D4, 2-E4 A UPDATE EQUAL/ DRAIN ASSY, 2011

16 WAS 201

64; 269

16 WAS 261

16; 140133-7-1 WAS 140133-7; P10H178 WAS

P10H176 RIH DFH 7/15/20

CAGE NO.

THIS DRAWING IS THE PROPERTY

OF TATE ANDALE.

ALL USE IS FORBIDDEN

EXCEPT BY WRITTEN CONSENT

DO NOT SCALE DRAWING

DRAWN:

CHECKED:

DATE

APPROVED:

APPROVALS

DWG.NO.

09032

SIZE

SHEET:

REV.3/26/20

3/31/20

EST. WEIGHT :

LBS.

A

1 OF 22083.54MATERIAL:3/31/20

RIH

GKE

DFH

D 122665-10-H

1941 LANSDOWNE ROAD, BALTIMORE,MD 21227

Tate Andale

CHN DRIVE, EQL. LINES (SS)

DP GAUGE (SS), EPOXY COATED

10" AH, DUCTILE IRON

MADE FROM-SEE BOMREF DWG-122665/ 122554CAD MODEL-122665-10-H

ALL DIMENSIONS

REFERENCE UNLESS

OTHERWISE SPECIFIED.

A A

B B

C C

D D

E E

F F dhuysamen Callout

ADD A NOTE THAT THIS IS A LH UNIT. ADD BOM NUMBER TO NOTES

dhuysamen Callout

ADD NOTE THAT IT IS A LH UNIT.

CUSTOMER P.O. _____________

started. Any change is subject to PRICE

AVOID DELAY - To establish SHIPPING PROMISE, and SHIPPING PROMISE adjustment.

FOR RECORD

CUSTOMER: _____________________

TATE ORDER NO. ________

SERIAL NO. ______ ITEM # __

This print is for record purpose only as it

BY: DATE:

one approved print must be returned by:

CERTIFIED FOR CONSTRUCTION

FOR APPROVAL

covers equipment on which manufacture has been

12*19 25

*20

*2335 914 261

*21

181739

SECTION A-A

INLET SIDE

*2236

*6

13*239 83

*21

15 5 7

A

A

A

ITEM

NO. QTY DRAWING

NUMBER DESCRIPTION MATERIAL

41 1 EQL1105100-SS EQUAL/ DRAIN ASSY ASSY. (STAINLESS)

40 1 CHD1105100 CHAIN DRIVE ASSY ASSY. (STEEL)

39 1 DP1105100-SS GAUGE, DP ASSY ASSY. (STAINLESS/ BRASS)

38 2 P10R259 SCREW, CAP, REG. HEX, 5/8''-11X2.00'' ASTM A193 B8M

37 2 P10R256 SCREW, CAP, REG. HEX, 5/8''-11X1-1/4'' ASTM A193 B8M

36 4 P23T226 SCREW, SCKT CAP, 5/8-11 X 1.00" ASTM SA193 B8M

35 10 P25E24 WASHER, 3/4 '', PLAIN TY. A (WIDE) AISI 316

34 12 P13S17 NUT, JAM, HVY. HEX, 3/4''-10 ASTM SA194 8M

33 4 1-240 VALVE. PETCOCK, BRASS 3/8" NPT BRASS

32 2 P22C20 SCREW, DRIVE #4 X .25" RD HD AISI 316

31 2 641388-201 KEY AISI 1018

30 28 P10H178 SCREW, CAP, HVY. HEX, 1/2''-13X1-3/4'' ASME SA193 B8M

29 4 P10H301 SCREW, CAP, HVY. HEX, 3/4''-10 X 2-1/2'' ASME SA193 B8M

28 16 P50Q722 STUD, 1.00''-8 X 4-1/2'' ASME SA193 B8M

27 50 P50Q520 STUD, 3/4''-10 X 4.00'' ASME SA193 B8M

26 4 P50Q552 STUD, 3/4''-10 X 12 .00 '' ASTM SA193 B8M

25 16 P11H19 NUT, HVY. HEX, 1.00''-8 ASME SA194 8M

24 50 P11H17 NUT, HVY. HEX, 3/4''-10 ASME SA194 8M

*23 65 IN 1-630 PACKING, 3/8 SQ GRAPHITE/ PTFE

*22 2 140089-3 GASKET, GUIDE ASTM F104 P7141A

*21 2 140225-1 GASKET, COVER ASTM F104 P7141A

*20 2 140226-1 GASKET, PLATE COVER ASTM F104 P7141A

*19 2 433764-40 GASKET, DOOR ASTM F104 P7141A

18 1 111-1 BASKET IN SERVICE PLATE ALUMINUM

17 1 109-1 IDENT PLATE ALUMINUM

16 1 110-1 IDENT PLATE (INLET) ALUMINUM

15 2 142252-4A VALVE SCREW ASSY STEEL

14 2 140222-1 BEARING, 8"-10" AL/AH ASTM A48 CL30

13 4 140163-1 WEDGE SHOE, 8"-16" AL AISI 316

12 2 130766-5 ASSEMBLY, DOOR STEEL (COATED)

11 2 P38A100 HANDLE STEEL

10 2 140166-2 HANDWHEEL, 8-10" AL/AH ASTM A48 CL30

9 2 140144-1S-015 GLAND, 8-10" AL/AH ASTM A395 F32800 60-40-18 (COATED)

8 2 140159-1S-015 WEDGE 8"-10" AL/AH ASTM A48 CL30 (COATED)

7 2 132187BS-015 GUIDE BASE ASSY (COATED) CAST STEEL/ STEEL (COATED)

*6 2 140110-4 RING DISC ISOPRENE DURO 90

5 2 130120-35 ASSEMBLY, SHAFT, 10" AL/AH BRASS

4 2 140133-7-1 PLATE, COVER ASME SA 240 S31600

3 2 140154-1S-015 DISC, 10" AL/AH ASTM A395 F32800 60-40-18 (COATED)

2 2 120134-1 COVER, 10" AH ASTM A395 F32800 60-40-18 (COATED)

1 1 110112-1 BODY 10" AL/AH (COATED) ASTM A395 F32800 60-40-18 (COATED)

REVISIONS

ZONE REV. DESCRIPTION REVISED BY APPROVED DATE

- - See Sheet1 - - -

CAGE NO.

THIS DRAWING IS THE PROPERTY

OF TATE ANDALE.

ALL USE IS FORBIDDEN

EXCEPT BY WRITTEN CONSENT

DO NOT SCALE DRAWING

DRAWN:

CHECKED:

DATE

APPROVED:

APPROVALS

DWG.NO.

09032

SIZE

SHEET:

REV.3/26/20

3/31/20

EST. WEIGHT :

LBS.

A

2 OF 22083.54MATERIAL:3/31/20

RIH

GKE

DFH

D 122665-10-H

1941 LANSDOWNE ROAD, BALTIMORE,MD 21227

Tate Andale

CHN DRIVE, EQL. LINES (SS)

DP GAUGE (SS), EPOXY COATED

10" AH, DUCTILE IRON

MADE FROM-SEE BOMREF DWG-122665/ 122554CAD MODEL-122665-10-H

ALL DIMENSIONS

REFERENCE UNLESS

OTHERWISE SPECIFIED.

A A

B B

C C

D D

E E

F F