C4b_Attachment B Statement of Work.pdf

PDF 281 KB Posted

Attached to
Rotary angle broom with hydraulic control
Solicitation number
12444626Q0044
Issued by

About this file

This is a Statement of Work (SOW) for the purchase of equipment by the U.S. Forest Service. The Eleven Point Ranger District of the Mark Twain National Forest in Doniphan, Missouri is requesting the purchase of one 84-inch skid steer rotary broom. The contractor must furnish equipment meeting detailed specifications, including a broom hood constructed of 10-gauge steel, a half-inch steel frame, and either a guarded or inset hydraulic motor. The rotary broom head must measure a minimum of 26 inches and be constructed of poly-steel material.

Additional required specifications include greaseable bushings with inset zerks, 1.5-inch thick storage stands inset 64 inches or less (32 inches either side of center), a direct drive motor with built-in pressure relief, quick exchange bristle wafers, minimum 140 degrees of coverage from the broom guard, and hydraulic angle operation with wiring harness if applicable. The document does not include response deadlines, pricing information, award dates, or other contractual terms beyond these technical specifications.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Purchase of 84” Rotary Broom

REQUESTING UNIT: Eleven Point Ranger District Mark Twain National Forest 66 Confederate Ridge Rd.

Doniphan, MO 63935

1. INTRODUCTION – The U.S. Forest Service (FS) requires the purchase of (1) 84” skid steer rotary broom for the Eleven Point District of the Mark Twain National Forest.

2. SCOPE – The U.S. Forest Service (FS) requires the contractor to furnish a rotary with the following specifications:

• Broom hood constructed of 10-gauge steel

• ½ in steel frame

• Guarded or inset hydraulic motor

• Minimum of 26 in rotary broom head; poly-steel broom head

• Greaseable bushings with inset zerks

• 1 ½ in thick storage stands

• Storage stands inset 64 in or less (32 in either side of center)

• Direct drive motor with built in pressure relief

• Quick exchange bristle wafers

• Minimum of 140 degrees of coverage from broom guard

• Hydraulic angle operation with wiring harness if applicable

3. POINTS OF CONTACT -

File details come from the government source that posted it. Updated .