C2 26Q4013_ODS_Hose Assy.pdf

This is an Ordering Data Sheet – General for the procurement of a hose assembly. The government requires six (6) units of a 1-1/2-inch inner diameter hose assembly with specific technical specifications and materials. The hose must feature a smooth white rubber outer cover with a Teflon bore, rated for a minimum pressure of 150 PSI and minimum temperature of 220°F. The assembly must be constructed from Saint-Gobain Chemfluor Hose (WTLCT) with 300 series stainless steel female cam and groove swivel couplers installed on both ends, equipped with EPDM gaskets. The specified manufacturer/vendor part number is SAINT GOBAIN P/N: 24 WTLCT 16 16 S 6 - 36', with each hose measuring 36 feet in length (measured between gasket sealing surfaces) and subject to a length tolerance of ±1% of hose length.

The ordering document establishes mandatory compliance requirements, including hydrostatic testing of the hose assembly in accordance with specifications in the Statement of Work and submission of a Certificate of Compliance. The material must be marked with the date of manufacture, and a minimum of 85% shelf-life must remain from the manufacturing date upon receipt. The Saint-Gobain part number has been determined technically acceptable for government use. No changes to specifications or other technical requirements are permitted without approval from the Shipyard's Administrative Contracting Officer (ACO). This ordering data sheet is associated with Job Order 88MSMSHP91, Key Operation S01, and item number 075, with identification number 5344-7990, Revision 3.