C08.0 Combined Synopsis-Solicitation N4523A21Q1324.pdf

SEE ADDENDUM

(No Collect Calls)

N4523A21Q1324 27-Apr-2021

b. TELEPHONE NUMBER

360-627-4361

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 29 Apr 2021

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

N4523A9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

NATHAN C GRIMM

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

SEE SCHEDULE

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

N4523A PSNS&IMF

C440

COMMAND SERVICES CONTRACTING SUPPORT

1400 FARRAGUT AVE

BREMERTON WA 98314-2026

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE N68438 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

TRIDENT REFIT FACILITY

ATTN: SHOP 67R SUPERVISOR, PH: (360) 315-11

7000 FINBACK CIRCLE BLDG 7000 DOOR 12 RECEIVI

SILVERDALE WA 98315-7000

TEL: (360) 315-1193 FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$8,000,000

NAICS:

811310

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

N4523A21Q1324

Section SF 1449 - CONTINUATION SHEET

STATEMENT OF WORK

SERVICE CONTRACT

STATEMENT OF WORK (SOW)

WORKSHEET

REV - DTD 4/27/2021

CHECK ALL BELOW THAT APPLY:

HIGH RISK JUSTIFICATION: Service supports the restoration of two SSN774 Class variants of the

AN/BPS-16 Radar Mast Sub-Assembly that directly affects the successful completion of the SSN 782 availability at Pearl Harbor Naval Shipyard and the SSN 775 availability at Portsmouth Naval Shipyard.

Additionally, the service supports the restoration of two SSBN 726 Class variants of the AN/BPS-16 Radar Mast Sub-Assembly to enable a ready issue spare assets for the naval supply system of which currently zero ready issue spare assets are available. Delays to timely procurement and accomplishment of the service directly affect availability schedules and potential to delay the underway of submarine units.

SUBSAFE

DSS/SOC

LOCATION OF WORK IS WITHIN AN AREA THAT REQUIRES NAVSEA REVIEW

JML #: N/A - LDS System @ TRF-B DD2276 #: (Request for Contractual Procurement (RCP) required for services over $2500 or services with terms and conditions.) – Received from Funds Administrator Ship/Activity: TRF BANGOR RADAR DEPOT Title: AN/BPS-16 RADAR MAST THERMAL SPRAY RESTORATION SERVICES Place of Performance: Vendor Facility - CONUS Period of Performance: From 3 MAY 2021 to 1 NOV 2021

1. BACKGROUND

1.1 The Trident Refit Facility Bangor (TRF-B) Radar Depot performs restoration of SSN774 Class, SSN 21 Class, and SSBN 726 Class variants of the AN/BPS-16 radar mast sub-assembly for the US Navy. Each radar mast sub-assembly is comprised of three mast tubes: one (1EA) Outer Hosing, one (1EA) Radar Mast, and one (1EA) Rotary Tube. The mast tubes must maintain their SUBSAFE/Level 1 certifications such that TRF-B, the “SUBSAFE Certifying Activity”, will oversight the repair process required by contract for SUBSAFE/Level 1 work performed by contractors not previously certified to perform SUBSAFE work by NAVSEA. During restoration of radar mast sub-assemblies, the outer surfaces of each mast tube requires surface finish restoration using NAVSEA certified thermal spray deposition processes.

Reference 2.1, Enclosure (2), paragraph 1 specifies refurbishment of the outer surfaces of the three individual mast tubes of the AN/BPS-16 mast sub-assembly using thermal spray processes identified in Reference 2.2.

1.2 Four separate AN/BPS-16 mast sub-assemblies, for a total of twelve (12EA) radar mast tubes require refurbishment by thermal spray. Each mast sub-assembly and its three associated mast tubes are listed in paragraph 11.2.3 in order of priority, critical needs listed first.

2. REFERENCES

2.1 TRF Bangor Engineering Memorandum 410/017M-19 Rev-G, SUBSAFE; Flame Spray BPS-16 Mast Components by Non-SUBSAFE Qualified Contractor

2.2 NAVSEA T9074-AA-GIB-010/1687 dtd 12 JUN 2017; Thermal Spray Process for Naval Ship Machinery and Non-Skid Applications

2.3 MIL-STD-1687A; Thermal Spray Processes for Naval Ship Machinery Applications, includes Notice 2 dtd 12 JUN 2017; Notice of Cancellation

2.4 NAVSEA T9074-AS-GIB-010/271 Rev-1 dtd 11 SEP 2014; Requirements for Non-Destructive Test Methods

2.5 ASNT SNT-TC-1A 2020 Edition, Personnel Qualification and Certification in Nondestructive Testing

3. WORK REQUIREMENTS

3.1 Contractor Work Requirements:

3.1.1 For consideration under this contract, the contractor’s thermal spray facility, quality assurance program, and the thermal spray procedures used in support of these services shall be previously NAVSEA certified IAW paragraphs 5.1 and 5.2 of Reference 2.2 and documented proof thereof shall be provided at solicitation with their proposal for technical review and consideration.

3.1.1.1 Reference 2.3 is the previous approved military specification for thermal spray processes for naval ship machinery applications, which was superseded by Reference 2.2 as detailed in “Notice 2” of Reference

2.3. Contractors who were previously NAVSEA certified to perform machinery restorative thermal spray processes, along with any previously approved machinery restorative thermal spray procedures under Reference 2.3 are satisfactory for performance and contract award per NAVSEA representatives via email communication.

3.1.2 The contractor shall not use any sub-contractor to perform any work associated with this service, the only exception permitted is the use of a sub-contractor to perform nondestructive liquid dye penetrant testing (PT). When subcontracting the nondestructive testing PT, all work shall be conducted at the facility of, and under direct supervision of, the primary contractor. All handling of the components (e.g., lifting, positioning, and/or transporting) shall be performed by the primary contractor.

3.1.3 For consideration under this contract, the contractor, or sub-contractor if used, must meet all NAVSEA requirements for nondestructive liquid dye penetrant testing (NDT PT), to include Reference 2.4 and Reference 2.5. Prior to consideration for award, the contractor, or sub-contractor if used, will be evaluated by the NAVSEA activity, TRF-B, to the requirements of Reference 2.4 and Reference 2.5.

For this service the TRF-B nondestructive testing division (code 630) NDT Level III Examiner will perform the review.

3.1.3.1 The contractor, or sub-contractor if used, shall provide the following documentation at solicitation with their proposal for technical review and consideration:

a. Contractor’s/Sub-Contractor’s Written Practice.

b. NDT LP procedure meeting requirements of Reference 2.4 Chapter 5.

c. NDT Personnel Certification Records meeting requirements of Reference 2.4 paragraphs 1.6, 1.6.2.1, 1.6.4 and 1.6.8, as well as Reference 2.5 paragraph 9.4.

d. Summary of the Contractor’s/Sub-Contractor’s NDT surveillance program.

e. Any other documentation regarding the NDT program when requested.

3.1.4 Upon award of contract and prior to commencement of work on SUBSAFE AN/BPS-16 radar mast tubes, the contractor shall permit the “qualified SUBSAFE activity” representatives, TRF-B, access to their work site(s) to verify compliance with SUBSAFE requirements through an initial and follow-on periodic site visits IAW Reference 2.1 Enclosure (1) paragraphs 3 through 3.f.

3.1.4.1 When TRF-B has conducted a site visit of the contractor’s facility for similar SUBSAFE maintenance within the past 24 months from the contract award, only follow-on site visits are required prior to the conclusion of the 24 months periodicity requirement IAW Reference 2.1 Enclosure (1) paragraph 3.a.

3.1.5 Upon award of contract and prior to commencement of any work on SUBSAFE AN/BPS-16 radar mast tubes, the contractor shall enter into a Memorandum of Agreement (MOA) with TRF-B to assign responsibilities and actions required by both parties for the conduct of SUBSAFE work under the oversight of TRF-B IAW Reference 2.1 Enclosure (1) paragraph 2. The MOA will not modify or change any requirement imposed herein by the Statement of Work or the awarded contract.

3.1.6 As determined by the TRF-B nondestructive testing division (code 630) NDT Level III Examiner, conduct of an initial and potential follow-on site visits may be required to verify compliance with the requirements of Reference 2.4 and Reference 2.5. The contractor shall permit TRF-B nondestructive testing division (code 630) personnel, access to their work site(s) to observe the performance of the NDT PT to verify NDT PT written practice and NDT PT surveillances comply with Reference 2.4 and Reference 2.5 requirements.

3.1.6.1 The initial and potential follow-on periodic site visits for NDT PT performance review may not impede or otherwise delay the contractor, or subcontractor, such to prevent meeting delivery milestone dates or otherwise extend the period of performance of the contract.

3.1.7 Reference 2.2 paragraph 3.1.3 requires written records for AN/BPS-16 radar mast tubes in the accomplishment of thermal spray repairs, which are satisfied by Reference 2.1 Enclosure (5); Thermal Spray Job Control Record (TSJCR). The contractor shall provide a completed TSJCR as CDRL item A001 for each mast tube. If the TSJCR is lost or illegible upon receipt, contact the TRF-B COR and planning points-of-contact listed for a replacement.

3.1.7.1 Reference 2.1 Enclosure (5) provides a “blank” sample of the TSJCR, and includes instructions on the use of, and completion of, the TSJCR form. Data required to be entered on the TSJCR by the contractor are identified by “(Spray Activity)” and “(Spray Activity) Quality Assurance (QA)”.

3.1.7.2 The Contractor shall generate and assign a unique thermal spray serial number for each AN/BPS-16 radar mast tube IAW Reference 2.1 Enclosure (5). The contractor shall communicate the unique thermal spray serial numbers to the TRF-B COR and planning points-of-contact listed no later than 3 workdays following contract award such to provide time for the application of the thermal spray serial number markings by TRF-B prior to shipping AN/BPS-16 radar mast tubes to the contractor.

3.1.8 The contractor shall use and complete the Objective Quality Evidence (OQE) records, Reference 2.1 applicable Enclosure (6), (7), or (8), during the refurbishment of the AN/BPS-16 radar mast tubes IAW Reference 2.1 paragraph 2. The contractor shall provide the completed OQE Record, Reference 2.1 applicable Enclosures (6), (7), or (8), as CDRL item A002 for each mast tube. If an OQE record is lost or illegible upon receipt, contact the TRF-B COR and planning points-of-contact listed for a replacement.

3.1.9 The contractor shall conduct an inspection upon receipt of AN/BPS-16 radar mast tubes prior to commencement of work. The inspection shall confirm receipt of the AN/BPS-16 radar mast tubes with the supplied documentation package. The AN/BPS-16 radar mast tube documentation package is comprised of the following:

3.1.9.1 Material Identification (ID) / Control Tag, QA Form 2 – The contractor shall validate the inscribed markings on the AN/BPS-16 radar mast tube correlate to the recorded data in the “MIC NO/SERIAL NO” field of the QA Form 2 attached to the AN/BPS-16 radar mast tube. If a QA Form 2 is lost or illegible upon receipt of an AN/BPS-16 radar mast tube, notification, within 24 hours, by telephone and email message to the TRF-B COR and planning points-of-contact listed is required.

3.1.9.1.1 The QA Form 2 shall remain legible and remain physically attached to the AN/BPS-16 radar mast tube at all times during repair and refurbishment processes and upon completion of refurbishment the QA Form 2 shall be returned to TRF-B physically attached to the AN/BPS-16 radar mast tube.

3.1.9.1.2 The contractor shall only remove the QA Form 2 temporarily when it is required to preclude damage during refurbishment processes. When the QA Form 2 requires removal prior to a potentially damaging operation, the QA Form 2 shall be stored in the vicinity of the AN/BPS-16 radar mast tube such that it cannot be misplaced or damaged, and without delay reattached to the AN/BPS-16 radar mast tube upon the immediate cessation of each potentially damaging process.

The contractor shall not make any entry on the QA Form 2; its purpose is for traceability and material control requirements by TRF-B instructions.

3.1.9.2 Maintenance Certification Record/Re-Entry Control, QA Form 9/QA Form 10 (REC) - The contractor shall validate the “CWP/REC SERIAL NO” recorded in data field “4.” of the REC correlates to the recorded data in the “CWP SER. NO.” field of the QA Form 2 attached to the AN/BPS-16 radar mast tube(s).

3.1.9.2.1 The REC shall remain legible, and accompany the AN/BPS-16 radar mast tube(s) at all times during repair and refurbishment processes. The REC shall be returned to TRF-B with the AN/BPS-16 radar mast tube(s) upon completion of refurbishment. If a REC is lost or illegible upon receipt of AN/BPS-16 radar mast tube(s), notification, within 24 hours, by telephone and email message to the TRF-B COR and planning points-of-contact listed is required. The contractor shall not make any entry on the REC; its purpose is for SUBSAFE work authorization and control requirements by TRF-B instructions.

3.1.9.3 Thermal Spray Job Control Record (TSJCR) – The contractor shall validate the inscribed markings on the AN/BPS-16 radar mast tube correlate to the recorded data in the “MIC NO.” field in Section I of the TSJCR that accompanies the AN/BPS-16 radar mast tube.

3.1.9.4 Objective Quality Evidence (OQE) record – The contractor shall verify the OQE record, Reference 2.1 applicable Enclosures (6), (7), or (8), is enclosed with the AN/BPS-16 radar mast tube.

3.1.10 The contractor shall refurbish the outer surfaces of AN/BPS-16 radar mast tubes using thermal spray deposition processes and process controls IAW References 2.1 and Reference 2.2.

3.1.10.1 Pre-thermal spray machining of the AN/BPS-16 radar mast tubes shall be performed IAW paragraph 4.4.2 of Reference 2.2.

3.1.10.1.1 The AN/BPS-16 radar mast tube sketches, Enclosure (3) Sheets 1 through 3 of Reference 2.1, provide additional process limits and requirements in the “Repair Notes” and “Drawing Notes” blocks that shall be adhered to during pre-thermal spray machining processes.

3.1.10.1.2 The base material and yield strength properties of AN/BPS-16 radar mast tubes are provided in paragraph 5 of Enclosure (2) of Reference 2.1.

3.1.10.2 Nondestructive testing PT meeting the requirements of Reference 2.4 shall be conducted upon completion of pre-thermal spray machining operations.

3.1.10.3 Reference 2.1 Enclosure (2) paragraph 6.a requires solvent cleaning be performed IAW paragraph

4.4.1. of Reference 2.2.

3.1.10.4 Reference 2.1 Enclosure (2) paragraph 6.a requires abrasive blasting be performed IAW paragraph

4.4.2.5 of Reference 2.2.

3.1.10.5. Reference 2.1 Enclosure (2) paragraph 3 requires the type of thermal spray as plasma spray using a Monel (NiCu) bond coat and Alumina-Titania finish coat, or a Nickel-Aluminum-Molybdenum (NiAlMo) bond coat with Alumina-Titania finish coat.

3.1.10.5.1 Reference 2.1 Enclosure (2) paragraph 4 specifies the maximum thickness for the thermal spray

Monel (NiCu) or Nickel-Aluminum-Molybdenum (NiAlMo) bond coat and Alumina-Titania finish coat.

3.1.10.6 Reference 2.1 Enclosure (2) paragraph 6.b.(1) through 6.b.(3)(i) specifies the tolerance for outside diameter and surface finish of the thermal spray restoration of AN/BPS-16 radar mast tubes.

3.1.10.7 Reference 2.1 Enclosure (2) paragraph 7 requires inspection of thermal sprayed coatings IAW paragraph 3.5.2.1 of Reference 2.2.

3.1.11 During the TRF-B review of each AN/BPS-16 radar mast tube’s submitted documentation of

CDRL items A001 and A002, if TRF-B determines correction/changes are required to meet the requirements of Reference 2.1 for records retention, the contractor shall make corrections/changes within 3 workdays of notification by email message.

3.1.12 The contractor shall provide weekly progress reports, no later than close of business on every

Friday, to the TRF-B COR concerning the work in process at the contractor’s facility under this contract. The content of the report shall express completion percentages for each mast tube and completion projections for the following week.

3.1.12.1 The contractor shall identify any discrepancies discovered during receipt of, or work in process of, any AN/BPS-16 radar mast tube. Notification of the discrepancies shall be made to the TRF-B COR not later than 24 hours of discrepancy discovery, by telephone and email message.

3.2. Government (TRF-B) Work Requirements:

3.2.1 TRF-B nondestructive testing division (code 630) NDT Level III Examiner will evaluate the contractor’s, or sub-contractor’s if used, submitted records in accordance with paragraph 3.1.3 to ensure compliance with all NAVSEA requirements for nondestructive liquid dye penetrant testing (NDT PT), to include Reference 2.4 and Reference 2.5.

3.2.1.1 TRF-B nondestructive testing division (code 630) NDT Level III Examiner may determine the need to assess the conduct of the NDT PT by the contractor, or subcontractor, to verify their compliance with the requirements of Reference 2.4 and Reference 2.5. This assessment may be performed by an initial and potential follow-on, site visit(s) by TRF-B nondestructive testing division (code 630) personnel.

3.2.1.1 Site visits of the contractor’s facility for the initial assessment, and potential follow-on review, will be coordinated by the TRF-B COR and nondestructive testing points-of-contact with input from the contractor concerning the period of performance (dates and schedule) of the site visits.

3.2.1.2 The funding and the arrangement of travel of the TRF-B employees for the purpose of the site visit(s) will be the responsibility of TRF-B.

3.2.2 TRF-B engineering division (code 410) and SUBSAFE Program division (code 06) personnel will conduct the initial assessment, and any required forthwith every twenty-four months, to verify the contractor’s compliance with SUBSAFE requirements through an initial and follow-on periodic site visits IAW Reference 2.1 Enclosure (1) paragraphs 3 through 3.f.

3.2.2.1 Site visits of the contractor’s facility for the initial assessment, or twenty-four month follow-on review, will be coordinated by the TRF-B COR, engineering, and SUBSAFE Program points-of-contact with input from the contractor concerning the period of performance (dates and schedule) of the site visits.

3.2.2.2 The funding and the arrangement of travel of the TRF-B employees for the purpose of the site visit(s) will be the responsibility of TRF-B.

3.2.3 Upon award of contract TRF-B will enter into a Memorandum of Agreement (MOA) with the contractor to assign responsibilities and actions required by both parties for the conduct of SUBSAFE work under the oversight of TRF-B IAW Reference 2.1 Enclosure (1) paragraph 2.

3.2.4 For each AN/BPS-16 radar mast tube, TRF-B will provide the TSJCR form, Reference 2.1 Enclosure

(5), within the shipping crate, which is pre-filled by TRF-B IAW Reference 2.1 Enclosure (5).

3.2.4.1 TRF-B will apply the unique thermal spray serial number to each AN/BPS-16 radar mast tube IAW

Reference 2.1 Enclosure (1) paragraph 4.c. in the specified area IAW Reference 2.1 Enclosure (3).

3.2.5 TRF-B will provide the OQE Record, Reference 2.1 applicable Enclosures (6), (7), or (8), with each

AN/BPS-16 radar mast tube, within the shipping crate, for use during refurbishment.

3.2.6 TRF-B will provide the REC, within the shipping crate, prior to shipping AN/BPS-16 radar mast tubes to the contractor.

3.2.7 TRF-B will physically attach the Material Identification (ID) / Control Tag, QA Form 2, to each

AN/BPS-16 radar mast tube prior to shipping the mast tube to the contractor.

3.2.8 A review of each AN/BPS-16 radar mast tube’s submitted CDRL items A001 and A002 documentation will be performed by TRF-B engineering division (code 413) and TRF-B material certification branch (code 612) prior to acceptance and retention.

3.2.8.1 During review, if TRF-B determines changes are required to meet the record requirements of

Reference 2.1 notification to the contractor will be made via the COR within 5 workdays of receipt of each AN/BPS-16 radar mast tube’s CDRL item A001 and CDRL item A002.

3.2.9 TRF-B shall perform a technical receipt inspection of each restored AN/BPS-16 radar mast tube upon receipt from the contractor IAW Reference 2.1 Enclosure (1) paragraph 8 through 8.d.

3.2.9.1 The completion of inspections, review of documentation, and acceptability of the contractor’s services will be completed within 10 workdays from the date of receipt of restored AN/BPS-16 radar mast tubes.

4. CONTRACTOR FURNISHED ITEMS – PROPERTY, MATERIAL, EQUIPMENT,

SERVICES

4.1 The contractor shall furnish the following deliverable items:

4.2.1 Completed TSJCR, Reference 2.1 Enclosure (5), shall be provided for each AN/BPS-16 radar mast tube IAW CDRL item A001. In addition, the “wet ink” original document shall be returned to TRF-B within the shipping crate along with the AN/BPS-16 radar mast tubes.

4.2.2 Completed OQE record, Reference 2.1 applicable Enclosure (6), (7), or (8) shall be provided for each AN/BPS-16 radar mast tube IAW CDRL item A002. In addition, the “wet ink” original document shall be returned to TRF-B within the shipping crate along with the AN/BPS-16 radar mast tubes.

5.3 Manufacturer, model # and type include serial number(s):

5.3.1 AN/BPS-16 mast sub-assembly variant 1978837-4 from JCN 00104BPS60040 consisting of the following mast tubes:

1EA Outer Housing, CAGE 03956, PN 1980470, IT 9 of DWG 4800091/PL480091-4, Serial

Number: NCG-01142-006-QQ 1EA Rotary Tube, CAGE 03956, PN 1978730, IT 7 of DWG 4800091/PL4800091-4, Serial Number:

30265-002-1 1EA Inner Mast, CAGE 03956, PN 1978732, IT 8 of DWG 4800091/PL4800091-4, Serial Number:

KMD-01142-005-QQ

5.3.2 AN/BPS-16 mast sub-assembly variant 1978837-4 consisting of the following mast tubes:

1EA Outer Housing, JCN 00104BPS60031, CAGE 03956, PN 1980470, IT 9 of DWG 4800091/PL480091-4, Serial Number: NCGM-94024-712-QQ

1EA Rotary Tube, JCN 00104BPS60032, CAGE 03956, PN 1978730, IT 7 of DWG 4800091/PL4800091-4, Serial Number: 7017-006-8

1EA Inner Mast, JCN 00104BPS60033, CAGE 03956, PN 1978732, IT 8 of DWG 4800091/PL4800091-4, Serial Number: KMD-94308-711-QQ

5.3.3 AN/BPS-16 mast sub-assembly variant 1978837-2 from JCN 00104BPS60034 consisting of the following mast tubes:

1EA Outer Housing, CAGE 03956, PN 1980470, IT 23 of DWG 1978837/PL1978837-2, Serial

Number: NCG-94308-715-QQ 1EA Rotary Tube, CAGE 03956, PN 1978730, IT 21 of DWG 1978837/PL1978837-2, Serial

Number: 30186-006-5 1EA Inner Mast, CAGE 03956, PN 1978731, IT 22 of DWG 1978837/PL1978837-2, Serial Number:

KMD-9433-710-QQ

5.3.4 AN/BPS-16 mast sub-assembly variant 1978837-2 from JCN 00104BPS60035 consisting of the following mast tubes.

1EA Outer Housing, CAGE 03956, PN 1980470, IT 23 of DWG 1978837/PL1978837-2, Serial

Number: NCG-94221-712-QQ 1EA Rotary Tube, CAGE 03956, PN 1978730, IT 21 of DWG 1978837/PL1978837-2, Serial

Number: 1 (other marking of significance: M3700BG114) 1EA Inner Mast, CAGE 03956, PN 1978731, IT 22 of DWG 1978837/PL1978837-2, Serial Number:

KMD-94221-714-QQ

5.4 Government provided or contractor pickup: Government Provided

5. QUALITY ASSURANCE SURVEILLANCE PLAN

6.1 TRF-B COR will evaluate the contractor’s progress via the weekly progress reports in accordance with paragraph 3.1.12.

6.1.1 When the COR has concerns as to performance, delays, or discrepancies concerning the work in process at the contractor’s facility under this contract email communication to the contracting officer, contracting specialist, TRF-B Planning, and TRF-B Engineering points-of-contact listed in paragraph 9 will be made.

6.1.2 For this service, and during administration of this contract, technical matters outside the scope of the

COR’s area of responsibility, i.e., engineering requirements, non-destructive testing requirements, and/or SUBSAFE requirements, the COR shall be advised by the appropriate TRF-B points-of contact listed in paragraph 9.

6.2 The TRF-B technical receipt inspection conducted satisfactorily on each mast tube in accordance with paragraph 3.2.9, in addition to a satisfactory review of documentation of CDRL item A001 and CDRL item A002, associated with each mast tube, in accordance with paragraph 3.2.8 determine the acceptability of the contractor’s services.

6. SECURITY REQUIREMENTS N/A

7. TRAVEL REQUIREMENTS N/A

8. GOVERNMENT POINTS-OF-CONTACT

9. ENVIROMENTAL AND SAFETY N/A (Work is performed at the contractor’s facility)

10. ADDITIONAL CONSIDERATIONS

10.1 All technical clarifications/deviations will be coordinated through the Government Representative, COR.

10.2 Delivery and Shipping Requirements

10.2.1 Freight and shipping, by traceable means, of the set of three (3EA) AN/BPS-16 radar mast tubes for each incremental delivery from TRF-B to the contractor is the responsibility of, and funded by, TRF-B.

TRF-B will provide the shipment tracking identification data to the contractor within 24 hours of shipping carrier pick-up from TRF-B.

10.2.2 Freight and shipping, by traceable means, of the refurbished AN/BPS-16 radar mast tubes from the contractor to TRF-B is the responsibility of, and funded by, the contractor. The contractor shall provide the shipment tracking identification data to the TRF-B COR within 24 hours of shipping carrier pick-up from the contractor.

FOB Destination:

TRIDENT Refit Facility Bangor 7000 Finback Circle BLDG 7000 Door 12 Receiving Silverdale, WA 98315-7000 ATTN: Shop 67R Supervisor, PH: (360) 315-1193

10.2.2.1 To assist with determining return freight shipping costs the dimensions and maximum weight of the loaded shipping crate is provided below:

Shipping Crate Dimensions: 115”L x 33”W x 26”H Shipping Crate Weight: 1600 Lbs

10.2.3 TRF-Bangor requires prioritized incremental delivery to the vendor of one mast sub-assembly’s three mast tubes at any one time to limit the potential to comingle SUBSAFE/Level-1 material. Each set of three mast tubes shall be refurbished and returned to TRF Bangor prior to the following set of three mast tubes being shipped to the contractor from TRF Bangor, until such time that all three mast tubes associated with the four mast sub-assemblies listed below are refurbished.

10.2.3.1 The set of mast tubes listed below will be the first incremental delivery for services. AN/BPS-16 mast sub-assembly variant 1978837-4 from JCN 00104BPS60040 consisting of the following mast tubes to be refurbished via thermal spray application with services completed and assets shipped and received by TRF-B no later than (NLT) 35 calendar days from the date the mast tubes were received by the contractor:

1EA Outer Housing, CAGE 03956, PN 1980470, IT 9 of DWG 4800091/PL480091-4, Serial

Number: NCG-01142-006-QQ 1EA Rotary Tube, CAGE 03956, PN 1978730, IT 7 of DWG 4800091/PL4800091-4, Serial

Number: 30265-002-1 1EA Inner Mast, CAGE 03956, PN 1978732, IT 8 of DWG 4800091/PL4800091-4, Serial

Number: KMD-01142-005-QQ

10.2.3.2 Following receipt and acceptance per paragraph 6.2 by TRF-B, of the set of mast tubes from paragraph 10.2.3.1, the follow on set of mast tubes listed below will be the next incremental delivery for services. AN/BPS-16 mast sub-assembly variant 1978837-4 consisting of the following mast tubes to be shipped to the contractor to be refurbished via thermal spray application with services completed and assets shipped and received by TRF-B NLT 35 calendar days from the date the mast tubes were received by the contractor:

1EA Outer Housing, JCN 00104BPS60031, CAGE 03956, PN 1980470, IT 9 of DWG

4800091/PL480091-4, Serial Number: NCGM-94024-712-QQ 1EA Rotary Tube, JCN 00104BPS60032, CAGE 03956, PN 1978730, IT 7 of DWG

4800091/PL4800091-4, Serial Number: 7017-006-8 1EA Inner Mast, JCN 00104BPS60033, CAGE 03956, PN 1978732, IT 8 of DWG

4800091/PL4800091-4, Serial Number: KMD-94308-711-QQ

10.2.3.3 Following receipt and acceptance per paragraph 6.2 by TRF-B, of the set of mast tubes from paragraph 10.2.3.2, the follow on set of mast tubes listed below will be the next incremental delivery for services. AN/BPS-16 mast sub-assembly variant 1978837-2 from JCN 00104BPS60034 consisting of the following mast tubes to be shipped to the contractor to be refurbished via thermal spray application with services completed and assets shipped and received by TRF-B NLT 35 calendar days from the date the mast tubes were received by the contractor:

1EA Outer Housing, CAGE 03956, PN 1980470, IT 23 of DWG 1978837/PL1978837-2, Serial

Number: NCG-94308-715-QQ 1EA Rotary Tube, CAGE 03956, PN 1978730, IT 21 of DWG 1978837/PL1978837-2, Serial

Number: 30186-006-5 1EA Inner Mast, CAGE 03956, PN 1978731, IT 22 of DWG 1978837/PL1978837-2, Serial

Number: KMD-9433-710-QQ

10.2.3.4 Following receipt and acceptance per paragraph 6.2 by TRF-B, of the set of mast tubes from paragraph 10.2.3.3, the follow on set of mast tubes listed below will be the last incremental delivery for services. AN/BPS-16 mast sub-assembly variant 1978837-2 from JCN 00104BPS60035 consisting of the following mast tubes to be shipped to the contractor to be refurbished via thermal spray application with services completed and assets shipped and received by TRF-B NLT 35 calendar days from the date the mast tubes were received by the contractor:

1EA Outer Housing, CAGE 03956, PN 1980470, IT 23 of DWG 1978837/PL1978837-2, Serial

Number: NCG-94221-712-QQ 1EA Rotary Tube, CAGE 03956, PN 1978730, IT 21 of DWG 1978837/PL1978837-2, Serial

Number: 1 (other marking of significance: M3700BG114) 1EA Inner Mast, CAGE 03956, PN 1978731, IT 22 of DWG 1978837/PL1978837-2, Serial

Number: KMD-94221-714-QQ

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

CLIN

Number

1 Job

BPS-16 Thermal Spray Group 1

FFP

AN/BPS-16 mast sub-assembly variant 1978837-4 from JCN 00104BPS60040 consisting of the following mast tubes:

1EA Outer Housing, CAGE 03956, PN 1980470, IT 9 of DWG 4800091/PL480091-4, Serial Number: NCG-01142-006-QQ 1EA Rotary Tube, CAGE 03956, PN 1978730, IT 7 of DWG 4800091/PL4800091-4, Serial Number: 30265-002-1 1EA Inner Mast, CAGE 03956, PN 1978732, IT 8 of DWG 4800091/PL4800091- 4, Serial Number: KMD-01142-005-QQ FOB: Destination

MILSTRIP: N6843821RC043810

PURCHASE REQUEST NUMBER: N6843821RC043810

PSC CD: 2040

NET AMT

BPS-16 Thermal Spray Group 2

FFP

AN/BPS-16 mast sub-assembly variant 1978837-4 consisting of the following mast tubes:

1EA Outer Housing, JCN 00104BPS60031, CAGE 03956, PN 1980470, IT 9 of DWG 4800091/PL480091-4, Serial Number: NCGM-94024-712-QQ 1EA Rotary Tube, JCN 00104BPS60032, CAGE 03956, PN 1978730, IT 7 of DWG 4800091/PL4800091-4, Serial Number: 7017-006-8 1EA Inner Mast, JCN 00104BPS60033, CAGE 03956, PN 1978732, IT 8 of DWG 4800091/PL4800091-4, Serial Number: KMD-94308-711-QQ FOB: Destination

MILSTRIP: N6843821RC04481

PURCHASE REQUEST NUMBER: N6843821RC04481

BPS-16 Thermal Spray Group 3

FFP

AN/BPS-16 mast sub-assembly variant 1978837-2 from JCN 00104BPS60034 consisting of the following mast tubes:

1EA Outer Housing, CAGE 03956, PN 1980470, IT 23 of DWG 1978837/PL1978837-2, Serial Number: NCG-94308-715-QQ 1EA Rotary Tube, CAGE 03956, PN 1978730, IT 21 of DWG 1978837/PL1978837-2, Serial Number: 30186-006-5 1EA Inner Mast, CAGE 03956, PN 1978731, IT 22 of DWG 1978837/PL1978837- 2, Serial Number: KMD-9433-710-QQ FOB: Destination

MILSTRIP: N6843821RC04581

PURCHASE REQUEST NUMBER: N6843821RC04581

BPS-16 Thermal Spray Group 4

FFP

AN/BPS-16 mast sub-assembly variant 1978837-2 from JCN 00104BPS60035 consisting of the following mast tubes:

1EA Outer Housing, CAGE 03956, PN 1980470, IT 23 of DWG 1978837/PL1978837-2, Serial Number: NCG-94221-712-QQ 1EA Rotary Tube, CAGE 03956, PN 1978730, IT 21 of DWG 1978837/PL1978837-2, Serial Number: 1 (other marking of significance:

M3700BG114)

1EA Inner Mast, CAGE 03956, PN 1978731, IT 22 of DWG 1978837/PL1978837- 2, Serial Number: KMD-94221-714-QQ FOB: Destination

MILSTRIP: N6843821RC04681

PURCHASE REQUEST NUMBER: N6843821RC04681

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 03-MAY-2021 TO

04-JUN-2021

N/A TRIDENT REFIT FACILITY

ATTN: SHOP 67R SUPERVISOR, PH: (360)

315-11

7000 FINBACK CIRCLE BLDG 7000 DOOR

12 RECEIVI

SILVERDALE WA 98315-7000

(360) 315-1193 FOB: Destination

N68438

0002 POP 21-JUN-2021 TO

27-JUL-2021

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 09-AUG-2021 TO

10-SEP-2021

N/A (SAME AS PREVIOUS LOCATION)

0004 POP 27-SEP-2021 TO

29-OCT-2021

N/A (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.204-13 System for Award Management Maintenance OCT 2018 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.212-1 Instructions to Offerors--Commercial Items JUN 2020 52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.245-1 Government Property JAN 2017 52.245-9 Use And Charges APR 2012 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7005 Representation Relating to Compensation of Former DoD Officials

NOV 2011

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

DEC 2019

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2020 252.211-7003 Item Unique Identification and Valuation MAR 2016 252.211-7007 Reporting of Government-Furnished Property AUG 2012 252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010 252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.232-7011 Payments in Support of Emergencies and Contingency

Operations

MAY 2013

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel

JUN 2013

252.244-7000 Subcontracts for Commercial Items JAN 2021 252.245-7001 Tagging, Labeling, and Marking of Government-Furnished

Property

APR 2012

252.245-7002 Reporting Loss of Government Property JAN 2021 252.245-7003 Contractor Property Management System Administration APR 2012 252.245-7004 Reporting, Reutilization, and Disposal DEC 2017

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (OCT 2020)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services-- Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Items. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [] will, [] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [] does, [] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (OCT 2020)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2020) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (JUN 2020) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

___ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L.

109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub.

L. 111-117, section 743 of Div. C).

___ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (JUN 2020) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (MAR 2020) (15 U.S.C. 657a).

____ (ii) Alternate I (MAR 2020) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (MAR 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (MAR 2020) of 52.219-4.

____ (13) [Reserved]

X (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (MAR 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (MAR 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (JUN 2020) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (JUN 2020) of 52.219-9.

____ (18) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (19) 52.219-14, Limitations on Subcontracting (MAR 2020) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (MAR 2020) (15 U.S.C. 657f).

X (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (MAY 2020) (15 U.S.C. 632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women- Owned Small Business (EDWOSB) Concerns (MAR 2020) (15 U.S.C. 637(m)).

____ (24) 52.219-30, Notice of Set-Aside for, or…