C05_05_Full_Combined_Synopsis_Solicitation_-_Hyrum_SS_Slide_Gates.pdf

Cover Page

This combined Synopsis / Solicitation is a Total Small Business Set-Aside using NAICS code 332312 Fabricated Structural Metal Manufacturing; This is a total small business set-aside with size standard of 500 Employees. This combined synopsis/solicitation for commercial items is prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation to be issued; quotes are being requested and a written solicitation using the Standard Form 1449 will not be issued.

Solicitation Closing Date: Monday April 14,2025 Solicitation Closing Time: 1400 (2:00 PM) Mountain Standard Time

ONLY ELECTRONIC QUOTES will be accepted for this requirement. Quotes must be electronically delivered to:

Mrs. Kimberley Hervat E-mail: khervat@usbr.gov

E-mailed quotes must be in the following format: One (1) PDF documents, technical quote and pricing as combined document.

E-mailed quotes must be received by the Contract Specialist via e-mail no later than 14:00 hours (2:00 PM) MT April 14, 2025 to be considered for award.

E-mail subject line should contain the following naming scheme:

Quote – 140R4025Q0041 – Stainless Steel Slide Gates

Inquiries regarding this Solicitation should be made to:

Mrs. Kimberley Hervat, Contract Specialist E-mail: khervat@usbr.gov Phone: 801-524-3680

All correspondence regarding this Solicitation should reference the Solicitation Number and Project Name “140R4025Q0041 – Stainless Steel Slide Gates” in the subject line.

DEADLINE FOR QUESTIONS: Questions must be submitted to the Contract Specialist no later than April 9, 2025 (2:00 PM). Any questions submitted after the deadline will not be answered.

Please read Clause 52.212-2 Evaluation – Commercial Items thoroughly for evaluation of quote and award information.

NOTE: All quotes MUST be submitted in one attachment, the technical package including a pamphlet and the pricing schedule must be submitted together.

mailto:khervat@usbr.gov

COMBINED SYNOPSIS/SOLICITATION

Stainless Steel Slide Gates

This is a combined synopsis/solicitation for commercial products or services prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation number 140R4025Q0041 is issued as a Request for Quotation (RFQ).

The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-03. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. They may be accessed in full text at the following websites: https:/www.acquisition.gov/far/ and https://www.acquisition.gov/diar.

This combined synopsis & solicitation notice is a request for competitive quotations.

Therefore, all capability statements or quotations received prior to the RFQ close date will be considered.

The associated North American Industrial Classification System (NAICS) code for this procurement is 332312 with an associated small business size standard of 500.

The purpose of this combined synopsis and solicitation is for the purchase and delivery of Stainless Steel Slide Gates IAW the attached Specifications (attachment 1). The bid schedule and contract line-item number (CLIN) schedule is below:

QUANTITIES

Item Description

Bid Item Qty Unit Unit

Price Price

1 Fresno Fabricated slide gate #304 SS, 62.5” wide x 61” high

1 ea

Valve and w/122” Frm, Self-Contained, Rising Stem w/Stem Cover, Castings 3-Sided J-Seal, With Gear Lift, Left Wall Mount, Right Fabricated Wall mount, Bottom Wall Mount Flush, Top Wall Mount, Slide Gate Seating Head 10 ft, Unseating Head, 10’. 61” of vertical (or approved travel required. Other manufacturers are acceptable equivalent) provided they meet the same criteria contained in this specification.

2 Fresno Fresno Valve and Coatings, Fabricated slide gate #304 SS, 2 ea

Valve and 98.5” wide x 61” high w/122” Frm, Self-Contained, Rising Castings Stem w/Stem Cover, 3-Sided J-Seal, With Gear Lift, Left Fabricated Wall Mount, Right Wall mount, Bottom Wall Mount Flush, Slide Gate Top Wall Mount, Seating Head 10 ft, Unseating Head, 10’.

(or approved 61” of vertical travel required. Other equivalent) manufacturers are acceptable provided they meet the same criteria contained in this specification.

http://www.acquisition.gov/far/ https://www.acquisition.gov/diar

140R6023Q0058 – WY Gauge Equipment Page | 2

3 Fresno Fresno Valve and Coatings, Fabricated slide gate #304 SS, 2 ea

Valve and 99” wide x 51” high w/124” Frm, Self-Contained, Rising Castings Stem w/Stem Cover, 3-Sided J-Seal, With TandemGear Lift, Fabricated Left Wall Mount, Right Wall mount, Bottom Wall Mount Slide Gate Flush, Top Wall Mount, Seating Head 10 ft, Unseating (or approved Head, 10’. 73” of vertical travel required. Other equivalent) manufacturers are acceptable provided they meet the same criteria contained in this specification.

4 Fresno Fresno Valve and Coatings, Fabricated slide gate #304 SS, 2 ea

Valve and 111” wide x 30” high w/103” Frm, Self-Contained, Rising Castings Stem w/Stem Cover, 3-Sided J-Seal, With TandemGear Lift, Fabricated Left Wall Mount, Right Wall mount, Bottom Wall Mount Slide Gate Flush, Top Wall Mount, Seating Head 10 ft, Unseating (or approved Head, 10’. 73” of vertical Travel Required.

equivalent) Other manufacturers are acceptable provided they meet the same criteria contained in this specification.

5 Rotork gate actuator

Rotork IQ Series 24VDC Actuator (or equivalent equal) 6 ea

Total

Total price shall be inclusive of all applicable fees and taxes. The required delivery for the fully fabricated and assembled gates is 112 Days (16wks) and the gate actuators shall be delivered within 168 Days (24wks) after receipt of order. Shipping costs shall be included in this solicitation. Inspection and acceptance will be performed by the Government at destination. F.O.B. Destination at:

Bureau of Reclamation- Pleasant Grove Office (PG) Pleasant Grove Office 315 W 1100 N Pleasant Grove, UT 84062 USA

The provision at 52.212-1, Instructions to Offerors – Commercial Products and Commercial Services, applies to this acquisition. Addendum to 52.212-1 substitutes the term “quote” where the term “offer” appears in the provision

The provision at 52.212-2, Evaluation – Commercial Products and Commercial Services, applies to this acquisition. The specific evaluation criteria to be included in paragraph

(a) of that provision is as follows: Best Value

The government will apply the following comparative evaluation process as the basis for award:

Factor 1 - Technical Capability - Proposals will be assessed based on the technical features outlined in the specifications.

Factor 2 - Delivery Date - Evaluation of the proposed delivery timelines provided by each contractor.

Factor 3 -Price - Comparison of the overall pricing of each quote.

Combined Synopsis/Solicitation Template eFile – C05

(04/2023)

140R6023Q0058 – WY Gauge Equipment Page | 3

The provision at 52.212-3, Offeror Representations and Certifications – Commercial Products and Commercial Services, must be completed and be active online at http://www.sam.gov. Prospective contractor is advised to ensure that the NAICS code identified for this procurement is contained in its online representations and certifications in the System for Award Management registry.

The clause at 52.212-4, Contract Terms and Conditions – Commercial Products and Commercial Services, applies to this acquisition along with an addendum that includes the following clauses applicable to this procurement:

CLAUSES INCORPORATED BY REFERENCE:

The clause at 52.212-4, Contract Terms and Conditions-Commercial Items applies. The following addenda to 52.212-4 apply:

52.204-7 System for Award Management (Nov 2024) 52.204-8 Annual Representations and Certifications (Jan 2025) 52.204-13 System for Award Management Maintenance (Oct 2018) 52.204-16 Commercial and Government Entity Code Reporting (Aug 2020) 52.204-17 Ownership or Control of Offeror (Aug 2020) 52.204-18 Commercial and Government Entity Code Maintenance (Aug 2020) 52.204-19 Incorporation by Reference of Representations and Certifications (Dec 2014) 52.204-24 Representation Regarding Certain Telecommunications and Video

Surveillance Services or Equipment (Nov 2021) 52.204-26 Covered Telecommunications Equipment or Services- Representation

(Oct 2020) 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Jan 2025) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar

2023) 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video

Surveillance Services or Equipment (Nov 2021) 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-

Representation (Nov 2015) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015) 52.222-3 Convict Labor (Jun 2003)

Combined Synopsis/Solicitation Template eFile – C05 http://www.sam.gov/

140R6023Q0058 – WY Gauge Equipment Page | 4

The following select clauses at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Products and Commercial Services, apply to this acquisition:

52.204-27 Prohibition on a ByteDance Covered Application (Jun 2023) 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors

52.222-36 Debarred, Suspended, or Proposed for Debarment (Jan 2025) Equal Opportunity for Workers with Disabilities (Jun 2020)

52.222-50 Combating Trafficking in Persons (Nov 2021)

CLAUSES INCORPORATED BY FULL TEXT

FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov.

(End of Clause)

DOI-AAAP-0028 ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS-

INVOICE PROCESSING PLATFORM (IPP) (APR 2013)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

"Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

The Contractor shall submit an electronic copy of the IPP invoice to the Contracting Officer Representative (COR) to sign and copy the Contracting Officer. Once the invoice is signed by the COR, then upload and submit signed invoice to IPP. Failure to email the invoice may cause significant delay or possible rejection of your payment request.

Contracting Officer (CO), Russell Oaks at rdoaks@usbr.gov

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in

Combined Synopsis/Solicitation Template eFile – C05

(04/2023) https://www.acquisition.gov/ http://www.ipp.gov/ mailto:rdoaks@usbr.gov

140R6023Q0058 – WY Gauge Equipment Page | 5

SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its quote.

(End of Local Clause)

WBR 1452.201-80 Contracting Officer’s Representative’s Authorities and Limitations – Bureau of Reclamation (MAY 2018)

(a) Performance of the work under this contract shall be subject to the technical direction of the Reclamation Contracting Officer's Representative (COR). The term “technical direction” is defined to include, without limitation:

(1) Inspecting and accepting or rejecting work performed under the contract.

(2) Representing the Government in technical phases of the work. The COR is responsible for the technical administration of the contract and will provide instructions and interpretations to the Contractor on all technical matters relating to the contract. The COR will supervise or oversee all Government technical and administrative personnel assigned to assist the COR.

(3) Reviewing and, where required by the contract, approving submittals of technical data, shop drawings, samples, literature, plans, or other data required to be delivered by the Contractor to the Government.

(b) The Contractor will receive a copy of the written COR designation from the Contracting Officer. It will specify the extent of the COR's authority to act on behalf of the Contracting Officer.

(c) Technical direction must be within the scope of work stated in the contract. Only the Contracting Officer is authorized to determine if a change is within the scope of the contract;

therefore, the COR does not have the authority to, and may not, issue any technical direction that -

(1) Constitutes a direction of additional work outside the Contract requirements;

(2) Constitutes a change as defined in the contract clause entitled “Changes;”

(3) In any manner causes an increase or decrease in the total contract cost, or the time required for contract performance;

(4) Changes any of the expressed terms, conditions, or specifications of the contract; or

(5) Interferes with the Contractor's right to perform the terms and conditions of the contract.

(d) All technical direction shall be issued in writing by the COR.

(e) The Contractor must proceed promptly with the performance of technical direction duly issued by the COR in the manner prescribed by this clause and within its authority under the provisions of this clause. If, in the opinion of the Contractor, any instruction or direction by the COR falls within one of the categories defined in (c)(1) through (c)(5) of this clause, the Contractor must not proceed and must notify the Contracting Officer in writing within five

Combined Synopsis/Solicitation Template eFile – C05 mailto:IPPCustomerSupport@fiscal.treasury.gov

140R6023Q0058 – WY Gauge Equipment Page | 6

(5) working days after receipt of any such instruction or direction and must request the Contracting Officer to modify the contract accordingly. Upon receiving the notification from the Contractor, the Contracting Officer must -

(1) Advise the Contractor in writing after receipt of the Contractor's letter that the technical direction is within the scope of the contract effort and does not constitute a change under the Changes clause of the contract; or

(2) Advise the Contractor that the Government will issue a written change order.

(f) A failure of the Contractor and Contracting Officer either to agree that the technical direction is within the scope of the contract or to agree upon the contract action to be taken with respect to the technical direction will be subject to the provisions of the clauseentitled “Disputes.”

(End of Clause)

Quotes are due on April 14, 2025, (2:00 PM) MT. All questions/inquiries must be submitted to the Contracting Officer (CO) via e-mail no later than (2:00 PM) MT on April 9, 2025. Inquiries submitted via telephone calls or mail submission will not be accepted. Submit quotes or any questions to CO Russell Oaks at rdoaks@usbr.gov or Contract Specialist Kimberley Hervat at khervat@usbr.gov. Offerors who fail to complete and submit the requirements above may be considered non-responsive.

Please provide the following information with your quote:

Company Name:

UEI Number:

Cage Code:

Combined Synopsis/Solicitation Template eFile – C05

(04/2023) mailto:rdoaks@usbr.gov

Hyrum Channel

Hyrum, UT Rev. 2 Materials Specifications

Hyrum Discharge Channel

STAINLESS STEEL SLIDE GATES

INTRODUCTION

The Bureau of Reclamation, Upper Colorado Region, requires stainless steel slide gates for installation on diversion structures in the new Hyrum discharge channel. Vendor shall be responsible for supply and delivery, and for submitting shop drawings showing dimensions, assembly, and mounting to Reclamation for review and approval prior to starting fabrication of the gates.

QUANTITIES

Item Description Bid Item Quantity Unit

Unit Price

Price

1 Fresno Valve Fabricated slide gate #304 SS, 62.5” wide x 61” high

1 ea and Castings w/122” Frm, Self-Contained, Rising Stem w/Stem Cover, Fabricated 3-Sided J-Seal, With Gear Lift, Left Wall Mount, Right Slide Gate (or Wall mount, Bottom Wall Mount Flush, Top Wall Mount, approved Seating Head 10 ft, Unseating Head, 10’. 61” of vertical equivalent) travel required. Other manufacturers are acceptable provided they meet the same criteria contained in this specification.

2 Fresno Valve Fresno Valve and Coatings, Fabricated slide gate #304 SS, 2 ea and Castings 98.5” wide x 61” high w/122” Frm, Self-Contained, Rising Fabricated Stem w/Stem Cover, 3-Sided J-Seal, With Gear Lift, Left Slide Gate (or Wall Mount, Right Wall mount, Bottom Wall Mount approved Flush, Top Wall Mount, Seating Head 10 ft, Unseating equivalent) Head, 10’. 61” of vertical travel required. Other manufacturers are acceptable provided they meet the same criteria contained in this specification.

00030 Fresno Valve Fresno Valve and Coatings, Fabricated slide gate #304 SS, 2 ea and Castings 99” wide x 51” high w/124” Frm, Self-Contained, Rising Fabricated Stem w/Stem Cover, 3-Sided J-Seal, With TandemGear Slide Gate (or Lift, Left Wall Mount, Right Wall mount, Bottom Wall approved Mount Flush, Top Wall Mount, Seating Head 10 ft, equivalent) Unseating Head, 10’. 73” of vertical travel required. Other manufacturers are acceptable provided they meet the same criteria contained in this specification.

00040 Fresno Valve Fresno Valve and Coatings, Fabricated slide gate #304 SS, 2 ea and Castings 111” wide x 30” high w/103” Frm, Self-Contained, Rising Fabricated Stem w/Stem Cover, 3-Sided J-Seal, With TandemGear Slide Gate (or Lift, Left Wall Mount, Right Wall mount, Bottom Wall approved Mount Flush, Top Wall Mount, Seating Head 10 ft, equivalent) Unseating Head, 10’. 73” of vertical Travel Required.

Other manufacturers are acceptable provided they meet the same criteria contained in this specification.

00050 Rotork gate actuator

Rotork IQ Series 24VDC Actuator (or equivalent equal) 6 ea

Total

Hyrum, UT Rev. 2 Materials Specifications

LOCATION

Delivery will be to Reclamation’s equipment and drill shop in Pleasant Grove, UT. This location can service a delivery truck, has a forklift, and an address, of which Hyrum Dam does not. The delivery address is: 315 W 1100 N, Pleasant Grove, UT 84062.

Figure 1 - Map showing delivery location at 315 W 1100 N, Pleasant Grove, UT 84062.

Hyrum, UT Rev. 2 Materials Specifications

STAINLESS STEEL SLIDE GATES

PART 1 GENERAL

1.01 QUANTITY

A. Gates

1. See dimensions and quantity in the table below.

Approx Gate

Location (Station)

Jensen Box Culvert

Opening Size (Nominal

WXH)

Gate Inside Width

(To be verified by Fresno)

(Inches)

Top Gate Height

(When fully closed) (Inches)

Required minimum vertical Movement

(Inches)

Box CulvertNominal

Opening Vertical

Frame Height =Vertical opening + gate height

2+40 (Right Bank) 60X60 62.5 61 61 61 122 2+50 96X60 98.5 61 61 61 122

12+90 96X72 99 51 73 73 124 18+25 108X72 111 30 73 73 103

Hyrum, UT Rev. 2 Materials Specifications

B. Gate Actuators

1. Rotork IQ Series 24 VDC Gate Actuator

2. Quantity: 6

1.02 REFERENCE STANDARDS

A. American Water Works Association (AWWA)

1. AWWA C561-21 Fabricated Stainless Steel Slide Gates

2. AWWA C561-14 Open-Channel Fabricated-Stainless Steel Slide Gates

3. AWWA C540-02 Power-Actuating Devices For Valves and Slide Gates

1.03 DEFINITIONS

A. Face and back pressure heads: Head at vertical distance from center of gate to maximum water surface.

1.04 SUBMITTALS

A. Submit the following at least 5 days prior to gate fabrication. Digital submittals are accepted, pdf format is preferred. Please email to COR Ryan Proctor @ rproctor@usbr.gov.

1. Shop drawings. Submit 1 set of drawings in .pdf format that clearly show at a minimum all connection details, gate dimensions, materials, elevations, fasteners, materials & weights, and appurtenances.

2. Complete set of O&M manuals

3. Installation guidelines

PART 2 PRODUCTS

2.01 STAINLESS STEEL SLIDE GATES

A. Design and manufacture:

1. Gate shall be designed and manufactured to the standards of commercial equipment, incorporating the latest industry standards.

2. Manufacturer shall review civil design drawings prior to and in conjunction with producing shop drawings to ensure no conflicts exist.

3. Any design conflicts shall be reported to the COR, Ryan Proctor, who will meet with Reclamation design team and manufacturer’s design engineer to establish a solution within 3 business days.

4. Seating head: 10-feet maximum

5. Gate lift: 24VDC Gate Actuator.

mailto:rproctor@usbr.gov mailto:rproctor@usbr.gov

Hyrum, UT Rev. 2 Materials Specifications

a. Include handwheel on actuator. Force required to open or close gate under applicable face and back pressure heads, maximum: 40 pounds.

b. Lifting nut: Bronze.

c. Provide for lubrication.

d. Actuator shall have the option to communicate via RS-485 using the

Modbus RTU protocol for monitoring system variables and to provide remote control of the actuator.

6. Mounting: Flat back. Gate Thimbles not required.

a. The guide rails and head rail shall be an integral unit of extrusions and structural shapes, rigidly assembled to form the waterway opening.

b. Holes shall be provided for mounting anchor bolts.

c. Guide rails and head rails shall be ASTM 304, 304L, or 316 Stainless, or

316L Stainless Steel, at manufacturer’s recommendation.

7. Frame and Slide:

a. Gate frames and slides shall be Stainless Steel ASTM 304, 304L, or 316 Stainless, or 316L Stainless Steel, at manufacturer’s recommendation.

b. Machine bronze seating surfaces.

8. Seals

a. “J” seals shall be provided, securely fastened to the frame with formed stainless steel retainers and shall be replaceable and adjustable without removing the gate from the installed position.

b. “J” seal corners shall be vulcanized.

2.02 STEM AND STEM GUIDES FOR SLIDE GATES

A. Design and manufacture in accordance with AWWA C560 and AWWA C561, except:

1. No portion of stem shall have cross-sectional area smaller than root area of threaded portion of stem.

2. Stem may have upset end or stem block.

3. Stem block:

a. Thread or screw onto bottom end of stem or designed for an upset stem end.

b. Rigidly pin or key to stem.

4. Stem guides: Fully adjustable.

5. Stem cover: Clear plastic marked to show gate position.

Hyrum, UT Rev. 2 Materials Specifications

PART 3 DELIVERY, STORAGE, HANDLING

3.01 DELIVERY

A. Provide shipping blocks, plugs, caps, and cribbing to protect the gates during shipment until installation is made.

B. Ship gates and associated components to Bureau of Reclamation, 315 W 1100 N, Pleasant Grove, UT 84062.

C. Vendor shall deliver the fully fabricated and assembled gates, along with the gate actuators within 16 weeks of contract award.

D. Gate Actuators shall be delivered within 24 weeks of contract award.

END OF SECTION

Clauses

DOI-AAAP-0028 ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS-INVOICE

PROCESSING PLATFORM (IPP) (FEB 2021)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

'Payment request' means any request for contract financing payment or invoice payment by the Contractor.

To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts.

The IPP website address is: https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

The Contractor shall submit an electronic copy of each invoice to Mr. Ryan Proctor the Contracting Officer’s Representative (COR), by electronic mail (e-mail) at rproctor@usbr.gov. Mr. Proctor will evaluate the submitted invoice and will provide an approval by emailing the contractor with an attached signed invoice. The COR may also reject the invoice; in this case, an email will be provided to the contractor with detailed information to revise the invoice as needed for approval.

Once an approved invoice is received, the contractor is encouraged to upload, as an attachment, a copy of the approved invoice with the COR’s signature, PRIOR to clicking “submit” in IPP. Please send an e-mail copy to the Contracting Officer, Mr. Russell Oaks at rdoaks@usbr.gov and contract specialist Ms.

Kimberley Hervat at khervat@usbr.gov. Failure to follow this process may cause significant delay or possible rejection of your payment request.

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone

(866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

http://www.ipp.gov/ http://www.ipp.gov/ mailto:rproctor@usbr.gov mailto:rdoaks@usbr.gov mailto:IPPCustomerSupport@fiscal.treasury.gov

(End of Local Clause)

DOI-AAAP-0050 CONTRACTOR PERFORMANCE ASSESSMENT REPORTING SYSTEM (DEC

2015)

1) FAR 42.1502 directs all Federal agencies to collect past performance information on contracts. The Department of the Interior (DOI) has implemented the Contractor Performance Assessment Reporting System (CPARS) to comply with this regulation. One or more past performance evaluations will be conducted in order to record your contract performance as required by FAR 42.15.

2) The past performance evaluation process is a totally paperless process using CPARS. CPARS is a web-based system that allows for electronic processing of the performance evaluation report. Once the report is processed, it is available in the Past Performance Information Retrieval System (PPIRS) for Government use in evaluating past performance as part of a source selection action.

3) We request that you furnish the Contracting Officer (CO) with the name, position title, phone number, and email address for each person designated to have access to your firm's past performance evaluation(s) for the contract no later than 30 days after award. Each person granted access will have the ability to provide comments in the Contractor portion of the report and state whether or not the Contractor agrees with the evaluation, before returning the report to the Assessing Official (AO). Information in the report must be protected as source selection sensitive information not releasable to the public.

4) When your Contractor Representative(s) are registered in CPARS, they will receive an automatically generated email with detailed login instructions. Further details, systems requirements, and training information for CPARS is available at https://www.cpars.gov/.

5) Within 60 days after the end of a performance period, the AO will complete an interim or final past performance evaluation, and the report will be accessible at https://www.cpars.gov/.

a) Contractor Representatives may then provide comments in response to the evaluation, or return the evaluation without comment.

b) Your comments should focus on objective facts in the AO's narrative and should provide your views on the causes and ramifications of the assessed performance.

c) All information provided should be reviewed for accuracy prior to submission.

d) If you elect not to provide comments, please acknowledge receipt of the evaluation by indicating "No comment" in the space provided, and then selecting “Accept the Ratings and Close the Evaluation”.

e) Your response is due within 60 calendar days after receipt of the CPAR. On day 15, the evaluation will become available in PPIRS-RC marked as “Pending” with or without comments and whether or not it has been closed.

f) If you do not sign and submit the CPAR within 60 days, it will automatically be returned to the Government and will be annotated: "The report was delivered/received by the contractor on (date). The contractor neither signed nor offered comment in response to this assessment."

6) The following guidelines apply concerning your use of the past performance evaluation:

a) Protect the evaluation as source selection information. After review, transmit the evaluation by completing and submitting the form through CPARS. If for some reason you are unable to view and/or http://www.cpars.gov/ http://www.cpars.gov/ http://www.cpars.gov/ submit the form through CPARS, contact the CO for instructions.

b) Strictly control access to the evaluation within your organization. Ensure the evaluation is never released to persons or entities outside of your control.

c) Prohibit the use of or reference to evaluation data for advertising, promotional material, pre-award surveys, responsibility determinations, production readiness reviews, or other similar purposes.

7) If you wish to discuss a past performance evaluation, you should request a meeting in writing to the CO no later than seven days following your receipt of the evaluation. The meeting will be held in person or via telephone or other means during your 60-day review period.

8) A copy of the completed past performance evaluation will be available in CPARS for your viewing and for Government use supporting source selection actions after it has been finalized.

--- End of Addendum to 52.212-4---

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (JAN

2025)

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN

INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[X] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

[ ] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

[ ] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

(4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

[ ] (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

[ ] (6) [Reserved].

[ ] (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[ ] (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[X] (9) 52.204-27 Prohibition on a ByteDance Covered Application (JUN 2023)

(10) 52.204–28, Fe[ ]deral Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) ( Pub. L. 115–390, title II).

[ ] (11)(i) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

(ii) Alternate[ ] I (Dec 2023) of 52.204–30.

[X](12)52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (JAN 2025) (31 U.S.C. 6101 note).

[ ] (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

[ ] (14) [Reserved] [ ] (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C. 657a).

[ ] (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

(17) [Reserve[ ]d]

[X] (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-6.

[ ] (19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-7.

[ ](20) 52.219-8, Utilization of Small Business Concerns (JAN 2025) (15 U.S.C. 637(d)(2) and (3)).

[ ](21) (i) 52.219-9, Small Business Subcontracting Plan (JAN 2025) (15 U.S.C. 637(d)(4)).

[ ] (ii) Alternate I (Nov 2016) of 52.219-9.

[ ] (iii) Alternate II (Nov 2016) of 52.219-9.

[ ] (iv) Alternate III (Jun 2020) of 52.219-9.

[ ](v) Alternate IV (JAN 2025) of 52.219-9

[ ] (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

https://www.acquisition.gov/far/52.203-17#FAR_52_203_17 https://www.govinfo.gov/link/uscode/41/4712 https://www.acquisition.gov/far/3.900#FAR_3_900 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/part-52#FAR_52_209_6

[ ] (ii) Alternate I (Mar 2020) of 52.219-13.

[ ](23) 52.219-14, Limitations on Subcontracting (OCT 2022) Limitations on Subcontracting (Oct 2022) (15 U.S.C. 637s).

[ ] (24) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

[ ] (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C.

657f).

[X](26) (i) 52.219-28, Postaward Small Business Program Representation (JAN 2025) (15 U.S.C.

632(a)(2)).

[ ] (ii) Alternate I (MAR 2020) of 52.219-28.

[ ] (27) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

[ ] (28) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

[ ] (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C.

644(r)).

[ ](30) 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15 U.S.C. 637(a)(17)).

[ ] (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

[X](32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (JAN 2025) (E.O.13126).

[ ] (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

[ ] (34) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

[ ] (ii) Alternate I (Feb 1999) of 52.222-26.

[X] (35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (ii) Alternate I (Jul 2014) of 52.222-35.

[X] (36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C.

793). [ ] (ii) Alternate I (Jul 2014) of 52.222-36.

[X] (37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

[X] (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

[X] (39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O.

13627).

[ ] (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[X](40) 52.222-54, Employment Eligibility Verification (Jan 2025) ( Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

[ ] (41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[X](42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) ( 42 U.S.C. 7671, et seq.).

[X](43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) ( 42 U.S.C. 7671, et seq.).

[X](44) 52.223-20, Aerosols (May 2024) ( 42 U.S.C. 7671, et seq.).

[X](45) 52.223-21, Foams (May 2024) ( 42 U.S.C. 7671, et seq.).

[X](46) 52.223-23, Sustainable Products and Services (May 2024) ( E.O. 14057, 7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

[ ] (47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

[ ] (ii) Alternate I (Jan 2017) of 52.224-3.

[ ] (48) (i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

[ ] (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C.

https://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title15-section637&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_54 https://www.federalregister.gov/executive-order/12989 https://www.acquisition.gov/far/part-22#FAR_22_1803 https://www.acquisition.gov/far/part-52#FAR_52_223_11 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/part-52#FAR_52_223_12 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/part-52#FAR_52_223_20 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/part-52#FAR_52_223_21 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/part-52#FAR_52_223_23 https://www.federalregister.gov/executive-order/14057 https://www.govinfo.gov/link/uscode/7/8102 https://www.govinfo.gov/link/uscode/42/6962 https://www.govinfo.gov/link/uscode/42/6962 https://www.govinfo.gov/link/uscode/42/8259b https://www.govinfo.gov/link/uscode/42/7671l chapter 29 (sections 4501-4732), Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[ ] (ii) Alternate I [Reserved].

[ ](iii) Alternate II (JAN 2025) of 52.225-3.

[ ] (iv) Alternate III (NOV 2023) of 52.225-3.

[ ] (50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[ ] (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[ ] (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

[ ] (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C.

5150).

[ ] (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

[X](55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) ( E.O. 13513).

[ ] (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

[ ] (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[ ] (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[X] (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018) (31 U.S.C. 3332).

[ ] (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

[ ] (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[ ] (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[ ](64) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

[ ](65) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).

[ ] (ii) Alternate I (Apr 2003) of 52.247-64.

[ ] (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

[ ] (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

This Statement is for Information Only: It is not a Wage Determination

Employee Class Monetary Wage-Fringe Benefits

[List as necessary]

[ ] (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

https://www.acquisition.gov/far/part-52#FAR_52_226_8 https://www.federalregister.gov/executive-order/13513

[ ] (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

[ ] (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

[ ] (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

[ ] (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

[ ] (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

[ ] (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) ( 41 U.S.C. 3509).

(ii) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712).

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

(vii) (A) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

(B) Alternate I (Dec 2023) of 52.204–30.

(viii) 52.219-8, Utilization of Small Business Concerns (JAN 2025) ( 15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(x) 52.222-26, Equal Opportunity (Sep 2015) (E.O.11246).

(xi) 52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212).

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) ( 29 U.S.C. 793).

(xiii) 52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212).

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222- 40.

(xv) 52.222-41, Service Contract Labor Standards (Aug 2018) ( 41 U.S.C. chapter 67).

(xvi) (A) 52.222-50, Combating Trafficking in Persons (Nov 2021) ( 22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (Mar 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627).

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) ( 41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) ( 41 U.S.C. chapter 67).

(xix) 52.222-54, Employment Eligibility Verification (JAN 2025) (E.O. 12989).

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(xxii) (A) 52.224-3, Privacy Training (Jan 2017) ( 5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) ( 42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar…