C05_05_Combined_Synopsis_Solicitation_rev.pdf

COMBINED SYNOPSIS/SOLICITATION

140R2023Q0128

NCAO Keswick Gantry Crane Controls Upgrade Bureau of Reclamation Shasta Dam

Northern California Area office (NCAO) 16349 Shasta Dam Blvd Shasta Lake, CA 96019

Contracting Office:

Bureau of Reclamation

Interior Region 10 • California-Great Basin Acquisitions and Services Division

Supply and Services Branch Sacramento CA 95825

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with FAR Part 13 and additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation number 140R2023Q0108 is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-04 effective June 02, 2023.

GENERAL INFORMATION

RFQ Number: 140R2023Q0128

Request for Quotation (RFQ) Request for Proposal

(RFP) Invitation for Bid

(IFB)

Attachment:

Specifications Document

This acquisition is set-aside 100 percent Small Business concerns only. (Large businesses may not submit a quote.)

North American Industry Classification Code

(NAICS): 335931

Size Standard: 600 employees

Quote Due Date:

Quote Submission:

August 11, 2023 03:00 PM Pacific Daylight Time

By email to kdbrooks@usbr.gov

Contact Information: Kendall Brooks Email: kdbrooks@usbr.gov

Delivery Term: FOB Destination

Delivery Destination: US Bureau of Reclamation mailto:kdbrooks@usbr.gov

QUOTER INFORMATION

Quoter’s Business Information:

Business Name: _______________________________

Business Size (select one): Small Large

SAM Unique Entity Identifier (UEI ID)/Cage Code: ______________________

CLIN

QTY UM MFR/CAT PN MFR DESCRIPTION UNIT

PRICE

PRICE

1 2 Ea. CE4T-10R-01 ABB

2.5mm, Non- Illuminated, Red, Plastic Twist Release, Range: Compact, Maintained, Emergency Stop Pushbutton. 40mm Diameter, 600V Rated. Includes: 1 Normally Closed Contact.

2 1 Ea. MEP2-0 ABB

22.5 mm, non-metallic, heavy-duty, watertight/oiltight, pilot device enclosure, dark gray over light gray, polycarbonate, 2 element, 2 contact block depth, NEMA 1, 3R, 4, 4X, 12, 13

3 1 Ea. PG16-1/2NPT ABB

Enclosure adaptor for use on MS116 and 132 manual motor controllers

4 1 Ea.

20-750- 2262C-2R

Allen- Bradle y

Powerflex 750 series, ac drive, 12 points, 24VDC, 22 series, QUOTE/PRICING SCHEDULE

2AI,2AO,6DI,2RO,

I/O module

5 1 Ea.

20-750-ENC-

Allen- Bradle y

Powerflex 750 series, ac drive, feedback option, single channel, incremental encoder

6 1 Ea.

20-750-

NEMA1-F3

Allen- Bradle y

Powerflex 750 series, ac drive, NEMA 1, enclosure kit, frame 3

7 1 Ea.

20G11ND040

JA0-NNNNN

Allen- Bradle y

Standard protection, forced air cooled, 480VAC, 3-phase input, 40A output rating, open type, frame 3, DB transistor, moderate hoist duty, 30HP (ND) rating, AC input w/ DC terminals, filtered, CM jumper installed, 17.87" (height) x 7.48" (width) x 8.35" (depth), external 24VDC power supply, Power Flex Series 755, AC variable frequency drive

8 1 Ea. 20-HIM-A6

Allen- Bradle y

Powerflex archetecture class, LCD display, NEMA 1, Human Interface Module

9 1 Ea.

512-DAB-

A2L-1-4RG-

6P-909

Allen- Bradle y

NEMA TYPE1, size 3, 30" x 20" x 9", 480V, 50HP, 250VA 480/120 control transformer, red and green LED pilot lights, surge surpressor, 12 pt.

terminal block, one disconnect N.C.

auxiliary contact, one contactor N.O. aux contact, combination contactor/non-fused disconnect, 512-DAB-

A2L-1-4RG-6P-909

10 1 Ea.

800H-

FRXT6A4

Allen- Bradle y

AB 800H-FRXT6A4

SWITCH,PUSHBUTT

ON

11 2 Ea. 510 Applet on

4", zinc die cast, chase nipple

12 6 Ea. CL75MN Applet on

3/4" strap, 1-hole, malleable iron, galvanized, for RMC

13 100 Ft. 34R Applet on

Rigid Conduit, 3/4", Galvanized Steel, 10'

14 4 Ea. 4DCIGBU Applet on

4", Insulated Ground Bushing, Set-Screw Type, Bushing Material: Zinc Die Cast, Lug Material:

Aluminum. Wire Size:

14 AWG (Solid) - 2/0 AWG (Stranded). For Copper or Aluminum Grounding

15 1 Ea. APPLB75A Applet on

Conduit Body, Type:

LB, FM85, Size: 3/4", Material: Copper Free Aluminum.

16 2 Ea. CL150MN Applet on

Conduit Strap, 1-Hole, 1-1/2", Malleable Iron, Hot Dipped Galvanized

17 1 Ea. CL75MN Applet on

3/4" Strap, 1-Hole, Malleable Iron, Hot Dipped Galvanized, 18 2 Ea. CLB150MN Applet on

Clamp Back, Rigid, 1- 1/2 inch, Malleable Iron

19 7 Ea. CLB75MN Applet on

3/4" clamp back, 1-hole, malleable iron, galvanized, for RMC

20 22 Ea. GIB200L4AC Applet on

2", Insulated Ground Bushing, Threaded, Bushing Material:

Malleable Iron, Lug Material: Aluminum.

Wire Size: 14 AWG (Solid) - 4 AWG (Stranded). For Copper or Aluminum Grounding.

21 3 Ea. GK75V Applet on

3/4", composition fiber, conduit body gasket

22 2 Ea. HUB150DN Applet on

Conduit Hub, 1-1/2", Insulated, Raintight, Zinc Die Cast

23 7 Ea. HUBG75DN Applet on

Grounding Hub, 3/4", Insulated, Gasketed, Watertight, Zinc Die Cast

24 3 Ea. K75 Applet on

3/4", screw on, stamped steel, conduit body cover

25 5 Ea. LB150M Applet on

3/4", malleable iron, type LB, conduit body

26 1 Ea. ST9075 Applet on

Liquidtight Connector, 3/4", 90°, Non- Insulated, Malleable Iron

27 1 Ea. STB75 Applet on

Liquidtight Connector, Straight, 3/4", Insulated, Steel

28 10 Ea. 406 Arlingt on

Conduit Locknut, 2", Steel/Zinc Plated

29 3 Ea. LPCG50 Arlingt on

1/2", non-metallic, cord range: 0.2"- 0.472", compression connector

30 1 Ea. LPCG757 Arlingt on

Cord Connector, Low Profile, 3/4", Non- Metallic

31 1 Ea. LT75A Arlingt on

Liquidtight Connector, Straight, Size: 3/4 Inch, Insulated, Zinc Die Cast

32 1 Ea.

ZDVSCP4103

T Baldor

MOTOR 25 HP, 1800

RPM, 230/460 VAC,

3PH, 60HZ, 30A

(FLA), 4-pole, NEMA Frame 284TC, TEFC Enclosure, 93.9 full load efficiency, low-noise design, severe duty, insulated bearings, 1-7/8" dia shaft, c-face/rigid base mounting, 40 deg. C isul. Class, constant torque, 3- thermostats (1/ph), HSD38-1024- G-4-3-J-0-D Incremental Encoder, Size 38, 1", differential bi-directional with index

(AA BB ZZ), 5-26V

in, 5-26V differential line driver out (7272), 8 pin M12 connector, no code 7 option, Cast aluminum housing slotted tether included with cover kit, 112860-0010 8-pin M12 cable assembly for use with differential line driver output

33 100 Ft. 8164 Belden

4 PR/24, 300V, type 8164, tinned copper, twisted pairs, ind.

shielded, 0.388 O.D., inst. cable

34 50 Ft. 9388 Belden

4 PR/18, 300V, type 9388, tinned copper, twisted pairs, ind.

shielded, 0.461 O.D., inst. cable

35 1 Ea.

SBBTH3040-

ChipQ uick

Breadboard, general purpose plated through hole (PTH) pad per hole (round) 0.100" (2.54mm)

36 2 Ea. ST 2

Cooper Crouse -Hinds

Conduit Hub, Die Cast Zinc, 3/4", Threaded for Rigid & IMC, Insulated Throat

37 1 Ea. C0050E5E Eaton

50 VA, 1-Phase, 200/220/440, 208/230/460, 240/480 Primary Volts - 23/110, 24/115, 25/120 Secondary Volts, MTE Industrial Control Transformer, 55 Degree C, Copper Magnet Wire, 50/60

Hz operation.

Includes: Fuse Clips on the Secondary Side for 13/32 x 1-1/2" Fuses.

38 2 Ea. C0250E2A Eaton

250 VA, 1-Phase, 240 X 480, 230 X 460, 220 X 440V Primary Volts

- 120/115/110V Secondary Volts. MTE Series Industrial Control Transformer, 55 Degree C, Copper Magnet Wire, 50/60 Hz operation.

Includes: Secondary Fuse Clips.

39 2 Ea. EZB2036RBS Eaton

EZ Box Panelboard Can. Galvanized Steel.

H x W x D: 36" x 20" x 5.75". Not compatible with LT Trim

40 2 Ea. EZT2036S Eaton

Surface Mount EZ Trim. Gray Painted Steel Trim. H x W:

36" x 20".

41 2 Ea. FAZ-C1/3-NA Eaton

1 Amp, 3-Pole, FAZ Series Din Rail Mount Circuit Breaker, 277/480V AC, 48V

DC, 10 kAIC. C Curve, 5 - 10X In Current Rating. UL 489.

42 1 Ea. FAZ-C2/2-NA Eaton

2 Amp, 2-Pole, FAZ Series Din Rail Mount Circuit Breaker, 277/480V AC, 48V

DC, 10 kAIC. C Curve, 5 - 10X In

43 2 Ea.

FAZ-D1/2-

NA Eaton

1 Amp, 2-Pole, FAZ Series Din Rail Mount Circuit Breaker, 277/480V AC, 48V

DC, 10 kAIC. D Curve, 10 - 20X In

44 4 Ea.

FAZ-D10/3-

NA Eaton

10 Amp, 3-Pole, FAZ Series Din Rail Mount Circuit Breaker, 277/480V AC, 48V

DC, 10 kAIC. D Curve, 10 - 20X In

45 2 Ea. GBK10 Eaton

Ground Bar Kit, 10 Terminal, Length:

4.26 inches (109.0 mm). Used with BR and CH Series Loadcenters

46 3 Ea. GHB3020 Eaton

Molded case circuit breaker, G-frame, GHB, Complete breaker, Fixed thermal, Fixed magnetic trip type, Three-pole, 20 A, 480Y/277 Vac, 125/250 Vdc, 50/60 Hz

47 3 Ea. GHB3030 Eaton

Molded case circuit breaker, G-frame, GHB, Complete breaker, Fixed thermal, Fixed magnetic trip type, Three-pole, 30 A, 480Y/277 Vac, 48 2 Ea. GHB3040 Eaton

Eaton Series C complete molded case circuit breaker, G-frame, GHB, Complete breaker, Fixed thermal, Fixed magnetic trip type, Three-pole, 40 A, 480Y/277 Vac, 49 2 Ea. GHB3050 Eaton

Eaton Series C complete molded case circuit breaker, G-frame, GHB, Complete breaker, Fixed thermal, Fixed magnetic trip type, Three-pole, 50 A, 480Y/277 Vac, 50 2 Ea. GHB3060 Eaton

Eaton Series C complete molded case circuit breaker, G-frame, GHB, Complete breaker, Fixed thermal, Fixed magnetic trip type, Three-pole, 60 A, 480Y/277 Vac, 51 2 Ea. LUGKIT100 Eaton

Main Lug Kit. 100 Amp Standard Mechanical Lug Assembly. Wire Range AL/CU (1) #14–1/0 For use with PRL1A and PRL2A Panelboards. Includes:

(3) Lugs, (1) Filler Cover, (6) 10-32 x 7/8" Screws and (2) 10-32 x 3/8" Screws.

Can be used as Main or Feed-Through distribution

52 2 Ea.

PRL2A3100X

18C Eaton

Panelboard Interior, 100 Amp, 480Y/277V AC, 4-Wire, 3-Phase, 14 kAIC, 18-Space, 18-Circuits, Copper Bus, Breaker Type:

GHB. Main Breaker/Lug Provision on the Top of the Interior, Feed-Through Provision on Bottom of Interior.

53 7 Ea. 017322005 Entrele c

DIN Rail, Symmetrical, Slotted.

DIN 3. Type: PR30 (TS 35/F6). Material:

White Passivated Galvanized Steel.

Length: 2 Meters. H x W: 7.5mm x 35mm.

54 14 Ea. 0195 638.23 Entrele c

Ground Terminal Block Electically Connected to Mounting Rail.

Compression Clamp.

Type: M 4/6A.P.V0.

Color: UL 94 V0 Green/Yellow. Size: 4 mm Block, 6 mm Spacing. DIN 1 - DIN

3. Wire Size: 22 - 10

AWG.

55 100 Ea.

1SNK 506

010 R0000

Entrele c

Feed Through Terminal Block.

Screw Clamp. Type:

ZS6. Color: Gray.

600V/30A. Size: 6 mm² Block, 6 mm Spacing. DIN 1 - DIN

3. Wire Size: 24 - 10

AWG.

56 40 Ea.

1SNK 900

001 R0000

Entrele c

End Stop. Type:

BAM4. Color: Gray.

Thickness: 9.9 mm.

Mounts on DIN TH35-

7.5 & DIN TH35-15.

57 1 Ea.

1SNK 906

305 R0000

Entrele c

Assembled Jumper Bar with IP Protection, 5 Pole, 30 Amp, Type:

JB6-5, Color: Orange

58 10 Ea.

1SNK906302

R0000

Entrele c

Assembled Jumper Bar. 2 Pole. 41 Amp.

Type: JB6-2. Color:

Orange. Used with 6 mm Blocks.

59 4 Pkg. T30R9C2 Heller man

Cable Tie, Standard, Locking Natural 1.38" (35.00mm) 0.138" (3.50mm) 30 lbs (13.61 kg) 100 pack

60 1 Ea. PF19R13K6 Hubbel l

Powerflex 750 series, ac drive, 19 ohm, 13164W, 45.9lbs., external DB resistor

61 1 Ea. AU-0 ILSCO

Aluminum Mechanical Lug, Conductor Range 1/0-14, 2 Ports, 1 Hole, 1/4in Bolt Size, Tin Plated, UL, CSA

62 4 Ea. 221

Keysto ne Electro nics

Aluminum, 1/2" length, Hexagon shape, 6-32 threads, circuit board stand-offs

63 1 Ea. FLQ002 Littlefu se

2 Amp Fuse, Midget, Time Delay, Brand or Series: Slo-Blo, Type:

Cartridge, Voltage Rating: 500 VAC, Interrupting Rating:

10000 Amp RMS Symmetrical, Dimensions: 13/32 Diameter x 1 1/2 Length Inch.

64 2 Ea. FLM.600 Littlefu se

.6 Amp Slo-Blo FLM Series Midget Fuse.

Cartridge Type, 250 Volt. Interrupting Rating: 10,000 Amperes at 250 VAC.

Dimensions: 13/32” Diameter x 1 1/2” Length

65 4 Ea.

KLDR001.TX

P

Littlefu se

1 Amp Fuse, Time Delay, Brand or Series: KLDR, Interrupting Rating:

200000 Amp AC RMS Symmetrical, 20000 Amp DC, Terminal Type: Cartridge, Rejection, Dimensions: 13/32 Diameter x 1 1/2 Length Inch, Voltage Rating: 600 VAC/300

VDC

66 4 Ea. LPSC001 Littlefu se

1 Amp Fuse, Time Delay, Brand or Series: KLDR, Interrupting Rating:

200000 Amp AC RMS Symmetrical, 20000 Amp DC, Terminal Type: Cartridge, Rejection, Dimensions: 13/32 Diameter x 1 1/2 Length Inch, Voltage Rating: 600 VAC/300

VDC

67 500 Ft.

10PV1000VB

LAX500

Multipl e

10 AWG,

USE/RHH/RHW, 7-

Strand Copper Conductor, Photovoltaic Wire, 1000/2000V, Temp Rating: -40°C to 105°C Dry and 90°C Wet, Sunlight Resistant, Direct Burial, Color: Black

68 10 Ft. 112E Multipl e

1-1/2 Inch EMT Conduit, Steel, 10 Foot Length

69 2 Ea. 112ES1H Multipl e

1-1/2" Strap, 1-Hole, Material: Zinc Plated Steel. For use with:

EMT.

70 2 Ea. 112ESSSCN Multipl e

EMT Set Screw Connector, 1 1/2 inch, Material: Steel

71 2 Ea. 112LTICN Multipl e

Liquidtight Connector, 1-1/2"

72 50 Ft. 112LTULX50 Multipl e

Liquidtight, Type:

UA, 1-1/2", Gray, 50' Coil

73 20 Ft. 112R Multipl e

Rigid Conduit, 1-1/2", Galvanized Steel, 10'

74 3000 Ft.

12SISGRAX1

Multipl e

12 AWG, Switchboard Cable, Jacket:

Polyethylene, 600V, Stranded Tinned Copper Conductor, Gray, 75 500 Ft.

16MTWSTR

GRAX500

Multipl e

16 AWG, MTW, 30-

Strand, Copper Wire, Gray, 600V, Machine Tool Wire, 500' Spool.

76 2 Ea. 1DCIGBU Multipl e

4", zinc die cast, insulated, RMC ground bushing

77 12 Ea. 23RNP Multipl e

2", RMC close nipple, galvanized steel, 3" length

78 14 Ea. 2LN Multipl e

Locknut, 2", Zinc Plated Steel

79 10 Ft. 34E Multipl e

3/4 Inch EMT Conduit, Steel, 10 Foot Length

80 2 Ea. 34ESSSCN Multipl e

EMT Set Screw Connector, 3/4 inch, Material: Steel

81 200 Ft. 34LTULX100 Multipl e

3/4 Inch Diameter, Liquidtight, Metallic, UL Listed, UA, Zinc- Coated Steel Core, Color: Gray.

82 2 Ea. 45RNP Multipl e

4" Rigid Conduit Nipple, Length: 5", Material: Galvanized Steel.

83 4 Ea. 4LN Multipl e

Locknut, Size: 4".

Material: Zinc Plated Steel.

84 500 Ft.

4THHNCSTR

BLAX

Multipl e

4 AWG,

THHN/THWN-2,

Stranded Copper, 600V, Black

85 1500 Ft.

6THHNCSTR

BLAX

Multipl e

6 AWG,

THHN/THWN-2,

Stranded Copper, 600V, Black, 86 100 Ft. E1032S.30.10 Multipl e

2C/18, 300V, type CMR/CL3R, stranded, bare copper, unshielded, 0.142" O.D., gray, signal cable

87 10 Ea. UD-80A nVent Eriflex

Distribution Block, Single Primary/Multiple Secondary, 1-Pole, Line Side: (1) 16 AWG - 4 AWG, Load Side: (4) 16 AWG - 4 AWG, 600V, 85 Amps per Pole, IP20, DIN Rail Mount.

88 2 Ea. A161410CH nVent/ Hoffm an

Junction Box, NEMA 12, Hinged Cover, 16 x 14 x 10 Inch, Steel/Gray

89 1 Ea. A161606LP nVent/ Hoffm an

Junction Box, NEMA 12/13, 16" x 16" x 6"

90 2 Ea. A16P14 nVent/ Hoffm an

Panel for Junction Box Size: 16" x 14", Size/Dims:

14.75x12.88, Material/Finish:

Steel/White

91 1 Ea. A202010LP nVent/ Hoffm an

Wall-Mount, Type 12/13, Enclosure, Size/Dims: 20" x 20" x 10", Material/Finish:

Steel/Gray, hinged cover

92 1 Ea. A20P20 nVent/ Hoffm an

Panel For Enclosure, 20" x 20", Type 3R, 4, 4X, 12/13, Steel, White Powder Coat Finish

93 1 Ea. A8066CH nVent/ Hoffm an

Junction Box, NEMA 12, Hinged Cover, 8" x 6" x 6"

94 1 Ea. A808CH nVent/ Hoffm an

Junction Box, NEMA 12, Hinged Cover, 8 x 8 x 4 Inch, Steel/Gray

95 1 Ea. A8P6 nVent/ Hoffm an

Panel For Junction Box, 8" x 6", Steel/White Powder Coat Finish

96 1 Ea. A8P8 nVent/ Hoffm an

Panel for Junction Box Size: 8" x 8", Size/Dims: 6.75x6.88, Material/Finish:

Steel/White

97 1 Ea. E1PB nVent/ Hoffm an

Enclosure, Pilot Device, 30 mm, 1

Hole, Steel, Type 12/13

98 4 Ea. F66GCPNK nVent/ Hoffm an

NEMA 1, wireway end cap, 6" x 6", type 1, 16 gauge steel, gray, no k.o.'s

99 2 Ea. F66T124GVP nVent/ Hoffm an

NEMA 1, straight section, wireway, type 1, screw cover, 6" x 6" x 24", 16 gauge steel, gray, no k.o.'s

100 1 Ea.

OSTYK42108

On Shore Techno logy Inc.

8-point, 8.25mm terminal pitch, 2.64" x 0.05" x 0.5", Barrier Terminal Block

101 1 Pkg. PLT1M-C Panduit

Cable Tie, Standard, Locking, Natural 0.87" (22.10mm) 0.098" (2.50mm) 18 lbs (8.16 kg)

102 6 Ea. IISRB1/0 Penn- Union

Multi-Tap Connector, 2 Port, In Line, 14

AWG - 1/0 AWG,

AL/CU, Black, Dual Rated, 600V, 90°C, UV Rated, Chemical Resistant, Hex Size:

3/16

103 6 Ea. SEL4 Penn- Union

Split Bolt Connector, Copper Alloy, Conductor Range: 8

AWG - 4 AWG,

Conductor Diameter:

0.128" - .204".

104 12 Ea. 1826995

Phoeni x Contac t

4 Position Terminal Block Plug, Female Sockets 0.150" (3.81mm) 270° Free Hanging (In-Line)

105 200 Ea. 3240702

Phoeni x Contac t dual opening cable tie holder transparent, screw, 0.59" L x 0.37" W x 0.28" H, fits cable ties up to 0.197"

106 8 Ea.

PLC-RPT-

24DC/21-22

Phoeni x

2-SPDT w/ 250vac/dc contacts, 24VDC (18mA) coil, DIN

Contac t mount, plug-in, control relay w/ base

107 2 Ea.

RIF-2-RPT-

LDP-

24DC/4X21

Phoeni x Contac t

General Purpose Relay, RIF-2 Series, Interface, Non Latching, 4PDT, 24 VDC, 6 A RoHS Compliant

108 1 Ea.

1606-

XLS120E

Rockw ell

100-240VAC input, 24VDC output, 10A output, DIN railail mount, 2.36"x4.88"x4.61", power supply

109 1 Ea. 20-750-APS Rockw ell

Powerflex 750 series, ac drive, 24VDC, auxiliary power supply

110 4 Ea. 300-AOEJ930 Rockw ell

Contactor, AC, Size 0, 18 Amp, 600 Volt AC, 3 - 5 Horse Power, 24 Volt DC Coil, Open Type, No Enclosure

111 1 Ea. H4P33KFZA

TE

Connec tivity Passive Produc t

33k ohm, 1% tolerance, 1W, through hole, 0.394" length, metal film, axial lead, resistor

112 100 Ft. 60031LC Trex- Onics

4C/8, 55A, 1000V, w/ 4C/16 brake cond., type TC-ER, tinned copper, 1.07" O.D., yel., VFD cable

113 5 Ea.

MBE04140C1

002FC100

Vishay Beysch lag/Dra loric/B C Compo nents

10k ohm, 1% tolerance, 1W, through hole, 0.469" length, metal film, axial lead, resistor

114 2 Ea.

2493-01-30-1-

AAA-1-1

Welsch er

3-phase, 600V L-L nom. input, 5A nom.

Input, 45-66HZ, 100- 240AC/DC pwr input, 4.33" x 4.33" x 5.92", didgital Panel meter.

115 2 Ea. 5560 Woodh ead

1", non-metallic, cord range: 0.875"-1", compression connector

116 1 Ea.

1SVR730824

R9300 ABB

Voltage Monitor. 3- Phase, 200-500V AC, SPDT, DIN Rail Mount. Functional Protection: Loss of any Phase, Phase Unbalance.

117 Freight $ $

GRAND TOTAL

This is a Brand Name or Equal requirement. If offering an equal product, quoter must clearly identify the brand name and model number along with descriptive literature that demonstrates how the proposed product meet or exceed the required salient characteristics. Contractor must propose brand new product, refurbished product will not be accepted.

Contractor must quote all the line items and a partial quote will not be accepted.

QUOTE VALID DATE

Quotes/quote shall be valid for 60 days from the quote due date.

Authorized Agent’s Signature/Date: _________________________________________ Please see further instructions for quote submission under Addendum to Provision 52.212-1 starting on page 37 of this document.

Documents necessary for quote submission are as follows:

1. Completed and signed Page 3 of this document (Offeror Information and Pricing schedule).

2. Completed provision 52.212-3, Offeror’s Representations and Certifications NOTE:

The offeror shall complete only paragraphs (b) of this provision if the Offeror has not completed the annual representations and certification electronically via System for Award Management (SAM).

3. Technical Specifications of the product being offered. Contractor shall provide all necessary documentation that demonstrates adherence to each of the salient characteristics listed in the specifications document.

SPECIFICATIONS

Salient Characteristics

NCAO Keswick Gantry Crane Controls Upgrade July 2023

1.0 BACKGROUND AND SCOPE

The Northern California Area Office (NCAO) has a requirement to upgrade the controls of the 70-year-old Keswick Dam Gantry Crane. The contractor shall furnish to the Government all supply products according to Salient Characteristics as described in section 2.0. The Government is requesting a total of 116 electrical items or equivalent.

2.0 DELIVERABLES

This requirement is a Brand-Name or Equal purchase with the proposed vendor being required to provide either the brand-name item or equal item that meets the salient characteristics of the brand-name item. Equal product shall meet or exceed the salient characteristics.

3.0 INSPECTION, REJECTION AND WARRANTY OF EQUIPMENT

The electrical supplies must be free of physical and latent defects. Upon receipt of the supplies the Government will inspect and has the right to reject the equipment based on damage or workmanship.

4.0 TYPE OF CONTRACT

This requirement will be awarded as firm-fixed price type purchase order.

5.0 DELIVERY

The contractor shall protect all parts from corrosion, deformation, and other types of damage during storage, handling, and delivery. Damage to the product or its components during transit shall be replaced at the contractor’s expense.

Shipping Terms: F.O.B. Destination

The items shall be delivered within 120 days after receipt of order (ARO) to the address below:

US Bureau of Reclamation Shasta Dam Northern California Area Office Attention: Roger Rockstad

SOLICITATION CLAUSES AND PROVISIONS

COMMERCIAL CLAUSES

52.252-2 CLAUSES INCORPORATED BY REFERENCE - (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): FAR Clauses – https://www.acquisition.gov/far/

The clauses in the table below are incorporated by reference.

CLAUSE TITLE DATE

52.212-4 CONTRACT TERMS AND CONDITIONS –COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

DEC 2022

52.247-34 F.O.B. DESTINATION NOV 1991

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE OCT 2018

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS

SUBCONTRACTORS

MAR 2023

(End of Clause)

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE

(AUG 2020)

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity by unique location; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

(b) Contractors shall ensure that the CAGE code is maintained throughout the life of the contract for each location of contract, including subcontract, performance. For contractors registered in the System for Award Management (SAM), the DLA Commercial and Government Entity (CAGE) Branch shall only modify data received from SAM in the CAGE master file if the contractor initiates those changes via update of its SAM registration. Contractors undergoing a novation or change-of-name agreement shall notify the contracting officer in accordance with https://www.acquisition.gov/far/ subpart 42.12. The contractor shall communicate any change to the CAGE code to the contracting officer within 30 days after the change, so that a modification can be issued to update the CAGE code on the contract.

(c) Contractors located in the United States or its outlying areas that are not registered in SAM shall submit written change requests to the DLA Commercial and Government Entity (CAGE) Branch. Requests for changes shall be provided at https://cage.dla.mil. Change requests to the CAGE master file are accepted from the entity identified by the code.

(d) Contractors located outside the United States and its outlying areas that are not registered in SAM shall contact the appropriate National Codification Bureau (points of contact available at http://www.nato.int/structur/AC/135/main/links/contacts.htm) or NSPA at https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx to request CAGE changes.

(e) Additional guidance for maintaining CAGE codes is available at https://cage.dla.mil.

(f) If the contract includes Federal Acquisition Regulation clause 52.204-2, Security Requirements, the contractor shall ensure that subcontractors maintain their CAGE code(s) throughout the life of the contract.

(End of clause)

WBR 1452.237-80 SECURITY REQUIREMENTS -- BUREAU OF RECLAMATION (MAR 2022)

(a) General Security Requirements:

(1) This clause addresses security requirements, including general procedural requirements, information security requirements, contractor employee suitability requirements, identification card requirements, site security requirements, vessel exclusion barriers, and information technology security requirements. Within this clause, COR means Contracting Officer's Representative. If there is no COR appointed and identified to the Contractor, the term instead will mean the Program Manager or any other authorized individual responsible for technical oversight under the contract. “Work site” means the Government facility, office, construction site, and any other area within the Government office or facility that the Contractor must access to accomplish work under this contract.

(2) The work performed under this contract shall only be accomplished by individuals (in the employment of the Contractor or any subcontractors) whose conduct and behavior is consistent with the efficiency of the Federal Service and the requirements of this contract, and who are acceptable to the contracting officer. If Reclamation finds a Contractor employee to be unsuitable or unfit for his or her assigned duties, the contracting officer will direct the Contractor to remove the individual from the contract and access to the Federal facility at which the contract activities are occurring.

(3) The Contractor’s employees governed by this contract may need access to sensitive information and/or sensitive areas. The Federal Government (Government) reserves the right, in its sole discretion, to determine suitability of Contractor personnel and deny access to any sensitive information or project specific area to any personnel for any cause.

(4) The Contractor is responsible for informing and ensuring compliance by its employees with any applicable security procedures of the Government facility where work may be performed under this contract.

(5) Any Contractor employee that will have access to a Federally-controlled facility or information system will be required to have a Government-issued identification card, consisting of a Personal Identity Verification (PIV) Card, a temporary identification card, or a visitor badge.

(Note: within the Department of the Interior this card is known as a DOI Access Card.) During performance of the contract, the Contractor shall keep the COR apprised of any changes in personnel, or changes in personnel access or duration, to ensure that performance is not delayed by compliance with credentialing processes.

(6) A Contractor employee will not be provided access to a Government facility or information system until a Government PIV Card, temporary identification card, or visitor identification badge has been issued to the Contractor employee. For those individuals that will be receiving a PIV Card, the Government may, at its discretion, issue a temporary identification card or visitor identification badge after the electronic background investigation forms have been received and the investigation is initiated.

(7) All Contractor employees shall access the facility via the facility’s entry screening system and visibly display the Government-issued PIV Card, temporary identification card, or visitor identification badge at all times. Contractor employees must visibly wear the Government-issued identification card at all times they are on Government facilities. Contractor employees are responsible for the safekeeping of all Government-issued identification cards, whether on-site or off-site. Cards that have been lost, damaged, or stolen must be reported to the COR and DOI Access Sponsor immediately, but not later than within 24 hours. The Contractor shall return all identification cards and card keys and any other Government property and information upon completion of performance or when personnel depart permanently or for a period of 7 days or more. The Contractor may be required to turn in access control cards or identification cards on a daily basis.

(8) Misuse or loss of access control or identification cards, or failure to comply with required surrender of such cards may, at Government discretion, result in Contractor personnel being denied access to the work site, at no cost to Government. The Contractor may be charged up to

$500 for each occurrence for any required replacement of Government- issued access control or identification cards due to loss or misuse. At the end of contract performance, or when a Contractor employee is no longer working under this contract, the Contractor shall ensure that all access control and identification cards are returned to the COR.

(9) All Contractor personnel, including subcontractor personnel, with access to the work site shall be U.S. citizens or foreign individuals legally residing in, or legally admitted to, the U.S.

For all non-U.S. citizens working under this contract, irrespective of length of time working on the contract, the Contractor shall provide to the COR, legible and valid copies of the individual’s passport and visa (unless individual is on the Visa Waiver Program) a minimum of 14 calendar days prior to beginning work or arriving at the facility. A driver’s license is not acceptable identification. In addition, a completed form I-94 shall be submitted to the COR upon the individual’s arrival at the work facility and prior to beginning work.

(10) The Contractor shall report all contacts with entities, individuals, and ounsel/representatives (including foreign entities and foreign nationals) who seek in any way to obtain unauthorized access to sensitive information or areas. The Contractor shall report any violations of contract provisions, laws, executive orders, regulations, and guidance to the contracting officer. The Contractor shall report any information raising a doubt as to whether an individual’s eligibility for continued employment or access to sensitive information is consistent with the interests of National Security and the Public Trust.

(11) Unsanctioned, negligent, or willful inappropriate action on the part of the Contractor (or its employees) may result in termination of the contract or removal of some Contractor employees from Reclamation facilities at no cost to the Government. These actions include, but are not limited to, exploration of a sensitive system and/or information, introduction of unauthorized and/or malicious software, inappropriate release of sensitive information, or failure to follow prescribed access control policies and/or security procedures. Failure to comply with Reclamation policies, procedures, or other published security requirements may result in termination of the contract or removal of some contracted employees from Reclamation buildings and/or facilities at no cost to the Government.

(12) All provisions of this clause shall equally apply to all subcontractors. The Contractor shall incorporate the substance of this clause in all subcontracts.

(13) These security requirements apply to all sections of this Contract including Contract Drawings and other Contract Specifications as applicable. Related documents include other general provisions of Construction or Operations and Maintenance type Contracts, including FAR clauses by reference or as amended by related documents.

(b) Information Security Requirements.

(1) Sensitive Information. The term “sensitive information” means any information which warrants a degree of protection and administrative control as defined by Reclamation or that meets the criteria for exemption from public disclosure set forth under Sections 552 and 552a of Title 5, United States Code: the Freedom of Information Act and the Privacy Act. Sensitive information is generally categorized as CONTROLLED UNCLASSIFIED INFORMATION (CUI), but in some cases may include other unclassified information. (The protection of National Security information is beyond the scope of this clause. If any work on National Security information is required under this contract, it is addressed under other contract clauses.) The Contractor shall protect this type of information from unauthorized release into public domain, or to unauthorized persons, organizations, or subcontractors. Information which, either alone or in aggregate, is deemed sensitive by Reclamation shall be handled and protected in accordance with Reclamation Directives and Standards SLE 02-01 Identifying and Safeguarding Controlled Unclassified Information (CUI), which is available from the COR or at http://www.usbr.gov/recman/DandS.html#sle.

(i) Any Government-furnished information or material does not become the property of the Contractor and may be withdrawn at any time. Upon expiration or termination of the contract, all documents released to the Contractor and any material created using data from such documents shall be returned to the COR for final disposition. Government-furnished information residing on any electronic systems (laptops, servers, desktops, media) shall be deleted from those systems using a COR-approved data erasure solution. Only with prior authorization from the contracting officer may the Contractor retain the material. The Contractor or subcontractor shall not disclose or release the materials provided to the Contractor to any individuals of the Contractor's organization not directly engaged in providing services under the contract or that do not have a valid need-to-know. All technical data provided to the Contractor by the Government shall be protected from public or private disclosure in accordance with the markings printed on them. All other information relating to the items to be delivered or the services to be performed under this contract shall not be disclosed by any means without prior approval of the contracting officer.

Prohibited dissemination or disclosure includes, but is not limited to: permitting access to such information by foreign nationals or by immigrant aliens who may be employed by the Contractor, publication of technical or scientific papers, advertising, disclosure to Contractor staff not investigated and deemed acceptable at the appropriate information sensitivity level, and any other public release. The Contractor shall maintain, and furnish upon request of the contracting officer, records of the names of individuals who have access to sensitive material in its custody and the sensitive material to which the individuals had access. All questions regarding information security, access, and control shall be referred to the COR.

(ii) The Contractor shall not release to anyone outside the Contractor’s organization any sensitive, or otherwise protected information, regardless of medium in which it is contained (for example, film, tape, document, electronic), pertaining to any part of this contract or any

Reclamation program or activity, unless the contracting officer has given prior written approval.

This includes, but is not limited to, news releases, marketing promotions, articles, interviews, reports, social media posts, and any other media releases. Requests for approval shall identify the specific information to be released, the medium to be used, the purpose for the release, and a description of the need-to-know. The Contractor shall submit its request to the contracting officer ten business days before the proposed date for release. Subcontractors shall submit requests for authorization to release through the prime Contractor to the contracting officer.

(iii) The Contractor shall notify the COR immediately when known or suspected loss/compromise of sensitive information or other documents, notes, drawings, sketches, reports, photographs, exposed film or similar information which may affect the security interests of Government has occurred. This requirement extends to employees and other personnel working on behalf of the Contractor, and expands responsibility to include prompt reporting of security issues, including observed or subsequently discovered efforts by unauthorized persons to gain unauthorized access to sensitive information.

(2) Classified Information.

(i) The disclosure of U.S. Government documents by third parties can result in damage to our national security. While this contract may not deal directly with classified information, each contractor is obligated to protect classified information pursuant to all applicable laws and to use Government information technology systems in accordance with agency procedures so that the integrity of such systems is not compromised.

(ii) Unauthorized disclosures of classified documents (whether in print, on a blog, or on websites, or other electronic or non-electronic media) do not alter the documents' classified status or automatically result in declassification of the documents. To the contrary, classified information, whether or not already posted on public websites or disclosed to the media, remains classified, and must be treated as such by Federal employees and contractors, until it is declassified by an appropriate U.S. Government authority. Executive Order 13526, Classified National Security Information (December 29, 2009), Section 1.1.(c) states, "Classified Information shall not be declassified automatically as a result of any unauthorized disclosure of identical or similar information." Although the Department has taken steps to prevent access to publicly disclosed classified materials from Departmental computers, it is important to understand our continuing duties and responsibilities in this regard.

(iii) Contractors (which include all employees of the contractor, as well as subcontractors and its employees performing work for the contractor) are reminded of the following obligations with respect to the treatment of classified information and the use of unclassified government information technology systems:

(iv) The contractor shall not, while using unclassified Government computers or other devices (such as phones or tablets) access documents that are marked classified (including classified documents made publicly available by a third party), as doing so risks that material still classified will be placed onto unclassified systems. This requirement does not restrict contractor access to unclassified, publicly available news reports (and other unclassified material) that may in turn discuss classified material, as distinguished from access to underlying documents that themselves are marked classified (including if the underlying classified documents are available on public web sites or otherwise in the public domain).

(v) For contracts that require access to classified information, the contractor is responsible for obtaining the required national security clearance through the Department of the Defense National Industrial Security Program Operating Manual (NISPOM). Any classified contracts will be coordinated through the Reclamation Chief Security Officer, or for IT requirements, the Bureau Chief Information Security Officer. No contractor shall access classified information unless proper clearances have been obtained and transmitted to Reclamation. For further information, refer to 443 DM 1 or DOD NISPOM 5220.22-M dated February 28, 2006 (incorporating change 2 dated May 18, 2016).

(vi) Classified information shall not be removed from official premises.

(vii) Classified information shall not be disclosed without proper authorization.

(c) Reserved

(d) Reserved

(e) Reserved

(f) Reserved

52.212-5 CONTRACT TERMS AND CONDITIONS--COMMERCIAL PRODUCTS

AND COMMERCIAL SERVICES (JUN 2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Nov 2021) (Section 1634 of Pub. L.

115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

[ ] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C.

3509)).

[ ] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[X ] (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

[ ] (5) [Reserved].

[ ] (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

[ ] (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[X] (8) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

[X ] (9) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C. 6101 note).

[ ] (10) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

[ ] (11) [Reserved].

[ ] (12) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C.

657a).

[ ] (13) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[ ] (14) [Reserved]

[X] (15) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644). [ ]

(ii) Alternate I (Mar 2020) of 52.219-6.

[ ] (16) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644). [ ]

(ii) Alternate I (Mar 2020) of 52.219-7.

[ ] (17) 52.219-8, Utilization of Small Business Concerns (Oct 2022) (15 U.S.C. 637(d)(2) and (3)).

[ ] (18) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2022) (15 U.S.C. 637(d)(4)).

[ ] (ii) Alternate I (Nov 2016) of 52.219-9.

[ ] (iii) Alternate II (Nov 2016) of 52.219-9.

[ ] (iv) Alternate III (Jun 2020) of 52.219-9.

[ ] (v) Alternate IV (Sep 2021) of 52.219-9

[ ] (19) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

[ ] (ii) Alternate I (Mar 2020) of 52.219-13.

[ ] (20) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 637(a)(14)).

[ ] (21) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C.

637(d)(4)(F)(i)).

[ ] (22) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Oct 2022) (15 U.S.C. 657f).

[X] (23) (i) 52.219-28, Post Award Small Business Program Representation (Mar 2023) (15 U.S.C. 632(a)(2)).

[ ] (ii) Alternate I (MAR 2020) of 52.219-28.

[ ] (24) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

[ ] (25) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

[ ] (26) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

[ ] (27) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15U.S.C. 637(a)(17)).

[X] (28) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

[X ] (29) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Dec 2022) (E.O.13126).

[X] (30) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

[X] (31) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

[ ] (ii) Alternate I (Feb 1999) of 52.222-26.

[ ] (32) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (ii) Alternate I (Jul 2014) of 52.222-35.

[X] (33) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C.

793).

[ ] (ii) Alternate I (Jul 2014) of 52.222-36.

[ ] (34) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (35) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

[X] (36) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

[ ] (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[ ] (37) 52.222-54, Employment Eligibility Verification (May 2022). (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in 22.1803.)

[ ] (38) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off- the-shelf items.)

[ ] (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (39) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

[ ] (40) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

[ ] (41) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

[ ] (ii) Alternate I (Oct 2015) of 52.223-13.

[ ] (42) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514). [ ] (ii) Alternate I (Jun 2014) of 52.223-14.

[ ] (43) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) (42 U.S.C.

8259b).

[ ] (44) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

[ ] (ii) Alternate I (Jun 2014) of 52.223-16.

[X] (45) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513).

[ ] (46) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

[ ] (47) 52.223-21, Foams (Jun 2016) (E.O. 13693).

[ ] (48) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a). [ ] (ii) Alternate I (Jan 2017) of 52.224-3.

[ ] (49) (i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

[ ] (50) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (Dec 2022) (19 U.S.C. 3301note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C.

chapter 29 (sections 4501-4732), Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[ ] (ii) Alternate I [Reserved].

[ ] (iii) Alternate II (Dec 2022) of 52.225-3.

[ ] (iv) Alternate III (Jan 2021) of 52.225-3.

[ ] (v) Alternate IV (Oct 2022) of 52.225-3.

[ ] (51) 52.225-5, Trade Agreements (Dec 2022) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[X] (52) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[ ] (53) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10

U.S.C. Subtitle A, Part V, Subpart G Note).

[ ] (54) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

[ ] (55) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

[ ] (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

[ ] (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[ ] (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[X] (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018) (31 U.S.C. 3332).

[ ] (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

[ ] (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[ ] (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[ ] (63) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

[ ] (64) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631).

[ ] (ii) Alternate I (Apr 2003) of 52.247-64.

[ ] (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

[ ] (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

[ ] (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

[ ] (4) 52.222-44, Fair Labor…