C04j_Attachment 10 Wage Determination.pdf

PDF 36 KB Posted

Attached to
GMF(FL) Pasture Fence Replacement Federal contract opportunity
Solicitation number
12445526Q0079
Issued by
Department of Agriculture Forest Service

About this file

This is a Davis-Bacon wage determination for residential construction projects in New York State, issued as General Decision Number NY20260077 with an effective date of May 18, 2026 (Modification 1).

The determination applies to residential construction consisting of single-family homes and apartments up to and including 4 stories in six New York counties: Cattaraugus, Genesee, Schuyler, Seneca, Steuben, and Wyoming. The document establishes prevailing wage rates and fringe benefits for 19 construction trades and labor classifications, including plumbers ($27.44/hour base rate for non-HVAC work, $20.91/hour for HVAC installation), carpenters (ranging from $16.35 to $23.14/hour depending on work type), electricians ($17.08/hour), cement masons ($22.60/hour), roofers ($16.64/hour), and various equipment operators ($21.72-$27.74/hour). Fringe benefits vary by classification, ranging from $0 to $23.40/hour. The determination includes provisions for Executive Order 13706 requiring contractors to provide 1 hour of paid sick leave per 30 hours worked (up to 56 hours annually) and Executive Order 13658 establishing a federal minimum wage of $13.65/hour (where applicable) for covered contracts. Unlisted classifications may be added after contract award through the established labor standards contract clauses. The document provides detailed guidance on rate identifiers, union prevailing wage updates, survey rates, and state-adopted rates, along with procedures for wage determination appeals directed to the Department of Labor's Wage and Hour Division and Branch of Construction Wage Determinations.

View the file

Other files for this federal contract opportunity

Other files attached to GMF(FL) Pasture Fence Replacement, newest first.
File Type Posted
C04_SAM Solicitation 12445526Q0079.pdf PDF
C04i_Attachment 9 Butcher Hill CT.pdf PDF
C04b_Attachment 2 FL Fence Diagrams.pdf PDF
C04a_Attachment 1 Statement of Work.pdf PDF
C04e_Attachment 5 Bumpus Pasture CT.pdf PDF
C04g_Attachment 7 North Wilkens CT.pdf PDF
C04h_Attachment 8 South Velie CT.pdf PDF
C04c_Attachment 3 Auble Pasture CT.pdf PDF
C04d_Attachment 4 Bailey Pasture CT.pdf PDF
C04f_Attachment 6 Campell Pasture CT.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

"General Decision Number: NY20260077 05/18/2026

State: New York

Construction Types: Residential

Counties: New York Counties of Cattaraugus, Genesee, Schuyler, Seneca, Steuben and Wyoming

RESIDENTIAL CONSTRUCTION PROJECTS (consisting of single family homes and apartments up to and including 4 stories)

Modification Number Publication Date 0 01/02/2026 1 05/18/2026

PLUM0022-014 05/02/2016

Rates Fringes

PLUMBER (EXCLUDES HVAC UNIT INSTALLATION)...........$ 27.44 23.40

SUNY2013-004 03/17/2015

Rates Fringes

SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY)....$ 17.41 2.46

ROOFER..............................................$ 16.64 0.00

PLUMBER (HVAC UNIT INSTALLATION ONLY)...............$ 20.91 0.00

PAINTER (BRUSH AND ROLLER), EXCLUDES DRYWALL

FINISHING/TAPING....................................$ 18.47 0.00

OPERATOR: BULLDOZER................................$ 21.72 0.00

OPERATOR: BOBCAT/SKID STEER/SKID LOADER............$ 27.74 0.00

OPERATOR: BACKHOE/EXCAVATOR/TRACKHOE...............$ 21.73 0.00

LABORER: MASON TENDER - CEMENT/CONCRETE............$ 16.00 10.45

LABORER: COMMON OR GENERAL.........................$ 14.73 0.00

ELECTRICIAN.........................................$ 17.08 0.00

DRYWALL FINISHER/TAPER..............................$ 21.51 0.00

CEMENT MASON/CONCRETE FINISHER......................$ 22.60 5.75

CARPENTER, EXCLUDING SIDING INSTALLATION (METAL,

ALUMINUM, VINYL) AND DRYWALL HANGING AND METAL STUD

INSTALLATION........................................$ 20.89 0.00

CARPENTER (SIDING INSTALLATION ONLY - METAL,

ALUMINUM, VINYL)....................................$ 16.35 0.00

CARPENTER (DRYWALL HANGING AND METAL STUD

INSTALLATION ONLY)..................................$ 23.14 0.00

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.

Note: Executive Order 13658 generally applies to contracts subject to the Davis-Bacon Act that were awarded on or between January 1, 2015 and January 29, 2022, and that have not been renewed or extended on or after January 30, 2022. Executive Order 13658 does not apply to contracts subject only to the Davis-Bacon Related Acts regardless of when they were awarded. If a contract is subject to Executive Order 13658, the contractor must pay all covered workers at least $13.65 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract from May 11, 2026, through December 31, 2026. The applicable Executive Order minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under Executive Order 13658 is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (iii)).

The body of each wage determination lists the classifications and wage rates that have been found to be prevailing for the type(s) of construction and geographic area covered by the wage determination. The classifications are listed in alphabetical order under rate identifiers indicating whether the particular rate is a union rate (current union negotiated rate), a survey rate, a weighted union average rate, a state adopted rate, or a supplemental classification rate.

Union Rate Identifiers

A four-letter identifier beginning with characters other than �SU�, �UAVG�, �SA�, or �SC� denotes that a union rate was prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2024. PLUM is an identifier of the union whose collectively bargained rate prevailed in the survey for this classification, which in this example would be Plumbers.

0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2024 in the example, is the effective date of the most current negotiated rate.

Union prevailing wage rates are updated to reflect all changes over time that are reported to WHD in the rates in the collective bargaining agreement (CBA) governing the classification.

Union Average Rate Identifiers

The UAVG identifier indicates that no single rate prevailed for those classifications, but that 100% of the data reported for the classifications reflected union rates. EXAMPLE:

UAVG-OH-0010 01/01/2024. UAVG indicates that the rate is a weighted union average rate. OH indicates the State of Ohio.

The next number, 0010 in the example, is an internal number used in producing the wage determination. The date, 01/01/2024 in the example, indicates the date the wage determination was updated to reflect the most current union average rate.

A UAVG rate will be updated once a year, usually in January, to reflect a weighted average of the current rates in the collective bargaining agreements on which the rate is based.

Survey Rate Identifiers

The �SU� identifier indicates that either a single non-union rate prevailed (as defined in 29 CFR 1.2) for this classification in the survey or that the rate was derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As a weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SUFL2022-007 6/27/2024. SU indicates the rate is a single non-union prevailing rate or a weighted average of survey data for that classification. FL indicates the State of Florida. 2022 is the year of the survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. The date, 6/27/2024 in the example, indicates the survey completion date for the classifications and rates under that identifier.

�SU� wage rates typically remain in effect until a new survey is conducted. However, the Wage and Hour Division (WHD) has the discretion to update such rates under 29 CFR 1.6(c)(1).

State Adopted Rate Identifiers

The �SA� identifier indicates that the classifications and prevailing wage rates set by a state (or local) government were adopted under 29 C.F.R 1.3(g)-(h). Example: SAME2023-007 01/03/2024. SA reflects that the rates are state adopted. ME refers to the State of Maine. 2023 is the year during which the state completed the survey on which the listed classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination.

The date, 01/03/2024 in the example, reflects the date on which the classifications and rates under the �SA� identifier took effect under state law in the state from which the rates were adopted.

WAGE DETERMINATION APPEALS PROCESS

1) Has there been an initial decision in the matter? This can be:

a) a survey underlying a wage determination

b) an existing published wage determination

c) an initial WHD letter setting forth a position on a wage determination matter

d) an initial conformance (additional classification and rate) determination On survey related matters, initial contact, including requests for summaries of surveys, should be directed to the WHD Branch of Wage Surveys. Requests can be submitted via email to davisbaconinfo@dol.gov or by mail to:

Branch of Wage Surveys Wage and Hour Division

U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210 Regarding any other wage determination matter such as conformance decisions, requests for initial decisions should be directed to the WHD Branch of Construction Wage Determinations.

Requests can be submitted via email to BCWD-Office@dol.gov or by mail to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2) If an initial decision has been issued, then any interested party (those affected by the action) that disagrees with the decision can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).

Requests for review and reconsideration can be submitted via email to dba.reconsideration@dol.gov or by mail to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210 The request should be accompanied by a full statement of the interested party's position and any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210.

END OF GENERAL DECISION

File details come from the government source that posted it. Updated .