C04-Solicitation.GMUG.Culverts.1240LP26Q0137.pdf

PDF 1 MB Posted

Attached to
RFQ FY2026 Steel Culverts Grand Mesa, Uncompahgre, & Gunnison NF
Solicitation number
1240LP26Q0137
Issued by
Colorado

About this file

This is a Request for Quotation (RFQ) issued by the USDA Forest Service, Intermountain Region, for the Grand Mesa, Uncompahgre & Gunnison National Forest (GMUG NF) located in Delta County, Colorado. The solicitation requests metallic-coated (galvanized) spiral corrugated steel pipe (CSP) culverts in three sizes with associated hardware and delivery/offloading services. The specific items include 33 units of 18-inch x 24-foot pipe with 23 annular bands; 3 units of 24-inch x 24-foot pipe with 2 annular bands; and 3 units of 36-inch x 20-foot pipe with 2 annular bands. All culverts must conform to AASHTO M 36 and relevant standards (AASHTO M 218, M 274, or M 289) and feature 16-gauge 2 2/3 x 1/2 spiral corrugated construction. Quotations are due by August 10, 2026, at 3:00 PM Mountain Daylight Time and must be submitted via email to jane.pedrotti@usda.gov. Delivery is required within 60 days of order receipt to the North Delta Administrative Site in Delta, Colorado, with Monday through Thursday delivery windows between 8:00 AM and 4:00 PM. Contractors must contact the technical point of contact a minimum of ten working days in advance of delivery. There is no formal post-award conference or site visit requirement specified, though the Government reserves the right to request a post-award conference within 10 days of award if needed.

This is a Total Small Business Set-Aside under North American Industry Classification Standard (NAICS) code 237310 with a small business size standard of $45 million. The Government will award a firm fixed-price contract to the lowest price, technically acceptable offer, with only the lowest priced offer evaluated for technical acceptability initially. Pricing must include all shipping, handling, unloading, and equipment necessary to offload culverts at the destination point; early delivery dates may receive favorable rating for best value determination. All offerors must be registered in the System for Award Management (SAM.gov) and provide their Unique Entity Identifier (UEI) number. Vendors must submit a Buy American Certificate (FAR 52.225-2) with their quotations certifying the domestic origin of end products or identifying foreign products and their country of origin. Payment will be made electronically through the Government's Invoice Processing Platform (IPP) following receipt and acceptance of items, with itemized invoices required. A brochure or information sheet of the offered product must accompany all quotations. No incumbent contractor is identified, and the contract incorporates by reference multiple Federal Acquisition Regulation (FAR) clauses including provisions related to small business protections, anti-discrimination compliance, and cybersecurity restrictions on supplier terms.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

40LP

OGDEN UT 84401-2310

324 25TH ST

USDA-FS CSA INTERMOUNTAIN 4

CODE 16. ADMINISTERED BYCODE

X

X

X

237310

SIZE STANDARD:

100.00 % FOR:SET ASIDE:UNRESTRICTED OR40LP

REQUEST FOR

PROPOSAL

(RFP)

INVITATION

FOR BID (IFB)

10. THIS ACQUISITION ISCODE

REQUEST FOR

QUOTE (RFQ)

14. METHOD OF SOLICITATION

13b. RATING

NORTH AMERICAN INDUSTRY

CLASSIFICATION STANDARD

(NAICS):

SMALL BUSINESS

07/29/2026

JANE PEDROTTI

(No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIME

08/10/2026 1500 MD

b. TELEPHONE NUMBERa. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

1240LP26Q0137

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 8 1170266OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

Multiple Destinations

15. DELIVER TO

OGDEN UT 84401-2310

324 25TH ST

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

$45

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FREE ON BOARD

(FOB) DESTINATION UNLESS

BLOCK IS MARKED

11.

SEE SCHEDULEX

12. DISCOUNT TERMS THIS CONTRACT IS A RATED

ORDER UNDER THE DEFENSE

PRIORITIES AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

8(A)

USDA-FS CSA INTERMOUNTAIN 4

WOMEN-OWNED SMALL

BUSINESS (WOSB)

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Solicitation for Metallic-Coated Corrugated Steel Pipe Culverts - FY2026 Order for the Grand Mesa, Uncompahgre & Gunnison NF Engineering Program of various sizes listed on Schedule of Items.

VENDOR IS REQUIRED TO SIGN AND SUBMIT RESPONSES

VIA EMAIL TO JANE.PEDROTTI@USDA.GOV BY AUGUST 10,

2026 NO LATER THAN 3:00 PM MDT

INTERESTED VENDORS COMPLETE BLOCKS 17A AND

30A-30C ON PAGE ONE OF THE SF1449, AND ALL

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

X

XX

DATED

STEVEN M. DAHLGREN

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Government Use Only)

OFFER

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT: REFERENCE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 11/2021) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

HIGHLIGHED FIELDS WITHIN THE SF1449, THE

EVALUATING FACTORS ARE INCLUDED IN THE ATTACHED

TERMS & CONDITIONS; RETURN THE SF1449 IN ITS

ENTIRETY TO JANE.PEDROTTI@USDA.GOV, WITH ALL

REQUIRED DOCUMENTATION INCLUDING A

BROCHURE/INFORMATION SHEET OF THE PRODUCT YOU ARE

OFFERING, BY THE DUE DATE LISTED ABOVE. IT MUST

BE RECEIVED IN LISTED EMAIL INBOX BY THE DUE

DATE/TIME OR IT WILL BE CONSIDERED A LATE QUOTE.

INCOMPLETE QUOTES OR LATE QUOTES WILL NOT BE

ACCEPTABLE.

All vendors submitting quotes must currently be registered in the System for Award Management

(www.sam.gov) and provide their Unique Entity

Identifier (UEI#) number on their quote. Payment to the successful bidder will be made following receipt and acceptance of the items.

All payments are made electronically through the

Government's payment system, IPP (Invoice

Processing Platform) at www.ipp.gov.

Delivery: 60 Days After Receipt Of Order

0001 18-INCH x 24-FOOT. 16 GUAGE 2 2/3 x 1/2 33 EA

GALVANIZED SPRIAL CORRUGATED STEEL PIPE (CSP)

CULVERT

Continued ...

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

8 2 of

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 8

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

1240LP26Q0137

Delivery Location Code: 82JG

U S FOREST SERVICE

GRAND MESA UNC NATL FOREST

NORTH DELTA ADMINISTRATIVE SITE

1560 H 50 ROAD

DELTA CO 81416 US

0002 18-INCH ANNULAR BAND WITH BOLTS FOR GALVANIZED 23 EA

SPIRAL CORRUGATED STEEL PIPE (CSP) CULVERT

Delivery Location Code: 82JG

U S FOREST SERVICE

GRAND MESA UNC NATL FOREST

NORTH DELTA ADMINISTRATIVE SITE

1560 H 50 ROAD

DELTA CO 81416 US

0003 24-INCH x 24-FOOT. 16 GUAGE 2 2/3 x 1/2 3 EA

GALVANIZED SPRIAL CORRUGATED STEEL PIPE (CSP)

CULVERT

Delivery Location Code: 82JG

U S FOREST SERVICE

GRAND MESA UNC NATL FOREST

NORTH DELTA ADMINISTRATIVE SITE

1560 H 50 ROAD

DELTA CO 81416 US

0004 24-INCH ANNULAR BAND WITH BOLTS FOR GALVANIZED 2 EA

SPIRAL CORRUGATED STEEL PIPE (CSP) CULVERT

Delivery Location Code: 82JG

U S FOREST SERVICE

GRAND MESA UNC NATL FOREST

NORTH DELTA ADMINISTRATIVE SITE

1560 H 50 ROAD

DELTA CO 81416 US

0005 36-INCH x 20-FOOT. 16 GUAGE 2 2/3 x 1/2 3 EA

GALVANIZED SPRIAL CORRUGATED STEEL PIPE (CSP)

CULVERT

Delivery Location Code: 82JG

U S FOREST SERVICE

GRAND MESA UNC NATL FOREST

NORTH DELTA ADMINISTRATIVE CENTER

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

4 8

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

1240LP26Q0137

1560 H 50 ROAD

DELTA CO 81416 US

0006 36-INCH ANNULAR BAND WITH BOLTS FOR GALVANIZED 2 EA

SPIRAL CORRUGATED STEEL PIPE (CSP) CULVERT

Delivery Location Code: 82JG

U S FOREST SERVICE

GRAND MESA UNC NATL FOREST

NORTH DELTA ADMINISTRATIVE SIT

1560 H 50 ROAD

DELTA CO 81416 US

0007 DELIVERY AND UNLOADING INCLUDES EQUIPMENT AND 1 EA

LABOR. NORTH DELTA ADMINISTRATIVE SITE. 1560 H 50

ROAD, DELTA, CO. 81416

Delivery Location Code: 82JG

U S FOREST SERVICE

GRAND MESA UNC NATL FOREST

NORTH DELTA ADMINISTRATIVE SITE

1560 H 50 ROAD

DELTA CO 81416 US

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

Rev. 5/7/26

GRAND MESA, UNCOMPAHGRE & GUNNISON NF DELTA COUNTY FY2026 CULVERT

ORDER

Requisition #1170266: Solicitation Numbers: 1240LP26Q0137

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued.000

Solicitation number 1240LP26Q0137 is issued as a Request for Quotation (RFQ) for Various Sizes and amounts (EACH) of Steel Culverts, as listed in the Statement of Work that is attached to this Solicitation.

This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 237310 The small business size standard is $45M. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.

Statement of Requirement

The USDA Forest Service, requires the procurement of, and the delivery and offloading of culverts at the Delivery Location as specified in the specifications and schedule of items listed below. This Statement of Work (SOW) outlines the requirements, deliverables, and specifications for the procurement of Culverts for the Grand Mesa, Uncompahgre & Gunnison NF Delta County FY2026 Culvert Order for the Engineering Department. Minimum Specifications and Delivery Information are listed below in this Solicitation.

Schedule of Items:

Project Description: GMUG NF Delta County FY2026 Culvert Contract Pipe

Vendor Name: _ __________ Vendor UEI: _ _________________

Vendor Contact Information (Email/Phone #):________________________________________

METALLIC-COATED (GALVANIZED) SPIRAL CORRUGATED STEEL PIPE (CSP)

Item Supplies Qty Unit of Measure

Unit Price Total Price

0001 18-INCH x 24-FOOT. 16 GUAGE 2 2/3 x 1/2 GALVANIZED SPRIAL

CORRUGATED STEEL PIPE (CSP)

CULVERT

33 EACH $ $

0002 18-INCH ANNULAR BAND WITH

BOLTS FOR GALVANIZED SPIRAL

CORRUGATED STEEL PIPE (CSP)

CULVERT

23 EACH $ $

GRAND MESA, UNCOMPAHGRE & GUNNISON NF DELTA COUNTY FY2026 CULVERT

ORDER

Requisition #1170266: Solicitation Numbers: 1240LP26Q0137

Rev. 5/7/26

0003 24-INCH x 24-FOOT. 16 GUAGE 2 2/3 x 1/2 GALVANIZED SPRIAL

CORRUGATED STEEL PIPE (CSP)

CULVERT

3 EACH $ $

0004 24-INCH ANNULAR BAND WITH

BOLTS FOR GALVANIZED SPIRAL

CORRUGATED STEEL PIPE (CSP)

CULVERT

2 EACH $ $

0005 36-INCH x 20-FOOT. 16 GUAGE 2 2/3 x 1/2 GALVANIZED SPRIAL

CORRUGATED STEEL PIPE (CSP)

CULVERT

3 EACH $ $

0006 36-INCH ANNULAR BAND WITH

BOLTS FOR GALVANIZED SPIRAL

CORRUGATED STEEL PIPE (CSP)

CULVERT

2 EACH $ $

0007 DELIVERY AND UNLOADING

INCLUDES EQUIPMENT AND

LABOR. To the NORTH DELTA

ADMINISTRATIVE SITE. 1560 H 50

ROAD, DELTA, CO. 81416

1 EACH $ $

TOTAL PRICE FOR ALL LINE ITEMS LISTED ABOVE:

Total price to include delivery and offloading of all items

(SEE ATTACHED STATEMENT OF WORK)

Desired Delivery Date: 60 DAY Ater Receipt of Order

Proposed Delivery Date:_________________________

RESPONSES DUE BY AUGUST 10, 2026 AND MUST BE RECEIVED IN INBOX

OF JANE.PEDROTTI@USDA.GOV NO LATER THAN 3:00 AM MDT

Solicitation Point of Contact: Jane Pedrotti, jane.pedrotti@usda.gov, 605-800-1305

Schedule Notes:

• One Firm-Fixed Priced Award will be made from this solicitation.

• Include in your quote a Brochure/Information Sheet of the Product Offered.

• Buy American Certificate is to be completed and return with quotation. FAR 52.225-2

Provision.

Requisition #1170266: Solicitation Numbers: 1240LP26Q0137

Rev. 5/7/26

• Pricing will include all shipping and handling – including unloading and equipment needed to unload, to the Delivery Location listed below.

• Desired Delivery to be completed within 60 Days ARO or enter a Proposed Delivery Date above, but Sooner would be acceptable and appreciated. Offerors with earlier delivery dates may be rated more favorably in determining what is the “Best Value” to the Government.

• All invoices and payments will be processed through IPP. Itemized invoices will be required.

Technical Data –

The contractor shall provide various size culverts with hardware as specified in this solicitation, new from the manufacturer. The Pricing will include all shipping/handling/offloading of all items at the Delivery Location listed below:

It is recommended that the contractor rents a forklift capable of safely offloading the culverts at the administrative site.

Any culverts damaged prior to or during the offloading process will not be accepted.

Culverts can be delivered Monday through Thursday between 8:00 AM and 4:00 PM Mountain Time.

MINIMUM SPECIFICATONS: Grand Mesa, Uncompahgre, and Gunnison (GMUG) National Forests Culverts Contract Specifications

Section 707. — METAL PIPE

707.02 Metallic-Coated Corrugated Steel Pipe.

Provide pipe, special sections (such as elbows, branch connections, and prefabricated flared end sections) and coupling bands conforming to AASHTO M 36 and either AASHTO M 218, AASHTO M 274, or AASHTO M 289 for the dimensions, classification type, and thicknesses specified.

Fabricate underdrain pipe from steel sheets with a minimum thickness of 0.052 inch. Use any class of perforation specified in AASHTO M 36.

18-inch x 24-foot. 16-guage 2 2/3 x 1/2 galvanized spiral corrugated steel pipe (CSP) 18-inch band H-12 annular band with connecting bolts for spiral (CSP)

24-inch x 24-foot. 16-guage 2 2/3 x 1/2 galvanized spiral corrugated steel pipe (CSP) 24-inch band H-12 annular band with connecting bolts for spiral (CSP)

Requisition #1170266: Solicitation Numbers: 1240LP26Q0137

Rev. 5/7/26

36-inch x 20-foot. 16-guage 2 2/3 x 1/2 galvanized spiral corrugated steel pipe (CSP) 36-inch band H-12 annular band with connecting bolts for spiral (CSP)

1/2-inch x 6-inch carriage bolt and nut

Technical data and supporting documentation associated with this solicitation including the Evaluation Factors, are available through the following sources:

1. Solicitation Attachments The following documents are included as attachments to this solicitation.

• Attachment 1 – Terms and Conditions – Including Evaluation Factors

• Attachment 2 – Statement of Work

• Attachment 3 – Buy American Certificate – Needs to be completed and submitted w/Quote

Delivery

The USDA Desires delivery of all items by 60 Days After Receipt of Order (ARO) - or enter a Proposed Delivery Date in Schedule of Items. Early deliveries will be accepted.

Delivery Point Of Contact (POC):

PRIMARY CONTACT: ALTERNATE CONTACT:

NAME: Christopher Phelps NAME: Daris M Matos Justiniano EMAIL: Christopher.phelps@usda.gov EMAIL: daris.matos@usda.gov

PHONE: 970-874-6716 PHONE: 970-874-6635

Office Hours for Delivery is 8:00 AM – 4:30 PM MDT

The contractor must contact the Technical Specialist/POC a minimum of ten (10) working days in advance of delivery to ensure there is a Forest Service employee that can accept the culverts.

Shipping Instructions Items shall be shipped to the following address:

Grand Mesa, Uncompahgre & Gunnison NF North Delta Administrative Site 1560 H 50 Road, Delta, Colorado. 81416-2414

Post Award Conference:

A Post Award Conference with the successful offeror maybe requested if needed. It will be scheduled within 10 days after the date of contract award. The conference may be held via MS TEAMS and/or telephone.

mailto:Christopher.phelps@usda.gov mailto:daris.matos@usda.gov

C04-SF1449.GMUG.Culverts-1240LP26Q0137
C04b-Description.-1240LP26Q0137
Schedule Notes:
MINIMUM SPECIFICATONS: Grand Mesa, Uncompahgre, and Gunnison (GMUG) National Forests Culverts Contract Specifications

GRAND MESA, UNCOMPAHGRE & GUNNISON NF DELTA COUNTY FY2026

CULVERT ORDER

Requisition #1170266: Solicitation Numbers: 1240LP26Q0137

ATTACHMENT #1 – Terms & Conditions

Contract Clauses

Federal Acquisition Regulation (FAR) and United States Department of Agriculture Acquisition Regulation (AGAR) Clauses and Provisions The clauses and provisions contained herein are applicable to any order awarded as a result of this solicitation. The terms and conditions set forth herein supersede all other terms and conditions.

Acceptance of the order in accordance with (IAW) FAR 12.201-1(b)(2) constitutes acceptance of all terms and conditions contained herein.

As part of the Revolutionary FAR Overhaul (RFO), system updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in this solicitation. Contracting officers will rely on representations from offers based on provisions in the solicitation. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

52.252-2 Clauses Incorporated by Reference Feb 1998 This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also the full text of the clause may be accessed electronically at Internet address https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52

52.212-4 Terms and Conditions—Commercial Products and Commercial Services (Nov 2025) ☐ Alternate I (Nov 2025) of 52.212-4 52.203-17 Contractor Employee Whistleblower Rights (Nov 2023) 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) 52.222-50 Combating Trafficking in Persons (Nov 2025)

☐ Alternate I (Nov 2025) of 52.222-50 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) 52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) 52.233-3 Protest After Award (Sep 2025) 52.233-4 Applicable Law for Breach of Contract Claim (Sep 2025) 52.240-91 Security Prohibitions and Exclusions (Nov 2025)

☐ Alternate I (Nov 2025) of 52.240-91 52.244-6 Subcontracts for Commercial Products and Commercial Services (Nov 2025)

The following clauses are applicable if checked:

☒ 52.204-13 System for Award Management—Maintenance (Nov 2025) ☒ 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Sep 2025) https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52

☒ 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Sep 2025) ☒ 52.219-6 Notice of Total Small Business Aside (Nov 2025)

☐ Alternate I (Mar 2020).

☒ 52.222-3 Convict Labor (June 2003) ☒ 52.222-19 Child Labor—Cooperation with Authorities and Remedies (Nov 2025) ☒ 52.222-36 Equal Opportunity for Workers with Disabilities (Nov 2025) ☒ 52.222-40 Notification of Employee Rights Under the National Labor Relations Act (Dec 2010 ☒ 52.222-90 Addressing DEI Discrimination by Federal Contractors (Apr 2026) ☒ 52.223-23 Sustainable Products and Services (Nov 2025) ☒ 52.225-1 Buy American-Supplies (Nov 2025) ☒ 52.232-33 Payment by Electronic Funds Transfer— System for Award Management (Oct 2018)

Other Applicable Clauses

52.246-15 Certificate of Conformance (Apr 1984) 52.247-34 F.O.B. Destination (Jan 1991)

AGAR Clauses.

452.203-71 Anti-Discrimination and Diversity, Equity, and Inclusion (DEI) Compliance (May 2026)

(a) By entering into this contract, the contractor certifies that:

(1) It is compliant with all applicable Federal anti-discrimination laws and the Equal Protection principles of the U.S. Constitution, and it will remain compliant for the duration of the contract.

(2) Neither it nor any subcontractor or teaming partner operates or funds any program, policy, or initiative that promotes DEI in a manner that violates any applicable Federal anti-discrimination laws, including but not limited to Title VI and VII of the Civil Rights Act of 1964, or the Equal Protection principles of the U.S. Constitution, and the contractor and any subcontractor or teaming partner will not do so for the duration of the contract.

(b) If the contractor participates in, facilitates, or funds programs that implicate Title VI of the Civil Rights Act of 1964 or Title IX of the Education Amendments of 1972, as amended, including but not limited to grants to or for schools, colleges, universities, 4-H programs, non-governmental organization (NGO) programs, sports programs, and education-related grants to prisons or other detention facilities, the contractor certifies that it will remain compliant with those laws, including the requirements set forth in Executive Order 14168, Defending Women from Gender Ideology Extremism and Restoring Biological Truth to the Federal Government, and Executive Order 14173, Ending Illegal Discrimination and Restoring Merit-Based Opportunity.

(c) The contractor affirms that the above requirements are conditions of payment that go to the essence of the contract and are therefore material terms of the contract. Payments under the contract are predicated on compliance with the above requirements, and therefore the contractor is not eligible for funding under the contract or to retain any funding under the contract absent compliance with the above requirements.

(d) This certification reflects a change in the Government’s position regarding the materiality of the foregoing requirements and therefore any prior payment of similar claims does not reflect the materiality of the foregoing requirements to this contract.

(e) Submission of a knowing false statement relating to contractor’s compliance with the above requirements and/or eligibility for the contract may subject the contractor to liability under the False Claims Act, 31 U.S.C. § 3729, and/or criminal liability, including under 18 U.S.C. §§ 287 and 1001.

(f) The contractor must include the provisions of this clause in all subcontract solicitations.

(g) Failure on the part of the contractor or its subcontractors to comply with the terms of this clause may be grounds for the Contracting Officer to terminate this contract for default.

(End of Clause)

AGAR 452.203-72 Unenforceable Supplier Terms (MAY 2026)

(a) Definitions.

Supplier terms mean provisions customarily drafted by vendors of supplies or services and intended to create a binding legal obligation on the end user. The term applies:

1. Regardless of the format or style of the document. For example, supplier terms may appear in standard terms of sale or lease, Terms of Service (TOS), End User License Agreement (EULA), or another similar legal instrument or agreement, and may be presented as part of a proposal or quotation responding to a solicitation for a contract or order or otherwise become effective after the contract date.

2. Regardless of the media or delivery mechanism used. For example, supplier terms may be presented as one or more paper documents or may appear on a computer or other electronic device screen during a purchase, software installation, other product delivery, registration for a service, or another transaction.

(b) Applicability. When any supply or service acquired under this contract is subject to supplier terms, the supplier terms are deemed part of the contract only to the extent they are consistent with this clause. Supplier terms that conflict with any part of this clause, the contract, or Federal law are void and will not be considered incorporated into a contract, even if they are physically present in a contract documentation or systems. In the event of any inconsistency between supplier terms and this contract, this clause and the terms of the Government contract must govern and supersede any supplier terms in all cases.

(c) Authorization Required. Notwithstanding any other provision, no supplier terms must be binding on the Government unless the term is expressly authorized on the USDA Supplier Terms

Authorization Form signed by the Contracting Officer, and the completed Authorization Form has been incorporated into the contract.

(d) Unenforceable Terms. Any supplier terms that impose obligations or restrictions inconsistent with applicable Federal law are unenforceable against the Government and deemed stricken from the agreement. This includes, but is not limited to, any clause that:

(1) Requires the Government to pay future fees, penalties, interest, legal costs, early‑termination fees, cancellation fees, minimum purchase commitments, true‑up payments, seat‑count minimums, usage minimums, continued‑use charges, or any other financial obligation not expressly authorized by the contract.

(2) Requires the Government to indemnify the contractor or any other entity.

(3) Restricts the Government’s ability to obtain similar supplies or services from another source.

(4) Imposes any penalty, financial or otherwise, based on the Government’s decision not to exercise an option.

(5) Subjects the United States Government to the laws of any U.S. state, territory, district, municipality, or foreign nation, except where Federal law expressly permits such application.

(6) Requires dispute resolution in a forum or venue other than one prescribed by applicable Federal law.

(7) Establishes a period of limitations for bringing an action that differs from that provided by applicable Federal law.

(8) Grants the contractor rights to use, mine, access, aggregate, analyze, or otherwise exploit Government data, usage data, or metadata.

(9) Deems the Government to have accepted initial or revised terms based on silence, continued performance, or failure to object.

(10) Grants the supplier the right to audit Government facilities, systems, records, or use of the product or service, except as expressly authorized by the contract and applicable Federal law.

(11) Requires the Government to accept supplier security requirements, network access requirements, monitoring, penetration testing, or other technical or security measures.

(12) Permits the supplier to suspend, degrade, or terminate access to products or services based on alleged non‑payment, alleged breach, automated security triggers.

(13) Limits the Government’s right to use, install, access, test, evaluate, or transfer the licensed product or service in any manner consistent with the contract and Federal law.

(14) Requires the Government to store, process, maintain, or transmit data in a particular geographic location, or permits the supplier to transfer Government data outside the United States, except as expressly authorized by applicable Federal law.

(15) Authorizes the supplier to use the Government’s name, seal, trademark, logo, or any reference to the Government as an end user or customer for marketing, publicity, promotional activities, press releases, or similar purposes.

(16) Incorporates by reference, or requires the Government to accept, terms or conditions imposed by any third party, subcontractor, or upstream service provider, unless such terms are expressly incorporated into the contract by bilateral modification.

(17) Limits, conditions, or negates the contractor’s performance obligations, service levels, or remedies through a supplier‑provided service level agreement (SLA).

(18) Uses Government data, usage data, metadata, prompts, content, or interactions to train, fine‑tune, improve, or derive any artificial intelligence, machine learning, or automated decision‑making model.

(19) Subjects the Government to automated decision‑making, automated risk scoring, automated content moderation, or any algorithmic process that may affect access, performance, or rights under the contract.

(20) Utilizes artificial intelligence or algorithmic tools that produce decisions, recommendations, or outputs affecting contract performance without providing transparency, explainability, auditability, and bias‑mitigation consistent with applicable Federal law and policy.

(21) Profiles, tracks, or analyzes Government user behavior, preferences, communications, or interactions for personalization, marketing, or algorithmic optimization purposes.

(e) Non-binding Actions. Neither the Government nor any Government authorized end user is deemed to have consented to any term, condition, or clause by virtue of its inclusion in the supplier agreement or through the use of clickwrap, browsewrap, “I agree” mechanisms, or similar means.

Execution of such mechanisms does not bind the Government or its authorized end users to any unenforceable terms.

(f) End user. The supplier agreement must bind the ordering activity as the end user to the extent it does not conflict with the terms of this clause, but it must not bind or impose personal liability on any Government employee or any person acting on behalf of the Government in their personal capacity.

(g) Law and disputes. The supplier agreement is governed by Federal law.

(h) Statutory exception. This clause does not apply to indemnification or any other payment by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(i) Continued performance. The supplier or licensor must not unilaterally revoke, terminate, or suspend any rights granted to the Government except as allowed by the contract. If the supplier or licensor believes the ordering activity to be in breach of the supplier agreement, it must pursue its rights under the Contract Disputes Act or other applicable Federal statute while proceeding diligently with performance, pending final resolution of any dispute in accordance with the Disputes Clause at FAR 52.212‑4(d) or FAR 52.233‑1, as applicable.

(j) Arbitration. Binding arbitration must not be used unless specifically authorized by agency guidance.

(k) Equitable or injunctive relief. Equitable or injunctive relief, including the award of attorney fees, costs, or interest, may be awarded against the United States Government only when explicitly provided by statute (e.g., the Prompt Payment Act or the Equal Access to Justice Act).

(l) Revisions to supplier agreements. Any revisions to the supplier agreement must be incorporated into the contract using a bilateral modification. Unilateral revisions are not binding on the Government.

(m) No automatic renewals. If any license or service tied to periodic payment is provided under the supplier agreement (e.g., annual software maintenance or annual lease term), such license or service must not renew automatically upon expiration of its current term without prior express written consent from an authorized Government representative.

(n) Indemnification. Any clause of the supplier agreement requiring the supplier or licensor to defend or indemnify the end user is amended to provide that the U.S. Department of Justice has the sole right to represent the United States in any such action, in accordance with 28 U.S.C. 516.

(o) Taxes or surcharges. Any taxes or surcharges which the supplier or licensor seeks to pass along to the Government as end user will be governed by the terms of the associated Government contract or order and must be submitted to the Contracting Officer for a determination of applicability prior to invoicing unless specifically agreed otherwise.

(p) Non‑assignment. The supplier agreement may not be assigned, nor may any rights or obligations thereunder be delegated, without the Government’s prior approval, except as expressly permitted by FAR 52.212-4(b) or FAR 52.232-23, as applicable.

(q) Confidential information. If the supplier agreement includes a confidentiality clause, such clause is amended to state that neither the agreement nor the contract price list, as applicable, must be deemed “confidential information.” Issues regarding release of “unit pricing” will be resolved consistent with the Freedom of Information Act. Notwithstanding anything in the supplier agreement to the contrary, the Government may retain any confidential information as required by law, regulation, or its internal document retention procedures for legal, regulatory, or compliance purposes; provided, however, that all such retained confidential information will continue to be subject to the confidentiality obligations of the supplier agreement.

(r) Conflict with Federal law. If any other language, provision, or clause of the supplier agreement conflicts or is inconsistent with Federal law or the terms and conditions of this contract, such language, provisions, or clauses will be considered null and void and will not be binding on the United States Government.

452.204–70 Modification for Contract Closeout (Apr 2026)

(a) If unliquidated funds in the amount of $1000 or less remain on the contract, the Contracting Officer (Contracting Officer) may issue a unilateral modification for deobligation. The contractor will receive a copy of the modification but is not required to provide a signature. The Contracting Officer will immediately proceed with contract closeout upon completion of the period of performance, receipt and acceptance of supplies or services, and final payment.

(b) For commercial contracts not exceeding the simplified acquisition procedure threshold under FAR 12.001(c), if more than $1,000 in unliquidated funds remain at closeout, the Contracting Officer will issue a bilateral deobligation modification. Only the modification requires the contractor’s signature, though a Release of Claims may be requested. If the required documents are not returned within 60 days, the Contracting Officer will issue a unilateral modification and proceed with closeout once performance is complete, acceptance is confirmed, and final payment is made.

(c) For all other non-commercial or non–cost‑reimbursement contracts, if more than $1,000 in unliquidated funds remain at closeout, the Contracting Officer will issue a bilateral deobligation modification and a Release of Claims, both requiring contractor signature. If these documents are not returned within 120 days, the Contracting Officer will issue a unilateral modification u and proceed with closeout upon completion of performance, acceptance, and final payment.

Solicitation Information

Award Type

It is anticipated that a Firm Fixed-Priced Contract will be awarded as a result of this synopsis/solicitation.

The Government intends to make one award from this solicitation. Therefore, to be considered responsive, contractors must submit pricing for all items.

Evaluation and Basis for Award

The provision at FAR 52.212-2, Evaluation—Commercial Products and Commercial Services is not applicable to this solicitation. In lieu of this provision, quotes will be evaluated in accordance with FAR 12.203 based on the criteria listed below.

Technical Approach:

The technical approach will evaluate the ability of the offeror to provide a sound and compliant approach that meets all requirements and shows a thorough understanding of them. It is the contractor's responsibility to ensure their quotation clearly demonstrates their capability to meet these requirements. All offerors must provide the following minimum information and documentation with their quotations to be considered responsive and have their offers evaluated:

• Ability of the offeror to meet the schedule requirements listed in the Solicitation Including the Buy America Certificate

Price:

The offeror shall provide pricing as requested in the Schedule of Items on page 5 of this Request for Quote. Failure to propose pricing for all individual line items may result in a quotation being excluded from further consideration. The offeror’s quotation will be evaluated in accordance with FAR 12.204, to determine if it is fair and reasonable.

Evaluation Method:

The Government will evaluate quotations based on the lowest price technically acceptable criteria.

Only the lowest priced offer will be evaluated for Technical Acceptability. Should the lowest priced offer not receive an acceptable technical or past performance rating, the process will continue in order of lowest priced offer until the lowest price, technically acceptable offer with acceptable or neutral past performance is identified.

FAR 52.212-2 Evaluation - Commercial Products and Commercial Services (Nov 2025)

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

PRICE

TECHNICAL

DELIVERY DATE

(b) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

Delivery Information

F.o.b. destination, is requested as the F.O.B. point for all deliverables.

All offers will be considered F.O.B. Destination unless F.O.B. origin is specified AND estimated shipping costs are included.

The USDA desires delivery of all items by 60 Days After Receipt of Order (ARO)- or enter a Proposed Delivery Date in Schedule of Item. Early deliveries will be accepted.

Shipping Instructions:

Items shall be shipped to the following address:

Grand Mesa, Uncompahgre & Gunnison NF North Delta Administrative Site 1560 H 50 Road, Delta, Colorado. 81416-2414

Office Hours: Monday – Friday, 8:00 AM – 4:30 PM MDT

PRIMARY CONTACT: ALTERNATE CONTACT:

NAME: Christopher Phelps NAME: Daris M Matos Justiniano EMAIL: Christopher.phelps@usda.gov EMAIL: daris.matos@usda.gov

PHONE: 970-874-6716 PHONE: 970-874-6635

**NOTE** The contractor must contact the Technical Specialist/POC a minimum of ten (10) working days in advance of delivery to ensure there is a Forest Service employee that can accept the culverts.

mailto:Christopher.phelps@usda.gov mailto:daris.matos@usda.gov

52.252-1 Solicitation Provisions Incorporated by Reference Feb 1998 This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52

52.212-1 Instructions to Offerors - Commercial Products and Commercial Services (Nov 2025) FAR 52.212-1 is amended as follows:

Period for acceptance of offers.

The Offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers.

Questions:

Questions shall be submitted via email to jane.pedrotti@usda.gov and are due no later than August 4, 2026, at 12:00 PM Mountain Daylight Time. This will ensure enough time to respond before the solicitation period ends. Please include the solicitation name and number as the subject line of the email.

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation (Jan 2017) 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations - Representation (Sep 2025) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Sep 2025) 52.240-90 Security Prohibitions and Exclusions Representations and Certifications (Nov 2025)

The following provisions are applicable if checked:.

☒ 52.204-7 System for Award Management—Registration (Nov 2025) ☒ 52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products (Feb 2021) ☒ 52.225-2 Buy American Certificate (Oct 2022)

Other Applicable FAR Provisions 52.225-18 Place of Manufacture (Aug 2018) mailto:jane.pedrotti@usda.gov

AGAR Provisions

452.203-70 Anti-Discrimination and Diversity, Equity, and Inclusion (DEI) Certification (Dec 2025)

(a) By submission of its offer, the offeror certifies that:

(1) It is compliant with all applicable Federal anti-discrimination laws and the Equal Protection principles of the U.S. Constitution.

(2) Neither it nor any proposed subcontractor or teaming partner operates or funds any program, policy, or initiative that promotes DEI in a manner that violates any applicable Federal anti-discrimination laws, including but not limited to Title VI and VII of the Civil Rights Act of 1964, or the Equal Protection principles of the U.S. Constitution.

(b) If the offeror participates in, facilitates, or funds programs that implicate Title VI of the Civil Rights Act of 1964 or Title IX of the Education Amendments of 1972, as amended, including but not limited to grants to or for schools, colleges, universities, 4-H programs, non-governmental organization (NGO) programs, sports programs, and education-related grants to prisons or other detention facilities, by submission of its offer, the offeror certifies that it is compliant with those laws, including the requirements set forth in Executive Order 14168, Defending Women from Gender Ideology Extremism and Restoring Biological Truth to the Federal Government, and Executive Order 14173, Ending Illegal Discrimination and Restoring Merit-Based Opportunity.

(c) The offeror affirms that the above requirements are conditions of payment that go to the essence of the contract and are therefore material terms of the contract. Payments under the contract are predicated on compliance with the above requirements, and therefore the offeror will not be eligible for funding under the contract or to retain any funding under the contract absent compliance with the above requirements.

(d) This certification reflects a change in the Government’s position regarding the materiality of the foregoing requirements and therefore any prior payment of similar claims does not reflect the materiality of the foregoing requirements to this contract.

(e) Submission of a knowing false statement relating to offeror’s compliance with the above requirements and/or eligibility for the contract may subject the offeror to liability under the False Claims Act, 31 U.S.C. § 3729, and/or criminal liability, including under 18 U.S.C. §§ 287 and 1001.

(f) Failure on the part of the offeror or its subcontractors to comply with the terms of this clause may be grounds for the Contracting Officer to terminate the contract for default.

(End of Provision)

NOTICE FOR FILING AGENCY PROTESTS

United States Department of Agriculture (USDA) Protest Procedures

The United States Department of Agriculture (USDA) is committed to fair, transparent, and efficient acquisitions. Interested parties with concerns about this solicitation are encouraged to seek resolution through the following USDA procedures.

Tier 1: Contracting Officer Concern Resolution

Submission: Interested parties with concerns about either the solicitation or subsequent award should first submit their concern directly to the Contracting Officer, providing sufficient detail to allow the Contracting Officer to understand and assess the issue.

Process: The Contracting Officer will review the concern, seek clarification as needed, and engage with the interested party to attempt prompt resolution.

Review Timeline: The Contracting Officer will make every effort to provide a response or resolution within 10 business days of receiving the concern.

Effect on Award or Performance: Tier 1 engagement is not considered an official notification of filing an agency protest and does not pause solicitation deadlines, delay award decisions, or suspend contract performance.

Next Steps: If the matter cannot be resolved at Tier 1, the interested party may file a written agency protest under Tier 2.

USDA encourages all parties to seek resolution with the Contracting Officer before filing an agency protest.

Tier 2: Agency Protest If concerns cannot be resolved at Tier 1, an interested party may file a written agency protest with either the Contracting Officer or the USDA Independent Review Authority. The decision by the USDA Independent Review Authority is an alternative to a decision by the Contracting Officer. The USDA Independent Review Authority will not consider an appeal of the Contracting Officer’s decision on an agency protest.

The protest must state whether the protester elects review by the Contracting Officer, by the UDSA Independent Review Authority. If no election is stated, the Contracting Officer will decide the protest.

Required Information: Protests shall include the information set forth in FAR 33.104-4 (a)(3).

Failure to submit the required information may result in a delay or dismissal of the protest.

Submission: Agency protests should be submitted electronically to SPE.inquiry@usda.gov and the Contracting Officer.

mailto:SPE.inquiry@usda.gov

Timeliness: Protests must be filed within the timeframes specified in FAR 33.104.

Effect on Award or Performance: Contract awards or performance will be suspended during the protest period unless justified in writing for urgent and compelling reasons or determined to be in the best interest of the Government.

Review Timeline: USDA strives to resolve agency-level protests within 35 business days of receipt.

Election of Forum: By filing a protest with USDA, the protesters agree not to file a protest on the same matter with the Government Accountability Office (GAO) or any other external forum while the agency protest is pending. If such a protest is filed externally, the USDA agency protest will be dismissed.

Questions: Questions regarding this notice or protest procedures should be directed to the Contracting Officer identified in this solicitation.

ATTACHMENT #1

US Department of Agriculture (USDA)

Statement of Work

Contents Project General Information

1.0 Scope of Work

2.0 Background

Contractor Requirements

3.0 Technical Requirements / Tasks

4.0 Government Furnished

5.0 Deliverables / Schedule

6.0 Travel

7.0 Contractor’s Key Personnel

8.0 Security Requirements

9.0 Data Rights

10.0 Section 508 – Electronic and Information Technology Standards Attachment

Project GMUG NF Culvert Contract

General Information

1.0 Scope of Work

The scope of this project is the purchase, delivery, and offloading of culverts as specified in the specifications and schedule of items.

2.0 Background

The general description of the requirement is the purchase and delivery of culverts. A similar contract of this scope was awarded in 2025.

Contractor Requirements

3.0 Technical Requirements / Tasks

The contractor must procure, deliver, and offload the culverts at the USDA Forest Service North Delta Administrative site at 1560 H 50 Road, Delta, Colorado.

It is recommended that the contractor rents a forklift capable of safely offloading the culverts at the administrative site.

Any culverts damaged prior to or during the offloading process will not be accepted. Culverts can be delivered Monday through Thursday between 8:00 AM and 4:00 PM. The contractor must contact the technical specialist a minimum of ten

(10) working days in advance of delivery to ensure there is a Forest Service employee that can accept the culverts.

Culvert requirements.

Section 707. — METAL PIPE

707.02 Metallic-Coated Corrugated Steel Pipe.

Provide pipe, special sections (such as elbows, branch connections, and prefabricated flared end sections) and coupling bands conforming to AASHTO M 36 and either AASHTO M 218, AASHTO M 274, or AASHTO M 289 for the dimensions, classification type, and thicknesses specified.

Fabricate underdrain pipe from steel sheets with a minimum thickness of 0.052 inch. Use any class of perforation specified in AASHTO M 36.

18-inch x 24-foot. 16-guage 2 2/3 x 1/2 galvanized spiral corrugated steel pipe (CSP) 18-inch band H-12 annular band with connecting bolts for spiral (CSP)

24-inch x 24-foot. 16-guage 2 2/3 x 1/2 galvanized spiral corrugated steel pipe (CSP) 24-inch band H-12 annular band with connecting bolts for spiral (CSP)

36-inch x 20-foot. 16-guage 2 2/3 x 1/2 galvanized spiral corrugated steel pipe (CSP) 36-inch band H-12 annular band with connecting bolts for spiral (CSP)

Refer to the schedule of items for quantities needed.

4.0 Government Furnished

There is NO government furnished property.

5.0 Deliverables / Schedule

Refer to the Schedule of Items (Bid Schedule) for deliverables. The contractor is responsible for delivering the culverts within 60 days of receipt of award.

6.0 Travel

Not applicable

7.0 Contractor’s Key Personnel

8.0 Security Requirements

Not applicable

9.0 Data Rights

Not applicable

10.0 Section 508 – Electronic and Information Technology Standards Not applicable

Attachments

Project

General Information

1.0 Scope of Work

2.0 Background

Contractor Requirements

3.0 Technical Requirements / Tasks

4.0 Government Furnished

5.0 Deliverables / Schedule

6.0 Travel

7.0 Contractor’s Key Personnel

8.0 Security Requirements

9.0 Data Rights

10.0 Section 508 – Electronic and Information Technology Standards

Attachments

ATTACHMENT #3 – COMPLETE AND RETURN WITH QUOTE

FAR 52.225.2 -- BUY AMERICAN CERTIFICATE (OCT 2022)

(a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component.

(2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

(4) The terms “commercially available off-the-shelf (COTS) item,” “critical component,” "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(b)Foreign End Products:

Line Item No. Country of Origin

______0001 - 0006________ _________________

(b)[List as necessary]

(c) Domestic end products containing a critical component:

Line Item No. ___

[List as necessary]

(d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation.

https://www.acquisition.gov/far/25.105#FAR_25_105 https://www.acquisition.gov/far/part-25#FAR_Part_25

File details come from the government source that posted it. Updated .