C04_Attachment I - Terms and Conditions_1232SA26Q1283.pdf

Attachment I Pruning Tower Lift 25 Ft

1232SA26Q1283

Statement of Requirement The USDA Pecan Breeding and Genetic Research Unit has a requirement for two pruning tower 25 foot lifts at Somerville TX. Reference all attachments.

Schedule of Items

See CLIN schedule on SF-1449.

Requirement is Subject to Trade Agreements.

FAR Clause 52.225-5 Trade Agreements (Nov 2023) and FAR Provision in full text 52.225- Trade Agreements Certificate (Feb 2021) is incorporated into this solicitation. Ensure to complete the Provision 52.225-6 Trade Agreements Certificates (Feb 2021) information.

Technical Data -

Technical data and supporting documentation associated with this solicitation are available through the following sources:

1. Solicitation Attachments The following documents are included as attachments to this solicitation and can be accessed via the “Attachments/Links” section of the posting.

• Attachment I – Terms and Conditions

• Attachment II – Specifications

• Attachment III – Contractor Request for Information

• Attachment IV – Past Performance Questionnaire

Federal Acquisition Regulation (FAR) and United States Department of Agriculture Acquisition Regulation (AGAR) Clauses and Provisions The clauses and provisions contained herein are applicable to any order awarded as a result of this solicitation. The terms and conditions set forth herein supersede all other terms and conditions.

Acceptance of the order in accordance with (IAW) FAR 12.201-1(b)(2) constitutes acceptance of all terms and conditions contained herein.

As part of the Revolutionary FAR Overhaul (RFO), system updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in this solicitation. Contracting officers will rely on representations from offers based on provisions in the solicitation. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

52.252-2 Clauses Incorporated by Reference Feb 1998 This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also the full text of the clause may be accessed electronically at Internet address https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52

52.212-4 Terms and Conditions—Commercial Products and Commercial Services (Nov 2025) ☐ Alternate I (Nov 2025) of 52.212-4 52.203-17 Contractor Employee Whistleblower Rights (Nov 2023) 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Aug 2025) 52.222-50 Combating Trafficking in Persons (Nov 2025)

☐ Alternate I (Nov 2025) of 52.222-50 52.222-90 Addressing DEI Discrimination by Federal Contractors (Apr 2026) 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) 52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) 52.233-3 Protest After Award (Sep 2025) 52.233-4 Applicable Law for Breach of Contract Claim (Sep 2025) 52.240-91 Security Prohibitions and Exclusions (Nov 2025)

☐ Alternate I (Nov 2025) of 52.240-91 52.244-6 Subcontracts for Commercial Products and Commercial Services (Nov 2025)

The following clauses are applicable if checked:

☒ 52.204-13 System for Award Management—Maintenance (Nov 2025) ☒ 52.222-3 Convict Labor (June 2003) ☒ 52.222-19 Child Labor—Cooperation with Authorities and Remedies (Nov 2025) ☒ 52.222-36 Equal Opportunity for Workers with Disabilities (Nov 2025)

☐ Alternate I (Jul 2014) of 52.222-36 ☒ 52.223-23 Sustainable Products and Services (Nov 2025) ☐ 52.225-5 Trade Agreements (Nov 2023) ☒ 52.229-12 Tax on Certain Foreign Procurements ☒ 52.232-33 Payment by Electronic Funds Transfer— System for Award Management (Oct 2018) ☒ 52.247-34 F.O.B. Destination (Jan 1991)

AGAR Clauses

452.203-71 Anti-Discrimination and Diversity, Equity, and Inclusion (DEI) Compliance (May 2026)

(a) By entering into this contract, the contractor certifies that:

(1) It is compliant with all applicable Federal anti-discrimination laws and the Equal Protection principles of the U.S. Constitution, and it will remain compliant for the duration of the contract.

(2) Neither it nor any subcontractor or teaming partner operates or funds any program, policy, or initiative that promotes DEI in a manner that violates any applicable Federal anti-discrimination laws, including but not limited to Title VI and VII of the Civil Rights Act of 1964, or the Equal Protection principles of the U.S. Constitution, and the contractor and any subcontractor or teaming partner will not do so for the duration of the contract.

(b) If the contractor participates in, facilitates, or funds programs that implicate Title VI of the Civil Rights Act of 1964 or Title IX of the Education Amendments of 1972, as amended, including but not limited to grants to or for schools, colleges, universities, 4-H programs, non-governmental organization (NGO) programs, sports programs, and education-related grants to prisons or other detention facilities, the contractor certifies that it will remain compliant with those laws, including the requirements set forth in Executive Order 14168, Defending Women from Gender Ideology Extremism and Restoring Biological Truth to the Federal Government, and Executive Order 14173, Ending Illegal Discrimination and Restoring Merit-Based Opportunity.

(c) The contractor affirms that the above requirements are conditions of payment that go to the essence of the contract and are therefore material terms of the contract. Payments under the contract are predicated on compliance with the above requirements, and therefore the contractor is not eligible for funding under the contract or to retain any funding under the contract absent compliance with the above requirements.

(d) This certification reflects a change in the Government’s position regarding the materiality of the foregoing requirements and therefore any prior payment of similar claims does not reflect the materiality of the foregoing requirements to this contract.

(e) Submission of a knowing false statement relating to contractor’s compliance with the above requirements and/or eligibility for the contract may subject the contractor to liability under the False Claims Act, 31 U.S.C. § 3729, and/or criminal liability, including under 18 U.S.C. §§ 287 and 1001.

(f) The contractor must include the provisions of this clause in all subcontract solicitations.

(g) Failure on the part of the contractor or its subcontractors to comply with the terms of this clause may be grounds for the Contracting Officer to terminate this contract for default.

(End of Clause)

AGAR 452.203-72 Unenforceable Supplier Terms (MAY 2026)

(a) Definitions.

Supplier terms mean provisions customarily drafted by vendors of supplies or services and intended to create a binding legal obligation on the end user. The term applies:

1. Regardless of the format or style of the document. For example, supplier terms may appear in standard terms of sale or lease, Terms of Service (TOS), End User License Agreement (EULA), or another similar legal instrument or agreement, and may be presented as part of a proposal or quotation responding to a solicitation for a contract or order or otherwise become effective after the contract date.

2. Regardless of the media or delivery mechanism used. For example, supplier terms may be presented as one or more paper documents or may appear on a computer or other electronic device screen during a purchase, software installation, other product delivery, registration for a service, or another transaction.

(b) Applicability. When any supply or service acquired under this contract is subject to supplier terms, the supplier terms are deemed part of the contract only to the extent they are consistent with this clause. Supplier terms that conflict with any part of this clause, the contract, or Federal law are void and will not be considered incorporated into a contract, even if they are physically present in a contract documentation or systems. In the event of any inconsistency between supplier terms and this contract, this clause and the terms of the Government contract must govern and supersede any supplier terms in all cases.

(c) Authorization Required. Notwithstanding any other provision, no supplier terms must be binding on the Government unless the term is expressly authorized on the USDA Supplier Terms Authorization Form signed by the Contracting Officer, and the completed Authorization Form has been incorporated into the contract.

(d) Unenforceable Terms. Any supplier terms that impose obligations or restrictions inconsistent with applicable Federal law are unenforceable against the Government and deemed stricken from the agreement. This includes, but is not limited to, any clause that:

(1) Requires the Government to pay future fees, penalties, interest, legal costs, early‑termination fees, cancellation fees, minimum purchase commitments, true‑up payments, seat‑count minimums, usage minimums, continued‑use charges, or any other financial obligation not expressly authorized by the contract.

(2) Requires the Government to indemnify the contractor or any other entity.

(3) Restricts the Government’s ability to obtain similar supplies or services from another source.

(4) Imposes any penalty, financial or otherwise, based on the Government’s decision not to exercise an option.

(5) Subjects the United States Government to the laws of any U.S. state, territory, district, municipality, or foreign nation, except where Federal law expressly permits such application.

(6) Requires dispute resolution in a forum or venue other than one prescribed by applicable Federal law.

(7) Establishes a period of limitations for bringing an action that differs from that provided by applicable Federal law.

(8) Grants the contractor rights to use, mine, access, aggregate, analyze, or otherwise exploit Government data, usage data, or metadata.

(9) Deems the Government to have accepted initial or revised terms based on silence, continued performance, or failure to object.

(10) Grants the supplier the right to audit Government facilities, systems, records, or use of the product or service, except as expressly authorized by the contract and applicable Federal law.

(11) Requires the Government to accept supplier security requirements, network access requirements, monitoring, penetration testing, or other technical or security measures.

(12) Permits the supplier to suspend, degrade, or terminate access to products or services based on alleged non‑payment, alleged breach, automated security triggers.

(13) Limits the Government’s right to use, install, access, test, evaluate, or transfer the licensed product or service in any manner consistent with the contract and Federal law.

(14) Requires the Government to store, process, maintain, or transmit data in a particular geographic location, or permits the supplier to transfer Government data outside the United States, except as expressly authorized by applicable Federal law.

(15) Authorizes the supplier to use the Government’s name, seal, trademark, logo, or any reference to the Government as an end user or customer for marketing, publicity, promotional activities, press releases, or similar purposes.

(16) Incorporates by reference, or requires the Government to accept, terms or conditions imposed by any third party, subcontractor, or upstream service provider, unless such terms are expressly incorporated into the contract by bilateral modification.

(17) Limits, conditions, or negates the contractor’s performance obligations, service levels, or remedies through a supplier‑provided service level agreement (SLA).

(18) Uses Government data, usage data, metadata, prompts, content, or interactions to train, fine‑tune, improve, or derive any artificial intelligence, machine learning, or automated decision‑making model.

(19) Subjects the Government to automated decision‑making, automated risk scoring, automated content moderation, or any algorithmic process that may affect access, performance, or rights under the contract.

(20) Utilizes artificial intelligence or algorithmic tools that produce decisions, recommendations, or outputs affecting contract performance without providing transparency, explainability, auditability, and bias‑mitigation consistent with applicable Federal law and policy.

(21) Profiles, tracks, or analyzes Government user behavior, preferences, communications, or interactions for personalization, marketing, or algorithmic optimization purposes.

(e) Non-binding Actions. Neither the Government nor any Government authorized end user is deemed to have consented to any term, condition, or clause by virtue of its inclusion in the supplier agreement or through the use of clickwrap, browsewrap, “I agree” mechanisms, or similar means.

Execution of such mechanisms does not bind the Government or its authorized end users to any unenforceable terms.

(f) End user. The supplier agreement must bind the ordering activity as the end user to the extent it does not conflict with the terms of this clause, but it must not bind or impose personal liability on any Government employee or any person acting on behalf of the Government in their personal capacity.

(g) Law and disputes. The supplier agreement is governed by Federal law.

(h) Statutory exception. This clause does not apply to indemnification or any other payment by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(i) Continued performance. The supplier or licensor must not unilaterally revoke, terminate, or suspend any rights granted to the Government except as allowed by the contract. If the supplier or licensor believes the ordering activity to be in breach of the supplier agreement, it must pursue its rights under the Contract Disputes Act or other applicable Federal statute while proceeding diligently with performance, pending final resolution of any dispute in accordance with the Disputes Clause at FAR 52.212‑4(d) or FAR 52.233‑1, as applicable.

(j) Arbitration. Binding arbitration must not be used unless specifically authorized by agency guidance.

(k) Equitable or injunctive relief. Equitable or injunctive relief, including the award of attorney fees, costs, or interest, may be awarded against the United States Government only when explicitly provided by statute (e.g., the Prompt Payment Act or the Equal Access to Justice Act).

(l) Revisions to supplier agreements. Any revisions to the supplier agreement must be incorporated into the contract using a bilateral modification. Unilateral revisions are not binding on the Government.

(m) No automatic renewals. If any license or service tied to periodic payment is provided under the supplier agreement (e.g., annual software maintenance or annual lease term), such license or service must not renew automatically upon expiration of its current term without prior express written consent from an authorized Government representative.

(n) Indemnification. Any clause of the supplier agreement requiring the supplier or licensor to defend or indemnify the end user is amended to provide that the U.S. Department of Justice has the sole right to represent the United States in any such action, in accordance with 28 U.S.C. 516.

(o) Taxes or surcharges. Any taxes or surcharges which the supplier or licensor seeks to pass along to the Government as end user will be governed by the terms of the associated Government contract or order and must be submitted to the Contracting Officer for a determination of applicability prior to invoicing unless specifically agreed otherwise.

(p) Non‑assignment. The supplier agreement may not be assigned, nor may any rights or obligations thereunder be delegated, without the Government’s prior approval, except as expressly permitted by FAR 52.212-4(b) or FAR 52.232-23, as applicable.

(q) Confidential information. If the supplier agreement includes a confidentiality clause, such clause is amended to state that neither the agreement nor the contract price list, as applicable, must be deemed “confidential information.” Issues regarding release of “unit pricing” will be resolved consistent with the Freedom of Information Act. Notwithstanding anything in the supplier agreement to the contrary, the Government may retain any confidential information as required by law, regulation, or its internal document retention procedures for legal, regulatory, or compliance purposes; provided, however, that all such retained confidential information will continue to be subject to the confidentiality obligations of the supplier agreement.

(r) Conflict with Federal law. If any other language, provision, or clause of the supplier agreement conflicts or is inconsistent with Federal law or the terms and conditions of this contract, such language, provisions, or clauses will be considered null and void and will not be binding on the United States Government.

(End of Clause)

452.204–70 Modification for Contract Closeout (Apr 2026)

(a) If unliquidated funds in the amount of $1000 or less remain on the contract, the Contracting Officer (Contracting Officer) may issue a unilateral modification for deobligation. The contractor will receive a copy of the modification but is not required to provide a signature. The Contracting Officer will immediately proceed with contract closeout upon completion of the period of performance, receipt and acceptance of supplies or services, and final payment.

(b) For commercial contracts not exceeding the simplified acquisition procedure threshold under FAR 12.001(c), if more than $1,000 in unliquidated funds remain at closeout, the Contracting Officer will issue a bilateral deobligation modification. Only the modification requires the contractor’s signature, though a Release of Claims may be requested. If the required documents are not returned within 60 days, the Contracting Officer will issue a unilateral modification and proceed with closeout once performance is complete, acceptance is confirmed, and final payment is made.

(c) For all other non-commercial or non–cost‑reimbursement contracts, if more than $1,000 in unliquidated funds remain at closeout, the Contracting Officer will issue a bilateral deobligation modification and a Release of Claims, both requiring contractor signature. If these documents are not returned within 120 days, the Contracting Officer will issue a unilateral modification u and proceed with closeout upon completion of performance, acceptance, and final payment.

(End of Clause)

452.204-72 Use of Electronic Data Interchange (EDI) or Other Automation Technologies (Apr 2026)

(a) In the event that Electronic Data Interchange (EDI) functionality or other automation technologies such as Robotics Process Automation is utilized to facilitate electronic transactions between USDA and its contractors, it is the sole responsibility of the Contractor to ensure accuracy of the electronically transferred data. The Government’s electronic system shall serve as the system of record for all data exchanged or retrieved.

(b) The Government shall not be liable to the Contractor for any delay or failure associated with EDI or other automation technologies. The Contractor’s use of this service is at the Contractor’s sole risk. For electronic or automated services provided by USDA to the contractor, the services are provided on an “as is” and “as available” basis. For electronic or automated services provided by the contractor that interact with the USDA electronic systems, the USDA is not responsible for any costs incurred by the contractor related to the development, test, or support of the services. The Contractor shall be responsible for all fees associated with EDI. The Contractor is responsible for the confidentiality and security of its systems, interfaces, interconnections, and any documents that the customer receives from The Government pursuant to the contract.

(c) The Government reserves the right to restrict, refuse, or cancel any participation in EDI services.

(End of clause)

452.211-74 Delivery Instructions – Commodity Procurement (Sep 2025)

The Government will issue electronic purchase orders in WBSCM and notify the contractor via email. The contractor must ensure it can receive emails during the contract and maintain an accurate email address on file. The Government is not responsible for email receipt failures due to contractor equipment or software issues. The Government reserves the right to also issue Purchase Orders by alternative methods, including fax or regular mail.

452.211-75 Advance Shipment Notice (ASN) and Unloading Appointment (May 2026)

(a) The contractor must enter a WBSCM advanced shipment notice (ASN) on or before the shipment date. Contractors are encouraged to create the ASN as soon as a delivery appointment is scheduled, but no less than 24 hours beforehand. Accurate information must be provided in the ASN, which alerts the recipient agency of the shipment. Advanced shipment notices must include:

Shipper’s name Commodity Sales Order or Requisition Number (SO or RN) Units per (SO or RN) Destination Purchase Order Number Ship date Mode of transportation. If truck, anticipated date of arrival.

Note: USDA has provided an excel template in a comma delimited (csv) format that allows the contractor to upload purchase order line items that will create multiple ASNs.

(b) Creating the ASN does not exempt the contractor or subcontractor from securing an unloading appointment, which is mandatory for all deliveries.

(c) Delivery appointments must be scheduled as far in advance of expected delivery as possible, but not less than 72 hours prior to delivery by contacting the representative responsible at the applicable Purchase Order Item’s Ship-to-Address for an unload appointment. Reference the Purchase Order (PO) Number, PO Item Number, and when provided, the Sales Order (SO) Number and SO Item Number for which the appointment is being scheduled. The contractor is fully responsible for any issues caused by failing to schedule or being late for appointments.

(d) The contractor may deliver early if the recipient agency agrees to accept early delivery, there is no additional cost to the Government, and upon AMS personnel being available to perform any necessary check loading and acceptance requirements, if applicable.

452.211-76 Regulatory Requirements for Commodities and Packaging (May 2026)

(a) The commodity must conform to the applicable provisions of the "Federal Food, Drug, and Cosmetic Act" (21 U.S.C. 301 et. seq.), as amended, and the relevant regulations, including applicable Food Safety Modernization Act regulations (FSMA), and sections in the Public Health Security and Bioterrorism Preparedness and Response Act of 2002 (the Bioterrorism Act). The contractor must comply with all applicable Federal, State, and local laws, executive orders, rules, and regulations related to its performance under this contract.

(b) All containers and packaging materials must meet FDA requirements for safe contact with food.

The contractor must maintain documentation from the manufacturer to verify compliance with these requirements. Packaging and container materials from foreign countries must not display country of origin labeling, such as "Made in [Foreign Country]" or "Product of [Foreign Country]."

(c) All containers and packaging materials must comply with Coalition of Northeast Governors (CONEG) model legislation. The combined concentration of lead, cadmium, mercury, and/or hexavalent chromium must not exceed 100 parts per million. Concentration levels should be determined using American Standard of Testing Materials test methods, as revised or Environmental Protection Agency test methods for evaluating solid waste, S-W 846, as revised.

452.211-77 Commodity/Packing Labeling Requirements

(a) USDA Foods products must comply with all applicable FDA labeling requirements:

https://www.fda.gov/media/81606/download and any additional features outlined in USDA Product Specifications & Requirements: https://www.ams.usda.gov/selling-food/product-specs.

Any deviations from the labeling requirements in this section must be approved by the Contracting Officer, in writing, prior to start of production.

Primary packaging labels or shipping containers with missing or incorrect information must be corrected before the product can be shipped.

(b) PRIMARY PACKAGING (Immediate Container):

FDA/USDA defines minimum label information on primary packaging:

i. Company name

ii. Company/Plant location or FSIS establishment number.

iii. Food item

iv. Ingredient list

v. Allergen statement, as applicable

vi. Nutrition Facts Panel (except for foodservice pack products)

vii. Traceability code (see below)

viii. Cooking/heating/handling instructions, as applicable

2. Commercial labels must be the processor’s own retail label (e.g., commercially available off-the-shelf). Distributors’ labels are not allowed. If the vendor lacks a retail/consumer sales label, refer to the minimum color requirements, exclusive of the package color, in the commodity specifications.

For products where the primary container hides the product, the label must provide a visual representation of the food.

3. Traceable Product Codes. Labeling and packaging must meet all FDA and USDA requirements and include a traceable product code for recalls. The identification system must distinguish products made for USDA contracts from non-USDA products if the same commercial label is used for both.

4. Nutrition Facts, Ingredients and Allergen statements. Consumer and individual sized containers must include a Nutrition Facts Panel, ingredients, and allergen statement. The ingredient statement must be listed separately from the name of the product, even for single-ingredient foods (e.g., Ingredients: ___). The allergen statement must comply with the Food Allergen Labeling and Consumer Protection Act (FALCPA) and the Food Allergy Safety, Treatment, Education, and Research Act (FASTER Act) which define milk, eggs, fish, Crustacean shellfish, tree nuts, wheat, peanuts, soybeans, and sesame as well as any food ingredient that contains protein derived from one of these foods, with the exception of highly refined oils, as “major food allergens.”; e.g.

Contains:_____ .

5. Reporting Product Information to GS1 Global Data Synchronization Network (GDSN).

Contractors are required to report product information to GS1’s GDSN for a select number of items purchased for the National School Lunch Program. The items that must be reported to GS1 GDSN are in the List of Required Products for GS1 GDSN Reporting, found at https://www.ams.usda.gov/selling-food/gs1-gdsn-overview. Contractors must report product information to GS1 GDSN within 20 days of receiving a contract award, if the contract includes items on the List of Required Products for GS1 GDSN Reporting.

Note: USDA may request nutrition information, ingredient and allergen statements, and Child Nutrition Program crediting information for USDA Foods products that are not on the List of Required Products for GS1 GDSN Reporting. Contractors must provide this information through branded product information sheets, product brochures, or label images upon request.

(d) SHIPPING CONTAINERS:

Shipping containers/carton labels must include:

i. USDA Material code

ii. Purchase order number

iii. Company name

iv. Company/Plant location or FSIS establishment number

v. Food item

vi. Ingredient list

vii. Allergen statement, as applicable

viii. Nutrition Facts Panel (foodservice pack products only)

ix. Traceability code

x. UPC symbol/code (see below)

xi. USDA Shield, when applicable

2. Labeling and marking information must be water-fast, non-smearing, of a contrasting color, clear and readable.

3. Information must be preprinted, stamped, stenciled, or applied with a self-adhesive label on each shipping container. Refer to specification documents for sample layouts.

4. Nutrition Facts, Ingredients and Allergen statements must be included on shipping containers when not required on the primary package. The ingredient statement must be listed separately from the name of the product, even for single-ingredient foods (e.g., Ingredients: ___). The allergen statement must comply with the Food Allergen Labeling and Consumer Protection Act (FALCPA) and the Food Allergy Safety, Treatment, Education, and Research Act (FASTER Act) which define milk, eggs, fish, Crustacean shellfish, tree nuts, wheat, peanuts, soybeans, and sesame as well as any food ingredient that contains protein derived from one of these foods, with the exception of highly refined oils, as “major food allergens.”; e.g. Contains:

5. UPC symbols/codes:

i. The UPC, symbol and code, called Interleaved 2 of 5 (I 2/5), must appear on each shipping container. The complete code, including the check digit, must be printed in machine and human-readable form. The start and stop indicators will be included in the bar codes. Printing, readability, and scanability of the bar code must be in accordance with UPC guidelines published by:

GS1 US Corporate Headquarters

Princeton Pike Corporate Center

1009 Lenox Drive, Suite 202

Lawrenceville, NJ 08648

Phone: 609.620.0200 https://www.gs1us.org/what-we-do/about-gs1-us

ii. USDA will provide unique processor identification codes for commodity contracts. This applies only to non-manufacturers of fruit and vegetable products without a corresponding commercial retail product.

(f) Obliteration of Markings. The contractor must prevent the appearance of these containers in commercial channels. Containers bearing Government contract markings, filled or unfilled, may cause the Government to incur expense in determining whether commodities have been diverted from authorized use and in answering inquiries. In cases of rejected products, overruns, or misprints, the contractor must obliterate official USDA markings that identify the container as part of a government contract.

(g) Inventory Control Information. The processor may add inventory control information (including barcodes) on the shipping container, provided it does not cover or conflict with labeling requirements.

452.211-78 Compensation for Delays in Delivery (Sep 2025)

(a) If the contractor cannot meet the Not-Later-Than (NLT) delivery date, they must notify the Contracting Officer immediately. If the delay is beyond the contractor's control, they must request an extension at least three business days before the NLT date. Failure to submit the request or denial of the extension request will result in liquidated damages per FAR clause 52.211-11. Extension requests submitted after the NLT date or delay requests due to weekends/Federal holidays will not be accepted. The request must include the following information:

1. Applicable, identifiable contract and contract line-item information;

2. Documentation evidencing the event and how that event is beyond the control or negligence of the contractor;

3. Estimated delivery dates that the product will be delivered; and

4. Any additional information requested by the contracting officer.

(b) If a contractor’s product is rejected, they must deliver an acceptable replacement by the NLT delivery date to avoid liquidated damages. If the replacement arrives after the NLT delivery date, liquidated damages will be assessed.

(c) When deliveries are made by contract carrier or vendor’s own vehicle, the date shown on the signed commercial bill of lading will be considered the date of delivery.

452.211-79 Unitization Requirements (May 2026)

(a) Unless otherwise specified by the Government, all shipments of packaged products must be unitized (palletized and stretch wrapped).

Pallets must be:

i. Constructed to facilitate the safe handling and transportation of the packaged product, as a unit, without loss or damage.

ii. A Number 2, four-way, reversible flush stringer with no broken runners or slats.

iii. Suitable for use in the shipment of food products.

Plastic stretch wrap must be:

i. Constructed of a plastic film which is to be stretched a minimum of 50 percent beyond its original length when stretched around the pallet load.

ii. Applied as tightly as possible around all tiers of the palletized shipping containers. The shipping containers must be held firmly in place by the stretch wrap.

Pallet loads must be:

i. Stacked in such a way as to minimize the amount that shipping containers overhang the edges of pallets.

ii. Blocked and braced or otherwise loaded into the conveyance in a manner that prevents shifting during transit.

If pallet exchange is desired, the contractor must arrange for pallet exchange with consignees.

USDA is in no way responsible for arrangement of pallet exchange.

452.211-80 Regulatory Requirements for Commodities and Packaging - International (May 2026)

(a) The commodity must conform to the applicable provisions of the "Federal Food, Drug, and Cosmetic Act" (21 U.S.C. 301 et. seq.), as amended, and the relevant regulations, including applicable Food Safety Modernization Act regulations (FSMA), and sections in the Public Health Security and Bioterrorism Preparedness and Response Act of 2002 (the Bioterrorism Act). The contractor must comply with all applicable Federal, State, and local laws, executive orders, rules, and regulations related to its performance under this contract.

(b) All containers and packaging materials must comply with Coalition of Northeast Governors (CONEG) model legislation. The combined concentration of lead, cadmium, mercury, and/or hexavalent chromium must not exceed 100 parts per million. Concentration levels should be determined using American Standard of Testing Materials test methods, as revised or Environmental Protection Agency test methods for evaluating solid waste, S-W 846, as revised.

542.211-81 Carrying Charges – International (May 2026)

(a) For f.o.b. vessel contracts (excluding bulk oils and tallow), if the Government fails to take delivery by the end of the delivery period for reasons beyond the contractor's control, the Government will pay carrying charges of 18 cents per metric ton per day. This starts the day after the delivery period ends and continues until the vessel presents a valid Notice of Readiness (NOR).

The vessel must have passed all inspections and be ready to load grain. The NOR must be presented during business hours (0900-1600 local time, Monday to Friday, and 0900-1200 on Saturday, excluding federal holidays or a holiday listed on the elevator tariff). NORs filed after hours will be considered presented on the next business day.

(b) For f.o.b. vessel contracts for bulk oil and tallow, if the Government fails to take delivery by the end of the delivery period for reasons beyond the contractor's control, the Government will pay a premium based on the actual (noncumulative) number of days the delivery period is exceeded until the vessel presents the NOR as follows:

If exceeded by 1, 2, 3, or 4 days, ½ of 1 percent of the f.o.b. price;

If exceeded by 5 or 6 days, 1 percent of the f.o.b. price;

If exceeded by 7 or 8 days, 1 ½ percent of the f.o.b. price;

If exceeded by more than 8 days, an additional premium of ¼ of 1 percent of the f.o.b. price for each day beyond 8 days.

(c) If the f.o.b. vessel contract contains multiple prices, the premium must be calculated on the weighted average of the contract prices.

Solicitation Information

Award Type

It is anticipated that a firm-fixed price purchase order will be awarded as a result of this synopsis/solicitation.

The Government intends to make one award from this solicitation. Therefore, to be considered responsive, contractors must submit pricing for all items.

Evaluation and Basis for Award

Evaluation Criteria

The provision at FAR 52.212-2, Evaluation—Commercial Products and Commercial Services is not applicable to this solicitation. In lieu of this provision, quotes will be evaluated in accordance with FAR 12.203 based on the criteria listed below. Award will be made to the offeror representing the best value to the Government.

Price:

The offeror shall provide pricing as requested in the attached SF1449. Any quantity price discounts and discounts for prompt payment should be included in this section. The offeror’s quotation will be evaluated in accordance with FAR 12.204, to determine if it is fair and reasonable.

Technical Acceptability:

The United States Department of Agriculture (USDA) has a requirement for the following items on a brand name or equal basis.

Item Part Number Nomenclature Manufacturer

1 GVF 2205-15

ORBIT LIFT 25FT TIER 4 KUB

DSL, HYDRO-DRIVE W/AXLE

SLIDE KIT

Gillison’s Variety

Fabrication Inc

2 G9 50894 TOOL BOX, ORBIT LIFT

Gillison’s Variety

Fabrication Inc

The salient characteristics of the electric cultivating tractor are listed in Attachment II - Specifications

Offeror’s providing “or equal” items shall include in their quotation descriptive literature such as illustrations, drawings, or a clear reference, such as a web site to information readily available to the

Contracting Officer showing that the items being quoted meets all salient characteristics. Merely stating that the items meet is not acceptable. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

The Technical capability will be evaluated to determine an overall rating of “acceptable” or “unacceptable”. To be considered technically acceptable, the quoted product must:

1. Meet or exceed all salient characteristics of the brand name product as specified in the solicitation.

2. Be clearly identified by brand name, make, and model number, or identified as an “equal” product.

3. Include sufficient descriptive literature or documentation (e.g., product specifications, datasheets, or brochures) to demonstrate how the proposed product meets or exceeds the required salient characteristics.

4. Be available for delivery within the timeframe specified in the solicitation.

Failure to provide adequate documentation or to meet the required salient characteristics will result in a determination of technical unacceptability, and the quotation will not be considered for award.

Past Performance:

The Government may utilize any references provided by the Contractor, along with information available from past contracts/orders with the USDA and any information found using sources such as Federal Government sources or the Contractor Performance Assessment Reporting System (CPARS) to determine if the Contractor has acceptable or neutral Past Performance. Past Performance will be evaluated using the following rating system:

• Acceptable: The contractor shows a demonstrated ability to meet contract requirements in prior or current contracts, including quality of work, timeliness, cost control, business relations, and adherence to contract terms.

• Neutral: Offeror does not have a past performance record.

• Unacceptable: The contractor has a documented history of failing to meet contract requirements, including poor quality, missed deadlines, cost overruns, lack of responsiveness, or unethical behavior.

Evaluation Method:

The Government will evaluate quotations based on the lowest price technically acceptable criteria.

Only the lowest priced offer will be evaluated for Technical Acceptability. Should the lowest priced offer not receive an acceptable technical or past performance rating, the process will continue in order of lowest priced offer until the lowest price, technically acceptable offer with acceptable or neutral past performance is identified.

(End of provision)

Delivery Information

F.o.b. destination, is requested as the F.O.B. point for all deliverables.

All offers will be considered F.O.B. Destination unless F.O.B. origin is specified AND estimated shipping costs are included.

The USDA requires delivery of all items by November 30, 2026. Early deliveries will be accepted.

Shipping Instructions:

Items shall be shipped to the following address:

USDA Pecan Breeding and Genetics

10200 FM 50

Somerville TX 77879

Qualification Requirements

Offerors, or the product or service, are not required to meet a qualification requirement to be eligible for award.

52.252-1 Solicitation Provisions Incorporated by Reference Feb 1998 This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52

52.212-1 Instructions to Offerors - Commercial Products and Commercial Services (Nov 2025)

FAR 52.212-1 is amended as follows:

Period for acceptance of offers.

The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers.

Questions Questions shall be submitted via email to theodore.blume@usda.gov and are due no later than September 10, 2026, at 1:00 PM Central Time. This will ensure enough time to respond before the solicitation period ends. Please include the solicitation name and number as the subject line of the email.

mailto:theodore.blume@usda.gov

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation (Jan 2017) 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations - Representation (Sep 2025) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Sep 2025) 52.240-90 Security Prohibitions and Exclusions Representations and Certifications (Nov 2025)

The following provisions are applicable if checked:

☒ 52.204-7 System for Award Management—Registration (Nov 2025)

☐ Alternate I (Nov 2025) to 52.204-7 ☒ 52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products (Feb 2021) ☒ 52.223-4 Recovered Material Certification (May 2008)

Full Text FAR Provisions

52.216-1 Type of Contract (Sep 2025)

The Government contemplates award of a firm-fixed price contract resulting from this solicitation.

52.225-6 Trade Agreements Certificate (Feb 2021)

(a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements."

(b) The offeror shall list as other end products those supplies that are not U.S.-made or designated country end products.

Other End Products:

Line-item No. Country of origin

[List as necessary]

(c) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for those products are insufficient to fulfill the requirements of this solicitation.

(End of Provision) 52.225-18 Place of Manufacture (Aug 2018)

(a) Definitions. As used in this provision—

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except-

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-

(1) □ In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) □ Outside the United States.

52.229-11 Tax on Certain Foreign Procurements – Notice and Representation (Sep 2025)

(a) Definitions. As used in this provision—

Foreign person means any person other than a United States person.

Specified Federal procurement payment means any payment made pursuant to a contract with a foreign contracting party that is for goods, manufactured or produced, or services provided in a foreign country that is not a party to an international procurement agreement with the United States.

For purposes of the prior sentence, a foreign country does not include an outlying area of the United States.

United States person as defined in 26 U.S.C. 7701(a)(30) means

(1) A citizen or resident of the United States;

(2) A domestic partnership;

(3) A domestic corporation;

(4) Any estate (other than a foreign estate, within the meaning of 26 U.S.C. 701(a)(31)); and

(5) Any trust if–

(i) A court within the United States is able to exercise primary supervision over the administration of the trust; and

(ii) One or more United States persons have the authority to control all substantial decisions of the trust.

(b) Unless exempted, there is a 2 percent tax of the amount of a specified Federal procurement payment on any foreign person receiving such payment. See 26 U.S.C. 5000C and its implementing regulations at 26 CFR 1.5000C-1 through 1.5000C-7.

(c) Exemptions from withholding under this provision are described at 26 CFR 1.5000C-1(d)(5) through (7). The Offeror may claim an exemption from the withholding by using the Department of the Treasury Internal Revenue Service (IRS) Form W-14, Certificate of Foreign Contracting Party

Receiving Federal Procurement Payments, available at www.irs.gov/w14. Any exemption claimed and self-certified on the IRS Form W-14 is subject to audit by the IRS. Any disputes regarding the imposition and collection of the 26 U.S.C. 5000C tax are adjudicated by the IRS as the 26 U.S.C.

5000C tax is a tax matter, not a contract issue. The IRS Form W-14 is provided to the acquiring agency rather than to the IRS.

(d) For purposes of withholding under 26 U.S.C. 5000C, the Offeror represents that

(1) It □ is □ is not a foreign person; and

(2) If the Offeror indicates "is" in paragraph (d)(1) of this provision, then the Offeror represents that—I am claiming on the IRS Form W-14 □ a full exemption, or □ partial or no exemption [Offeror must select one] from the excise tax.

(e) If the Offeror represents it is a foreign person in paragraph (d)(1) of this provision, then—

(1) The clause at FAR 52.229-12, Tax on Certain Foreign Procurements, will be included in any resulting contract; and

(2) The Offeror shall submit with its offer the IRS Form W-14. If the IRS Form W-14 is not submitted with the offer, exemptions will not be applied to any resulting contract and the Government will withhold a full 2 percent of each payment.

(f) If the Offeror selects "is" in paragraph (d)(1) and "partial or no exemption" in paragraph (d)(2) of this provision, the Offeror will be subject to withholding in accordance with the clause at FAR 52.229-12, Tax on Certain Foreign Procurements, in any resulting contract.

(g) A taxpayer may, for a fee, seek advice from the IRS as to the proper tax treatment of a transaction. This is called a private letter ruling. Also, the IRS may publish a revenue ruling, which is an official interpretation by the IRS of the Internal Revenue Code, related statutes, tax treaties, and regulations. A revenue ruling is the conclusion of the IRS on how the law is applied to a specific set of facts. For questions relating to the interpretation of the IRS regulations go to https://www.irs.gov/help/tax-law-questions.

AGAR Provisions

452.203-70 Anti-Discrimination and Diversity, Equity, and Inclusion (DEI) Certification (Dec 2025)

(a) By submission of its offer, the offeror certifies that:

(1) It is compliant with all applicable Federal anti-discrimination laws and the Equal Protection principles of the U.S. Constitution.

(2) Neither it nor any proposed subcontractor or teaming partner operates or funds any program, policy, or initiative that promotes DEI in a manner that violates any applicable Federal anti-discrimination laws, including but not limited to Title VI and VII of the Civil Rights Act of 1964, or the Equal Protection principles of the U.S. Constitution.

(b) If the offeror participates in, facilitates, or funds programs that implicate Title VI of the Civil Rights Act of 1964 or Title IX of the Education Amendments of 1972, as amended, including but not limited to grants to or for schools, colleges, universities, 4-H programs, non-governmental organization (NGO) programs, sports programs, and education-related grants to prisons or other detention facilities, by submission of its offer, the offeror certifies…