C - Statement of Work.doc

DOC document 302 KB Posted

Attached to
Small Business Set-Aside for Air Booster Pump Assembly Parts Fabrication Per the Attached Drawings and Statement of Work
Solicitation number
N61331-21-T-JK66
Issued by

View the file

Other files

File Type Posted
L - Questions and Answers for N61331-21-T-JK66.docx DOCX document
M - Clauses.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STATEMENT OF WORK FOR

AIR BOOSTER PUMP ASSEMBLY (ABPA) PARTS FABRICATION

1.0 SCOPE

The Naval Surface Warfare Center, Panama City Division, FL, (NSWC PCD) has a requirement for fabrication, verification, and delivery of parts to support and maintain Air Booster Pump Assemblies (ABPAs).

APPLICABLE DOCUMENTS

The following documents form a part of the Statement of Work (SOW) to the extent specified herein. In the event of conflict between the document reference herein and the contents of the SOW, the contents of the SOW shall take precedence. Second tier and lower reference documents (i.e. documents referenced in the primary references) shall be for guidance only.

Military Standards: None

Military Specifications: None

Other Documents:

ISO 9001-2015, Quality Management System dated 15 Sept 2015
Costal System Station Dahlgren Division Drawing 7245956 Revision F, Components, ABPA / HPFA
Costal System Station Dahlgren Division Drawing 7245955 Revision C, Frame Weldment
Costal System Station Dahlgren Division Drawing 7245952 Revision A, Cover, Rear
Costal System Station Dahlgren Division Drawing 7245951 Revision A, Cover, Front
Costal System Station Dahlgren Division Drawing 7245950 Revision B, Panel, Pump

REQUIREMENTS

Fabrication The Contractor shall provide all labor, equipment, parts, and consumables required to fabricate the following: Qty. 22 Panel, Control Qty. 22 Cover, Front Qty. 22 Cover, Rear Qty. 15 Frame Weldment, ABPA Qty. 44 Hinge Assembly Qty. 22 Stop, Mechanical Qty. 44 Shim Qty. 44 Clamp Assembly, Half, Outer Qty. 44 Clamp Assembly, Half, Inner

The parts listed shall be manufactured in accordance with the drawings listed in Section 2.3 Other Documents.

Quality

The Contractor shall have a quality management system in place that meets the requirements of ISO 9001-2015.

Workmanship

The Contractors workmanship shall ensure that surfaces of the finished fitting assemblies are uniformly finished and free from burrs, sharp edges, cracks, coarse marks, and processing materials.

Inspection and Acceptance Inspection and acceptance will occur at:

Naval Surface Warfare Center Panama City Division 110 Vernon Avenue Panama City, FL 32407

It is anticipated that acceptance or rejection will occur within two weeks after receipt of the items. The Contractor shall correct any deficiencies discovered during inspection.

GOVERNMENT FURNISHED PROPERTY (GFP)

Government Furnished Equipment: None

Government Furnished Material: None Government Furnished Information: None

5.0 DATA DELIVERABLES

Data shall be delivered in accordance with the attached Contract Data Requirements List (CDRL) DD Form 1423.

6.0 PERIOD OF PERFORMANCE

The items shall be delivered to NSWC PCD no later than twelve (12) weeks after award.

SECURITY

This effort is unclassified. The Contractor shall not require access to nor be required to generate or store classified information to perform this requirement.

RELEASE OF INFORMATION

Release of information shall be in accordance with Section I, Defense Federal Acquisition Supplement (DFARS) Clause 252.204-7000, Disclosure of Information.

All technical data provided to the Contractor by the Government shall be protected from public disclosure in accordance with the markings contained thereon. All other information relating to the items to be delivered or services to be performed under this contract shall not be disclosed by any means without prior approval of the appropriate NSWC PCD authority. Dissemination or public disclosure includes, but is not limited to, permitting access to such information by foreign nationals or by any other person or entity; publication of technical or scientific papers; advertising; or any other proposed public release. The Contractor shall provide adequate physical protection to such information to preclude access by any person or entity not authorized such access by the Government.

Controlled Unclassified Information (CUI)

Controlled Unclassified Information (CUI) is official information that requires the application of controls and protective measures for a variety of reasons and has not been approved for public release, to include technical information, proprietary data, information requiring protection under the Privacy Act of 1974, and Government- developed privileged information involving the award of contracts. CUI is a categorical designation that refers to unclassified information that does not meet the standards for National Security Classification under Executive Order 13526, but is (a) pertinent to the national interest of the United States or to the important interests of entities outside the Federal Government, and (b) under law or policy requires protection from unauthorized disclosure, special handling safeguards, or prescribed limits on exchange or dissemination.

Minimum Requirements for Access to Controlled Unclassified Information (CUI)

Prior to access, Contractor personnel requiring access to DON controlled unclassified information (CUI) or "user level access to DON or DoD networks and information systems, system security and network defense systems, or to system resources providing visual access and/or ability to input, delete or otherwise manipulate sensitive information without controls to identify and deny sensitive information" contractors must have clearance eligibility, or submit an Electronic Questionnaire for Investigation Processing (SF 86) to NSWC PCD Security for processing and subsequent adjudication by the DoD Consolidated Adjudications Facility.

Minimum Protection Requirements for Controlled Unclassified Information

Security classification guides and unclassified limited documents (e.g., CUI, Distribution Statement Controlled) are not authorized for public release and, therefore, cannot be posted on a publicly accessible webserver or transmitted over the Internet unless appropriately encrypted.

CUI

CUI is a document designation, not a classification. This designation is used by Department of Defense (DoD) and a number of other federal agencies to identify information or material, which although unclassified, disclosure to the public of the information would reasonably be expected to cause a foreseeable harm to an interest protected by one or more provisions of the Freedom of Information Act (FOIA). This includes information that qualifies for protection pursuant to the provisions of the Privacy Act of 1974, as amended. CUI must be marked, controlled and safeguarded in accordance with DoDI 5200.48, CUI

Security of Unclassified DoD Information on Non-DoD Information Systems (DoDI 8582.01) DoDPolicy

Adequate security shall be provided for all unclassified DoD information on non-DoD information systems. Appropriate requirements shall be incorporated into all contracts, grants, and other legal agreements with non-DoD entities.

Information Safeguards are applicable to unclassified DoD information in the possession or control of non-DoD entities on non-DoD information systems, to the extent provided by the applicable contract, grant, or other legal agreement with the DoD.

Information Safeguards

Unclassified DoD information that has not been cleared for public release may be disseminated by the Contractor, grantee, or awardee to the extent required to further the contract, grant, or agreement objectives, provided that the information is disseminated within the scope of assigned duties and with a clear expectation that confidentiality will be preserved. Examples include:

Non-public information provided to a Contractor (e.g., with a request for proposal).

Information developed during the course of a contract, grant, or other legal agreement (e.g., draft documents, reports, or briefings and deliverables).

Privileged information contained in transactions (e.g., privileged contract information, program schedules, contract- related event tracking).

It is recognized that adequate security will vary depending on the nature and sensitivity of the information on any given non-DoD information system. However, all unclassified DoD information in the possession or control of non- DoD entities on non-DoD information systems shall minimally be safeguarded as follows:

Do not process unclassified DoD information on publically available computers (e.g., those available for use by the general public in kiosks or hotel business centers).

Protect unclassified DoD information by at least one physical or electronic barrier (e.g., locked container or room, logical authentication or logon procedure) when not under direct individual control of an authorized user.

At a minimum, overwrite media that have been used to process unclassified DoD information before external release or disposal.

Encrypt all information that has been identified as CUI when it is stored on mobile computing devices such as laptops and personal digital assistants, compact disks, or authorized removable storage media such as thumb drives and compact disks, using the best encryption technology available to the Contractor or teaming partner.

Limit transfer of unclassified DoD information to subcontractors or teaming partners with a need to know and obtain a commitment from them to protect the information they receive to at least the same level of protection as that specified in the contract or other written agreement.
Transmit e-mail, text messages, and similar communications containing unclassified DoD information using technology and processes that provide the best level of privacy available, given facilities, conditions, and environment. Examples of recommended technologies or processes include closed networks, virtual private networks, public key-enabled encryption, and transport layer security.
Encrypt organizational wireless connections and use encrypted wireless connections where available when traveling. If encrypted wireless is not available, encrypt document files (e.g., spreadsheet and word processing files), using at least application-provided password protected level encryption.

Transmit voice and fax transmissions only when there is a reasonable assurance that access is limited to authorized recipients.

Do not post unclassified DoD information to website pages that are publicly available or have access limited only by domain or Internet protocol restriction. Such information may be posted to website pages that control access by user identification and password, user certificates, or other technical means and provide protection via use of transport layer security or other equivalent technologies during transmission. Access control may be provided by the intranet (vice the website itself or the application it hosts).

Provide protection against computer network intrusions and data exfiltration, minimally including:
Current and regularly updated malware protection services, e.g., anti-virus, anti-spyware.

Monitoring and control of both inbound and outbound network traffic (e.g., at the external boundary, sub- networks, individual hosts), including blocking unauthorized ingress, egress, and exfiltration through technologies such as firewalls and router policies, intrusion prevention or detection services, and host-based security services. Prompt application of security-relevant software patches, service packs, and hot fixes.

Comply with other current Federal and DoD information protection and reporting requirements for specified categories of information (e.g., medical, proprietary, Critical Program Information (CPI), personally identifiable information, export controlled) as specified in contracts, grants, and other legal agreements.

Report loss or unauthorized disclosure of unclassified DoD information in accordance with contract, grant, or other legal agreement requirements and mechanisms.

Do not use external IT services (e.g., e-mail, content hosting, database, document processing) unless they provide at least the same level of protection as that specified in the contract or other written agreement.

Operations Security

Operations Security (OPSEC) is concerned with the protection of critical information: facts about intentions, capabilities, operations, or activities that are needed by adversaries or competitors to bring about failure or unacceptable consequences of mission accomplishment. Critical information includes information regarding:

Operations, missions, and exercises, test schedules or locations;
Location/movement of sensitive information, equipment, or facilities;

Force structure and readiness (e.g., recall rosters);

Capabilities, vulnerabilities, limitations, security weaknesses;
Intrusions/attacks of DoD networks or information systems;

Network (and system) user IDs and passwords;

Movements of key personnel or visitors (itineraries, agendas, etc.); and
Security classification of equipment, systems, operations, etc.

The Contractor, subcontractors and their personnel shall employ the following countermeasures to mitigate the susceptibility of critical information to exploitation, when applicable:

Practice OPSEC and facilitate OPSEC awareness;
Immediately retrieve documents from printers assessable by the public;
Shred sensitive and Controlled Unclassified Information (CUI) documents when no longer needed;
Protect information from personnel without a need-to-know;
When promulgating information, limit details to that essential for legitimacy;

During testing and evaluation, practice OPSEC methodologies of staging out of sight, desensitization, or speed of execution, whenever possible.

8.0 DISTRIBUTION LIMITATION STATEMENTS

Technical documentation generated under this order shall carry the following distribution limitation statements. Word processing/electronic files shall have the statements included in the file such that the first page of any resultant hard copy shall display the statements. For drawings, the statements shall be as near to the title as possible without obscuring any detail of the drawing. Additionally, any electronic media (i.e. CD-ROM) delivered shall be marked externally with the statements.

DISTRIBUTION C – DISTRIBUTION AUTHORIZED TO US GOVERNMENT AGENCIES AND THEIR CONTRACTORS ONLY: ADMINISTRATIVE/OPERATIONAL USE, (DATE STATEMENT APPLIED). OTHER REQUESTS FOR THIS DOCUMENT MUST BE REFERRED TO COMMANDING OFFICER, NAVAL SURFACE WARFARE CENTER PANAMA CITY DIVISION, ATTN: CODE 107, 110 VERNON AVE., PANAMA CITY, FL 32407-7001.

DESTRUCTION - For unclassified limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of document.”

File details come from the government source that posted it. Updated .