BuoyRequirementsFY12.rtf

This is a buoy specifications document for a Fiscal Year 2012 procurement issued by the State of Maine for buoys to be used on various lakes and waters. The contract specifies two primary buoy types: 5-inch diameter buoys with 76 inches overall height for milfoil area marking, and 9-inch diameter regulatory buoys with 61 inches overall height. Both buoy types must feature internal concrete ballast, self-righting capability, seamless acrylonitrile-butadiene-styrene (ABS) construction, and rigid closed-cell urethane foam filling per MIL-P-21929 Class I specifications to ensure they are unsinkable. The 5-inch buoys require 42 inches of exposure without tackle and 36 inches with 5-pound tackle, while the 9-inch regulatory buoys must provide over 36 inches of exposure with 5-pound tackle. All buoys must feature galvanized steel hardware per ASTM A-153-73, standard inland waterway marking symbols, reflective bands, and permanent markings indicating State of Maine property ownership and manufacture dates. Milfoil area buoys must be solid yellow with yellow reflective tape, with all lettering and symbols being scratch and fade resistant.

The specifications establish strict material and construction standards without providing specific pricing terms, set-asides, or quantity requirements in this document. All metal hardware must be rust-proof and reinforced at stress points, with lettering and reflective bands ranging from 1 inch to 3 inches in width depending on buoy type. Vendors were required to submit questions through the designated Question and Answer link on the Solicitation Details View page, with responses posted in the same location for all interested bidders. The procurement required complete shipment of all ordered buoys upon delivery.