BullWheel Puller Tensioner V Groove Reconductor.pdf

Description/Specification BullWheel Puller Tensioner V-Groove Reconductor

(Similar to SHERMAN & REILLY PVT-6013)

BullWheel Puller Tensioner V-Groove Reconductor REQUIREMENTS FOR DSW:

This specification is intended to find a BullWheel Puller Tensioner V-Groove Reconductor to be used at multiple job site locations to help pull conductors for WAPA.

BullWheel Puller Tensioner V-Groove Reconductor (Or Approved Equal)

General Specifications:

Pulling Capacity: 13,000 lbs. per bullwheel set (Or Approved Equal) Tensioning Capacity: 8,000 lbs. per bullwheel set / Low force mode: min. 500 lbs., max.

2,900 lbs. / High force mode: min. 1,900 lbs., max. 8,000 lbs. (Or Approved Equal) Maximum Line Speed: Pulling: 4 mph (Or Approved Equal) Self-Loading Reel: 18,000 lbs. (Or Approved Equal) Rope Reel Capacities: 96 in. flange, 67 in. width (Or Approved Equal) Reel Shaft Diameter: 3 in. (opt. adapters for up to 5 in.) (Or Approved Equal) Drive System: Direct drive: hydraulic motor, bullwheel (Or Approved Equal) Drive System Engine: 174 Hp diesel, turbo-charged, CAT C4.4 ACERT L4, T4 final with

Webasto Arctic Pack (Or Approved Equal) Bullwheels: Nominal Diameter: 60 in. (Or Approved Equal) o Bullwheel Count: 2 (1 pair) (Or Approved Equal) o Bullwheel Groove Count: 5 per (Or Approved Equal) o Bullwheel Groove Radius: 1 in. (Or Approved Equal) o Groove Lining: Molded neoprene (Or Approved Equal) o Replaceable o V-Groove Max. Capacity: 2 in. (Or Approved Equal) o V-Groove Min. Capacity: 5/8 in. (Or Approved Equal)

Hardline: 17,000 ft. of 20 mm Anti-Twist Steel Cable / 17,800 lbs. total weight Rope:

17,500 ft. of .84 in. Unitrex / 17,800 lbs. total weight (Or Approved Equal)

Tension Brake: Hydraulic, motor-driven (Or Approved Equal) Brake Control: Hydraulic-applied, automatic, per operator setting (Or Approved Equal) Fuel Capacity: 12 gallons (Or Approved Equal) Hydraulic Fluid: ISO Grade 32 (Or Approved Equal)

Hydraulic Reservoir: 20 gallons (Or Approved Equal) Fail-Safe Brake: Spring-applied, released by hydraulic pressure (Or Approved Equal) Fairlead Rollers: 1 - tension bottom, 1 - V-Groove (Or Approved Equal) Operator’s Safety Enclosure: Safe-Zone® Cab, fully enclosed / single door (Or Approved

Equal) Frame Construction: Steel, continuous weld (Or Approved Equal) Length: (Overall, Nom.) 28 ft. (Or Approved Equal) Width: (Overall, Nom.) 8 ft., 6 in (Or Approved Equal) Height: (Overall, Nom.) 12 ft. (Or Approved Equal) Weight*: 25,500 lbs. nominal (Or Approved Equal) Max. Transport: 8,500 lbs. (Or Approved Equal) GVWR: 43,400 lbs. (Or Approved Equal) Suspension: Leaf-spring (Or Approved Equal) Axle Configuration: 2 - tandem axles, 22,500 lbs. per axle (Or Approved Equal) Wheel Configuration & Tires: Dual, 6,000 lbs. per wheel, 235/70R 17.5 (Or Approved

Equal) Brakes: (Trailer) Air brakes (Or Approved Equal) Towing Attachment: 3 in. adjustable pintle eye (Or Approved Equal) Tie Downs: 3/4 in. dia. D Ring, 7-ton capacity ea. (4) (Or Approved Equal) Tie Off Points: (2) at rear/ bumper, 12,000 lbs. (Or Approved Equal) Rear (R/L) Jacks: Hydraulic, with shoe (Or Approved Equal) Front/Nose Jacks: Hydraulic, with shoe (Or Approved Equal) Stabilizing Jacks: 2 horizontal folding jacks (Or Approved Equal) Electrical System: Split 12/24 VDC (Or Approved Equal) Battery: 2 - 12 V, 720 CCA, BCI group 93 (Or Approved Equal) Lights / Navigation: US DOT, LED, 12 VDC (Or Approved Equal) Grounding: 3/4 in. dia. Copper-clad Steel ground loops (4) (Or Approved Equal) Wheel Chocks: Standard (Or Approved Equal) Fire Extinguisher: ABC (Or Approved Equal) Color: S+R White (Or Approved Equal) Safety Chains: 2 - with hooks (Or Approved Equal) Electrical System: Split 12/24 VDC (Or Approved Equal) Lights, Work Site: Cab top floods (Or Approved Equal) Deck Cover: Aluminum deck, diamond plate (Or Approved Equal) PLC Machine Control: CANbus technology (Or Approved Equal) Data Logging: Removable / replaceable memory card (Or Approved Equal) PTO – Termination: 3,500 PSI Height pressure (Or Approved Equal)