BORING MACHINE COMBINED SYNOPSIS..docx

COMBINED SYNOPSIS/SOLICITATION for a Horizontal Boring Machine General Information

Contracting Office Address Red River Army Depot Directorate for Contracting 100 James Carlow Drive, Bld 735 Texarkana, TX 75505-5000 Contract Specialist: Lance Lamb,

(571) 588-1512, robert.l.lamb10.civ@army.mil

Description This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, “Streamlined Procedures for Evaluation and Solicitation for Commercial Items,” as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

This solicitation is a Request For Quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Regulations Circular - FAC Number: 2024-03 Effective Date: 02/23/2024

The associated North American Industrial Classification System (NAICS) code for this procurement is 333517 Engine Boring Machine with a small business size standard of 500 employees. This solicitation will result in one (1) contract. The contract will consist of a period of 3 months.

Basis for Award: See Provision at FAR 52.212-2 below.

Submission of Questions: Any questions regarding this RFQ must be received by March 18, 2024 at 1100 hrs. (11:00 AM Central Standard Time (CST). Questions shall be submitted by email Contract Specialist: Lance Lamb, (571) 588-1512, robert.l.lamb10.civ@army.mil & Contracting Officer at christopher.l.johnston20.civ@army.mil.

Responses to questions are not considered changes to the RFQ as the only way the RFQ can be modified is through an amendment that will be issued. Oral explanations or instructions given before the award of a contract will not be binding. Upon receipt of questions, the Government will provide answers to all questions by email. Contractors will be notified if an extension is needed to respond to the questions submitted.

Submission Due Date: All offers are due by March 21, 2024 at 1200hrs (12:00 PM CST). All responses received within this time frame will be considered by the government. Responses shall be submitted electronically to christopher.l.johnston20.civ@army.mil & robert.l.lamb10.civ@army.mil concerning this acquisition. Offeror must be registered in System for Award Management (SAM) prior to receiving an award. Refer to website https://www.sam.gov/portal/public/SAM/.

The Acquisition Services Division for Red River Army Depot at 100 James Carlow Drive, Bld 735 in Texarkana, TX is seeking to purchase Refuse Collection IAW PD.

All interested companies shall provide offers for the following:

Signature & Name/Title of person authorized to sign offer:

Offer Date - ___________________________

This action will be as awarded as 1 EA, Please break down Quote as listed below for a 1 Lot Total:

Machine (70% of TEP) $_______________________

Installation (10% of TEP) $_______________________

Start Up (10% of TEP) $_______________________

Training (10% of TEP) $_______________________

Total (%100) $_______________________

Total Evaluated Price __________________________

*Offeror shall include a breakdown of total cost in accordance with the associated CLIN number as well as list the combined price in the “Total Offered Price” space. The sum of CLINs 0001 shall equal the price entered in the “Total Evaluated Price” space.*

**Please note as exhibits uploaded with this Combined Synopsis Solicitation in SAM.gov.

Purchase Description (PD) CNC Automatic Programmable Hole-to-Hole Cylinder Boring Machine Rottler F10X or Equal For Red River Army Depot (RRAD)

1. Scope. This brand name or equal purchase description sets forth the minimum requirements for the purchase and turn-key installation of one (1) each Rottler model F10X (or equal) Computer Numeric Control (CNC) automatic programmable hole-to-hole cylinder boring machine. The machine shall be capable of performing automated cylinder boring operations for engine blocks such as the GM 6.5 liter series engines. The vendor shall supply tooling and accessories to allow boring of engine blocks in accordance with the specifications outlined in this PD. The vendor shall provide off-loading, unpacking, setup, and connection to all utilities at the installation location. Utilities will be provided within twenty (20) feet of the installation location. At the completion of the equipment installation, the vendor shall provide on-site operator training at RRAD.

0. Place of Performance. The items acquired via this contract shall be delivered, installed, and made fully operational at building 345 automotive machine shop at Red River Army Depot located at Texarkana, Texas 75507.

0. Period of Performance. The vendor shall furnish and install all equipment, accessories, tooling, and complete all training and technical requirements of this contract no later than three (3) months after the date of contract award.

0. Recognized Holidays. The contractor shall not perform on-site work on the following holidays:

2. New Year’s Day

2. Martin Luther King Jr.’s Birthday

2. President’s Day

2. Memorial Day

2. Juneteenth National Independence Day

2. Independence Day

2. Labor Day

2. Columbus Day

2. Veteran’s Day

1.3.10. Thanksgiving Day

1.4.1. Christmas Day (Including RRAD Christmas Shutdown)

1. General Requirements.

1. Item Condition. The items offered shall be new and a current production model. A current production model is defined as the manufacturer’s current production model which, on the date this solicitation is issued, has been designed, engineered and sold or is being offered for sale through advertisements or manufacturer’s published catalogue or brochures. Products such as a prototype unit, pre-production model, or experimental units do not qualify as meeting the requirements specified herein. The equipment shall be complete, so that when connected to the utilities identified herein, it can be used for any function for which it was designed and constructed.

1. General Safety. The equipment shall be fitted with safety devices or coverings for any parts that present safety hazards. The equipment shall include provisions to isolate and lock out all sources of hazardous energy, either input to the equipment or generated by the equipment, to ensure safety of operation and maintenance personnel.

1. General Standards Compliance. General compliance shall include, but not necessarily be limited to the following:

2. Occupational Safety and Health Administration (OSHA) 29 CFR 1910: Code of Federal Regulations, Occupational Safety and Health Standards

2. National Fire Protection Agency (NFPA) 70: National Electric Code (NEC), most current edition.

2. Vendor shall comply with all local, state, and federal safety, security, and environmental regulations.

1. Environmental Protection. The equipment shall be designed and constructed, so that under the operating service, transportation and storage conditions described herein, the equipment shall not emit materials hazardous to the ecological system as prescribed by federal, state, and local statutes in effect at the time of offer.

3. Compliance with Environmental Laws and Regulations: Contractor shall comply with all applicable federal, state, and local environmental laws, statutes, regulations, executive orders, permits, Army regulations (with supplements), as well as Major Subordinate Command (MSC) and installation regulation, policy, Host Tenant Agreement, Interagency Service Support Agreement, or Status-of-Forces Agreement. Contractor shall immediately report any conflicts between applicable federal, state, local environmental laws, statutes, executive orders, and provisions of Army Regulation 200-1, and any specifications within this contract to the Contracting Officer Representative (COR).

3. Conformance with Environmental Management System: Contractor shall take the necessary actions to identify, monitor, and control those contract operations and activities that pose risk of contamination, or can negatively impact the natural and/or human environment.

1. Lubrication. Means shall be provided to ensure adequate lubrication of all moving parts. If the design of the equipment includes a recirculating lubrication system, the system shall include a cleanable or replaceable filter.

1. Interchangeability. All parts of the end item shall be manufactured to standards and tolerances that will provide for the interchangeability of respective parts between end items of the same model without modification of the part or the equipment. All replacement parts shall be available commercially within the continental United States.

1. Controls. All mechanical, electrical, hydraulic and pneumatic operating controls required for operation shall be located convenient to the operator's work station(s).

1. Equipment Assembly. The equipment shall be constructed of parts that are new, without defects and free of repairs. The equipment construction shall include all components, parts, and features necessary to meet the performance requirements specified herein. All parts subject to damage from environmental hazards (such as dust, debris, or residue) shall be sealed or otherwise protected. The structure shall withstand all forces encountered during the operation of the equipment to its maximum rating and capacity without permanent distortion or failure.

1. Surfaces. All surfaces shall be clean and free of harmful or extraneous materials. All edges shall be either rounded or beveled unless sharpness is required to perform a necessary function. Except as otherwise specified herein, the condition and finish of all surfaces shall be in accordance with the manufacturer's commercial practices.

1. Measuring and Indicating Devices. All measuring and indicating devices such as dial indicators, pressure gages, temperature indicators, depth stops, scales, and other similar devices used on the equipment shall be graduated in the U.S. Customary System of Units (US). Markings on all measuring and indicating devices shall be permanently and legibly engraved or etched on a non-glare background. All dials and other type indicating devices shall be securely mounted in place.

1. Maintainability. The equipment shall be designed and constructed to permit maintenance personnel to easily service the equipment using a minimal number of tools. All parts subject to wear, breakage, or distortion shall be accessible for adjustment, replacement, or repair. Consistent with required maintenance and design of the equipment, the vendor shall provide any special tools required to service the unit. The equipment shall be equipped with access covers to facilitate inspection, cleaning, repair, or replacement of parts.

1. Technical Specifications.

2. Automated Cylinder Boring Machine Specifications – Rottler F10X or Equal. The vendor shall provide one (1) each automated CNC cylinder boring machine subject to the following minimum specifications:

0. Capable of automated boring, sleeving, counter boring, and blind hole machining of engine blocks such as GM 6.5 liter series of engines and similar

0. Control Method – CNC PC based touch screen with minimum 15” monitor. Machine shall use an operator interface system equivalent to the Rottler F10X system in order to maintain operator and maintainer familiarity with the control system.

0. Industrial PC with Windows based operating system

0. Cylinder Transition Method – Automated – Shall not require operator interaction to change cylinders within the same side of engine block.

0. Cylinder Diameter Range – Up to 7” minimum

0. Minimum X axis travel – 44”

0. Minimum Z axis travel – 15”

0. Shall include chip shield and dust collector

0. Display units in minimum .0001” resolution

0. Operation in American standard units of measurement (inch read)

0. Load monitoring to facilitate automatic shutdown during an overload condition

0. Electronic hand wheel for manual movement by operator

0. Spindle shall include quick change cutter head system

0. Automatic work head tilt system

0. Automatic computer monitored lubrication system

0. Spindle speed control shall be variable up to 1200 RPM minimum

0. Dimensions of the machine shall not exceed 52” Deep x 88” Wide x 88” Tall due to space requirements

2. Boring Machine Accessories. The vendor shall provide the below listed accessories designed for operation with the boring system in order to facilitate engine block boring. The provided accessories shall be compatible with the Rottler F10X machine model to facilitate use with existing equipment.

1. Triangular positive rake insert, 3/8”, 1/64” radius for general purpose and sleeving use – ten (10) each

1. Triangular positive rake insert, 3/8”, 1/32” radius for general purpose and sleeving use – ten (10) each

1. Square negative rake insert, 3/8”, 1/32” radius, black ceramic coated for high speed oversize through boring – ten (10) each

1. Clamp tower assembly for upper block work – one (1) each pair

1. Production V-Block fixture for use with 60 and 90 degree blocks with pneumatic clamping system and parallels – one (1) each

1. Universal 8” heavy duty T-slot parallels with air float – one (1) each

1. Production cutterhead, 3.25” – 5.00” to include digital micrometer – one (1) each. The cutterhead shall also include one (1) each of the following standard accessories in addition to the accessories listed above:

6. Triangular insert, ¼”, 1/64” radius for general purpose and sleeving use

6. Triangular insert, ¼”, 1/32” radius for general purpose and sleeving use

6. Triangular insert, positive rake, 3/8”, 1/32” radius for general purpose and sleeving use

6. Triangular insert, positive rake, 3/8”, 1/64” radius for general purpose and sleeving use

6. Centering finger set, 2-1/8”

6. Centering finger set, 2-5/16”

6. Centering finger set, 3-1/16”

6. Torx wrench for ¼” triangular insert tool holders

6. Torx wrench for 3/8” triangular insert tool holders

6. Triangular indexable insert tool holder, 3/8”, 3.08 – 3.48 diameter, 2.15” long

6. Triangular indexable insert tool holder, 3/8”, 3.48” – 3.88” diameter, 2.35” long

6. Triangular indexable insert tool holder, 3/8”, 3.88” – 4.28” diameter, 2.55” long

6. Triangular indexable insert tool holder, 3/8”, 4.28 – 4.68” diameter, 2.75” long

6. Triangular indexable insert tool holder, 3/8”, 4.68 – 5.08” diameter2.95” long

6. Universal digital micrometer assembly for ½” tooling

1. Square insert indexable tool holder, range 3.52” – 3.92” diameter, 2.35” long

1. Square insert indexable tool holder, range 3.92” – 4.32” diameter, 2.55” long

1. The vendor shall provide any other standard machine accessories required to facilitate boring of V-block engines such as the GM 6.5 liter family of engines and similar

1. Utilities. The boring machine shall operate from 208-240 Volts, 60 Hz, Single (1) Phase, maximum 25 amps – RRAD will provide power and air utility connection points within twenty (20) feet of the installation location.

1. Installation. The vendor shall provide a full turn-key installation of the boring machine system. This includes off-loading from shipment, unpacking, inspecting, assembling, moving the system into the installation area, leveling, and connection to all utilities. The vendor shall provide all equipment, tooling, and manpower to accomplish the installation. The boring machine shall be installed in building 345 first floor – automotive machine section.

1. Training. The vendor shall provide a factory representative that is thoroughly familiar with all aspects of the boring machine and accessories for the purpose of training RRAD personnel. The training shall be provided during the normal day shift working hours of RRAD. The training shall include machine operation, programming, preventative maintenance, and troubleshooting. The training shall be provided for a minimum of one (1) working day at RRAD. RRAD will provide engine blocks to be used during training. The training shall begin within two (2) weeks of installation completion.

1. Warranty. The items furnished under this contract shall be guaranteed for a period of one (1) year, against defective materials, design, and workmanship. Upon receipt of notice from the Government of failure of any part of the system during the warranty period, that part or parts shall be replaced promptly with new parts at the expense of the vendor. The vendor shall provide installation services for replacement items during the warranty period. The warranty is to begin upon final acceptance by the Government.

1. Final Acceptance. The Government will examine the equipment supplied during the training portion of this contract to determine technical compliance. Technical compliance is defined as observing acceptable technical operation of the boring machine and accessories during block boring operations.

1. Technical Data. The vendor shall provide a complete set of manufacturer’s technical data for the boring machine system. The technical data shall include at a minimum:

8. User operation procedures

8. Preventative maintenance procedures

1. Itemized Listing. The vendor shall provide a detailed itemized listing of the proposed contents of the complete system at the time of offer. The itemized listing shall be detailed to allow the Government to determine compliance with the technical requirements described in this PD.

The full text of FAR provisions or clauses may be accessed electronically at http://acquisition.gov/comp/far/index.html.

The following solicitation provisions apply to this acquisition:

1. FAR 52.212-1, “Instructions to Offerors–Commercial Items” (SEP 2023). This solicitation will result in only one (1) award.

2. FAR 52.212-2, “Evaluation-Commercial Products and Commercial Services” (NOV 2021)

3. FAR 52.212-3, “Offerors Representations and Certifications–Commercial Items” (SEP 2023)

4. FAR 52.204-9, “Personal Identity Verification of Contractor Personnel.” (NOV 2023) Contractor and all associated sub-contractor employees shall comply with adjudication standards and procedures using the National Crime Information Center interstate identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05/AR 190-13), applicable installation, facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

Offerors must complete annual representations and certifications electronically in the System for Award Management (SAM) accessed through https://www.sam.gov in accordance with FAR 52.212-3, “Offerors Representations and Certifications–Commercial Items.”

PROVISIONS INCORPORATED BY FULL TEXT:

Instructions, Conditions, & Notices to Offerors FAR 52.212-1 Addendum, Instructions to Offerors A-1. Period for Acceptance of Offers IAW FAR 52.215-1(d). The offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers.

A-2. To ensure timely and equitable evaluation of offers, offerors must follow the instructions contained herein. Offers must be complete, self-sufficient, and respond directly to the requirements of this solicitation. A complete quote consists of two (2) parts: Part I - Price and Part II - Technical. Failure to furnish a complete offer may result in the offer being determined unacceptable by the Government. Response to this solicitation (including both parts) must be submitted by the due dates specified in this Combined Synopsis Solicitation. The signed Combined Synopsis Solicitation document must be submitted electronically to all individuals listed below. Receipt of your electronic submittal will be acknowledged via return email; if you do not receive an acknowledgement, you are advised to call for confirmation as firewall protections may block emails and/or strip attachments. Contact information is as follows (Email is highly suggested):

Contracting Officer: Christopher L. Johnston , christopher.l.johnston20.civ@army.mil Contracting Specialist: Robert L. Lamb, robert.l.lamb10.civ@army.mil

A-3. Specific Instructions:

A-3.1 PART I, Price. Offerors are asked not to alter the electronic version of this Combined Synopsis Solicitation other than to fill in pricing information. In particular, offerors are asked not to delete page breaks or to alter headers/footers.

A-3.1.1 Page 2 of this Solicitation - Complete the items listed below. In doing so, the offeror accedes to the contract terms and conditions as written in the solicitation, to include attachments. The solicitation constitutes the model contract.

Discount terms (Payment terms such as Net 30) Name/POC/address of offeror (code = cage code; facility code=Unique Entity ID) Total Evaluated Price Signature: Name/Title of person authorized to sign offer Offer Date For each contract line number (CLIN) on page 3 of this document insert quoted total price on blank as a EA total. To prevent rounding issues, unit prices are to be rounded to the nearest whole dollar.

Note: It is the responsibility of each offeror to verify their calculations.

Interchanges: The Government may conduct interchanges with one, some, none, or all vendors at its discretion.

A-3.2 PART II, Technical. Offerors shall prepare and submit a technical quote by the date/time stated in the “Submission Due Date” on Page 2 of this Combined Synopsis Solicitation. Offerors shall provide sufficient information to allow the Government to judge the offeror's technical capability to perform the requirements of this Combined Synopsis Solicitation. The basis of the offeror's technical quote is the Purchase Description titled “PD CNC Automatic Programmable Hole-to-Hole Cylinder Boring MachineF Rottler F10X or Equal ” of this Combined Synopsis Solicitation. The offer must adhere to the specifications and characteristics listed.

(End of 52.212-1 Addendum)

Evaluation Factors for Award FAR 52.212-2 Addendum, Evaluation Methodology B-1 BASIS FOR CONTRACT AWARD: This requirement will be awarded to the responsible offeror whose quote conforming to the solicitation is determined to represent the best selection for the Government based on meeting price and technical acceptability. This acquisition is being conducted in accordance with FAR Part 13 Simplified Acquisition Procedures. By submission of its offer, the offeror accedes to all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors or sub factors. The offeror accedes to the terms of this model contract and all such offers shall be treated equally except for their prices and technical evaluation. An "unacceptable" rating in any factor will result in the overall technical quote being rated "unacceptable" and the quote will therefore be ineligible for award. The Government may at its discretion also utilize information available from Government Past Performance collection systems to compare offerors and use this information as a discriminator when identifying the offer that represents the best selection. Quotes will be evaluated using FAR 13.106-2 procedures which permit comparative evaluation of offers. While the Government will strive for maximum objectivity, the selection process is by its nature subjective. Therefore, professional judgment is implicit throughout the entire process. The evaluation process shall proceed as follows:

The following documents will be evaluated for completeness and compliance with the requirements of the RFQ. Please refer to the instructions in 52.212-1 Addendum. Incomplete items may be a basis for rejection:

1. Part I, Price

(a) Signed copies of this Combined Synopsis Solicitation document. Is this Combined Synopsis Solicitation document completed and signed by an official authorized to bind the company?

(b) Combined Synopsis Solicitation document. Is the price as EA and Company information on page 2 & 3 accurately and completely filled in by the offeror?

(c) Solicitation Amendments (if applicable). Did the offeror acknowledge all amendments to the RFQ?

(d) System for Award Management (SAM) Registration. Has the offeror completed SAM registration and is the registration active? (Government will validate via SAM website)

2. Part II, Technical The quote shall consist of a detailed breakdown showing how all of the performance requirements listed in the Purchase Description titled “PD CNC Automatic Programmable Hole-to-Hole Cylinder Boring Machine Rottler F10X or Equal listed in section 3 titled Technical Specifications.” of this Combined Synopsis Solicitation, will be met.

B-2 PRICE EVALUATION. Quotes will be ranked from lowest to highest Total Evaluated Price (TEP). An offeror's Total Evaluated Price will be determined by totaling the Amount for all CLINs. Offerors shall enter the TEP on Page 2 & 3 of this Combined Synopsis Solicitation document. The offeror is responsible for ensuring that the value listed as the TEP is the total of all CLINS provided in the solicitation. (Note: To prevent rounding discrepancies, please ensure unit prices used for calculation are rounded to the nearest whole dollar. It is the responsibility of each contractor to verify his or her calculations.

B-3 TECHNICAL EVALUATION.

The Government's technical evaluation shall evaluate the technical quotes on a pass/fail basis, assigning a rating of Acceptable or Unacceptable. An offer must be rated "acceptable" in order to be eligible for award. An "unacceptable" rating will result in the overall technical quote being rated "unacceptable" and the quote will therefore be ineligible for award. The Government will utilize the information provided by the offeror, along with information collected from other sources (i.e., other Government offices, commercial sources, etc.), in making a technical acceptability determination. If an Offeror's technical quote is determined to be Technically Unacceptable, no further evaluation will be conducted. Offerors determined to be technically unacceptable shall be eliminated from consideration for contract award.

Offers must be determined technically acceptable in the following areas to be eligible for award:

1. Offered capability meets the requirements in accordance with the Performance Work Statement titled “PD CNC Automatic Programmable Hole-To-Hole Cylinder Boring Machine Rottler F10X or Equal ” of this Combined Synopsis Solicitation.

TECHNICAL RATINGS

1. Acceptable - The offeror's quote meets the minimum requirements stated in the Performance Work Statement titled “PD CNC Automatic Programmable Hole-To-Hole Cylinder Boring Machine Rottler F10X or equal of this Combined Synopsis Solicitation.

2. Unacceptable - The offeror's quote fails to meet the requirements stated in the Performance Work Statement titled “PD CNC Automatic Programmable Hole-To-Hole Cylinder Boring Machine Rottler F10X or equal of this Combined Synopsis Solicitation.

B-4 CONTRACT AWARD. The Government intends to award, without discussion, to the offeror whose quote represents the best selection for the Government based on meeting price and technical acceptability. Offerors are cautioned to submit sufficient information and in the format specified in 52.212-1 Addendum. Offeror's may be asked to clarify certain aspects of their quote. Communication conducted to resolve minor or clerical errors will not constitute discussions and the Contracting Officer reserves the right to award a contract without the opportunity for quote revision. The Government intends to award a contract without interchanges with respective offerors. The Government, however, reserves the right to conduct interchanges with one, none, or all offerors if deemed in its best interest.

The Government retains the right to cancel this Request for Quote at any time prior to contract award.

B-5 CONTRACTOR RESPONSIBILITY. Prior to an award, an offeror may be requested to provide business information for the purpose of a responsibility determination in accordance with FAR Part 9. Failure to provide requested information may result in a determination of non-responsibility, and the offeror would then be considered ineligible for award.

(End of 52.212-2 Addendum)

FAR Clauses Incorporated by Full Text 52.212-2 Evaluation-Commercial Products and Commercial Services. Nov 2021 As prescribed in 12.301(c), the Contracting Officer may insert a provision substantially as follows:

Evaluation-Commercial Products and Commercial Services (Nov 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

See Addendum FAR 52.212-2 Evaluation

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

The following solicitation clauses apply to this acquisition:

1. FAR 12.603(c)(2)(xiv) “Defense Priorities and Allocations System (DPAS) and assigned rating”

2. FAR 52.212-4, “Contract Terms and Conditions-Commercial Products and Commercial Services”

3. FAR 52.212-5, “Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services” The following subparagraphs of FAR 52.212-5 are applicable:

Indicate which FAR clauses listed in FAR 52.212-5 will be applicable, e.g., subparagraph (b)(4), (b)(8),(b)(29),(b)(30)(i),(b)(31)(i),(b)(35)(i),(b)(44),(b)(51),(b)(60).

52.209-10 “Prohibition on Contracting with Inverted Domestic Corp Nov 2015 52.232-39 Unenforceability of Unauthorized Obligations Jun 2013 52.247-34 FOB Destination Nov 1991 52.252-1 Solicitation Provisions Incorporated By Reference Feb 1998 252.203-7000 Requirement Relating to Compensation of Former DOD Officials Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights Sep 2013 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting Dec 2019 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports Dec 2018 252.232-7010 Levies on Contract Payments Dec 2006 252.211-7003 Item Unique Identification and Valuation Mar 2022 252.232-7006 Wide Area Workflow Payment Instructions (Dec 2018)

All quoters shall submit the following: One copy of Quote to include all required exhibits, technical description of the item(s) being offered in sufficient detail to evaluate compliance with the requirements in the solicitation, and one of the statements listed below to expedite the award process.

All Quotes shall be sent thru email to robert.l.lamb10.civ@army.mil

This is an open-market combined synopsis/solicitation for commercial products as defined herein. The government intends to award a contract as a result of this combined synopsis/solicitation that will include the terms and conditions set forth herein. To facilitate the award process, all offers must include a statement regarding the terms and conditions herein as follows:

"The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition."

OR

"The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:"

Offerors shall list exception(s) and rationale for the exception(s).

Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Contract Specialist, Lance Lamb, at robert.l.lamb10.civ@army.mil & Contracting Officer, Christopher Johnston, at christopher.l.johnston20.civ@army.mil

Point of Contact

Contract Specialist Lance Lamb

(571) 588-1512 robert.l.lamb10.civ@army.mil

Contracting Officer Christopher Johnston

(571) 588-1511 christopher.l.johnston20.civ@army.mil