Boat_Salient_Characteristics.xlsx

XLSX spreadsheet 14 KB Posted

Attached to
SOURCES SOUGHT - SPECIALIZED BOAT Federal contract opportunity
Solicitation number
FA481923QA100
Issued by
Department of the Air Force Air Combat Command

About this file

This document outlines the salient characteristics for a specialized boat to be procured by the Department of the Air Force Air Combat Command. Key specifications include a 32-foot center console boat with a 24-degree deadrise and 114-inch chine beam, powered by twin 400-horsepower outboard engines. Additional details cover fuel and steering systems, welded features, cabin layout with a walk-around design, upholstery, rigging, electrical system, navigation equipment including GPS, sonar and radar, and other outfitting. The related pre-solicitation notice indicates the Air Force will seek information from potential sources for this specialized boat through solicitation number FA481923QA100.

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Sheet1

Boat w/ Walk Around Pilothouse (TWIN Outboard)
CENTER LENGTH:32'
DEADRISE:24 degrees
CHINE BEAM:114
BEAM:10'
SIDE HEIGHT44"
FUEL CAPACITY:250 gallons
2 year limited Government / Commercial hull warranty for this contract.
Vessel to be built to USCG and ABYC Standards unless otherwise noted
ENGINES
MOTOR2024400 horsepower
MOTOR2024400 horsepower
MOTOR
MOTOR
ENGINE OPTIONS
PROPELLERS - STAINLESS (3-blade) props, (1-standard rotation & 1-counter rotation) for 5.7L, V10 outboards
TWIN (V8) OUTBOARD DTS RIGGING & INSTALLATION - (with standard hydraulic steering) Includes: DTS, dual binnacle shift / throttle control, Tie bar kit, main engine wiring harnesses, twin engine keyswitch & all necessary installation hardware and wiring.
Shift / Throttle Control: DTS, DUAL BINNACLE, Digital Electronic Control (DEC) dual binnacle shift / throttle control S/N:
Twin Engine Key Switch and key switch panel with emergency stop lanyard : twin engine key switch kit including start / stop panel
Battery Isolator leads - charge leads for each outboard to replenish batteries while underway.
STEERING AND FUEL SYSTEMS
STEERING SYSTEM: DUAL RAM, hydraulic steering w/stainless steering wheel
Tim Tabs: 12" x 12" Aluminum Trim Tab (12v) Trim Tabs w/ Trim position indicator switch panel located at dash where easily reached and operated.
Fuel Tank: 250 gallon (.250", 5086 aluminum) with appropriate interior tank baffles, neoprene rubber and seaboard isolation mounting beds and brackets to prevent tank movement while underway. (2) 3/8" pickup fittings,

(2) 5/8" vent fittings, 1.5" fill pipe, electric fuel level sending unit and analogue gas gauge located on helm console. Deck plates to access tank fittings as needed. Tank access for removal via "soft patch" deck plate over entire fuel tank. Soft patch removal done with common hand tools. Tank installation and components comply with ABYC and EPA standards in effect at time of manufacture. (Fuel capacity will vary slightly.)

Fuel / Water separators: (Qty. 2) fuel filters with low point drain & clear sight bowls.
WELDED FEATURES
Offshore Bracket for TWIN 400 hp. outboard engines. (Qty. 1) (Oval) lift-out inspection hatch located / centered between outboard engines.
Self-bailing Decks: (.190") , non skid surface on deck. Oversize, through transom deck drains w/ Mechanical "flapper" style non-return valves
Topside (CENTERED) Transom Storage compartment - Aluminum "SHOEBOX LID" at rear cowling (QTY 1) with oversized drains to run overboard, out transom
STERN RAILS: Transom Rails: Custom length / height, (1.25" Sched. 40) rails at transom area, approx. 6" tall from transom surface.
AMIDSHIP RAILS: (1.25" Sched. 40): Custom length / height, rails alongside cabin area, approx. 6" tall from gunwale surface.
BOW RAILS: (1.25" Sched. 40): Custom length / height, rails FORWARD OF cabin area, approx. 6" tall from gunwale surface.
Rub Rails - (2 per side, Port & Starboard); welded aluminum rub rails, extend from transom to approximately curve of bow on hull sides for dock / pier protection.
BOARDING DOOR (SIDE / STARBOARD), Hinged, Inboard swinging boarding door - Latches closed w/ bullet- style latch.
Tow Bitt AFT - 3" Schedule 80 welded aluminum tow post with single (solid) cross-pin and welded cap.
CLEATS - (Qty. 6) 10" Cast aluminum, open base cleats. (welded) w/ backing plates.
CABIN / CONSOLE
WALK AROUND CABIN - 9' Cabin Length (Approx.length.) 1-PIECE WINDSHIELD, Full 360 "Walk Around" cabin with 1-sliding door starboard next to Operator and 1- sliding door located next to navigator / companion poistion. CABIN TO HAVE CANVAS BACK-DROP CURTAIN ENCLOSURE, WITH CENTER ROLL-UP DOOR. (eisenglass

windows on top half of canvas back-drop)

Shortened Cuddy Trunk, forward of winshield to allow for extra gear storage, rigging components.
Roof drain system - guttered drain system removable drain covers and channel drains that route water to either channels or railing and onto gunwales/overboard.
Aft Cabin overhang to extend approx. 30"
OVERHEAD ELECTRONICS BOX: Electronics box overhead / forward cabin. Sized to fit engine display, switch panel, and accessories overhead. Port side above helm to be left open.
Cabin side railing above windows - angle cut stanchions so they are tapered downwards to be easier to grab.
Roof top vent hatches – 9.5” x 9.5” (QTY 2) located over operator and navigator positions
UPHOLSTERY AND CANVAS
Operator / Captain's seat - shock mitigating seat with height adjust, swivel and fore/aft slide with NR-2 Captain's Chair. Installed on seat riser / box.
Navigator / Companion seat - shock mitigating seat with height adjust and fore/aft adjustment with NR-2 Captain's Chair. Installed on seat riser for proper seat height.
Aft Bench seats (BOTH PORT AND STARBOARD SIDES) w/ cushioned lids and storage beneath - (Starboad side cabin as space/length allows aft of small work station/storage cabinet)
OUTFITTING - RIGGING
Anchor / Rhode Kit - 300' of 5/16" anchor line w/ 20' of 1/4" anchor chain. Includes swivels and is spliced and ready for use.
Fire Extinguisher: 340 Dry Chemical Extinguisher - Class 3-A:40-B:C 1 mounted behind STBD aft seat box 1 mounted fwd in/near cuddy
Fire Extinguisher: 110 twin pack, mounted behind STBD aft seat box 1 mounted fwd in/near cuddy
OUTFITTING - ELECTRICAL
USCG approved Navigation / Lighting package (LED Light package): Navigation and Anchor lights LED - Anchor light to be mounted on aft section of light mast switched at dash
12v Electrical panel and ALL 12v wiring systems for Vessel. ALL VESSEL WIRING TO COMPLY WITH ABYC STANDARDS. (Panel includes 26 circuits + main)
Windshield wipers (1-per side, w/ independent motors). Wipers to have automotive style washer fluid system and holding tank. Wipers controlled by Independent wiper switches.
HORN - Stainless, (12v) dual trumpet horn installed on cabin roof. Momentary switch at dash.
• 12-volt power points (Qty. 2)
• BILGE PUMP(s): (Qty. 1) 2000 GPH RULE bilge pumps with auto switch. (RULE 3-way switch located on dash; ON / OFF / Auto) pump located forward of water tight bulkhead.
• BILGE PUMP(s): (Qty. 2) 3700 GPH RULE bilge pumps with auto switch. (RULE 3-way switch located on dash; ON / OFF / Auto) pump located aft in Offshore bracket.
Cabin Fans; (Qty. 3) 3-speed cabin fans (switched at fan) located in forward cabin corners & 1- located aft up ceiling corner.
BATTERIES: (Qty. 2) Group 27 deep cycle marine batteries w/ breaker switch for outboards, and (Qty. 1) Group 27 deep cycle battery for "house" battery system.
SHORE POWER - , 30 amp with cord set, Magnum 2000w Inverter & 4 Bank system with battery charger: Includes: 1 ea. 120v AC panel, ELCI CB-DP 30 amp, GFCI 15 amp recpt, 15 amp recpt. Guest 30 amp galvanic isolator, inlet 30 amp 125v & cord set 4 Bank battery charger & 1 Additional Grp 27 battery (house battery)
Raw Water Washdown system - (spigot) Located aft / Port corner w/ QD fitting. Includes Coil hose w/ trigger nozzle.
Exterior Courtesy Lights - (Qty. 8) floor lights to illuminate deck floor at night / morning operations
Interior Courtesy Lights: (Qty. 6 total) Red LED, oblong lights installed on port & starboard sides of center aiselway and

(2) on dash bulkhead.

Flood Lights - (Qty. 4) (18w) LED floodlights, installed (2-aft facing and 2-forward facing) forward lights switched together and aft lights switched together.
ELECTRONICS & NAVIGATION SYSTEMS
Compass - (3") CombiDial compass installed in dash area where it will not interfere with electronics
Main Display GPS/SONAR - (Qty. 1) chartplotter, GPS, radar, autopilot and video. (12") multifunction color display, 6-core processor touch screen with nano-coating technology and charts for East Coast / Florida area

a. Includes: remote GPS antenna. INSTALLED (FLUSHMOUNTED, in dash where easily seen)

Radar - CHIRP Pulse compression radar, collision avoidance, true trails, automatic target acquisition and tracking, doppler / dome radar range 24nm
VHF RADIOS - (Qty. 2) fixed mount 25W - Black VHF w/NMEA2000 intergration w/DSC Hailer HORN: (Includes: VHF Antenna heavy duty construction with center-fed 1/2-wave coaxial sleeve - 4 ft, 3 dB)
Law Enforcement Package - (100w) loudspeaker all-weather nylon composite housing with front loaded, powder coated speaker driver, 112 waterproof amp, weatherproof siren control/switch panel.
Non-skid surfaces:Charcoal non-skid on all walking surfaces
OTHER (SPARES, TESTING, CERTIFICATIONS, DRAWINGS, DELIVERY)

File details come from the government source that posted it. Updated .