Boat bay SOW.docx
DOCX document 16 KB Posted
- Solicitation number
- 30368QR250000005
About this file
This document is a Scope of Work (SOW) for an epoxy floor restoration project at the United States Coast Guard Station in Philadelphia. The project involves comprehensive floor renovation of a 1,700 square foot boat bay located at 1 Washington Ave., Philadelphia, PA 19147. The detailed scope includes surface preparation steps such as thorough cleaning, crack filling with polyurea, concrete grinding to ensure proper coating adhesion, moisture and humidity checks, application of an epoxy coating system with color flake broadcast, and a final polyaspartic clear topcoat application.
The solicitation (Number 30368QR250000005) is managed by the Department of Homeland Security's US Coast Guard, with Contracting Officer Alejandro Villarreal as the primary contact. Site visits are strongly recommended, and the unit's point of contact is MKC Michael Cooper. The project requires precise surface preparation and coating application, with a focus on creating a durable, professionally finished floor surface for the boat bay facility. Contractors interested in the opportunity should carefully review the detailed technical requirements and contact the listed government representatives for additional information or clarification.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Scope of work Project: Station Philadelphia Boat Bay floor restoration/Epoxy Address: 1 Washington Ave. Philadelphia, PA 19147 Client: United States Coast Guard I. Project Overview This scope of work details the renewal of the station’s boat bay. Total boat bay square footage is approx. 1700sqft. The work includes grinding, filling, and laying new flake epoxy with a grit topcoat.
II. Detailed overview.
• If needed, utilize traffic cones and yellow tape to properly restrict access to the working areas.
• Thoroughly clean the floor to remove any dirt, oil, grease, or other contaminants. Use a degreaser if necessary.
• Fill any cracks or holes with polyurea crack filler and allow it to cure. (if included in the above scope of work)
• Using our commercial grade concrete grinders, grind to a surface profile of 2 to 3. This ensures proper adhesion of the coatings system. (1/16"depth)
• Conduct a moisture & humidity check before application process begins.
• Apply epoxy coating system to concrete floor, followed by a heavy broadcast flake of color. Shave flakes and clean up all debris.
• Apply topcoat of polyaspartic clear to all surface areas.
• Once complete, perform final inspection and make any necessary touch ups before leaving the jobsite.
Attached Documents - Scope Of Work, FAR Clauses If you have any questions about this solicitation please contact the Contracting Officer, Alejandro Villarreal via e-mail. Contact info is listed below.
(830)446_8015 Alejandro.l.Villarreal@USCG.MIL 52.232-18Availability of Funds.
SITE VISITS ARE STRONGLY RECOMMENDED
Unit Point of Contact at STA Philadelphia is MKC Michael Cooper (440)554-6007 Michael.T.Cooper@USCG.MIL
File details come from the government source that posted it. Updated .