Bid Packet - IFB REV.pdf

PDF 8 MB Posted

Attached to
#24-85706, Fort Barfoot 2600 Area Barracks Flooring Replacement Project
Solicitation number
70078
Issued by
Nottoway County, Virginia

About this file

This document is an Invitation for Bids (IFB) issued by the Commonwealth of Virginia Department of Military Affairs for the #24-85706, Fort Barfoot 2600 Area Barracks Flooring Replacement Project. The project involves replacing floors in five (5) barracks buildings, T2620, T2621, T2622, T2623, and T2626, located at Fort Barfoot. The work includes removing and disposing of existing VCT flooring and underlayment, and installing new LVT flooring. A mandatory pre-bid conference will be held on June 25, 2024 at 11:00AM. Bids are due by 1:00PM on July 16, 2024, with a public bid opening on July 17, 2024. The contract shall be awarded on a lump sum basis, with the total base bid amount determining the award. The time for substantial completion is 120 calendar days, with final completion within 30 days after substantial completion.

The bid form requires pricing for each of the five barracks buildings as separate line items, with a total base bid amount. No bid bond is required, but the contractor must provide a certificate of builder's risk insurance. There are no prevailing wage rate requirements for this project. The work is to be performed during the facility's normal operating hours of Monday through Friday, 7:00AM to 4:30PM, with alternate work hours available with one week's notice.

View the file

Other files

File Type Posted
BID FORM.pdf PDF
Question Form for IFB.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DGS-30-256

(Rev. 03/20)

Notice of Invitation for Bids Page 1 of 2

NOTICE OF

INVITATION FOR BIDS (IFB)

Sealed bids are invited for the #24-85706, Fort Barfoot 2600 Area Barracks Flooring Replacement Project.

The general work description of the project can be generally described as replacing floors in five (5) barracks buildings, T2620, T2621, T2622, T2623, and T2626 located along one street of Fort Barfoot. Furniture is to be removed and stored so that the work can take place. The existing VCT flooring and its underlayment are to be demolished and disposed of. Shoe molding shall also be removed. New black felt paper and underlayment shall be installed over existing underlayment. A thinner underlayment may be required at the second floor rear doors to allow door swing clearance. A threshold strip will required between this area and the rest of the barracks flooring. An accepted adhesive product by the flooring manufacturer shall be applied.

The LVT flooring product, Armstrong Parallel USA 20, shall be installed in corridors, leader rooms, mop receptor room, and barracks sleeping areas. The color and thickness shall be J5115, Glendale Oak Scotch

Mist, 2.5 mm thick. Shoe molding shall be installed back in place. New molding, including around columns, shall be painted to match adjacent trim in Sherwin Williams color Network Gray. Thresholds shall be installed back in place and caulk shall be applied as needed. All furniture will be returned in accordance with a layout to be conveyed by DPW.

Due to manpower and mail uncertainty - Sealed bids will be received at the front entrance of the office of the Directorate of Public Works, Building T0234, located near the intersection of Rives Road and

9th Street on MTC, Attn: Mr. Scott Newcomb, Fort Barfoot, Blackstone, VA 23824-9000. The deadline for submitting bids is 1:00 PM. sharp, as determined by the Bid Officer, on July 16, 2024. Bid must reach the bid officer by the date and time specified or the bids or will be marked “LATE” and shall not be considered.

The bids will be opened publicly and read aloud beginning at 1:00 PM, on the following day, July 17, 2024, within the conference room of Building T0232 (DPW Compound).

➢ All potential bidders shall clearly label all bids on the exterior of the envelope with all pertinent information including project name, project number, DMA project manager's name, bid due date and time, and shall be clearly marked "Bid Enclosed." Any bids that are received late due to improper labeling by the contractor shall be marked as late and shall not be considered.

A Bid Bond is not required. The contractor, shall however, provide certificate of builder’s risk insurance equal to the value of the contract plus any change orders.

eVA Vendor Registration: The bidder or offeror shall be a registered vendor in eVA. See the attached eVA Vendor Registration Requirements.

Procedures for submitting a bid, claiming an error, withdrawal of bids and other pertinent information are contained in the Instructions to Bidders, which is part of the Invitation for Bids. Withdrawal due to error in bid shall be permitted in accord with Section 9 of the Instructions to Bidders and § 2.2-4330, Code of Virginia.

The Owner reserves the right to reject any or all bids.

A pre-bid conference will be held at Building 2620, Fort Barfoot, at 11:00 AM, on June 25, 2024.

RECORD OF ATTENDEES: All attendees present must sign the Pre-Bid Conference “Record of

Attendees” sign in sheet before the end of the conference. Note: This is a mandatory pre-bid conference.

Bid proposals will only be accepted from those bidders who attend this conference. Each attendee may represent only one bidder. Each attendee shall legibly sign in and provide accurate contract information including a working email address for distribution of future communications regarding the project.

All parties must present valid government approved identification when arriving on Fort Barfoot and should allow extra time accordingly. Attendance shall be mandatory for those submitting a bid. This will be the edward.newcomb Highlight

Notice of Invitation for Bids Page 2 of 2

DGS-30-256

(Rev. 03/20 only scheduled time for prospective contractors to review the work areas prior to the bid submission date. Subcontractors, suppliers, and other interested parties are encouraged to attend the pre-bid conference.

Questions will be due NLT 4:00PM on June 28, 2024 by email to edward.s.newcomb.nfg@army.mil

Addendum Number 1 (one) will be issued by 4:00pm on July 2, 2024

The contract shall be awarded on a lump sum basis as follows: the Total Base Bid Amount including any properly submitted and received bid modifications. ‘Notice of Award’ or ‘Notice of Intent to

Award’ will be posted on eVA, Virginia Department of General Services’ central electronic procurement website, at https://eva.virginia.gov..

Contractor registration is required in accordance with Section 54.1-1103 of the Code of Virginia. See the

Invitation for Bids for additional qualification requirements.

All executive branch agencies are directed to advance Executive Order 35, dated July 3, 2019.

➢ Building Permits: No building permit required. Project is not required to be submitted to DEB.

All other permits are the responsibility of the Contractor.

➢ Time for Completion is 120 calendar days to Substantial completion. Final Completion shall be within 30 days after the date of Substantial completion.

➢ The project does not include prevailing wage rate requirements.

➢ Access to work is limited to the work schedule of the facility. Hours of operation are Monday through Friday 7:00 am to 4:30 pm (alternate work hours can be incorporated with a minimum of one week notification).

The Invitation for Bids for the above project may be obtained from the Department of Public Works Office beginning on June 17, 2024, at 2:00 PM (8.5 x 11.5 hard copy only).

Addenda to the project, if any, will be emailed. Therefor it is critical that the email address on the prebid sign in sheet be legible and accurate. It will be the only form of communication used for notification. All

Addenda, if any, shall be acknowledged in the designated location on the Bid Form.

Copies of the Invitation for Bids documents, including the statement of work, will also be available for inspection at the following locations:

Owner's office Building T0234, Fort Barfoot

Authorized Official of Owner/Agency

James W. Ring

Major General, VaARNG

The Adjutant General of Virginia https://eva.virginia.gov/ edward.newcomb Highlight

COMMONWEALTH OF VIRGINIA – DEPARTMENT OF MILITARY AFFAIRS

FORT BARFOOT 2600 AREA BARRACKS FLOORING REPLACEMENTS

Fort Barfoot– Blackstone, TABLE OF CONTENTS 001100 - 1

TABLE OF CONTENTS

BIDDING DOCUMENTS

DGS-30-055

DGS-30-090

Notice of Invitation for Bids

Instructions to Bidders, CO-7a

Prebid Question Form

Bid Form

Vendor eVA Registration Requirements

DGS-30-384

GENERAL & SPECIAL CONDITIONS

General Conditions of the Construction Contract, CO-7 DGS-30-054

Virginia Army National Guard eMS Notice to Contractors

FORMS

*Contract Between Owner and Contractor, CO-9 DGS-30-064

*Worker's Compensation Certificate of Coverage, CO-9a DGS-30-076

*Standard Performance Bond, CO–10 DGS-30-084

*Standard Labor and Material Payment Bond, CO–10.1 DGS-30-088

*Change Order Blank, CO-11 DGS-30-092

*General Contractor's Estimate for Change Order Estimate, GC-1 DGS-30-200

*Subcontractor Estimate for Change Order, SC-1 DGS-30-204

*Sub-subcontractor Estimate for Change Order, SS-1 DGS-30-208

*Schedule of Values and Certificate for Payment, CO–12 DGS-30-104

*Affidavit of Payment of Claims, CO–13 DGS-30-108

*Certificate of Completion by Architect/Engineer or Project Manager, CO–13.1 DGS-30-112

*Architect/Engineer’s Certificate of Substantial Completion, CO-13.1a DGS-30-116

*Final Report of Structural Special Inspections, CO–13.1b DGS-30-120

*Certificate of Completion by Contractor, CO–13.2 DGS-30-136

*Certificate of Partial or Substantial Completion by Contractor, CO–13.2a DGS-30-140

*The above-referenced forms are available at:

https://dgs.virginia.gov/search/documents-and-forms/?filter=DEB

Fort Barfoot – Directorate of Public Works

Contract Scope of Services

Page | 1

CONTRACT REFERENCE: 24-84333

PROJECT NAME: 2600 Area Barracks T2620,T2621,T2622,T2623,T2626 Floor Replacements PROJECT LOCATION: Fort Barfoot, W. 28th St., Blackstone, VA 23824 PROJECT MANAGER: Paul Caley; Phone: 434-480-7941

GENERAL: Pursuant to deficiencies and repairs required from Operation Allied Welcome, it has been deemed necessary to replace VCT flooring in the barracks cited.

SUMMARY OF WORK:

These five (5) barracks are two story buildings at approximately 5,310 square feet each. They have VCT flooring in the sleeping areas, corridors, mop receptor closets, and leader rooms. This flooring is to be removed and disposed of. New LVT (luxury vinyl tile) plank flooring is to be installed in its place.

CONTRACTOR RESPONSIBILITIES:

• Remove and store all bunks, mattresses, foot lockers, and vertical lockers.

• Provide the means and method to dispose of existing VCT flooring, via garbage dumpsters.

• Shoe molding shall be removed and retained where possible.

• Existing thresholds shall be removed and retained.

• Existing underlayment for VCT tile shall be removed and disposed of.

• New black felt paper shall be installed.

• New underlayment material of an acceptable thickness and type shall be installed over the felt paper and properly secured. A thinner underlayment may be required at the second floor rear doors to allow door swing clearance. A threshold strip will required between this area and the rest of the barracks flooring.

• Apply an acceptable adhesive product.

• The LVT flooring product, Armstrong Parallel USA 20, shall be installed in corridors, leader rooms, mop receptor room, and barracks sleeping areas. The color and thickness shall be J5115, Glendale Oak Scotch Mist, 2.5 mm thick.

• Shoe molding shall be installed. If new molding is installed, it shall be painted to match adjacent trim in Sherwin Williams color Network Gray.

• Shoe molding shall be installed around interior support columns and painted.

• Thresholds shall be installed back in place.

• Caulk shall be applied where required at molding and thresholds.

• Replace all furniture back in place in accordance with a layout to be conveyed by DPW.

In addition to work results, the contractor shall:

1. Ensure that all areas of work are free of debris and kept clean.

2. Adhere to all OSHA safety standards.

3. Require that all contractor personnel provide photo identification when attempting to enter the post premises.

4. Ensure that contractor vehicles have current registration and inspection.

OWNER RESPONSIBILITIES:

1. DMA/DPW will provide access to areas of work for the duration of work. All buildings will not be occupied during work.

2. Make the best effort to maintain space temperatures within the limits recommended by the flooring manufacturer.

3. Review the furniture layout with the contractor prior to replacement.

Page | 2

PROJECT DURATION: This work is expected to take place over a 10 week period to include furniture removal, flooring work, and furniture replacement.

REFERENCES:

1. Armstrong Flooring Installation Guidelines

2. Pictures depicting existing conditions

3. Asbestos reports for all five (5) barracks buildings in this scope

4. The CO-7, General Conditions of the Construction Contract, has been created specifically for the use of agencies of the Commonwealth of Virginia and will be adhered to in its entirety for this project. Complete forms can be found at:

Page | 3

Barracks Sleeping Area – Typ. of All

Second Floor Corridor and Leader Rooms – Typ. of T2620 and T2626

Page | 4

First Floor Corridor – Typ. of All

Mop Receptor Closet – Typ. of T2620 and T2626

T2626

Marshall Miller & Associates, Inc.

Client: Building Number: 2626

Project Number:

PHOTO 1

Description:

Asbestos Field Sheet Data

Asbestos Lab Data

Lead Lab Data

SanAir Technologies Laboratory, Inc.

1551 Oakbridge Drive, Suite B, Powhatan, VA 23139

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

1/4/2012

1/23/2012 8:00:00 AM

1/30/2012 12:32:19 PM

Pisula, Nicholas

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2613R 2 / 12001417-057 Black 60% Cellulose 40% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2613R 3 / 12001417-058 Black 100% Other None Detected Silicon Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2614R 1 / 12001417-059 Green 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2614R 2 / 12001417-060 Black 60% Cellulose 40% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2614R 3 / 12001417-061 Black 96% Other 4% Chrysotile Hard Silicon Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626R 1 / 12001417-062 Green 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626R 2 / 12001417-063 Black 60% Cellulose 40% Other None Detected Tar Paper Fibrous

Homogeneous

12001417 SanAir ID Number

FINAL REPORT

Certification

Signature: Reviewed:

Date: 1/30/2012 Date: 1/30/2012 Page 9 of 10

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates Rt. 720 Industrial Park Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

1/10/2012

1/23/2012 8:00:00 AM

1/30/2012 9:08:41 AM

Sobrino, Sandra

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers AT 224-01 / 12001418-038 Black 100% Other None Detected Roof Shingle Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers AT 224-02 / 12001418-039 White 100% Other None Detected Caulk Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers AT 224-03 / 12001418-040 Black 60% Cellulose 40% Other None Detected Tar Paper Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2628-01 / 12001418-041 Beige 100% Other None Detected Floor Tile, Floor Tile Non-Fibrous

Homogeneous 2628-01 / 12001418-041 Black 100% Other None Detected Floor Tile, Mastic Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2628-02 / 12001418-042 Grey 5% Cellulose 95% Other None Detected Sheet Rock Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626-01 / 12001418-043 Maroon 100% Other None Detected Floor Tile, Floor Tile Non-Fibrous

Homogeneous 2626-01 / 12001418-043 Tan 50% Cellulose 50% Other None Detected Floor Tile, Mastic/Felt Non-Fibrous

Heterogeneous

12001418 SanAir ID Number

FINAL REPORT

Certification

Date: 1/28/2012 Date: 1/30/2012 Page 7 of 9

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates Rt. 720 Industrial Park Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

1/10/2012

1/23/2012 8:00:00 AM

1/30/2012 9:08:41 AM

Sobrino, Sandra

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626-02 / 12001418-044 Grey 5% Cellulose 95% Other None Detected Sheet Rock Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626-03 / 12001418-045 Grey 5% Cellulose 95% Other None Detected Sheet Rock Trim Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2625-01 / 12001418-046 Maroon 100% Other None Detected Floor Tile, Floor Tile Non-Fibrous

Homogeneous 2625-01 / 12001418-046 Various 97% Other 3% Chrysotile Floor Tile, Mastic Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2625-02 / 12001418-047 Grey 5% Cellulose 95% Other None Detected Sheet Rock Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2625-03 / 12001418-048 Grey 5% Cellulose 95% Other None Detected Sheet Rock Trim Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2625-04 / 12001418-049 White 35% Other 5% Chrysotile Pipe Wrap Fibrous 60% Amosite

Homogeneous

12001418 SanAir ID Number

FINAL REPORT

Certification

Date: 1/28/2012 Date: 1/30/2012 Page 8 of 9

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

3/12/2012

3/19/2012 8:00:00 AM

3/23/2012 5:22:37 PM

Tallert, Jonathan G.

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-R 1 / 12005448-029 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-R 2 / 12005448-030 Black 70% Cellulose 30% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626-R 1 / 12005448-031 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626-R 2 / 12005448-032 Black 70% Cellulose 30% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2625-R 1 / 12005448-033 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2625-R 2 / 12005448-034 Black 70% Cellulose 30% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2624-R 1 / 12005448-035 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

12005448 SanAir ID Number

FINAL REPORT

Certification

Date: 3/23/2012 Date: 3/23/2012 Page 5 of 10

T2623

Client: Building Number: 2623

Project Number:

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

1/31/2012

2/13/2012 8:00:00 AM

2/20/2012 10:28:21 AM

Pisula, Nicholas

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 209-4-5 / 12002932-021 Green 100% Other < 1% Chrysotile Window Glazing Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 209-5-6 / 12002932-022 Grey 25% Cellulose 5% Other 70% Chrysotile Heat Shield Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 209-5-7 / 12002932-023 Grey 25% Cellulose 5% Other 70% Chrysotile Heat Shield Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-1-1 / 12002932-024 Grey 5% Cellulose 95% Other None Detected Sheetrock Wall Board System Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-1-2 / 12002932-025 Grey 5% Cellulose 95% Other None Detected Sheetrock Wall Board System Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-6-3 / 12002932-026 White 100% Other None Detected Floor Tile Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2638-6-1 / 12002932-027 White 100% Other None Detected Floor Tile, Floor Tile Non-Fibrous

Homogeneous 2638-6-1 / 12002932-027 Black 97% Other 3% Chrysotile Floor Tile, Mastic Non-Fibrous

Homogeneous

12002932 SanAir ID Number

FINAL REPORT

Certification

Date: 2/20/2012 Date: 2/20/2012 Page 4 of 14

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

3/12/2012

3/19/2012 8:00:00 AM

3/23/2012 5:22:37 PM

Tallert, Jonathan G.

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-R 1 / 12005448-029 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-R 2 / 12005448-030 Black 70% Cellulose 30% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626-R 1 / 12005448-031 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626-R 2 / 12005448-032 Black 70% Cellulose 30% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2625-R 1 / 12005448-033 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2625-R 2 / 12005448-034 Black 70% Cellulose 30% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2624-R 1 / 12005448-035 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

12005448 SanAir ID Number

FINAL REPORT

Certification

T2622

Client: Building Number: 2622

Project Number:

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

1/4/2012

1/23/2012 8:00:00 AM

1/30/2012 9:33:54 AM

Vaughan, Nathaniel

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2601R 1 / 12001420-001 Green 100% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2601R 2 / 12001420-002 Black 85% Cellulose 15% Other None Detected Tar Paper Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2601R 3 / 12001420-003 Black 100% Other None Detected Hard Silicon Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2622R 1 / 12001420-004 Green 100% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2622R 2 / 12001420-005 Black 85% Cellulose 15% Other None Detected Tar Paper Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2622R 3 / 12001420-006 Black 100% Other None Detected Roofing Cement Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2631R 1 / 12001420-007 Green 100% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

12001420 SanAir ID Number

FINAL REPORT

Certification

Date: 1/27/2012 Date: 1/30/2012 Page 1 of 12

T2621

Client: Building Number: 2621

Project Number:

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA 751

Ft Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

11/17/2011

11/21/2011 8:56:00 AM

11/29/2011 2:23:12 PM

Vaughan, Nathaniel

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 467-1 / 11019962-001 White 40% Cellulose 60% Other None Detected Wallboard Sys Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 467-2 / 11019962-002 White 100% Other None Detected Floor Tile, Floor Tile Non-Fibrous

Heterogeneous 467-2 / 11019962-002 Black 96% Other 4% Chrysotile Floor Tile, Mastic Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 467-3 / 11019962-003 Black 95% Other 5% Chrysotile Floor Mastic, Mastic Non-Fibrous

Heterogeneous 467-3 / 11019962-003 Grey 100% Other None Detected Floor Mastic, Grout Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 467-4 / 11019962-004 White 8% Cellulose 92% Other None Detected Wallboard Sys, Wallboard Non-Fibrous

Heterogeneous 467-4 / 11019962-004 White 100% Other None Detected Wallboard Sys, Joint Compound Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2621-1 / 11019962-005 White 100% Other None Detected Floor Tile, Floor Tile Non-Fibrous

Heterogeneous 2621-1 / 11019962-005 Black 100% Other None Detected Floor Tile, Mastic Non-Fibrous

Heterogeneous

11019962 SanAir ID Number

FINAL REPORT

Certification

Date: 11/29/2011 Date: 11/29/2011 Page 1 of 2

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

1/4/2012

1/23/2012 8:00:00 AM

1/30/2012 12:32:19 PM

Pisula, Nicholas

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2617R 1 / 12001417-008 Green 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2617R 2 / 12001417-009 Black 10% Glass 90% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2617R 3 / 12001417-010 Black 98% Other 2% Chrysotile Roofing Tar Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2620R 1 / 12001417-011 Green 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2620R 2 / 12001417-012 Black 60% Cellulose 40% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2620R 3 / 12001417-013 Black 5% Cellulose 95% Other None Detected Roofing Tar Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2621R 1 / 12001417-014 Green 10% Glass 90% Other None Detected Top Layer Of Roof Non-Fibrous

Heterogeneous

12001417 SanAir ID Number

FINAL REPORT

Certification

Date: 1/30/2012 Date: 1/30/2012 Page 2 of 10

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

1/4/2012

1/23/2012 8:00:00 AM

1/30/2012 12:32:19 PM

Pisula, Nicholas

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2621R 2 / 12001417-015 Black 100% Other None Detected Silicon Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2449R 1 / 12001417-016 Green 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2449R 2 / 12001417-017 Black 60% Cellulose 40% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2449R 3 / 12001417-018 Black 98% Other 2% Chrysotile Hard Silicon Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2450R 1 / 12001417-019 Green 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2450R 2 / 12001417-020 Black 30% Cellulose 40% Other None Detected Tar Paper Non-Fibrous 30% Glass

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2450R 3 / 12001417-021 Black 98% Other 2% Chrysotile Hard Silicon Non-Fibrous

Homogeneous

12001417 SanAir ID Number

FINAL REPORT

Certification

Date: 1/30/2012 Date: 1/30/2012 Page 3 of 10

T2620

Client: Building Number: 2620

Project Number:

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

1/4/2012

1/23/2012 8:00:00 AM

1/30/2012 12:32:19 PM

Pisula, Nicholas

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2617R 1 / 12001417-008 Green 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2617R 2 / 12001417-009 Black 10% Glass 90% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2617R 3 / 12001417-010 Black 98% Other 2% Chrysotile Roofing Tar Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2620R 1 / 12001417-011 Green 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Heterogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2620R 2 / 12001417-012 Black 60% Cellulose 40% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2620R 3 / 12001417-013 Black 5% Cellulose 95% Other None Detected Roofing Tar Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2621R 1 / 12001417-014 Green 10% Glass 90% Other None Detected Top Layer Of Roof Non-Fibrous

Heterogeneous

12001417 SanAir ID Number

FINAL REPORT

Certification

Date: 1/30/2012 Date: 1/30/2012 Page 2 of 10

T2623

Client: Building Number: 2623

Project Number:

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

1/31/2012

2/13/2012 8:00:00 AM

2/20/2012 10:28:21 AM

Pisula, Nicholas

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 209-4-5 / 12002932-021 Green 100% Other < 1% Chrysotile Window Glazing Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 209-5-6 / 12002932-022 Grey 25% Cellulose 5% Other 70% Chrysotile Heat Shield Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 209-5-7 / 12002932-023 Grey 25% Cellulose 5% Other 70% Chrysotile Heat Shield Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-1-1 / 12002932-024 Grey 5% Cellulose 95% Other None Detected Sheetrock Wall Board System Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-1-2 / 12002932-025 Grey 5% Cellulose 95% Other None Detected Sheetrock Wall Board System Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-6-3 / 12002932-026 White 100% Other None Detected Floor Tile Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2638-6-1 / 12002932-027 White 100% Other None Detected Floor Tile, Floor Tile Non-Fibrous

Homogeneous 2638-6-1 / 12002932-027 Black 97% Other 3% Chrysotile Floor Tile, Mastic Non-Fibrous

Homogeneous

12002932 SanAir ID Number

FINAL REPORT

Certification

Date: 2/20/2012 Date: 2/20/2012 Page 4 of 14

804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070

Web: http://www.sanair.com E-mail: iaq@sanair.com

Name:

Address:

Marshall Miller & Associates ATTN: Accounts Payable 534 Industrial Park Rd Bluefield, VA 24605

Project Number:

P.O. Number:

Project Name:

DMA751

Ft. Pickett

Collected Date:

Received Date:

Report Date:

Analyst:

3/12/2012

3/19/2012 8:00:00 AM

3/23/2012 5:22:37 PM

Tallert, Jonathan G.

Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos

SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-R 1 / 12005448-029 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2623-R 2 / 12005448-030 Black 70% Cellulose 30% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626-R 1 / 12005448-031 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2626-R 2 / 12005448-032 Black 70% Cellulose 30% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2625-R 1 / 12005448-033 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2625-R 2 / 12005448-034 Black 70% Cellulose 30% Other None Detected Tar Paper Fibrous

Homogeneous

Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2624-R 1 / 12005448-035 Black 10% Glass 90% Other None Detected Top Roof Layer Non-Fibrous

Homogeneous

12005448 SanAir ID Number

FINAL REPORT

Certification

Standard Bid Form Format Page 1 of 4

DGS-30-220 Standard Bid Form Format (Rev. 07/22)

BID FORM

DATE: ________________

PROJECT: Fort Barfoot 2600 Area Barracks Flooring Replacements, Fort Barfoot, Blackstone, Virginia

Project Code: 24-84333

To: Commonwealth of Virginia

Department of Military Affairs

Directorate of Public Works, Building T0234

MTC, Fort Pickett, Blackstone, VA, 23824-9000

In compliance with and subject to your Invitation for Bids and the documents therein specified, all of which are incorporated herein by reference, the undersigned bidder proposes to furnish all labor, equipment, and materials and perform all work necessary for construction of this project, in accordance with the Invitation for Bid issued March 18, 2024, and the Addenda noted below, as prepared by Fort Barfoot Department of Public Works for the consideration of the following amount:

BASE BID :

PART A.

Lump sum price for flooring replacement in barracks T2620 in accordance with the Invitation for Bid:

PART A = ________________________________________ Dollars ($______________________)

PART B.

Lump sum price for flooring replacement in barracks T2621 in accordance with the Invitation for Bid:

PART B = ________________________________________ Dollars ($______________________)

PART C = ________________________________________ Dollars ($______________________)

PART C.

Lump sum price for flooring replacement in barracks T2622 in accordance with the Invitation for Bid:

PART D.

Lump sum price for flooring replacement in barracks T2623 in accordance with the Invitation for Bid:

PART D = ________________________________________ Dollars ($______________________)

Standard Bid Form Format Page 2 of 4

TOTAL BASE BID AMOUNT (Sum of PART A through E) IS:

_________________________________________________________DOLLARS ($_____________)

Contract award will be based on the TOTAL BASE BID AMOUNT shown above (including any properly submitted bid modifications) plus as many Additive Bid Items taken in sequence as the Owner in its discretion decides to award.

Code of Virginia, § 2.2-4376.2 shall be applicable to the Work of the Contract.

The undersigned understands that time is of the essence and agrees that the time for Substantial Completion of the entire project shall be 60 consecutive calendar days from the date of commencement of the Work as specified in the Notice to Proceed, and Final Completion shall be achieved within 30 consecutive calendar days after the date of Substantial Completion as determined by DPW.

Acknowledgment is made of receipt of the following Addenda:

If notice of acceptance of this bid is given to the undersigned within 30 days after the date of opening of bids, or any time thereafter before this bid is withdrawn, the undersigned will execute and deliver a contract in the prescribed form (Commonwealth of Virginia Contract Between Owner and Contractor, Form CO-9) within 10 days after the contract has been presented to him for signature. The required payment and performance bonds, on the forms prescribed, shall be delivered to the Owner along with the signed Contract.

Immigration Reform and Control Act of 1986: The undersigned certifies that it does not and shall not during the performance of the Contract for this project violate the provisions of the Federal

Immigration Reform and Control Act of 1986, which prohibits employment of illegal aliens, or knowingly employ an unauthorized alien as defined in the Federal Immigration Reform and Control

Act of 1986.

DISQUALIFICATION OF CONTRACTORS: By signing this bid or proposal, the undersigned certifies that this Bidder or any officer, director, partner or owner is not currently barred from bidding on contracts by any Agency of the Commonwealth of Virginia, or any public body or agency of another state, or any agency of the federal government, nor is this Bidder a subsidiary or affiliate of any firm/corporation that is currently barred from bidding on contracts by any of the same. We have attached an explanation of any previous disbarment(s) and copies of notice(s) of reinstatement(s).

Either the undersigned or one of the following individuals, if any, is authorized to modify this bid prior to the deadline for receipt of bids by writing the modification and signing his name on the face of the

PART E = ________________________________________ Dollars ($______________________)

PART E.

Lump sum price for flooring replacement in barracks T2626 in accordance with the Invitation for Bid:

Standard Bid Form Format Page 3 of 4 bid, on the envelope in which it is enclosed, on a separate document, or on a document which is telefaxed to the Owner:

I certify that the firm name given below is the true and complete name of the bidder and that the bidder is legally qualified and licensed by the Virginia Department of Professional and Occupational Regulation, Board for Contractors, to perform all Work included in the scope of the Contract.

Virginia License No.: ______________ Bidder: ______________________________ (Name of Firm)

Contractor Class: ________________ By:___________________________________ (Signature)

Specialty: _______________________ Valid until: ______________________

FEIN/SSN: _____________________ Title: _______________________________

If General Partnership (List Partners' Names)

Business Address:

Telephone # ________________________

FAX # _______________________________

If Corporation, affix Corporate Seal & list State of Incorporation

State: _____________________________

(Affix Seal)

Standard Bid Form Format Page 4 of 4

Virginia State Corporation Commission ID No.: _______________; or

If Contractor is a foreign business entity not required to be authorized to transact business in the

Commonwealth under Titles 13.1 or 50 of the Code of Virginia, or as otherwise required by law, please provide an explanation as to why such entity is not required to be so authorized: ____________________

[Agency Small Business Participation Requirement:] % 42% (optional)

Contractor’s Proposed Small Business Participation: % (required)

DGS-30-272

(Rev. 04/15)

PREBID QUESTION FORM

(Use separate Form for each question submitted.)

Date:

Project Title: Fort Barfoot 2600 Area Barracks Flooring Replacements

Project Code No.: 24-84333

The following question concerns the following on the Invitation for Bid:

The following question regarding pictures in the Invitation for Bid:

All responses to questions will be made by Addendum.

Question submitted by:

Name Organization

Bidders shall submit form to:

Name Organization

Email address:

or FAX No.: ( )

Scope of Work - Barracks T2620,T2621,T2622,T2623,T2626 Floor Replacements.pdf
Binder1.pdf
IFB 2600 Area Flooring.pdf
T2626 FINAL 09-30-2013.pdf
T2623 FINAL 09-30-2013.pdf
T2622 FINAL 09-30-2013.pdf
T2621 FINAL 09-30-2013.pdf
T2620 FINAL 09-30-2013.pdf
T2623 FINAL 09-30-2013.pdf
TOC-Bid Form.pdf
Binder2.pdf
0002 TOC FPTM pg 1
Binder1.pdf
dgs-30-220_07-22_bid_form RTC
Prebid Question Form
Client 0:
Building Number 2626:
fill_3:
HVFULSWLRQ:
PRXQW:
ORRU7LOH:
1:
fill_5:
1_2:
6KHHWURFN:
RLOHU5RRP:
1_3:
fill_10:
1_4:
6KHHWURFN7ULP:
RLOHU5RRP_2:
1_5:
fill_15:
1_6:
GJH2I5RRI:
1_7:
fill_19:
1_8:
7DU3DSHU:
GJH2I5RRI_2:
1_9:
fill_24:
1_10:
GJH2I5RRI_3:
1_11:
fill_28:
1_12:
7DU3DSHU_2:
GJH2I5RRI_4:
1_13:
fill_33:
1_14:
QRQH:
2WKHU:
QRQH_2:
QRQH_3:
QRQH_4:
7DQ:
QRQH_5:
2WKHU_2:
QRQH_6:
QRQH_7:
QRQH_8:
0DVWLFHOW:
UH:
QRQH_9:
2WKHU_3:
QRQH_10:
QRQH_11:
QRQH_12:
0DVWLFHOW_2:
UH_2:
QRQH_13:
2WKHU_4:
QRQH_14:
QRQH_15:
QRQH_16:
0DVWLFHOW_3:
ODVV:
QRQH_17:
2WKHU_5:
QRQH_18:
QRQH_19:
QRQH_20:
0DVWLFHOW_4:
QRQH_21:
2WKHU_6:
QRQH_22:
QRQH_23:
QRQH_24:
0DVWLFHOW_5:
ODVV_2:
QRQH_25:
2WKHU_7:
QRQH_26:
QRQH_27:
QRQH_28:
0DVWLFHOW_6:
QRQH_29:
2WKHU_8:
QRQH_30:
QRQH_31:
QRQH_32:
KLWH:
WORFN:
RXQGDWLRQ:
KLWH_2:
fill_5_2:
UHHQ:
fill_7:
WOXPLQXPUDPH:
fill_9:
fill_10_2:
fill_11:
QWRRG3ODQHV:
KLWH_3:
QWRRG3DQHOV:
fill_15_2:
QW0HWDOXFWV:
fill_17:
QWRRGROXPQ:
fill_19_2:
KLWH_4:
QWRRG3DQHOV_2:
fill_22:
QW0HWDO3LSHV:
DWKURRP:
fill_34:
vocftk:
Yi irr:
rL i f Ii TI i:
i f:
I 9f:
fill_5_3:
4J rlaf Row1:
fORow1:
9fRow1:
fill_9_2:
4J rlaf Row2:
fORow2:
9fRow2:
Row1:
fill_14:
4J rlaf Row3:
9fRow3:
Row2:
IRow1:
fill_18:
4J rlaf Row4:
9fRow4:
Row3:
IRow2:
fill_22_2:
4J rlaf Row5:
9fRow5:
Row4:
fill_26:
4J rlaf Row6:
9fRow6:
Row5:
fill_30:
4J rlaf Row7:
9fRow7:
Row6:
PLM EPA 600R93116:
ABA:
PCM NIOSH 7400:
ABSE:
PLM EPA 600R93116 Qual:
ABBRow1:
Positive Stop D:
ABA2:
OSHAwTWA:
ABSP:
PLM GARB 435 LOO 1:
ABEPA:
PLM EPA 400 Point Count:
ABTEM:
TEMAHERA:
ABSP1:
PLM CARB 435 LOO 025:
PLM EPA 1000 Point Count:
ABATN:
TEM NIOSH 7 402:
ABSP2:
PLM CARB 435 LOO 01:
ABB1KRow1:
PLM EPA NOB:
ABT2:
TEM Level II:
undefined:
ABBCH:
TEM Chatfield:
ABBTM:
TEM EPA NOB:
Water Dust:
ABBNY:
ASHE:
EPA 1002:
ABWA:
TEM Wipe ASTM D6480:
TEM NY ELAP 1984OTHER Matrix:
D:
ABDMV:
TEM Microvac ASTM D5755:
Sample:
Volume or Areap KeF IAVa:
Sample Typep KeF IAVa:
Flow Ratep KeF IAVa:
Time StartStopp KeF IAVa:
Time StartStopp KeF IAVa_2:
Volume or Area:
Sample Type:
Flow Rate:
Time StartStop:
Time StartStop_2:
Volume or Area1L y sa:
Sample Type1L y sa:
Flow Rate1L y sa:
Time StartStop1L y sa:
Time StartStop1L y sa_2:
Volume or Area s a1:
Sample Type s a1:
Flow Rate s a1:
Time StartStop s a1:
Time StartStop s a1_2:
Volume or AreaL lJDZ:
Sample TypeL lJDZ:
Flow RateL lJDZ:
Time StartStopL lJDZ:
Time StartStopL lJDZ_2:
Volume or Area1o:
Sample Type1o:
Flow Rate1o:
Time StartStop1o:
Time StartStop1o_2:
Volume or Arear Koo t:
Sample Typer Koo t:
Flow Rater Koo t:
Time StartStopr Koo t:
Time StartStopr Koo t_2:
Volume or Area iJLAL:
Sample Type iJLAL:
Time StartStopRow8:
Time StartStopRow8_2:
Volume or AreaI f JL J f LJti:
Sample TypeI f JL J f LJti:
Time StartStopI f JL J f LJti:
Time StartStopI f JL J f LJti_2:
Volume or AreatM oo var:
Sample TypetM oo var:
Time StartStoptM oo var:
Time StartStoptM oo var_2:
Volume or Arear r111 ODJPt:
Sample Typer r111 ODJPt:
Time StartStopr r111 ODJPt:
Time StartStopr r111 ODJPt_2:
Row1:
r r111 ODJPtRow1:
Volume or AreaRow12:
Sample TypeRow12:
Time StartStopRow12:
Time StartStopRow12_2:
Relinauish1wi bv JRow1:
TimeI:
Received by eI:
Date l h111I:
Time K JvI:
Pageof:
lOOl:
Phone Phone Fax Email:
PLM EPA 600R93116_2:
ABA_2:
PCM NIOSH 7400_2:
ABSE_2:
PLM EPA 600R93116 Qual_2:
ABBRow1_2:
JiPositive Stop D:
ABA2_2:
OSHAwTWA_2:
ABSP_2:
PLM CARB 435 LOD 1:
ABEPA_2:
PLM EPA 400 Point Count_2:
ABTEM_2:
TEMAHERA_2:
ABSP1_2:
PLM CARB 435 LOO 025_2:
PLM EPA 1000 Point Count_2:
ABATN_2:
TEM NIOSH 7402:
ABSP2_2:
PLM CARB 435 LOO 01_2:
ABB1KRow1_2:
PLM EPA NOB_2:
ABT2_2:
TEM Level II_2:
D_2:
ABBCH_2:
TEM Chatfield_2:
ABBTM_2:
TEM EPA NOB_2:
Water Dust_2:
ABBNY_2:
TEM NY ELAP 1984:
ASHE_2:
EPA 1002_2:
ABWA_2:
TEM Wipe ASTM D6480_2:
Volume or AreaRrh:
Sample TypeRrh:
Flow RateRrh:
Time Start StopRrh:
Time Start StopRrh_2:
Volume or AreaJ rf Jr k:
Sample TypeJ rf Jr k:
Flow RateJ rf Jr k:
Time Start StopJ rf Jr k:
Time Start StopJ rf Jr k_2:
Volume or Arearcer J:
Sample Typercer J:
Flow Ratercer J:
Time Start Stoprcer J:
Time Start Stoprcer J_2:
Volume or AreaSJ facK:
Sample TypeSJ facK:
Flow RateSJ facK:
Time Start StopSJ facK:
Time Start StopSJ facK_2:
Volume or Areainf k:
Sample Typeinf k:
Flow Rateinf k:
Time Start Stopinf k:
Time Start Stopinf k_2:
Volume or Arearr hi:
Sample Typerr hi:
Flow Raterr hi:
Time Start Stoprr hi:
Time Start Stoprr hi_2:
Volume or Areaskeftnrf:
Sample Typeskeftnrf:
Flow Rateskeftnrf:
Time Start Stopskeftnrf:
Time Start Stopskeftnrf_2:
Volume or Areacj11fmJ krM:
Sample Typecj11fmJ krM:
Flow Ratecj11fmJ krM:
Time Start Stopcj11fmJ krM:
Time Start Stopcj11fmJ krM_2:
Volume or AreaP1b WrA:
Sample TypeP1b WrA:
Flow RateP1b WrA:
Time Start StopP1b WrA:
Time Start StopP1b WrA_2:
Volume or AreaJ frdci:
Sample TypeJ frdci:
Flow RateJ frdci:
Time Start StopJ frdci:
Time Start StopJ frdci_2:
Volume or AreaK:
Sample TypeK:
Flow RateK:
Time Start StopK:
Time Start StopK_2:
Volume or AreaI:
Sample TypeI:
Flow RateI:
Time Start StopI:
Time Start StopI_2:
I Special Instructions I:
undefined_2:
Time:
TimeRow1:
TimeRow2:
SanAir Technologies laboratorv Inc 1551 Oakbridge Drive Suite 13 Powhatan VA 23139 8048971177 8888951177 Fax 8048970070 wwwsanaircom:
ll0DS118:
Proiect Name:
eject 7M4 5I:
Phone:
Citv St Zia:
undefined_3:
Date Collectec:
Fax:
Samples Collected Bv t:
fill_91:
Email:
3 ysis Types:
Bulk Air:
R:
ABA_3:
PCM:
ABSE_3:
PLMEPA600R93116 Qual:
ABBRow1_3:
Positive Stop:
ABA2_3:
OSH 7400OSH:
vTWA:
ABSP_3:
PLM CARB 435 LOO 1:
ABEPA_3:
PLM EPA 400 Point Count_3:
ABTEM_3:
TEM:
liERA:
ABSP1_3:
PLM CARS 435 LOD 025:
PLM EPA 1000 Point Count_3:
ABATN_3:
TEM_2:
NOSH 7402:
ABSP2_3:
PLM CARB 435 LOO 01_3:
ABB1KRow1_3:
PLM EPA NOB_3:
ABT2_3:
TEM_3:
E vel II:
undefined_4:
ABBCH_3:
TEM Chatfield_3:
ABBTM_3:
TEM EPA NOB_3:
ABBNY_3:
ASHE_3:
EPA:
ABWA_3:
TEM Wipe ASTM D6480_3:
TEM NY ELAP 1984OTHER Matrix_2:
C 02Row1:
ABDMV_2:
TEM Microvac ASTM D5755_2:
lfRTEM:
Sample_2:
1t on:
Volume or AreaTro ro lo:
Sample TypeTro ro lo:
Flow RateTro ro lo:
Time Start StopTro ro lo:
Time Start StopTro ro lo_2:
n:
Volume or Area n:
Sample Type n:
Flow Rate n:
Time Start Stop n:
Time Start Stop n_2:
3:
rl9nS1 Zvn f:
Volume or Area rl9nS1 Zvn f:
Sample Type rl9nS1 Zvn f:
Flow Rate rl9nS1 Zvn f:
Time Start Stop rl9nS1 Zvn f:
Time Start Stop rl9nS1 Zvn f_2:
I 1 o oo:
Volume or AreaI 1 o oo:
Sample TypeI 1 o oo:
Flow RateI 1 o oo:
Time Start StopI 1 o oo:
Time Start StopI 1 o oo_2:
Volume or AreaRow5:
Sample TypeRow5:
Flow RateRow5:
Time Start StopRow5:
Volume or AreaRow6:
Sample TypeRow6:
Flow RateRow6:
Time Start StopRow6:
Volume or AreaRow7:
Sample TypeRow7:
Flow RateRow7:
Time Start StopRow7:
Volume or AreaRow8:
Sample TypeRow8:
Flow RateRow8:
fill_76:
Volume or Area_2:
Sample Type_2:
Flow Rate_2:
I I:
Volume or AreaI I:
Sample TypeI I:
Flow RateI I:
A:
Volume or Area A:
Sample Type A:
Flow Rate A:
JRow1:

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .