Bid Notice.pdf
PDF 447 KB Posted
- Solicitation number
- 26-049R
- Issued by
- Pueblo County, Colorado
About this file
Summary
This Invitation for Bid (IFB) #26-049R from the City of Pueblo, Colorado seeks a qualified commercial plumbing and/or mechanical contractor to replace eight obsolete Johnson Controls actuator valves serving the hot-water circulation loop in the Administration Building at the Wastewater Reclamation Facility. The project requires compatible replacement valves—Johnson Controls Series M100 or approved equivalents—with 120V power and 24V transformer/thermostat control. The solicitation was released on November 10, 2026, with a mandatory pre-proposal meeting and site visit scheduled for November 17, 2026, at 1:00 PM at the facility located at 1300 S. Queens Ave., Pueblo, Colorado. The deadline for submitting questions is November 24, 2026, at 4:00 PM, and the proposal submission deadline is December 2, 2026, at 10:30 AM. All responses must be submitted electronically through the City's e-procurement portal at https://procurement.opengov.com/portal/pueblo. Attendance at the mandatory pre-proposal meeting is required; bids from non-attendees will be deemed non-responsive. The contract term requires completion within ninety calendar days of Notice to Proceed, with work performed during regular business hours of 7:00 AM to 4:30 PM, Monday through Friday.
Pricing is submitted on a lump-sum basis and must include all labor, materials, equipment, freight, delivery, insurance, overhead, profit, and all incidental work necessary for complete installation. Bidders must demonstrate at least five years of experience with comparable commercial hydronic HVAC control-valve replacement work and provide three references for similar projects completed within the past five years. The contractor must maintain all required licenses, registrations, permits, certifications, and insurance for mechanical, electrical, and controls work in Pueblo, Colorado. Minimum insurance requirements include Workers' Compensation, Commercial General Liability of $1,000,000 per occurrence, and Comprehensive Automobile Liability of $350,000 to $1,000,000. A minimum one-year warranty covering parts and labor is required. Payment terms must be net thirty days or less, with freight F.O.B. Destination and Freight Prepaid. The City is exempt from state and local taxes but the contractor is subject to such taxes on materials used. Award is contingent upon appropriation of funds and issuance of a City purchase order or service agreement. The City reserves the right to reject any or all bids and to award based on the most responsive and responsible bidder whose bid is most advantageous to the City's interests.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INVITATION FOR BID
26-049R
REPLACEMENT OF JOHNSON CONTROLS ACTUATOR VALVES AT
WRF - REBID
City of Pueblo
230 S. Mechanic St.
Pueblo, CO 81003
RELEASE DATE: November 10, 2026
DEADLINE FOR QUESTIONS: November 24, 2026, 4:00 pm
RESPONSE DEADLINE: December 2, 2026, 10:30 am
RESPONSES MUST BE SUBMITTED ELECTRONICALLY TO:
https://procurement.opengov.com/portal/pueblo
City of Pueblo
INVITATION FOR BID
Replacement of Johnson Controls Actuator Valves at WRF - Rebid
I. Introduction II. Notice
III. Specifications IV. General Instructions, Terms and Conditions V. Pricing Proposal
VI. Vendor Questionnaire
Attachments:
A - Sales Tax Letter
Invitation For Bid #26-049R Title: Replacement of Johnson Controls Actuator Valves at WRF - Rebid
1. Introduction
1.1. Summary
The City of Pueblo is seeking a qualified commercial plumbing and/or mechanical contractor to replace eight obsolete Johnson Controls actuator valves serving the hot-water circulation loop in the
Administration Building at the Wastewater Reclamation Facility (WRF). The project requires compatible replacement valves—Johnson Controls Series M100 or approved equal—with 120V power and 24V transformer/thermostat control.
1.2. Background
The City of Pueblo Administration Building’s hot-water circulation system includes eight Johnson
Controls actuator valves installed during the building’s original construction in the late 1980s. These valves regulate hot-water flow in response to heating demands and support the coils serving the building’s air-handling units.
The existing valves have reached the end of their useful service life and are now obsolete. Replacement parts are no longer available, preventing reliable repair or rebuild of the current equipment. To maintain dependable heating-system operation, the City intends to replace all eight valves with Johnson Controls
Series M100 valves, or approved equivalents, compatible with the existing 120V power supply and 24V thermostat-control transformers.
1.3. Contact Information
Teresa May Burns
Director of Purchasing
230 S Mechanic
Pueblo, CO 81003
Email: purchasing@pueblo.us
Phone: (719) 553-2350
Department:
Wastewater
1.4. Timeline
Release Project Date November 10, 2026
Pre-Proposal Meeting (Mandatory) November 17, 2026, 1:00pm
Meeting will be held at the Wastewater
Reclamation Facility Administration Building
Conference Room, 1300 S. Queens Ave., Pueblo, CO 81001. Site visit to follow.
-Bidders are encouraged to bring the personnel that will actually be assigned to the project. Please limit to four (4) people per company.
-Bidders MUST bring their own cameras, notepads, tape measures, recording devices, etc. and take their own measurements, photos, and notes.
-It is the Bidder’s responsibility to obtain all necessary information at the site visit.
Question Submission Deadline November 24, 2026, 4:00pm
Proposal Submission Deadline December 2, 2026, 10:30am
2. Notice
Prospective bidders must attend the pre-bid meeting, and site visit and to verify existing field conditions, including valve locations, sizes, connections, electrical characteristics, controls, access, and clearances. Bidders are responsible for including all labor, materials, equipment, and incidental work necessary for a complete installation. A bid submitted by a bidder that did not attend will be deemed non-responsive.
The City reserves the right to reject any or all bids, waive informalities or defects in bids, and accept the bid determined to be in the City’s best interest. Any award is contingent on appropriation of funds and issuance of a City purchase order or service agreement.
Questions regarding this solicitation must be submitted through the solicitation’s Question-and-Answer section by the stated deadline.
3. Specifications
3.1. Project Requirements
A. The City of Pueblo seeks a qualified commercial mechanical or plumbing contractor to replace eight (8) obsolete Johnson Controls actuator and valves serving the Administration Building hot-water circulation and heating-control system at the Wastewater Reclamation Facility.
B. The work includes field verification; furnishing compatible replacement valves and actuators;
transformers; and thermostats; removal and disposal of existing equipment; installation;
electrical and controls integration; testing and commissioning; training; closeout documentation; and all incidental labor, materials, tools, equipment, permits, and services necessary for a complete operational installation.
C. Bid prices shall include all administration, labor, materials, parts, equipment, freight, delivery, unloading, controls work, insurance, overhead, profit, and other costs required to complete the work.
D. All equipment and workmanship shall be new and of commercial quality. Components not specifically listed but necessary for a complete, safe, and operable installation shall be included.
3.2. Experience and Licensing
A. Bidders must demonstrate at least five (5) years of experience performing comparable commercial hydronic HVAC control-valve replacement or HVAC controls work.
B. Bidders must provide three (3) references for comparable work completed within the past five
(5) years using the Bidder References form in the Vendor Questionnaire.
C. The contractor shall maintain all licenses, registrations, permits, certifications, insurance, and qualified personnel required to perform the mechanical, electrical, and controls work in Pueblo, Colorado.
D. Any subcontractors must be identified in the bid and must meet applicable qualification, licensing, and insurance requirements.
3.3. Minimum Specifications
The requirements below are minimum performance requirements that apply to the replacement valve assemblies.
A. Compatibility. Each proposed assembly must be compatible with the existing hot-water system, piping connections, available installation space, 120V power supply, and existing 24V transformer/thermostat-control arrangement.
B. Approved equipment. Provide Johnson Controls Series M100 equipment, or a City-approved equal.
1. Any proposed equal must be identified in the bid and supported by manufacturer literature demonstrating compatibility with the existing application and controls.
2. Proposed equals shall meet or exceed the specified functionality, ratings, reliability, serviceability, warranty, and compatibility.
3. The Contractor is responsible for all adapters, interfaces, wiring revisions, and incidental work caused by an approved substitution at no additional cost.
C. Field verification.
1. Before ordering equipment, the contractor shall verify each existing valve’s size, configuration, connection type, flow direction, actuator type, control action, electrical characteristics, and clearance requirements.
D. Materials and ratings.
1. Provide new, unused, current-production components. Materials shall be compatible with adjoining piping and shall be protected against galvanic action and corrosion. Provide unions, flanges, adapters, gaskets, fasteners, supports, identification, and service access necessary for maintainability. Valve body, seat, pressure, temperature, and actuator ratings shall be suitable for the verified hot-water service and operating conditions. All electrical components shall be listed or labeled for their intended use where applicable.
E. Submittals.
1. The bidder shall upload product data, cut sheets, wiring/control information, and warranty information in the Vendor Questionnaire. The City may request additional information to evaluate proposed equipment.
F. Warranty.
1. Provide a minimum one-year warranty covering parts and labor.
3.4. General Details
Project management. Designate a project manager as the City’s primary contact. Provide a work schedule and coordinate outages, access, and sequencing with City staff.
A. Schedule. Contractor shall complete all work with in ninety (90) calendar days of Notice to proceed unless otherwise approved by the City.
B. Work hours and coordination. Perform work during regular business hours, 7:00 a.m. to 4:30 p.m., Monday through Friday, unless otherwise approved by the City. Provide advance notice of work that may affect building heating operations or occupant access.
C. Safety and housekeeping. Provide a copy of companies safety plan prior to starting work.
Maintain a safe, orderly work area; protect building finishes and equipment; and remove debris, packaging, and waste upon completion.
D. Permits and compliance. Obtain required permits and inspections and perform the work in accordance with applicable codes, manufacturer instructions, and site safety requirements.
3.5. Contractor Responsibilities
The Contractor's general responsibilities include the following:
A. Perform a site visit and verify existing field conditions prior to commencing work.
B. Provide all labor, materials, equipment, tools, and incidentals necessary to remove and replace eight existing hot-water circulation actuator valves.
C. Remove and properly dispose of the existing Johnson Controls actuator valves in accordance with applicable local, state, and federal regulations.
D. Furnish and install eight new Johnson Controls Series M100 actuator valves, or approved equal, compatible with the existing system configuration.
E. Ensure replacement valves are compatible with:
1. Existing 120V power supply.
2. Existing 24V thermostat-control transformers.
3. Existing hot-water piping and control systems.
F. Modify wiring, mounting hardware, and associated connections as required to provide a complete and fully operational installation.
G. Coordinate system shutdowns with City personnel to minimize disruption to building operations.
H. Refill lines and test each installed valve for proper operation, including actuator functionality, control response, and hot-water flow regulation.
I. Commission the completed installation and verify integration with the existing building heating-control system.
J. Provide startup documentation, operational testing results, and manufacturer product data to the City upon project completion.
K. Note: Completion Requirements - The project shall be considered complete when all eight valves have been installed, tested, adjusted, and demonstrated to operate correctly within the building's heating system, and all affected systems have been restored to normal service.
3.6. Scope of Work
The Contractor shall perform the following:
A. Site assessment - The City makes no representation regarding exact valve dimensions, connection types, or control configurations. Bidders shall determine these conditions through site investigation.
Bid prices shall include all work required to replace the existing valve assemblies with fully functional equivalents compatible with the existing heating-control system.
B. Field verification and planning.
1. The City has identified eight (8) existing Johnson Controls actuator and valve assemblies serving the Administration Building hot-water circulation and heating-control system. Detailed valve schedules, dimensions, connection types, actuator configurations, control characteristics, and field conditions may not be available.
2. Bidders must attend the pre-bid meeting and site visit and shall independently verify all conditions necessary to prepare their bid, including but not limited to:
a. Valve locations;
b. Valve sizes and configurations;
c. Connection types;
d. Piping arrangements;
e. Actuator characteristics;
f. Electrical and control-system interfaces;
g. Access requirements;
h. Ceiling removal and replacement requirements;
i. Space limitations; and
j. Any other conditions affecting the work.
3. Bidders shall verify all locations and conditions during the site visit
a. One valve is located in the mechanical room and serves the heat-exchanger preheat control; the remaining valves are located above nine foot dropped ceilings in various rooms.
b. One valve is located in the Superintendent's Office, two in the Lab, two in the
Lunchroom, and two in the Control Room.
c. Note: Ceiling tiles will be removed, and access provided during the pre-bid meeting walkthrough.
4. Submission of a bid shall constitute acknowledgment that the bidder has satisfied themselves regarding existing conditions and has included all labor, materials, equipment, controls integration, electrical work, access provisions, restoration, and incidental work required to provide a complete and operational installation of all eight (8) replacement valve assemblies, transformers, and new thermostats.
C. Removal and replacement.
1. Coordinate proposed system shutdowns, isolation, draining, refilling and restoration with the City.
2. Isolate and drain piping as necessary; remove and properly dispose of the existing obsolete actuator valves.
3. Provide and install eight (8) compatible replacement valve/actuator assemblies to manufacturer specifications.
4. Install new transformers, and thermostats.
5. Install equipment in accordance with manufacturer instructions and applicable codes.
Restore affected ceilings, and finishes to a neat condition. Repair any damaged ceiling grid metal, (building is to have all ceiling tiles replaced in the future under a separate bid.)
6. The work is intended to be a turnkey replacement of eight (8) existing valve assemblies. The contractor shall furnish and install all materials, fittings, adapters, wiring, transformers, mounting hardware, supports, insulation repairs, and other components required for complete operation regardless of whether individual items are specifically identified in these specifications.
D. Controls integration and commissioning.
1. Connect each replacement assembly to the existing, 120v actuator voltage and 24v wiring. and verify correct response to heating calls and air-handling-unit coil demand.
2. Test each assembly for proper operation, leakage, control response, and safe refilling and restoration of heating service.
3. Provide a commissioning report identifying each valve location, installed equipment, test results, and any City-approved deviations.
E. Training and closeout.
1. Provide basic operation and maintenance training to City maintenance staff.
2. At closeout, clean the work area and provide product data, warranties, and operation and maintenance information.
F. Acceptance.
1. Final acceptance will occur after the City verifies completion of the work and correction of any identified deficiencies.
4. General Instructions, Terms and Conditions
IMPORTANT: Read carefully before submitting bids. Failure to do so shall not release the bidder from the responsibility to perform or deliver as specified.
4.1. APPLICABILITY
Except as otherwise specifically provided in this bid, these General Instructions, Terms and Conditions shall govern the procurement of the items specified in this bid. In the event of a conflict between these
General Instructions, Terms and Conditions, Supplemental Conditions or the specifications of this bid, the order of application shall be the Specifications, Supplemental Conditions and the General
Instructions, Terms and Conditions, and Federal Contract Clauses.
4.2. DEFINITIONS
As used in this bid, the following definitions apply.
A. "Bid/Project No." means all documents, including those attached or incorporated by reference, issued by the Purchasing Department for soliciting offers to provide goods and/or services to the
City.
B. "Bidder" means a business that submits a response to a competitive solicitation.
C. "City" means the City of Pueblo, Colorado.
D. "Contract" means any written agreement for the procurement of goods and/or services. A
Purchase Order issued as a result of the award of this IFB constitutes a contract. By submitting a bid, bidder acknowledges that all terms, conditions, and specifications of this bid will apply.
E. “Contractor” may be used interchangeably with "Vendor/Supplier" meaning a bidder who may be or has been awarded a contract.
F. “Project Manager” means the City Department’s authorized representative assigned to coordinate the contract (purchase order) and all related items for this project.
G. "Purchase Order" means a document issued by the Purchasing Department directing the
Contractor to deliver goods and/or services. The Purchase Order constitutes a contract between the City and Contractor and shall contain all terms, conditions, and specifications from this IFB by reference.
H. "Purchasing Agent" means the person charged with the responsibility of directing the
Purchasing Department. (Used interchangeably with Purchasing Director.)
I. "Responsible Bidder" means a business which has the capability in all respects to perform fully the contract requirements set out in the competitive solicitation, and the integrity and reliability which will assure good faith performance, and who has not violated or attempted to violate any provision of law or ethical conduct. Factors which may be considered in determining the bidder’s capability to perform are, among others, its financial resources, production or service facilities, service reputation and experience. Material failure to perform on one or more previous City contracts or purchase orders is also reason to consider a vendor non-responsible.
J. "Responsive Bid" means a written offer to furnish goods in conformity with standards, specifications, terms, conditions, and all other requirements established in a competitive solicitation.
K. “Successful Bidder” means the lowest Responsible and Responsive Bidder to whom the City, on the basis of its evaluation, makes an award. A Successful Bidder does not become an awarded
Contractor until a purchase order is signed and released by the City’s Purchasing Agent.
4.3. PREPARATION OF BID
A. Submission: All bids must be submitted electronically on the City's e-procurement portal which may be accessed via the Purchasing Department's website or at https://procurement.opengov.com/portal/pueblo. It is the responsibility of the bidder to submit sufficient additional information to allow for a thorough evaluation of the bid submitted.
B. Unit Prices:The unit price for each item offered shall be shown unless otherwise specified. In the case of a discrepancy between the unit price and the extended price, the unit price will prevail in determining the price used for evaluation. Unit prices offered should be for the units specified.
C. References:The City of Pueblo may request a list of at least three references from other companies for which the bidder has provided same or similar goods and/or services.
Contractor’s history, personnel, references, quote, and any other information that becomes available to the City may be utilized as determining factors toward award.
1. The City reserves the right to investigate the references and the past performance of any bidder with respect to its successful performance of similar services, compliance with specifications and contractual obligations, and its lawful payment of suppliers, subcontractors, and workers. The City may postpone the award or execution of the contract after the announcement of the apparent successful Bidder in order to complete its investigation. The City reserves the right to reject any bid response or to reject all bid responses at any time prior to the City’s execution of contract, upon good cause and upon the City’s finding that it is in the City’s best interest.
D. Delivery Time/Scheduled Service Time: Delivery time stated in the specifications shall apply.
Deviations by the bidder must be stated as a specification exception, in the Vendor
Questionnaire. Time, if stated in number of days, will be consecutive calendar days.
E. Payment Terms: Terms of less than thirty (30) days will not be considered. The discount term shall not begin until the goods and/or services have been delivered and accepted and the correct invoice received in the City’s Accounts Payable Office.
F. Freight Policy: Freight will be F.O.B. Destination, Freight Prepaid, unless otherwise specified in this Bid. Exceptions to this policy will not be considered.
G. Taxes: The City is exempt from Federal, State and Local taxes; however, the successful bidder is subject to such taxes on materials used in performing this contract and may not be exempt from such taxes.
H. New Material, Etc.: All materials, supplies, equipment, and vehicles specified in this Bid shall be new, the latest in production and manufactured within the last twelve (12) months (computed from the date and time of offer opening) unless otherwise indicated. This does not apply to materials, supplies, equipment, or vehicles used by the Contractor to provide the required items of tangible personal property, services, or construction.
I. Warranty:Materials furnished by the successful bidder shall be accompanied by the manufacturer’s written warranty against defects in quality, craftsmanship, and materials. The bidder agrees that the items of tangible personal property, services or construction furnished under any contract resulting from this bid shall be covered by the most favorable commercial warranties the bidder gives to any customer for such items. Further, the bidder agrees that the rights and remedies provided in such warranties extend to the City and are in addition to and do not limit any rights afforded to the City by any other clause of this bid. The bidder agrees not to disclaim warranties of fitness for a particular purpose of merchantability. Warranties shall become effective at the time of acceptance.
J. Equivalent Bids: Where a product is characteristic of a sole manufacturer, or where a brand name is indicated in the specifications, it shall be defined to mean "minimum acceptable level" or "minimum quality required" by the City unless the specifications state that no substitutions or approved equivalents will be allowed. If the bidder offers an item other than the one specified, which the bidder considers comparable, the manufacturer’s name and model number of that item must be specified in the bid and sufficient performance specification and descriptive data provided to permit a thorough evaluation. Failure to provide the appropriate information may result in disqualification of the bid.
K. Exception to Specifications: Bidders are to state any exceptions taken to this Bid in the Vendor
Questionnaire. If no exceptions are stated, the bidder is required to furnish the items exactly as specified and to comply with all other requirements of this bid.
L. Patent Indemnity: If any item furnished pursuant to any contract resulting from this bid shall be covered by any patent, copyright, or application for patent or copyright, the bidder shall defend, indemnify and save harmless the City from any and all loss, cost or expense or any and all claims suits, or judgments as a result of the use of such item in violation of rights under such patent, copyright, or application for patent or copyright.
M. Confidentiality:Each bid shall be open to public inspection, except to the extent the bidder designates trade secrets, or other proprietary data to be confidential. Material so designated shall accompany the bid and each page shall be clearly marked and readily separable from the bid in order to facilitate public inspection of the non-confidential portion of the bid. The City shall endeavor to restrict distribution of the material designated as confidential to only those individuals involved in the review and analysis of the bids. Bidders are cautioned that materials designated confidential may nevertheless be subject to disclosure to any citizen under the
Colorado Open Records Act (CORA), 24-72-201 to 24-72-309, C.R.S. All Proposals, including attachments, supplementary materials, addenda, etc. shall become the property of the City and will not be returned to the proposer. Proposals that are copyrighted or marked “CONFIDENTIAL” in their entirety will be rejected and not receive consideration for award.
N. Material Safety Data Sheets: Material safety data sheets may be required for all or part of the products included on this bid to comply with the Occupational Health and Safety Regulation
1910.1200 for general standards on handling hazardous materials. It is the responsibility of the bidder to make this determination and, if required, a copy of the MSDS must accompany the goods when delivered to the end user. Failure to comply with this requirement may cause the delivery of goods to be rejected and all costs related to such action to be borne by the bidder.
4.4. ETHICAL CONDUCT
By submitting its bid in response to this invitation, the bidder certifies that:
A. It has not offered, given, or agreed to give to any City employee or former employee, a gratuity or offer of employment to influence the preparation of or recommendation of award of this bid.
B. It has not retained a person or solicited or secured a City Contract for a contingent fee.
C. It has not taken any action in restraint of free competitive bidding in connection with this bid.
D. It has not in any way violated the ethical conduct or other provisions of the City’s Ordinances or
Codes.
E. It currently has no interest and shall not acquire any interest, direct or indirect, which would conflict in any manner or degree with its performance of any contract resulting from this bid.
4.5. REQUESTS FOR EXPLANATIONS BY BIDDERS
A. Requests for Explanation: Any explanation desired by the bidder regarding the meaning or interpretation of specifications or any part of this bid must be requested in writing through the
Questions & Answer section of this bid posting no later than Tuesday, November 24, 2026 at
4:00 pm.
B. Response to Bids: Oral explanations or instructions given prior to the opening of the offer shall not be binding. The Purchasing Department must issue any official explanations either through the Addenda & Notices or Question & Answer sections of this bid posting on OpenGov.
4.6. ADDENDA
A. Changes or amendments to specifications, conditions, or provisions herein may be initiated only through the Purchasing Department in the form of an addendum which will be posted on the
City's e-Procurement OpenGov Portal which may be accessed via the Purchasing Department's website or at https://procurement.opengov.com/portal/pueblo.
B. Any addenda issued shall become a part of this bid.
C. Addenda must be acknowledged through the OpenGov portal. It is the sole responsibility of the bidder to check the site for any addenda that may be available.
4.7. CLARIFICATION OF BIDS
The City may, during the evaluation of bids, request clarification regarding bids, obtain additional material or literature, and pursue other avenues of research as necessary to ensure that a thorough evaluation is conducted.
4.8. SUBMISSION OF BID
Sealed bids will only be received through the City's e-Procurement Portal which may be accessed via the
Purchasing Department website at www.pueblo.us/purchasing or at https://procurement.opengov.com/portal/pueblo.
4.9. NONDISCRIMINATION AND EQUAL EMPLOYMENT OPPORTUNITY
REQUIREMENTS
In accordance with §1.8 of the Pueblo Municipal Code (entire Code included by reference), all contractors shall meet and comply with the following provisions which shall be contained in all municipal contracts:
A. It is the policy of the City to provide equal opportunity in employment without regard to race, color, religion, sex, sexual orientation, ancestry, disability, age, or national origin. It is hereby deemed and declared to be for the public welfare and in the best interests of the City to require bidders and contractors furnishing and providing work, services, supplies and materials to the
City under municipal contracts not to discriminate in the hiring and promoting of employees in order to further equal employment opportunities for members of minority groups and women.
The contractor will, in all solicitations or advertisements for employees placed by or on behalf of the contractor, state that all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, ancestry, disability, age or national origin. (§1.8.3 of the PMC; Ord. No. 4479, 5-22- 78; Ord. No. 8453 §2, 2-27-12)
B. Federal requirements govern. Whenever the provisions and requirements of this Chapter, or of the bidding specifications, conflict in any way or to any degree with the nondiscrimination and equal employment opportunity requirements of the United States and any such contract under consideration is funded in whole or in part by the United States or is otherwise subject to requirements having the force of law of the United States, such requirements of the United
States shall govern and control. (Ord. No. 4479, 5-22-78)
4.10. WITHDRAWAL OF BIDS
A bid may be withdrawn at any time BEFORE the scheduled opening of bids by un-submitting the proposal.
4.11. OPENING OF BIDS
Bids will be opened through the OpenGov portal by the Purchasing Department at the time identified in this IFB.
4.12. DISQUALIFICATION OF BID
The City reserves the right to reject a bid for, including but not limited to, any one or more of the following circumstances:
A. The bidder has failed to comply with previous contractual commitments or bids to the City.
B. In the opinion of the City, the bidder is not capable of providing the offered goods and/or services as offered or required by the bid or is otherwise not a responsible bidder.
C. The bidder has not provided sufficient or detailed information, which allows for the evaluation of the bid.
D. In the opinion of the City, the offered prices are higher than the prices for which the specified items or services can be purchased on the open market.
E. The bidder failed to properly complete any form and/or attached documents where information or a signature is required.
F. The bidder failed to submit required documents with their bid, other material requirements of the Bid, or has otherwise submitted a non-responsive bid.
G. There are unauthorized additions, conditions, alternate proposals, or other irregularities of any kind, which might make the bid incomplete, indefinite, or ambiguous in meaning.
H. Bid was not submitted as required by the bid documents.
I. The City determines that a bid contains any misrepresentations whatsoever.
4.13. REJECTION/CANCELLATION OF BIDS
Any solicitation, prior to opening or after opening, may be canceled or all bids may be rejected in whole or in part when it is in the best interest of the City. No Proposal shall be accepted from, or contract awarded to, any person, firm or corporation that is in arrears to the City, upon debt or contract or that is a defaulter, as surety or otherwise, upon any obligation to the City, or that may be deemed irresponsible or unreliable by the City. Bidders will be required to submit satisfactory evidence that they have the necessary financial resources and experience to perform and complete the work outlined in this IFB.
4.14. SUSPENSION/DEBARMENT
Bidder acknowledges that as of the solicitation submittal date, neither the Contractor, nor its subcontractor(s), is (1) debarred, suspended, or subject to any proceeding for debarment or suspension with a final determination still pending; declared ineligible or voluntarily excluded (as such terms are defined in any of the Debarment Regulations) from participating in procurement or non-procurement transactions with any Federal, State, or City government department or agency pursuant to any of the
Debarment Regulations, or (2) indicted, convicted or had a Judgment rendered against the Contractor, or its subcontractor(s) for any of the offenses listed in any of the Federal, State, or City’s Debarment
Regulations and no event has occurred and no condition exists that is likely to result in the debarment or suspension of the Contractor, or its subcontractor(s), from contracting with the City of Pueblo, Federal or State government, or any agency or instrumentality thereof.
4.15. MINOR OR TECHNICAL IRREGULARITIES
Minor or technical irregularities in a bid may be waived provided there is no effect on price, quality, or quantity. Clerical errors in a bid may be corrected, if permitted by the Purchasing Agent and are in the best interest of the City.
4.16. NONCONFORMING/CONDITIONAL OR COUNTER BIDS
A bid which is nonconforming or conditional or where the bidder has added unauthorized stipulations, whether in part or in whole will be rejected.
4.17. BID ANALYSIS
The City reserves the right to analyze, examine and interpret any bid for a minimum period of ninety
(90) consecutive calendar days after the scheduled opening date. Bids may not be rescinded during this period except for good cause and with the written approval of the Purchasing Agent. In those situations, where the analysis/evaluation exceeds the ninety (90) consecutive calendar days, bidders may withdraw their bids from consideration.
4.18. AWARD OF PROJECT
A. When Award Occurs:The award of a contract occurs when a Purchase Order is issued or other written evidence of final acceptance by the City is provided to the bidder. A Recommendation of
Award does not constitute award of contract.
B. Basis of Award: If a contract is awarded, it shall be awarded to the most responsive and responsible bidder whose bid is the most advantageous to the City. The City reserves the right to award a contract based on this Bid in total, by group of items, on the basis of individual items, or any combination of these, which in the judgment of the Purchasing Agent, best serves the interests of the City, unless otherwise stated in this bid.
C. Increase of Quantities: The City reserves the right to increase the quantities of items of tangible personal property, services, or construction to be provided within a twelve (12) month period
(unless a longer term of contract is specifically indicated within the bid), under the terms of the
Contract, at the same prices, with the consent of the Contractor.
D. Decrease of Quantities: The City reserves the right to decrease the quantities of items of tangible personal property and/or services to be provided under the terms of the Contract.
However, the Contractor shall be offered an opportunity to cancel the portion of the Contract affected by such a decrease if the Contractor is not able to meet the contracted prices by delivering the decreased amount. This clause shall not have effect if the Contract was originally awarded based on estimated quantities.
E. Contract Changes: In no case shall a contract be changed without the prior written approval of the Purchasing Agent and/or City’s legal counsel.
4.19. PERA
The Contractor shall reimburse the City for the full amount of any employee contribution required to be paid by the City of Pueblo to the Public Employees’ Retirement Association (“PERA”) for salary or other compensation paid to a PERA retiree performing contracted services for the City under this Agreement.
Awarded Contractor will be required to submit a completed Colorado PERA Questionnaire form. This form is available to view at https://www.pueblo.us/DocumentCenter/View/19915/PERA-Form and is included by reference in this document.
4.20. LICENSING REQUIREMENTS
Per City of Pueblo Municipal Ordinance Sections 9-1-2 and 14-4-21, any and all businesses that operate within the City are mandated to be licensed. For questions regarding licensing requirements or to obtain a licensing application please contact the Sales Tax Division at (719) 553-2659. Refer to the Sales Tax
Letter in Attachments.
4.21. TERM
All prices quoted shall be honored through the order, delivery, and acceptance process of the City of
Pueblo.
4.22. INDEMNITIES AND INSURANCE
A. Contractor agrees that it shall procure and will maintain during the term of this Agreement, such insurance as will protect it from claims under workers' compensation acts, claims for damages because of personal injury including bodily injury, sickness or disease or death of any of its employees or of any person other than its employees, and from claims or damages because of injury to or destruction of property including loss of use resulting therefrom; and such insurance will provide for coverage in such amounts as set forth in subparagraph (b).
B. The minimum insurance coverage which Contractor shall obtain and keep in force is as follows:
1. Workers' Compensation Insurance complying with statutory requirements in Colorado and in any other state or states where the work is performed. The Workers’ Compensation
Insurance policy shall contain an endorsement waiving subrogation against the Client.
2. Commercial General Liability Insurance. The Contractor shall secure and maintain during the period of this agreement/contract and for such additional time as work on the project is being performed, Commercial General Liability Insurance issued to and covering the liability of the Contractor with respect to all work performed by Contractor and all their subcontractors under the agreement/ contract, to be written on a comprehensive policy form. This insurance shall be written in amounts not less than $1,000,000 for each occurrence and aggregate for personal injury including death and bodily injury and
$1,000,000 for each occurrence and aggregate for property damage. This policy of insurance shall name the City of Pueblo, its agents, officers and employees as additional insureds. This policy shall have all necessary endorsements to provide coverage without exclusion for explosion and collapse hazards, underground property damage hazard, blanket contractual coverage, as well as Owner’s and Contractor’s Protective Liability (OCP) coverage. The policy shall also provide coverage for contractual liability assumed by Contractor under the provisions of the Agreement/Contract, and “Completed Operations and Projects Liability” coverage.
3. Comprehensive Automobile Liability Insurance. The Contractor shall procure and maintain during the period of the agreement/contract and for such additional time as work on the project is being performed, Comprehensive Automobile Liability Insurance. This insurance shall be written with limits of liability for and injury to one person in any single occurrence of not less than $350,000 and for any injury to two or more persons in any single occurrence of not less than $1,000,000. This insurance shall include uninsured/underinsured motorist coverage and shall protect the Contractor from any and all claims arising from the use both on and off the site of the project of automobiles, trucks, tractors, backhoes and similar equipment whether owned, leased, hired or used by Contractor.
C. Contractor agrees to hold harmless, defend and indemnify Client from and against any liability to third parties, arising out of negligent acts or omissions of Contractor, its employees, subcontractors, and consultants.
D. Certificates of Insurance for Workers’ Compensation Insurance, Commercial General Liability
Insurance and Comprehensive Automobile Liability Insurance shall be filed with the City prior to the execution of the Agreement/contract. Said insurance shall not thereafter be canceled, permitted to expire, or be changed without 30 days advance written notice to the City.
4.23. COMPLIANCE WITH IMMIGRATION REFORM AND CONTROL ACT OF 1986
Contractor certifies that it has complied with the United States Immigration Reform and Control Act of
1986. Contractor represents and warrants that to the extent required by said Act, all persons employed by Contractor for performance of this Agreement have completed and signed Form I-9 verifying their identities and authorization for employment.
4.24. CONTRACTOR REQUIRED SCHEDULES/EXPECTATIONS
Contractor shall provide a well supervised, trained and fully staffed work force at all times to perform the contracted services in a timely and efficient manner. Contractor shall be responsible for providing acceptable staffing levels and employee supervision to ensure all contracted services are satisfactorily performed in the safest, most cost-effective manner possible.
All contracted services/duties shall be performed as scheduled within a reasonable time as agreed upon by contractor and City, using back-up resources as necessary. Contractor is required to fulfill the contract obligations at all locations as they arise. Continued, documented failure to perform the contracted services will be considered a failure to perform and will lead to contract termination.
4.25. CONTACT PERSONS
Contractor shall designate one or more person(s) responsible for the project under this contract. The names, mailing addresses, email addresses, and telephone numbers of such person(s) shall be provided to the City and shall be kept current at all times.
4.26. ITEMS TO BE PROVIDED BY CONTRACTOR
Contractor shall provide all labor, training, supervision, equipment, tools, materials and insurance to perform the services required under this contract in a timely manner. These items shall be furnished by the Contractor at no additional cost to the City.
Contractor shall utilize the most efficient and effective tools and equipment available in the trade in performing the services and tasks identified in this contract. All equipment, tools, supplies and materials shall be of such quality as to pass without objection in the trade and shall meet all current safety, regulatory, finance, security, and environmental standards. Contractor shall regularly inspect all equipment and supplies to ensure each is serviced and maintained according to manufacturer’s schedules and guidelines to ensure safe, efficient operation and effective service results.
4.27. DELIVERY, ACCEPTANCE AND GUARANTEE
A. No bidder, including the bidder to whom an award is made shall deliver any item of tangible personal property, commence services or construction, prior to the issuance of a Purchase
Order issued by the City Purchasing Department, unless a specific Notice to Proceed has been issued by the City.
B. Cancellation for Non-Delivery/Non-Compliance: The City reserves the right to cancel any services not approved by a guaranteed date stipulated in this bid or any contract resulting from this IFB without liability on the City's part.
C. Acceptance: Acceptance by the City of any delivery/service shall not relieve the Contractor of any guarantee or warranty, expressed or implied. Such acceptance of delivery shall not be considered an acceptance of services or materials not in accordance with the specifications.
Such acceptance of delivery shall not waive the City's right to require replacement of defective material or inadequate service.
4.28. INSPECTIONS
A. Prior to Acceptance of Delivery/Service: All items of tangible personal property and/or services shall be provided exactly as offered and may be inspected prior to acceptance of delivery by the
City.
B. Inferior Materials, Etc.: All items of tangible personal property, services, or construction found inferior to the quality specified in this bid, deficient or incorrect in weight, measurement, workmanship, handicraft or otherwise, may be rejected as a whole or in part and then shall be removed by the Contractor at the Contractor's own risk and expense promptly after notice of rejection. The Contractor shall assume responsibility for taking the necessary action to correct or replace the rejected items, within the time frame specified in the notice of rejection.
4.29. CONTRACTOR EVALUATION
The City may evaluate the performance of the Contractor on a regular basis. The purpose of the evaluation is to establish written documentation of the Contractor’s overall performance. Failure to perform in accordance with the terms of one or more contracts or materially unsatisfactory performance of one or more contracts may be justification for disqualifying future bids submitted by the
Contractor.
4.30. INVOICE AND PAYMENTS
The Contractor shall submit an accurate invoice for each purchase. Invoices shall refer to the City’s
Purchase Order Number and shall be itemized unless otherwise specified in this bid. Email invoices to jroper@pueblo.us with copies to lbastian@pueblo.us. Invoices mailed or provided to any other entity will result in a delay in making payment. Contractor is encouraged to inquire if payments due are not received within thirty (30) days after delivery of goods/services and submittal of invoice by contacting the City’s Finance Department, Accounts Payable at 719-553-2648.
4.31. DEFAULT/TERMINATION FOR CAUSE
A. If, through any cause, the Contractor fails to fulfill the Contractor’s obligations under any contract resulting from this Bid in a timely and proper manner, or if the Contractor violates any of the covenants, agreements or stipulations of such contract, the City shall notify the
Contractor of such violations in writing and allow the Contractor a reasonable time, set out in the notice, to correct the default. If the default is not corrected within the specified time period the City shall have the right to cancel the contract and any or all other current contracts with the
Contractor, and, if applicable, to purchase the required goods and/or services from another source or sources. The City shall provide written notice to the Contractor specifying the effective date of cancellation. The notice of cancellation may be contained in the notice of default.
B. If a contract resulting from this bid is canceled, the Contractor shall not be relieved of liability for damages caused by its breach of the contract. The City reserves the right to recover such damages, including, but not limited to, any excess cost incurred in having to purchase contract goods/services from other sources by a deduction from an unpaid balance due to the Contractor or any other legal method available. In addition, the Contractor may be removed from the
Purchasing Department Vendor List or determined to be ineligible to respond to future solicitations, as being not responsible.
4.32. TERMINATION FOR THE CONVENIENCE OF THE CITY
The City may terminate any contract resulting from this bid, at any time, by providing the Contractor with a thirty (30) day written notice of such termination. In such event, the Contractor shall be paid under the terms of the contract for all goods/services provided to and accepted by the City, if ordered or accepted by the City prior to the effective date of termination.
4.33. TERMINATION FOR LACK OF APPROPRIATIONS
Funding for the Contract resulting from this bid must be appropriated by the City Council for the City’s current fiscal year. Notwithstanding any other provisions in the contract resulting from this Bid, continuation of the contract beyond the end of any fiscal year is contingent upon City Council appropriating necessary funds. If sufficient appropriations are not made, the contract may be terminated at the end of the City’s then current fiscal year upon written notice given by the City to the
Contractor. Such termination shall not constitute a default. All payment obligations of the City and all of its interest in the Contract will cease upon the date of termination. The City's decision as to whether sufficient appropriations are available shall be accepted by the Contractor and shall be final.
4.34. COOPERATIVE PROCUREMENT AGREEMENT
The City promotes intergovernmental cooperation of purchases. Any state or local governmental agency reserves the option to purchase any and all items from this bid that are deemed to be in the best interest of the agency if allowed by the Contractor. Other cooperative agencies only have an option to participate off this bid and will be responsible for providing their own requirements. The City does not in any way guarantee the bidder any quantities other than those contracted for by the City in the form of the Purchase Order resulting from this solicitation.
5. Pricing Proposal
GRAND TOTAL BID
Submitted prices are to include all charges for administration, components, equipment, insurance, labor, materials, parts, shipping/handling/delivery/unloading, supplies, tools, profit, overhead, and any other expenses that shall be necessary for the completion of the work for this project.
Line Item Description Unit of Measure Unit Cost
1 Grand Total Bid for removal of existing actuator valves and replacement with new Johnson Control actuator valves and all associated work as outlined in this
Invitation for Bid
Lump Sum
6. Vendor Questionnaire
6.1. Confirmation of Offer and Understanding*
By confirming below, the Bidder, having carefully read and considered the Invitation for Bid (IFB) for the above referenced project, does hereby offer to provide such goods and services on behalf of the City in the manner described and subject to the terms and conditions set forth in the attached IFB. All goods and services shall be provided at the rates set forth in submitted bid.
Proposer acknowledges that the company is qualified to provide these types of goods and services. At any time during the selection and award process, the City may request information substantiating the indicated requirements. Failure to provide this information may result in a bid being declared non-responsive. Bidder acknowledges and accepts that all components of and responses to this IFB will be included and become a part of the final award by reference.
By confirming below, the Bidder further states that this bid is made in good faith and that the prices offered were independently developed and are not founded on, or in consequence of, any collusion, agreement or understanding between themselves or any other interested party.
By confirming below, Bidder certifies that they are an officer or duly authorized agent of the Bidder's company with full power and authority to submit binding offers for the goods or services as specified.
☐ Please confirm
*Response required
6.2. Waiver and Release*
The City may conduct such investigations as the City considers necessary to assist in the evaluation of any proposal to establish the responsibility, qualifications, and financial ability of any potential Proposer to perform the services specified under this RFP within the prescribed time.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .