Attachment_1_-_Special_Notice_BEP-SSR-15-2036.pdf

Attachment -1 - Solicitation Number: BEP-SSR-15-2036 1 | P a g e o f 3

SPECIFIC TASKS: The Offeror(s) shall replace and install the following within six-eight weeks upon award. Offeror(s) is responsible for delivery of all parts within the specified time frame. Contractor shall supply the following parts:

COPE PRESSES 13, 14, 16

UV Dryer Area Title Quantity Unit Serial Number Chain Wheel Bolt 3 PC L5364860

Chain Wheel Bolt 3 PC L5166560

Chain Wheel 6 PC L5161540

Grooved Ball Bearing 6 PC L2502076

Grooved Ball Bearing 6 PC L2502070

Shaft 3 PC L5110601

Chain Wheel 6 PC L5110640

Grooved Ball Bearing 3 PC L2500136

Grooved Ball Bearing 3 PC L2502110

Chain Rail 6 PC L5111110

Chain Rail 6 PC L5111200

Chain Rail 6 PC L5111210

Gripper Chain 6 PC L6354410

Chain Rail 24 PC L5111210

Chain Rail 24 PC L5111200

Guide Bar 2 PC L5163750

Attachment -1 - Solicitation Number: BEP-SSR-15-2036 2 | P a g e o f 3

PART PRESS 903

Guide Rails Rear Turn Area

Chain Rail S1/S2 2 PC L5833951

UV Dryer Area

Chain Rail S1/S2 2 PC L6994050

Chain Rail S1/S2 2 PC L6994060

Chain Rail S1/S2 2 PC L6994100

Chain Rail S1/S2 2 PC L6994110

Chain Rail S1/S2 4 PC L5555028

Chain Rail S1/S2 4 PC L5555038

Chain Rail S1/S2 2 PC L5833858

Chain Rail S1/S2 2 PC L5833868

Transfer Area

Chain Rail S1/S2 2 PC L5833641

Chain Rail S1/S2 2 PC L5833651

Chain Rail S1/S2 2 PC L5833661

Chain Rail S1/S2 2 PC L5833691

Chain Rail S1/S2 2 PC L5833701

Chain Rail S1/S2 2 PC L5833711

Chain Rail S1/S2 2 PC L5833721

Chain Rail S1/S2 2 PC L5833731

Chain Rail S1/S2 2 PC L5833741

Attachment -1 - Solicitation Number: BEP-SSR-15-2036 3 | P a g e o f 3

Rear Turn Area Bearings and Disks

Self-Align Roller Bearing 2 PC L2598020

Disk 2 PC L5831190

Felt Ring 2 PC L2659140

Chain Wheel Shaft

Chain Wheel Shaft 1 PC L5587411

Bearing Arrangement

Rotary Shaft Lip Seal 2 PC L2655351

Grooved Ball Bearing 1 PC L2504340

Taper Roller Bearing 2 PC L2570130

Shim 2 PC L5732130

Gripper Bars

Complete set of fully assembled Gripper Bars including Chains

1 PC L5587527

Slide Block 64 PC L5787130

Shim Ring 64 PC L1847578

Complete Gripper Chain

Gripper Chain 6 PC L5834807

All parts should be new without prior use. The above listing must be provided to specification without replacement.

Offeror will supply all Spare Parts listed above and any additional equipment required to assemble parts. Offeror will provide onsite technical service on all presses and will ensure they are all back in production without fault.

Offeror will warranty spare parts for duration comparable to industry standards, no less than 1-year.