Battery Pack Specifications.doc

Battery Specifications

1. SAFT LSH 14- This requirement is for a single cell SAFT LSH14 Lithium-thionyl chloride high power C-size spiral cell with tabs

a. 3.6v Nominal

b. 5800mah at 15ma, 20c, 2.0 volt cut off

c. Not over 24 months old at delivery (measured from cell manufacturer date)

d. Tabs= solder tabs same side

i. 1.5” long

ii. .005 thick

iii. .25” wide

2. SAFT LSH 20- This requirement is for a single cell SAFT LSH20 Lithium-thionyl chloride high power D-size spiral cell with tabs

a. 3.6v Nominal

b. 13,000mah at 15ma, 20c, 2.0 volt cut off

c. Not over 24 months old at delivery (measured from cell manufacturer date)

d. Tabs= solder tabs same side

i. 1.5” long

ii. .005 thick

iii. .25” wide

3. Battery Pack

a. 4 SAFT LSH 14 cells in parallel

b. 3.6v Nominal per cell (before diode)

c. 5800mah at 15ma, 20c, 2.0 volt cut off per cell

d. Not over 24 months old at delivery (measured from cell manufacturer date)

e. Finished product:

f. Overall assembled Dimension less than 2.1” x 4.2” x 1.3”

g. Each cell protected by one 1N5817 diode

h. Electrical termination with Molex 0436450200 receptacle pin 1 positive

i. Wire (20-24 gauge) measured from battery to Molex connector is 3”

4.2”