Basamid_G_MSDS1n.pdf

SAFETY DATA SHEET1. Identification Basamid® GProduct identifierOther means of identification 431SDS number 533-74-4CAS number 5481-9027Product registrationnumber Dazomet * Tetrahydro-3,5-dimethyl-2H-1,3,5-thiadiazine-2-thione * TemozadSynonyms For pre-planting control of listed weeds, nematodes and solid diseases (see label).Recommended use This is a Restricted Use Pesticide and is for use by licensed applicators only.Do not get this product in contact with water except after incorporation into the soil. Contact withwater generates toxic fumes of Methyl isothiocyanate (MITC).Recommended restrictions EPA: 5481-9027EPA Registration numberManufacturer/Importer/Supplier/Distributor informationManufacturer AMVAC Chemical CorporationAddress Suite 12004695 MacArthur CourtCompany nameWebsiteTelephone AMVAC Chemical Corp 949-260-1200AMVAC Chemical Corp 949-260-6270(FAX)Emergency phone number Medical 888-681-4261CHEMTREC®(USA+Canada) 800-424-9300Product Use 888-462-6822CHEMTREC® (OutsideUSA) +1-703-527-3887E-mail www.amvac.comCustServ@amvac.comNewport Beach, CA 926602. Hazard(s) identification Not classified.Physical hazards Category 4Acute toxicity, oralHealth hazards Not classified.Environmental hazards Not classified.OSHA defined hazardsLabel elementsSignal word WarningHazard statement Harmful if swallowed.Precautionary statementPrevention Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Use personal protective equipment as required. 1 / 10Material name: Basamid® G989 Version #: 3.0 Revision date: Aug-30-2018 Issue date: May-01-2015 SDS US

Response Call a POISON CENTER or doctor/physician if you feel unwell. If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present andeasy to do. Continue rinsing. Collect spillage.Storage Store in a well-ventilated place. Keep container tightly closed. Store locked up. Store away from incompatible materials.Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.Hazard(s) not otherwiseclassified (HNOC) May form combustible dust concentrations in air.Very toxic to aquatic life.Very toxic to aquatic life with long lasting effects.Supplemental information Basamid G is relatively non-toxic in the granular form, but dilution with water causes multipletoxicity concerns due to the formation of Methyl isothiocyanate (MITC), a lachrymator and poison.Solutions have the following health hazards associated with them: Fatal in contact with the skin;Fatal if inhaled; Causes severe skin and eye damage; Causes severe eye damage; May causean allergic skin reaction; Suspected of damaging the fertility or the unborn child.3. Composition/information on ingredientsSubstances CAS number %Chemical name Common name and synonymsDazometTetrahydro-3,5-dimethyl-2H-1,3,5-thiadiazine-2-thione Temozad 533-74-4Dazomet ≥ 99.0Decomposition Common name and synonyms CAS number %Chemical name 556-61-6Methyl isothiocyanate (MITC)Impurities Common name and synonyms CAS number %Chemical name N/A ≤ 1.0Related Compound4. First-aid measures Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen orartificial respiration if needed. Do not use mouth-to-mouth method if victim inhaled the substance.Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or otherproper respiratory medical device. Call a physician if symptoms develop or persist.Inhalation Wash off with soap and water. Get medical attention if irritation develops and persists. Washcontaminated clothing before reuse. Do not breathe fumes generated by the solution of the solidsin water.Skin contact Do not rub eyes. Immediately flush eyes with plenty of water for at least 15 minutes. Removecontact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritationdevelops and persists. Do not breathe fumes generated by the solution of the solids in water.Eye contact Get medical advice/attention if you feel unwell. Rinse mouth. Do not induce vomiting. If vomitingoccurs, keep head low so that stomach content doesn't get into the lungs. Never give anything bymouth to a victim who is unconscious or is having convulsions.Ingestion Dazomet granules: None known.Dazomet solution in water (generates MITC): Burning pain and severe corrosive skin damage.Causes serious eye damage. Symptoms may include stinging, tearing, redness, swelling, andblurred vision. Permanent eye damage including blindness could result.Most importantsymptoms/effects, acute anddelayed Exposure to Basamid G (Dazomet) granules is minimally toxic and patient should be treatedsymptomatically. If patient is exposed to solutions of Basamid G in water, the patient should betreated for MITC poisoning. Contact a poison control center for additional information.Indication of immediatemedical attention and specialtreatment needed Take off immediately all contaminated clothing. IF exposed or concerned: Get medicaladvice/attention. If you feel unwell, seek medical advice (show the label where possible). Ensurethat medical personnel are aware of the material(s) involved, and take precautions to protectthemselves. Show this safety data sheet to the doctor in attendance. Wash contaminated clothingbefore reuse. Discard any shoes or clothing items that cannot be decontaminated.General information 2 / 10Material name: Basamid® G989 Version #: 3.0 Revision date: Aug-30-2018 Issue date: May-01-2015 SDS US

5. Fire-fighting measures Powder. Foam. Carbon dioxide (CO2).Suitable extinguishing media Dilution with water may cause generation of flammable and toxic fumes of MITC. See ChemicalStability information in SECTION 10.Unsuitable extinguishingmedia During fire, gases hazardous to health may be formed.Specific hazards arising fromthe chemical Self-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipmentand precautions for firefighters Use water spray to cool unopened containers.Fire fightingequipment/instructions Self-contained breathing apparatus and full protective clothing must be worn in case of fire.Specific methods This product will produce vapors of Methyl isothiocyanate (MITC), a flammable and toxiccompound, when diluted with water.General fire hazards6. Accidental release measuresKeep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wearappropriate protective equipment and clothing during clean-up. For personal protection, seesection 8 of the SDS. Do not breathe dust. Do not touch damaged containers or spilled materialunless wearing appropriate protective clothing. Ensure adequate ventilation. Local authoritiesshould be advised if significant spillages cannot be contained.Personal precautions,protective equipment andemergency procedures Do not get water on spilled substance or inside containers. Wear appropriate protective equipmentand clothing during clean-up. Avoid dispersal of dust in the air (i.e., clearing dust surfaces withcompressed air). This material is classified as a water pollutant under the Clean Water Act andshould be prevented from contaminating soil or from entering sewage and drainage systems whichlead to waterways. Prevent product from entering drains.Large Spills: Shovel the material into waste container. Treat the remaining spill as a small spill.Small Spills: Absorb in vermiculite, dry sand or earth and place into containers. Sweep up orvacuum up spillage and collect in suitable container for disposal.Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.Methods and materials forcontainment and cleaning up Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Avoiddischarge into drains, water courses or onto the ground. Inform appropriate managerial orsupervisory personnel of all environmental releases.Environmental precautions7. Handling and storage Obtain special instructions before use. Do not handle until all safety precautions have been readand understood. Minimize dust generation and accumulation. Do not breathe dust. Do not get ineyes, on skin, or on clothing. Do not taste or swallow. When using, do not eat, drink or smoke.Pregnant or breastfeeding women must not handle this product. Should be handled in closedsystems, if possible. Use only outdoors or in a well-ventilated area. Wear appropriate personalprotective equipment. Wash hands thoroughly after handling. Avoid release to the environment.Wash contaminated clothing before reuse.Precautions for safe handling Store in a cool, dry place out of direct sunlight. Store locked up. Store in original tightly closedcontainer. Store in a well-ventilated place. Store away from incompatible materials (see Section 10of the SDS). Keep away from food, drink and animal feedingstuffs.Conditions for safe storage,including any incompatibilities8. Exposure controls/personal protectionThis substance has no PEL, TLV, or other recommended exposure limit.Occupational exposure limits No biological exposure limits noted for the ingredient(s).Biological limit values Good general ventilation (typically 10 air changes per hour) should be used. Ventilation ratesshould be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,or other engineering controls to maintain airborne levels below recommended exposure limits. Ifexposure limits have not been established, maintain airborne levels to an acceptable level. Eyewash facilities and emergency shower must be available when handling this product.Appropriate engineeringcontrolsIndividual protection measures, such as personal protective equipmentWear safety glasses with side shields (or goggles) and a face shield.Eye/face protectionSkin protection Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glovesupplier.Hand protection Wear appropriate chemical resistant clothing (see label).Other 3 / 10Material name: Basamid® G989 Version #: 3.0 Revision date: Aug-30-2018 Issue date: May-01-2015 SDS US

Use a NIOSH/MSHA approved respirator if there is a risk of exposure to dust/fume at levelsexceeding the exposure limits. Use a positive-pressure air-supplied respirator if there is anypotential for an uncontrolled release, exposure levels are not known, or any other circumstanceswhere air-purifying respirators may not provide adequate protection. The label should be consultedfor more specific information with regards to respiratatory protection.Respiratory protection Wear appropriate thermal protective clothing, when necessary.Thermal hazards Keep away from food and drink. Always observe good personal hygiene measures, such aswashing after handling the material and before eating, drinking, and/or smoking. Routinely washwork clothing and protective equipment to remove contaminants. Contaminated work clothingshould not be allowed out of the workplace.General hygieneconsiderations9. Physical and chemical properties Appearance Solid.Physical state Solid. Dry flowable granules.Form WhiteColor Minor sulfur-like odorOdorOdor threshold Not available.pH Not available.Melting point/freezing point 222.8 °F (106 °C) (decomposes)Initial boiling point and boilingrange Not available.Flash point 199 °F (93 °C)Evaporation rate Not available.Not available.Flammability (solid, gas)Upper/lower flammability or explosive limitsFlammability limit - lower(%) Not available.Flammability limit - upper(%) Not available.Explosive limit - lower (%) Not available.Explosive limit - upper (%) Not available.Vapor pressure 4.00E-07 kPa at 20 °CVapor density Not available.Relative density 1.3 g/cm3 at 20 °CSolubility(ies)Solubility (water) Not available.Partition coefficient(n-octanol/water) 0.15Auto-ignition temperature Not available.Decomposition temperature Not available.Viscosity Not available.Other informationDensity 1.30 g/cm3 estimated at 20 °CMolecular formula C5-H10-N2-S2Molecular weight 162.28 g/mol10. Stability and reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity Material is stable under normal conditions.Dazomet decomposes, when diluted with water, to methyl isothiocyanate (MITC, a lachrymator andmoderate poison) . Use the solution promptly after mixing. Do not allow the solution to stand.Dazomet can also decompose to carbon disulfide, monomethylamine, and formaldehyde (all highlyflammable) if contacted with a strong acid.Chemical stability 4 / 10Material name: Basamid® G989 Version #: 3.0 Revision date: Aug-30-2018 Issue date: May-01-2015 SDS US

Hazardous polymerization does not occur.Possibility of hazardousreactions Contact with incompatible materials.Conditions to avoid Acids. Water.Incompatible materials Dazomet will decompose in water solutions to give MITC. In contact with strong acids it willdecompose to carbon disulfide (CS2), methylamine, and formaldehyde.Hazardous decompositionproducts11. Toxicological informationInformation on likely routes of exposureInhalation Dazomet granules: No adverse effects due to inhalation are expected.Dazomet solution in water (generates MITC): Fatal if inhaled.Skin contact Dazomet granules: Not a skin irritant or skin sensitizer. Dazomet solution in water (generatesMITC): Fatal in contact with skin. Causes severe skin burns. May cause an allergic skin reaction.Eye contact Dazomet granules: Not an eye irritant.Dazomet solution in water (generates MITC): Causes serious eye damage.Ingestion Dazomet granules: Harmful if swallowed.Dazomet solution in water (generates MITC): Toxic if swallowed. Causes digestive tract burns.Symptoms related to thephysical, chemical andtoxicological characteristics Dazomet granules: None known.Dazomet solution in water (generates MITC): Burning pain and severe corrosive skin damage.Causes serious eye damage. Symptoms may include stinging, tearing, redness, swelling, andblurred vision. Permanent eye damage including blindness could result.Information on toxicological effectsAcute toxicity Dazomet granules: Harmful if swallowed.Dazomet aqueous solution (generates MITC): Fatal if inhaled. Fatal in contact with skin. Toxic ifswallowed. May cause an allergic skin reaction. Test ResultsProduct SpeciesDazomet (CAS 533-74-4)DermalAcuteLD50 Rabbit > 2000 mg/kgInhalationLC50 Rat 8.4 mg/l/4hMistOralLD50 Rat 519 mg/kgTest ResultsDecomposition SpeciesMethyl isothiocyanate (MITC) (CAS 556-61-6)DermalAcuteLD50 Rabbit 33 mg/kgInhalationLC50 Rat 1.9 mg/l, 1 HoursOralLD50 Rat 175 mg/kgDazomet granules: Non irritating to skin.Dazomet solution in water (generates MITC): Causes severe skin burns and eye damage.Skin corrosion/irritation Dazomet granules: Non-irritating (rabbit).Dazomet solution in water (generates MITC): Causes serious eye damage.Serious eye damage/eyeirritationRespiratory or skin sensitizationRespiratory sensitization Not a respiratory sensitizer. 5 / 10Material name: Basamid® G989 Version #: 3.0 Revision date: Aug-30-2018 Issue date: May-01-2015 SDS US

Dazomet granules: Not a skin sensitizer.Dazomet solution in water (generates MITC): May cause an allergic skin reaction.Skin sensitization No data available to indicate product or any components present at greater than 0.1% aremutagenic or genotoxic.Germ cell mutagenicityCarcinogenicityIARC Monographs. Overall Evaluation of CarcinogenicityNot listed.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)Not listed.US. National Toxicology Program (NTP) Report on CarcinogensNot listed. Dazomet granules: Not classified.Dazomet solution in water (generates MITC): Suspected of damaging fertility or the unborn child.Reproductive toxicitySpecific target organ toxicity -single exposure Not classified.Specific target organ toxicity -repeated exposure Not classified.Aspiration hazard Not an aspiration hazard.12. Ecological information Very toxic to aquatic life. Very toxic to aquatic life with long lasting effects.EcotoxicityProduct Test ResultsSpeciesDazomet (CAS 533-74-4)Aquatic LC50Crustacea 1.4 - 2 mg/l, 96 hoursHarpacticoid copepod (Nitocra spinipes)LC50Fish 45 - 50 mg/l, 96 hoursBleak (Alburnus alburnus) 0.28 mg/l, 48 hoursHarlequinfish, red rasbora (Rasboraheteromorpha)Decomposition Test ResultsSpeciesMethyl isothiocyanate (MITC) (CAS 556-61-6)Aquatic LC50Crustacea 0.18 - 0.56 mg/l, 48 hoursWater flea (Daphnia magna) 0.032 - 0.1 mg/l, 14 daysProduct decomposes rapidly in wet environments.Persistence and degradability Bioaccumulation is unlikely. Bioaccumulative potentialPartition coefficient n-octanol / water (log Kow)Dazomet 0.15This product decomposes when diluted with water and the decomposition products will leach fromthe soil.Mobility in soilOther adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creationpotential, endocrine disruption, global warming potential) are expected from this component.13. Disposal considerationsCollect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allowthis material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditcheswith chemical or used container. Dispose of contents/container in accordance withlocal/regional/national/international regulations.Disposal instructions Dispose in accordance with all applicable regulations.Local disposal regulations The waste code should be assigned in discussion between the user, the producer and the wastedisposal company.Hazardous waste code Dispose of container and residues in accordance with all applicable regulations. Empty containersor liners may retain some product residues. This material and its container must be disposed of ina safe manner (see: Disposal methods/information). Avoid discharge into water courses or ontothe ground.Waste from residues / unusedproducts 6 / 10Material name: Basamid® G989 Version #: 3.0 Revision date: Aug-30-2018 Issue date: May-01-2015 SDS US

Since emptied containers may retain product residue, follow label warnings even after container isemptied. Empty containers should be taken to an approved waste handling site for recycling ordisposal.Contaminated packaging14. Transport informationDOT UN3077UN number Environmentally hazardous substances, solid, n.o.s. (Dazomet)UN proper shipping name 9ClassTransport hazard class(es) -Subsidiary risk 9Label(s) IIIPacking group NoMarine pollutantEnvironmental hazards Read safety instructions, SDS and emergency procedures before handling.Special precautions for user 8, 146, 335, A112, B54, IB8, IP3, N20, T1, TP33Special provisions 155Packaging exceptions 213Packaging non bulk 240Packaging bulkIATA UN3077UN number Environmentally hazardous substance, solid, n.o.s. (Dazomet)UN proper shipping name 9ClassTransport hazard class(es) -Subsidiary risk IIIPacking group Yes, when transported over large bodies of waterEnvironmental hazards 9LERG Code Read safety instructions, SDS and emergency procedures before handling.Special precautions for user Allowed with restrictions.Passenger and cargoaircraftOther information Allowed with restrictions.Cargo aircraft onlyRead safety instructions, SDS and emergency procedures before handling.IMDG UN3077UN number ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Dazomet), MARINEPOLLUTANTUN proper shipping name 9ClassTransport hazard class(es) -Subsidiary risk IIIPacking group YesMarine pollutantEnvironmental hazards F-A, S-FEmS Read safety instructions, SDS and emergency procedures before handling.Special precautions for user Not applicable.Transport in bulk according toAnnex II of MARPOL 73/78 andthe IBC CodeDOT; IATA; IMDG 7 / 10Material name: Basamid® G989 Version #: 3.0 Revision date: Aug-30-2018 Issue date: May-01-2015 SDS US

Marine pollutant IMDG Regulated Marine Pollutant.This product is not regulated when shipped by highway, rail, or air in non-bulk packaging(maximum capacity of 450 L (119 gallons) or less. When shipped by vessel or in bulk packagingthis product is regulated according to the data shown.General information15. Regulatory information This product is a "Hazardous Chemical" as defined by the OSHA Hazard CommunicationStandard, 29 CFR 1910.1200.This product is registered under EPA/FIFRA Regulations as a RESTRICTED USE PESTICIDE. Itis a violation of Federal Law to use this product in any manner inconsistent with its labeling. Readand follow all label directions. This product is excluded from listing requirements under EPA/TSCA.This is a pesticide product registered by the United States Environmental Protection Agency and issubject to certain labeling requirements under federal pesticide law. These requirements differfrom the classification criteria and hazard information required for safety data sheets (SDS), andfor workplace labels of non-pesticide chemicals. The hazard information required on the pesticidelabel is reproduced below. The pesticide label also includes other important information, includingdirections for use.HAZARD TO HUMANS AND DOMESTIC ANIMALS.DANGER: Restricted Use Product. Fatal if absorbed through skin. Corrosive. Causes skin burnsand irreversible eye damage, Do not get in eyes, on skin, or on clothing. Do not breathe vapors orspray mist. Prolonged or frequently repeated skin contact may cause allergic reactions in someindividuals.ENVIRONMENTAL HAZARDSThis pesticide is toxic to fish and invertebrates. Do not apply directly to water, or to areas wheresurface water is present or to intertidal areas below the mean high water mark. Drift and runofffrom treated areas may be hazardous to aquatic organisms in neighboring areas. Do not applywhen weather conditions favor drift from the treated area. Do not contaminate water whendisposing of equipment washwaters.Dazomet has certain properties and characteristics in common with chemicals that have beendetected in groundwater Dazomet is highly soluble in water and has low adsorption to soil).For untarped applications, leaching and runoff may occur if there is heavy rainfall after soilfumigation.US federal regulationsToxic Substances Control Act (TSCA)TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)Not regulated.CERCLA Hazardous Substance List (40 CFR 302.4)Not listed.SARA 304 Emergency release notificationNot regulated.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)Not listed. 8 / 10Material name: Basamid® G989 Version #: 3.0 Revision date: Aug-30-2018 Issue date: May-01-2015 SDS US

SARA 302 Extremely hazardous substanceSuperfund Amendments and Reauthorization Act of 1986 (SARA)Chemical name CAS number Reportablequantity(pounds) Thresholdplanning quantity(pounds) Thresholdplanning quantity,lower value(pounds) Thresholdplanning quantity,upper value(pounds)Methyl isothiocyanate(MITC) 556-61-6 500 500YesSARA 311/312 Hazardouschemical Acute toxicity (any route of exposure)Classified hazardcategoriesSARA 313 (TRI reporting)Chemical name % by wt.CAS numberDazomet ≥ 99.0533-74-4Other federal regulationsClean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) ListNot regulated.Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)Not regulated. Not regulated.Safe Drinking Water Act(SDWA)US state regulationsCalifornia Proposition 65California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This materialis not known to contain any chemicals currently listed as carcinogens or reproductive toxins. Formore information go to www.P65Warnings.ca.gov.International InventoriesCountry(s) or region Inventory name On inventory (yes/no)*YesCanada Domestic Substances List (DSL) YesEurope European Inventory of Existing Commercial ChemicalSubstances (EINECS) YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governingcountry(s).16. Other information, including date of preparation or last revisionMay-01-2015Issue date Aug-30-2018Revision date ACGIH®: American Conference of Governmental Industrial Hygienists CERCLA: Comprehensive Environmental Response, Compensation, and Liability Act EPA: Environmental Protection Agency FIFRA: Federal Insecticide, Fungicide, and Rodenticide Act IARC: International Agency for Research on Cancer NTP: National Toxicology Program OSHA: Occupational Safety and Health Agency SARA: Superfund Amendments and Reauthorization Act TSCA: Toxic Substances Control Act DOT: Department of Transportation IMDG: International Maritime Dangerous Goods IATA: International Air Transport AssociationReferencesVersion # 3.0Health: 2Flammability: 0Physical hazard: 0HMIS® ratings Health: 2Flammability: 0Instability: 0NFPA ratings 9 / 10Material name: Basamid® G989 Version #: 3.0 Revision date: Aug-30-2018 Issue date: May-01-2015 SDS US

This information is provided for the limited guidance to the user. While AMVAC believes that theinformation is, as of the date hereof, reliable, it is the user’s responsibility to determine thesuitability of the information for its purposes. The user is advised not to construe the informationas absolutely complete since additional information may be necessary or desirable whenparticular, exceptional, or variable conditions or circumstances exist (like combinations with othermaterials), or because of applicable regulations. No express or implied warranty of merchantabilityor fitness for a particular purpose or otherwise is made hereunder with respect to the informationor the product to which the information relates.AMVAC Chemical Corporation cannot anticipate all conditions under which this information and itsproduct, or the products of other manufacturers in combination with its product, may be used. It isthe user’s responsibility to ensure safe conditions for handling, storage and disposal of theproduct, and to assume liability for loss, injury, damage or expense due to improper use.©2018 AMVAC Chemical Corporation. All Rights Reserved. AMVAC and the AMVAC Logo aretrademarks owned by AMVAC Chemical Corporation.Basamid is a U.S. registered trademark of Kanesho Soil Treatment SPRL/BVBA.ACGIH is a trademark of the American Conference of Governmental Industrial Hygienists.CHEMTREC is a trademark of the American Chemistry Council, Inc.HMIS is a trademark of the American Coatings Association.NFPA is a trademark of the National Fire Protection Association, Inc.Disclaimer Product and Company Identification: Product and Company IdentificationToxicological information: Eye contactToxicological information: Eye contactTransport information: IMDG classificationTransport information: IATA classificationRegulatory information: California Proposition 65Other information, including date of preparation or last revision: DisclaimerRevision information 10 / 10Material name: Basamid® G989 Version #: 3.0 Revision date: Aug-30-2018 Issue date: May-01-2015 SDS US