BAS HMI - SOW.pdf

Upgrade HMI, FIN and Niagara

USCG Base Kodiak, AK

SCOPE

The work to be performed under this contract is for the upgrade of the Building Automation System HMI, and the associated FIN and Niagara licenses, located on the USCG Base Kodiak, Alaska.

The HMI shall be installed on the second floor of the Administration Building (N38) in the drafting room. The HMI shall be installed in a 9U type IT rack along with a UPS and a firewall switch (all rack mounted). The HMI will be setup with VMware to virtualize all the different BAS systems (R2 / Niagara 4 / FINstack / Electrical metering). All existing BAS systems licenses shall be moved and upgraded to the new HMI.

Work shall also include the upgrade of the FINstack program from 4.5 to version 5. This shall include a 1 year license maintenance agreement with enough points necessary to cover the total license points on Base Kodiak.

A copy of Niagara workbench shall be provided for the HMI with a 3 year license maintenance agreement. This is required for all the Niagra 4 Jace’s that are currently installed.

Buildings that require Niagara license upgrades:

B2 - Jace 700 shall be replaced with Jace 8000 / 3 year license / ASD driver

B3 - 3 year license for each Jace (x2)

B4 - 3 year license for each Jace (x2)

B5 - 3 year license for each Jace (x2)

B7 - 3 year license for each Jace (x2)

B14 - 3 year license for each Jace (x2) / ASD driver

B15 - 3 year license for each Jace (x4)

B20 - 3 year license for each Jace (x8)

B54 - 3 year license for each Jace (x4)

B515 - 3 year license for each Jace (x2)

B576 - 3 year license for each Jace (x4)

B597 - 3 year license for each Jace (x2)

GENERAL REQUIREMENTS

The Contractor shall provide all materials, equipment, transportation, supervision, labor, and tools, required to provide all technical services and programming support to upgrade the above noted Building Automation System.

All contractor technicians (working on the USCG system) must have the following certifications and must provide documentation of the following:

a) Tridium Honeywell Niagara 4 Certifications, having experience installing in a campus setting with the

Tridium Niagara 4 platform.

b) FIN 4.0 / 5.0 Certification.

c) Honeywell factory training on the Spyder platform.

d) Tridium Niagara R2 Certifications with a minimum of 10 years R2 programming experience.

e) Factory training on the Barber Coleman/Invensys Network 8000 system.

The Contractor is responsible for complying with all manufacturers’ requirements, vendor certifications, software licenses and best management practices.