Barrier Wall Salient Characteristics.pdf

This document is a product specification sheet for a Barrier Wall system used in controlled environments. The barrier wall is constructed with a 1" square anodized aluminum frame and 2mm fully bonded fiberglass reinforced plastic (FRP) panels, weighing 18 to 40 lbs depending on configuration. The system is available in five width options: 12", 18", 24", 36", and 48", with telescoping panels that extend from 6'10" to 10'3" in height.

The system features airtight seals between panels, ceiling, and floor via top and bottom gaskets, and includes concealed height locks that prevent accidental loosening. Installation uses a simple toolless, knobless lift-and-drop connection mechanism with a 360-degree T-slot attachment system and ceiling grid attachment options. The panels are chemically bonded to the frame to prevent separation, and the overall design is durable and lightweight without risk of scratching or denting. The product exceeds ICRA IV (Infection Control Risk Assessment) requirements and weighs approximately half that of a comparable RealWall™ product, making it suitable for healthcare and controlled environment applications.