B262_Furniture Specifications.pdf

TYPE B (F ina l ) – FURNITURE SPECIF ICATIONS

NEW HAMPSHIRE AIR NATIONAL GUARD

Building 262 Furniture Design Pease ANGB, Newington, New Hampshire

Prepared By:

Task Order No. W912TF-21-F-5302

A/E Contract No. W912TF-18-D-5000

Prepared For:

Department of the Army and Air Force New Hampshire National Guard Joint Contracting Office 302 Newmarket Street Pease ANGB New Hampshire, 03803-0157

June 14, 2021

Type B (100%) Furniture Specifications • NHANG • Building 262 Furniture Design

Pease ANGB, Newington, NH • June 14, 2021 • Table of Contents

Table of Contents

PRODUCT SPECIFICATIONS Section 1

Seating

Tables

Storage & Filing

Workstations

Casegoods

Accessories

PRODUCT SUMMARY AND PROBABLE COST Section 2

FLOOR PLANS / DRAWINGS Section 3

PRODUCT SPECIFICATIONS Section 1

Seating

Tables

Storage & Filing

Workstations

Casegoods

Accessories

SEATING

ALL SEATING/ Zip Conference Chair

CH‐3 26”w x 26”d x 38.5”h

Back: Mid‐back Control: Synchro‐tilt Base: Aluminum caster base Arms: Fixed aluminum with black polyurethane arm caps.

Finish: Black leather front and black faux leather back.

KIMBALL / Joya Chair

CH‐4 26.25”w x 23”d x 43.25”h

High‐performance, long‐term seating with a full complement of adjustments; for computer work, general office work, and casual or formal meetings.

Basic Synchro‐tilt 1‐position lock control Back: Standard black mesh Adjustable lumbar support Seat: Upholstered grade 3 fabric; 3” molded, CFC‐free, urethane foam applied over plywood with sewn‐upholstered seat and waterfall front edge.

2D arms – height adjustable with front to back adjustable arm pads, black; soft, self‐ skinning polyurethane foam molded over a steel core.

Black hard dual wheel casters Black frame Five prong black base Fabric: To be selected

KI INC / Lyra Parlor Chair

CH‐5 29”w 30.25”d 31.5”h

Seat frame construction: 1” laminated hardwood plywood.

Arms: 1/2’ thick laminated hardwood plywood reinforced with 1” laminated hardwood plywood. Arms are held in place with metal clips and wood screws through the bottom.

8/4 Select beech hardwood dried to a moisture content of less than 6% with mortise and tenon. Double doweled cross rails with corner blocks.

Cushion foam: 4.5” thick Ultracell premium polyurethane foam, contour cut with .5” wrap covers on the front and top of seat.

Arm foam: 1.25” tick Volare self‐skinned foam.

Finishes: Frame chrome plated, fabric to be selected from grade G

KIMBALL / Joya Side Chair

CH‐6 21”w x 22.75”d x 33”h

Mobile, flexible, and refined side chair. This chair is ideal for a variety of office spaces, from multipurpose rooms to individual workstations.

Back: Standard black mesh.

Seat: Upholstered grade 3 fabric; 2” molded, CFC‐free, urethane foam applied over plywood with sewn‐upholstered seat and waterfall front edge.

Black polyurethane arms Carpet glides Black frame Fabric: To be selected

KIMBALL / Event Stacking Chair

CH‐7 19.75”w x 21”d x 32”h (without arms on casters)

Stacking chair shall have four‐leg straight base Lightweight and mobile, and capable of stacking up to 6‐chairs high Back: 3⁄4"‐thick foam for the inside back and 1⁄4" thick foam for the outside back both fabric covered. Back secured to the frame with 4 countersunk flat‐head screws, 11‐ gauge steel plates, and T‐nuts. Flair back model constructed using 7‐ply, molded plywood.

Seat: High resilience, CFC free polyurethane foam. Seat cushion is 11⁄4" thick, waterfall front edge, fabric covered. Seat is contoured, blow‐molded polyethylene.

Channels within the seat pan fit over the cross members. Seat pan is attached to the seat frame with four machine screws and T‐nuts.

Arms: Injection molded nylon and attached to the frame with a pressure fit.

Frame: 7⁄8" diameter, 14‐gauge tubular steel. Cross members are 3⁄4" diameter, 14‐ gauge steel. Leg frames are joined to the cross members with metal inert gas (MIG) welds. Color platinum metallic.

Chair glides.

Fabric to be selected from grade 1

KI INC / Lyra Parlor Loveseat

L‐1 45.75”w 30.25”d 31.5”h

Seat frame construction: 1” laminated hardwood plywood.

Arms: 1/2’ thick laminated hardwood plywood reinforced with 1” laminated hardwood plywood. Arms are held in place with metal clips and wood screws through the bottom.

8/4 Select beech hardwood dried to a moisture content of less than 6% with mortise and tenon. Double doweled cross rails with corner blocks.

Cushion foam: 4.5” thick Ultracell premium polyurethane foam, contour cut with .5” wrap covers on the front and top of seat.

Arm foam: 1.25” tick Volare self‐skinned foam.

Finishes: Frame chrome plated, fabric to be selected from grade G.

TABLES

NATIONAL OFFICE FURNITURE / Marnia Side Table

T‐1 24” round dia. 22”h

Top: 1” thick high‐pressure laminate (HPL) top with matching 3mm PVC edge band.

Legs: Painted metal X base.

KIMBALL / Dock Meeting Table

T‐2 36” x 36” x 28”h

One piece, HPL Laminate top with self‐edge rim (color to be selected).

Base: Disc base 3" diameter column with round disc base with adjustable glides.

NATIONAL OFFICE FURNITURE / Marnia Coffee Table

T‐3 30” round dia. 16”h

Top: 1” thick high‐pressure laminate (HPL) top with matching 3mm PVC edge band.

Legs: Painted metal X base.

KIMBALL / Dock Meeting Table

T‐5 120”w x 48”d x 28”h (two‐pieces) T‐6 72”w x 36”d x 28”h (no power/data) T‐7 96”w x 42”d x 28”h

Tops: Racetrack table with two E2X power/data centers with factory installed cutouts and metal vertical cable manager and horizontal cable management.

One piece, HPL Laminate top with self‐edge rim (color to be selected).

Base: Blade Y single column 2 3⁄8"diameter, 10‐gauge tubular steel with a cast aluminum foot with glides. Finish polished aluminum.

KI Inc / Pirouette Table

T‐8 60”w 30”d 29”h T‐9 48”w 30”d 29”h

Flip to table on casters Tabletops: 1 ¼” overall thickness with .030” overall high‐pressure laminate top surface with 2mm molded edge.

Flipping/Nesting frame: 30 mm x 50 mm x 3 mm thick wall steel tubing, with 4 mm thick formed steel support hubs welded to the tubes for mounting legs. Latch mechanism to release latch to lift tabletop for nesting storage.

Casters: Two mobile and two locking 2.5” dia. medium hard casters.

Finish: To be selected

STORAGE & FILING

KIMBALL / Stow Credenza with Platform Base

CR‐1 72”w x 21”d x 36”h CR‐2 48”w x 21”d x 36”h

Frame Construction: Plywood with TFL top and chassis with touch‐ latch doors and drawers. Hinged doors with adjustable shelves.

Finished back.

Base: Platform base in TFL finish with adjustable glides.

KIMBALL / Lateral File Cabinet

FC‐1 4‐draw 36”w x 18”d x 51.125”h FC‐2 2‐draw 36”w x 18”d x 27.25”h

Four‐draw lateral file construction features coach seam welds. Right angle bend of the coach seam makes the strongest use of formed metal and presents a clean exterior with no exposed welds.

Progressive slide suspension provides smooth drawer operation.

Steel drawer interiors are pre‐painted cinder.

Letter and legal filing is accommodated with conventional or hanging folders.

Side‐to‐side legal or letter filing can be accommodated with file bars that ship standard in file.

Front‐to‐back filing can be accommodated by ordering the appropriate number of front‐to‐back file bars separately.

Locking Leveling floor glides Smooth steel finish group 1 – paint color to be selected.

HERMAN MILLER / Meridian Storage Cases

SC‐1 36”w x 18”d x 66”h (5 shelf) SC‐2 42”w x 18”d x 35”h (3 shelf)

Versatile metal storage cases with base, adjustable shelves, arc handles and lock.

Smooth steel finish – paint color to be selected.

12‐year, 3‐shift warrantee

WORKSTATIONS

KIMBALL/ Priority Exterior surfaces HPL.

Joints are securely fastened with dowels and mechanical fasteners to ensure maximum strength.

Drawer fronts are 3⁄4"‐thick, 3‐ply construction. Five‐sided drawer construction allows easy removal of drawer fronts.

Drawer sides and back are 1⁄2" thick and wrapped in natural woodgrain vinyl. Bottoms are 3⁄16" thick.

Drawer suspensions feature black slides with precision steel ball bearings to ensure long‐lasting, quiet, smooth operation. Box, file, and lateral file drawers feature full extension slides.

Black filing rods are standard in all file drawers to accommodate various filing requirements.

Face‐mounted locks. Lock cylinders are removable if rekeying is necessary. Key random and key specific options are available.

Fixed modesty panels are featured on all assembled case goods.

Provide hinged modesty where necessary for wall power access.

Hinged modesty panel swings inward to allow access to wall outlets.

Softened wood edge detail.

Finish: To be selected HPL.

WS‐1 Fixed Height Workstation with Left Return 30x72 Single B/B/F pedestal desk with breakfront modesty.

24x48 Return with F/F pedestal.

Left Return.

Finish: To be selected HPL

WS‐1A Fixed Height Workstation with Right Return 30x72 Single B/B/F pedestal desk with breakfront modesty.

24x48 Return with F/F pedestal.

Right Return.

Finish: To be selected HPL

WS‐2 Fixed Height Workstation 30x60 Left Ped 30x60 Single B/B/F pedestal desk with breakfront modesty.

Left Ped Finish: To be selected HPL

WS‐2A Fixed Height Workstation 30x60 Right Ped 30x60 Single B/B/F pedestal desk with breakfront modesty.

Right Ped Finish: To be selected HPL

WS‐2B Fixed Height Workstation 30x72 Left Ped 30x72 Single B/B/F pedestal desk with breakfront modesty.

Left Ped Finish: To be selected HPL

WS‐3 Fixed Height Workstation with Wall Mount Overhead Left Return 30x60 Single B/B/F pedestal desk with breakfront modesty.

24x48 Return with F/F pedestal.

16”x60” wide Overhead Wall Mount Storage Cabinet.

Left Return.

WS‐3D Fixed Height Workstation with Wall Mount Overhead Right Return 30x72 Single B/B/F pedestal desk with breakfront modesty.

24x48 Return with F/F pedestal.

16”x78” wide Overhead Wall Mount Storage Cabinet.

Right Return.

Finish: To be selected HPL

WS‐3E Fixed Height Workstation with Wall Mount Overhead Left Return 30x72 Single B/B/F pedestal desk with breakfront modesty.

24x48 Return with F/F pedestal.

16”x78” wide Overhead Wall Mount Storage Cabinet.

Left Return.

Finish: To be selected HPL

WS‐3F Fixed Height Workstation with Wall Mount Overhead Left Return 30x60 Single B/B/F pedestal desk with breakfront modesty.

24x48 Return with F/F pedestal.

16”x78” wide Overhead Wall Mount Storage Cabinet.

Left Return.

WAR‐3 Storage Wardrobe 18”w x 15.75”d x 67”h

Full length one door storage wardrobe with hanging bar, three adjustable/removable shelves and two fixed shelves, including bottom shelf, locking.

BC‐2 4‐Shelf Plam Bookcase

35 7⁄8"w x 15 3⁄16"d x 53”h 3⁄4"‐thick shelves

11 7⁄8" shelf openings when shelves are in center position Finished inset top Closed back Plam finish to be selected.

KIMBALL/ Narrate Office System

WP‐1 Wall Panel System See plan for panel layout

The Narrate System provides components to build workstations as shown on plans including frames, fabric panels, and wall supports, electrical and cable management/base wireway components and power poles and all necessary assembly connections.

Panels: 3 1/4” thick Frames include: Mid‐frame supports at the 2‐high position, glides, attachment hardware Base‐wireway frames are available in powered and non‐powered models and feature painted base‐wireway covers. Powered models include the power harness.

Mid‐frame supports are standard at the 2‐high position to provide support for worksurfaces.

Vertical frame: 16 gauge cold‐rolled steel, black Horizontal frame: 14 gauge cold rolled steel, black Connections: Frames are attached with bolts that provide consistent alignment from frame‐to‐frame as well as strength and rigidity to the panel run.

Wireway Covers: Steel painted Acoustical Ratings: NRC rating = .65 STC rating = 15

Power options include: 10‐wire shared neutral: 6 hot, 2 neutral, 2 ground and 10‐wire independent neutral: 4 hot (2 and 2), 4 neutral, 2 ground Note: Independent and shared neutral components cannot be mixed. (TBD) All electrical components are nondirectional.

The building’s power capability should be determined before power is configured and components are specified.

Base wireway power harnesses and jumpers distribute power through the base.

Base wireway power entry allows power to enter at the floor, wall, or column. Power can then be distributed to the base and/or jumped up to a technology or power/data.

CASEGOODS

KIMBALL / Wood Veneer PRIORITY Collection OFF‐1 and OFF‐2

(Images similar but not exact)

Exterior surfaces wood veneer.

Joints are securely fastened with dowels and mechanical fasteners to ensure maximum strength.

Drawer fronts are 3⁄4"‐thick, 3‐ply construction. Five‐sided drawer construction allows easy removal of drawer fronts.

Drawer sides and back are 1⁄2" thick and wrapped in natural woodgrain vinyl. Bottoms are 3⁄16" thick.

Drawer suspensions feature black slides with precision steel ball bearings to ensure long‐lasting, quiet, smooth operation. Box, file, and lateral file drawers feature full extension slides.

Black filing rods are standard in all file drawers to accommodate various filing requirements.

Face‐mounted locks. Lock cylinders are removable if rekeying is necessary. Key random and key specific options are available.

Fixed modesty panels are featured on all assembled case goods.

Provide hinged modesty where necessary for wall power access.

Hinged modesty panel swings inward to allow access to wall outlets.

Softened wood edge detail

OFF‐1 Wood Workstation Components Right Return

[A] Right Pedestal Desk 72”w x 36”d x 29”h Box/box/file letter‐with locking pedestal

Breakfront half modesty panel

[B] Bridge Return 48”w x 21”d x 29”h (open in back or with hinged modesty panel)

[C] Lateral File Credenza 72”w x 24”d x 29”h 30” File/file lateral file pedestal with lock

[D] High Back Overhead Organizer 72”w x 15.75”d x 19”h 4‐door with full‐height recessed back panel, finished inset top, center divider, LED task lighting, attachment brackets and rail and 19” high tack boards below.

OFF‐2 Wood Workstation Components Left Return

[A] Left Pedestal Desk 72”w x 36”d x 29”h Box/box/file letter‐with locking pedestal

Breakfront half modesty panel

[B] Bridge Return 48”w x 21”d x 29”h (open in back or with hinged modesty panel)

[C] Lateral File Credenza 72”w x 24”d x 29”h 30” File/file lateral file pedestal with lock

[D] High Back Overhead Organizer 72”w x 15.75”d x 19”h 4‐door with full‐height recessed back panel, finished inset top, center divider, LED task lighting, attachment brackets and rail and 19” high tack boards below.

WAR‐1 Wood Storage Wardrobe‐Large 36”w x 24”d x 67”h

Full length two door storage wardrobe with hanging bar, three adjustable/removable shelves and two fixed shelves, including bottom shelf, locking.

Finish: To be selected wood veneer

WAR‐2 Wood Storage Wardrobe‐Small 18”w x 24”d x 67”h

Full length one door storage wardrobe with hanging bar, three adjustable/removable shelves.

Finish: To be selected wood veneer

BC‐1 4‐Shelf Wood Bookcase

35 7⁄8"w x 15 3⁄16"d x 53”h 3⁄4"‐thick wood shelves

11 7⁄8" shelf openings when shelves are in center position Finished inset top Closed back Finish to be selected.

ACCESSORIES

USA BUILING SUPPLIES / Mail Console

CON 28‐36"h x 62 3/8"w x 30"d CTA3062‐TBSSD

Tabletop is stain and scratch resistant.

Bases are constructed from heavy gauge steel with a powder coat finish.

Work surface is 1.125" industrial grade 45‐50 pound substrate with thermally fused laminate with 3 mm PVC edging.

Legs are 1/4" square steel tubing with powder coat finish.

Table height is adjustable in 1" increments from 28" to 36".

Sliding door height is 18 1/2"h.

USA BUILING SUPPLIES / 30 Slot Mail Shelf

MAIL 26 1/2"h x 62 3/8"w x 12 1/4"d DM‐SR2605

Exterior shell and vertical dividers are constructed of 3/4" 45‐50 lb.

substrate (particle board) for tabletop mail sorters with thermally fused finish and matching complimentary 3/8" PVC on exposed edges.

Adjustable steel shelves have a 90‐degree 1/2" lip label area with center cut out.

Closed back.

Provide shelf label holders.

JONTI‐CRAFT / Mobile Technology Stand

MTS 24”w x 25.5” D x 39”h

Birch veneer.

Lockable storage cabinet.

Adjustable shelf with cord management.

Pull‐out keyboard tray with swing arm for mouse.

Heavy‐duty locking casters.

RUBBER TRASH CANS WITH LID

TR‐1 22” dia. x 28"h, 32 Gallon

Heavy‐duty plastic construction.

Molded‐in handles.

Vented side channels.

USDA compliant, NSF certified.

Provide Lid.

RUBBERMAID OFFICE TRASH CANS

TR‐2 14”l x 10"w x 15"h, 7 Gallon

Space‐efficient trash can fit under desk.

Lightweight plastic, gray.

Rolled rim.

PRODUCT SUMMARY AND PROBABLE COST Section 2

Bill of Materials-B262 (Sheet 1 of 3)

PRODUCT INFORMATION LOCATION

Description Part Number Unit Price Total Total QTY Log Plans Office Log. Squadron Log. Squadron CMDR Chief of Supply Logistics Div Chief First Sergeant Office 101 101A 102 102A 102B 102C 102D 102E

Bookcase-Wood BC-1 $ - 3 1 1 1 Bookcase-HPL BC-2 $ - 2 1 1 Chair-Desk CH-4 $ - 11 4 2 1 1 1 1 1 Chair-Lounge CH-5 $ - 2 2 Chair-Side CH-6 $ - 9 2 2 2 2 1 Office Case goods OFF-1 $ - 2 1 1 Office Case goods OFF-2 $ - 2 1 1 Sofa L-1 $ - 1 1 Table-Accent T-1 $ - 1 1 Table-Coffee T-3 $ - 1 1 Trash Can-small TR-2 $ - 9 2 1 1 1 1 1 1 1 Wardrobe WAR-1 $ - 1 1 Wardrobe WAR-2 $ - 2 1 1 Wardrobe WAR-3 $ - 1 1 Work Station WS-1 $ - 1 1 Work Station WS-1A $ - 5 3 2 Work Station WS-3D $ - 1 1 Work Station WS-3E $ - 1 1

Materials Subtotal: $ -

INSERT % $ -

Grand Total (matches CLIN0001): $ - Contractor Fill in

Bill of Materials-B262 (Sheet 2 of 3)

PRODUCT INFORMATION LOCATION

Description Part Number Unit Price Total Total QTY Mail Distr. Log. Control Stock Control Policy Proc. NCOIC Policy Proc. OIC System Ops Conference Computer Base Break Rm 103 104 104A 104B 104C 105 110 110A 111

Bookcase-HPL BC-2 $ - 2 1 1 Chair-Conference CH-3 $ - 16 16 Chair-Desk CH-4 $ - 9 2 1 1 4 1 Chair-Stacking CH-7 $ - 12 12 Console CON $ - 1 1 Credenza-Large CR-1 $ - 2 1 1 Credenza-Small CR-2 $ - 1 1 File Cabinet-4 drawer FC-1 $ - 3 1 1 1 File Cabinet-2 drawer FC-2 $ - 2 2 Mail MAIL $ - 1 1 Mobile Technology Stand MTS $ - 1 1 Storage Cabinet-High SC-1 $ - 5 2 2 1 Storage Cabinet-Low SC-2 $ - 1 1 Table-Break Room T-2 $ - 3 3 Table-Conference T-5 $ - 1 1 Table-Flip Top T-8 $ - 1 1 Table-Flip Top T-9 $ - 1 1 Trash Can-large TR-1 $ - 1 1 Trash Can-small TR-2 $ - 8 2 1 1 2 1 1 Wall Panel System WP-1 $ - 1 1 Wardrobe WAR-3 $ - 1 1 Work Station WS-1 $ - 3 1 1 1 Work Station WS-1A $ - 2 1 1 Work Station WS-2B $ - 1 1 Work Station WS-3F $ - 3 3

Materials Subtotal: $ -

INSERT % $ -

Grand Total (matches CLIN0001): $ - Contractor Fill in

Bill of Materials-B262 (Sheet 3 of 3)

PRODUCT INFORMATION

Description Part Number Unit Price Total Total QTY Training Cust. Serv Research Weapon Support Weapon Flight TMO Office Office 113 114 116 117 117A 125 125A 125B

Bookcase-HPL BC-2 $ - 2 1 1 Chair-Conference CH-3 $ - 13 8 5 Chair-Desk CH-4 $ - 15 2 2 6 1 1 1 1 1 File Cabinet-4 drawer FC-1 $ - 1 1 Storage Cabinet-High SC-1 $ - 2 2 Table-Conference T-6 $ - 1 1 Table-Conference T-7 $ - 1 1 Trash Can-small TR-2 $ - 9 1 1 3 1 1 1 1 Work Station WS-1 $ - 4 2 1 1 Work Station WS-1A $ - 1 1 Work Station WS-2 $ - 3 3 Work Station WS-2A $ - 1 1 Work Station WS-2B $ - 5 1 2 1 1 Work Station WS-3D $ - 1 1

Materials Subtotal: $ -

INSERT % $ -

Grand Total (matches CLIN0001): $ - Contractor Fill in Total Sheet 1 $ - Total Sheet 2 $ - Total Sheet 3 $ - Total Building 262 (matches CLIN0001) $ -

FLOOR PLANS / DRAWINGS Section 3