B09025 Electrical and Electronic Spare Parts Final.pdf

LEGAL NOTICE

AND

INVITATION TO BID

BID #090-25

Sealed/Electronic bids will be accepted by the PUBLIC UTILITIES BOARD of the City of Brownsville, Texas ("BPUB"), for the Electrical and Electronic Spare Parts until 5:00 PM, September 24, 2025 at the BPUB Purchasing Office; 1155 FM 511, Olmito, Texas 78575.

Electronic and/or sealed bids received after this time will not be considered.

Bids will be publicly opened and read aloud on September 25, 2025 at 10:00 AM. Vendors may call in at 10:00 AM, September 25, 2025 to (956) 214-6020 to listen to the bid opening.

Brownsville Public Utilities Board utilizes the Texas Purchasing Group to post Request for Proposal (RFP) and bid opportunities. Registration is available by following the link:

registering on Bidnet Direct's Texas Purchasing Group, if you haven’t already registered.

Detailed specifications may also be obtained at the Brownsville Public Utilities Board website at https://www.brownsville-pub.com/rfp_status/open/

Please mark on the outside of the envelope and on any carrier’s envelopes: "SEALED

BIDS FOR “B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS,

SEPTEMBER 24, 2025, 5:00 PM”. This envelope shall be addressed to Diane Solitaire;

Brownsville Public Utilities Board; Purchasing Department; 1155 FM 511; Olmito, Texas 78575.

The BPUB will not be responsible in the event that the U.S. Postal Service or any other courier system fails to deliver the sealed bids to the Brownsville Public Utilities Board, Purchasing Office by the given deadline above. Bids will also be accepted via electronic submission.

The BPUB specifically reserves the right to reject any or all bids, to waive irregularities or informalities in any or all bids and to accept any bid which is deemed to be in the best interest of the Board.

By:

Diane Solitaire Purchasing Department

(956) 983-6366 https://www.bidnetdirect.com/texas/brownsville-pub https://www.bidnetdirect.com/texas/brownsville-pub https://www.brownsville-pub.com/rfp_status/open/

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 2

Please submit this page upon receipt.

ACKNOWLEDGEMENT FORM

B090-25 Electrical and Electronic Spare Parts

For any clarifications, please contact Nicole Espinoza at the Brownsville Public Utilities Board, Purchasing Department at (956) 983-6353 or via e-mail: nespinoza@brownsville-pub.com

Please e-mail this page upon receipt of the bid legal notice. If you only received the legal notice and you want the bid package mailed, please provide a method of shipment with account number in the space designated below.

Check one:

( ) Yes, I will be able to send a bid; obtained bid package from website.

( ) Yes, I will be able to send a bid; please email the bid package.

Email:

( ) No, I will not be able to send a bid for the following reason:

If you are unable to send your bid, kindly indicate your reason for “No bid” above and return this form via email to: nespinoza@brownsville-pub.com. This will ensure you remain active on our vendor list.

Date

BPUB does offer the annual supply list in excel format. Vendors must mark and submit the acknowledgment form in order to receive the annual supply list in excel format.

Requesting Cost Sheet in Excel format.

Company:

Name:

Address:

City: State: Zip Code:

Phone: Fax:

E-mail: _________________________________________________________________ mailto:nespinoza@brownsville-pub.com mailto:nespinoza@brownsville-pub.com

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 3

Special Instructions

Contract Information

• Interpretation

Questions concerning terms, conditions and technical specifications should be directed to:

Nicole Espinoza or Diane Solitaire, Purchasing Department Purchasing & Materials Manager

(956) 983-6353 (956) 983-6366

• Tentative Time line

1. September 8, 2025 to September 24, 2025 - Vendors work on formal bid.

2. September 24, 2025 before 5:00 PM - Vendor must submit two (2) sets of bid documents to:

Diane Solitaire, Purchasing

1155 FM 511

Olmito, Texas 78575

B#090-25 Electrical and Electronic Spare Parts Due: September 24, 2025 at 5:00 PM

The above noted information must be included on formal bid and on any carrier’s envelope/package. The Brownsville Public Utilities Board will not be held responsible for missing, lost or late mail. Brownsville Public Utilities Board will also accept electronic submissions.

3. September 15, 2025 - Last Day to Submit questions

4. September 25, 2025 - Open bids at 10:00 AM

5. September 25, 2025 – October 15, 2025 - Evaluate bids

6. October 27, 2025 - Provide Final Recommendations

7. November 10, 2025 - Send to Utilities Board for approval

• Bidder shall submit one (1) electronic version of the cost sheet (excel format) on either USB stick or CD/DVD.

• Or Equal

Brand name or manufacturer’s reference used in this request is descriptive – not restrictive-it is intended to indicate type and quality desired. Brands of like nature and quality will be considered. If bidding on other than referenced specifications please provide complete descriptive information of said item. Items on cost sheet must be the exact brand and part number listed.

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 4

• Pricing

Bid unit price on quantity specified, extend and show total. In case of errors in extension, unit prices shall govern. Price shall remain firm for 12 months after receipt of purchase order.

All fields (UNIT PRICE, TOTAL PRICE, EST. DELIVERY IN DAYS, MANUFACTURER, & PART #) on the specification pages must be filled. The data must be complete to identify the bidding brand.

• Escalation/De-escalation

Bid prices shall remain firm for a period of six (6) months from the due date. At the end of the six (6) months or award date, bid prices shall be adjusted up or down accordingly to documented changes in the price of core steel, copper, aluminum, mild steel, stainless steel, oil, and labor. It is the responsibility of the awarded bidder(s) to fully document the changes and satisfy Brownsville PUB as to the amount of the change. Price shall remain firm after price adjustment, if applicable.

If the change in price is 1% or less (up or down), no changes shall be made in the bid price.

In the event an awarded bidder and Brownsville PUB cannot agree on the amount of the change, Brownsville PUB may elect to terminate the contract.

• Vendor Representative

The successful vendor agrees to send a personal representative with binding authority for the company to the Brownsville Public Utilities Board upon request to make adjustments and/or assist with coordination of all transactions as needed.

• Quality of Products

All items must be new, in first class condition, including containers suitable for shipment and storage. No substitutions in standard grades or lesser quality will be accepted.

• Determining Factors for Award

1. Bidders net price on bid items

2. Stock availability

3. Reputation of brand names offered

4. Reputation and location of the bidder

5. Time and conditions of delivery

6. BPUB financial and legal responsibility evaluations of any identified teaming arrangements involving significant joint ventures, subcontractors and suppliers

7. Safety record will be considered when determining the responsibility of the bidder

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 5

• Contract with Vendor/Entity Indebted to BPUB

It is a policy of the BPUB to refuse to enter into a contract or other transaction with an individual, sole proprietorship, joint venture, Limited Liability Company or other entity indebted to BPUB.

• Vendor ACH (Direct Deposit) Services

The BPUB has implemented a payment service for vendors by depositing the payment directly to the vendor’s bank account. Successful vendor(s) will be required to receive payments directly through Automated Clearing House (ACH) in lieu of a paper check. The awarded vendor must agree to receive payments via ACH (Direct Deposit).

• Tax Identification Number (TIN)

In accordance with IRS Publication 1220, a W9 form, or a W8 form in cases of a foreign vendor, will be required of all vendors doing business with the Brownsville PUB. If a W9 or W8 form is not made available to Brownsville PUB, the first payment will be subject to income tax withholding at a rate of 28% or 30% depending on the U.S. status and the source of income as per IRS Publication 1220. The W9 or W8 form must be included with bid response. Attached are sample forms.

• Taxes

The Brownsville Public Utilities Board is exempt from Federal Excise Tax, State Tax and Local taxes. Do not include tax in the bid. If it is determined that tax was included in the bid, it will not be included in the tabulation or any awards. Tax exemption certificates will be furnished upon request.

• Signing of Bid

Failure to sign bid will disqualify it. Person signing bid should show title or authority to bind their firm to a contract.

• EEOC guidelines

During the performance of this contract, the contractor agrees not to discriminate against any employee or applicant for employment because of race, national origin, age, religion, gender, marital or veteran status or physically challenging condition.

• As Needed Basis

Quantities shown are estimates only and are based on average usage. Items are to be ordered “as needed” and be billed as such. BPUB will not accept full order of items requested.

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 6

• Contract and Purchase Order

The parts shall be delivered FOB Brownsville Public Utilities Board, 1155 FM511, Olmito, TX 78575. A contract for the electrical and electronic spare parts will be placed into effect by means of a purchase order issued by Brownsville Public Utilities Board after tabulation and final approval by the BPUB Board of Directors.

• Delivery

Delivery of the material will only be accepted during normal working hours, Monday thru Friday, 8 AM to 4 PM. A delivery ticket must be furnished with each delivery by the carrier. The delivery ticket must show the BPUB's Purchase Order, number of crates, packages, etc. being delivered to BPUB. A packing list must be furnished with each delivery by the carrier. The packing list must include the BPUB's Purchase Order number, a brief description of materials and the total number of crates, size, etc. being delivered to

BPUB.

• Brownsville Public Utilities Board Rights

1. If only one or no bid is received by "submission date", the BPUB has the right to reject, re-bid, accept and/or extend the bid by up to an additional two (2) weeks from original submission date.

2. The right to reject any/or all bids and to make award as they may appear to be advantageous to the Brownsville Public Utilities Board.

3. The right to hold bid for 90 days from submission date without action, and to waive all formalities in bid.

4. The right to extend the total bid beyond the original 90-day period prior to an award, if agreed upon in writing by all parties (BPUB and vendor/contractor) and if bidder/vendor holds original bid prices firm.

5. The right to terminate for cause or convenience all or any part of the unfinished portion of the Project resulting from this solicitation within Thirty (30) calendar days written notice; for cause: upon default by the vendor/contractor, for delay or non-performance by the vendor/contractor; or if it is deemed in the best interest of the BPUB for BPUB’s convenience.

6. The right to increase or decrease quantities. In bid, stipulate whether an increase or decrease in quantities will affect bid price

7. The Brownsville PUB has the right to refuse to enter into a contract or other transaction with any individual or entity indebted to the municipality as per Local Government Code 252.0436.

• Corrections

Any interpretation, correction, or change to the invitation to bid will be made by ADDENDUM. Changes or corrections will be issued by the Brownsville PUB Purchasing Department. Addenda will be e-mail to all who have returned the Bid Acknowledgement Form. Addenda will be issued as expeditiously as possible. It is the responsibility of the vendors to determine whether all addenda have been received. It will be the responsibility of all respondents to contact the Brownsville PUB prior to submitting a

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 7

response to the invitation to bid to ascertain if any addenda have been issued, and to obtain any all addenda, execute them, and return addenda with the response to the invitation to bid.

Addenda may be posted on BPUB’s webpage.

COST SHEET B#090-25 Electrical and Electronic Spare Parts

Items on cost sheet must be the exact brand and part number listed

B070-24 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 8

COMMODITY DESCRIPTION U/M QTY UNIT

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER

LEAD TIME

1 L0001-00 STARTER, SIZE 00 NEMA 1 120VAC, SQUARE D

MODEL# 8536-SAG12-

V02S (TO INCLUDE TWO LUG NUT KITS# 140G-

M-TLA23) *MUST BE EXACT*

EA 10

2 L0002-00 STARTER, SIZE 0 NEMA 1 120VAC, SQUARE D

MODEL# 8536-SBG2-V02S (TO INCLUDE TWO

LUG NUT KITS# 140G-M-TLA23)

*MUST BE EXACT*

EA 10

3 L0003-00 STARTER, SIZE 1 NEMA 1 120VAC, SQUARE D

MODEL# 8536-SCG3-V02S (TO INCLUDE TWO

LUG NUT KITS# 140G-M-TLA23)

*MUST BE EXACT*

EA 50

4 L0004-00 STARTER, SIZE 2 NEMA1 120VAC, SQUARE D

MODEL# 8536-SDG1-V02S (TO INCLUDE TWO

LUG NUT KITS# 140G-M-TLA23) OPEN SIZE 2

#8536- SD01-VO2S, OPTION 8536-SDG1-V02S

*MUST BE EXACT*

EA 50

5 L0005-00 STARTER, SIZE 3 NEMA 1 120VAC, SQUARE D

MODEL# 8536-SEG1-V02S SQUARE D SIZE 3

8536-SE01-V02S; 8536SE01S

(TO INCLUDE TWO LUG NUT KITS #140G-M-

TLA23)

*MUST BE EXACT*

EA 20

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 9

ITEM COMMODITY DESCRIPTION U/M QTY UNIT

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

6 L0006-00 STARTER, SIZE 4 NEMA 1 120VAC, SQUARE D

MODEL# 8536-SFG1-V02S

*MUST BE EXACT*

EA 20

7 L0007-00 ROTOFLOAT, MERCURY FREE TYPE S 40 FEET

CORD, NORMALLY OPEN, SELF WEIGHTED,

MODEL# S40NO

EA 100

8 L0008-00 ROTOFLOAT, MERCURY FREE TYPE S 60 FEET

CORD, NORMALY OPEN, SELF WEIGHTED,

MODEL# S60NO

EA 100

9 L0009-00 ROTOFLOAT, MERCURY FREE TYPES 80 FEET

CORD, NORMALLY OPEN, SELF WEIGHTED,

MODEL# S80NO

EA 100

10 L0010-00 ROTOFLOAT, MERCURY FREE TYPE S 80 FEET

CORD, NORMALLY CLOSED, SELF WEIGHTED,

MODEL# S80NC

EA 40

11 L0011-00 RELAY, 3 PHASE MONITOR 8 PIN 480VAC, 1

CONTACT, TIME MARK MODEL# A258B

EA 60

12 L0012-00 RELAY, 3 PHASE MONITOR 8 PIN

240VAC, 1 CONTACT, TIME MARK MODEL# 257B

EA 60

13 L0013-00 RELAY, PHASE MONITOR 11 PIN 240VAC, 2

CONTACT, TIME MARK# 2522BM

EA 20

14 L0014-00 RELAY, 120VAC, TIME MARK MODEL# A471-24V EA 10

15 L0015-00 BREAKER, SINGLE POLE, ALLEN BRADLEY

MODEL# 1492-SPM1C200

SQUARE D MODEL #QOU120 20 AMP

EA 100

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 10

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

16 L0016-00 BREAKER, 3 POLE, 40 AMPS, SIEMENS MODEL#

CQD340, *MUST BE EXACT*

EA 60

17 L0017-00 BREAKER, 3 POLE, 60 AMPS, SIEMENS MODEL#

CQD360 *MUST BE EXACT*

EA 60

18 L0018-00 BREAKER, 3 POLE, 80 AMPS, SIEMENS #CQD380

*MUST BE EXACT*

EA 60

19 L0019-00 ENCLOSURE, FIBERGLASS 30X24X10, 3 POINT

LATCH AND LOCK NEMA 4X STAHLIN MODEL#

N30208FHLWT, HOFFMAN MODEL#

A30H2410GQRLP3PT

EA 10

20 L0020-00 ENCLOSURE, FIBERGLASS 36X30X12, 3 POINT

LATCH AND LOCK NEMA 4X HOFFMAN MODEL#

A36H3012GQRLP3PT

EA 10

21 L0021-00 ENCLOSURE, FIBERGLASS 24X24X8, 3 POINT

LATCH AND LOCK NEMA4X HOFFMAN MODEL#

A24H2408GQRLP3PT

EA 15

22 L0022-00 CIRCUIT BREAKER, 3 POLE 100A, SQUARE D

600VAC MODEL# FAL36100 ALLEN BRADLEY

600VAC MODEL# 140G-G2C3-D10

*PREFERS SIEMENS*

EA 4

23 L0023-00 TRANSFORMER CONTROL,

SQUARE D 9070T150D23 120/240 TO 24VAC, OR

ALLEN BRADLEY 1497B- A4-M13-0-N

EA 20

24 L0024-00 CIRCUIT BREAKER, 3 POLE 15A, SQUARE D

600VAC MODEL# HDL36015 ALLEN BRADLEY

MODEL# 140G-G2C3-C15 *PREFERS SQUARE D*

EA 6

25 L0025-00 CIRCUIT BREAKER, 3 POLE 70A, SQUARE D

600VAC MODEL# FAL34070 ALLEN BRADLEY

MODEL# 140G-G2C3-C70 *PREFERS SQUARE D*

EA 10

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 11

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

26 L0026-00 CIRCUIT BREAKER, 3 POLE 80A, SQUARE D

600VAC MODEL# HDL36080 ALLEN BRADLEY

MODEL# 140G-G2C3-C80

*PREFERS SQUARE D*

EA 6

27 L0027-00 DISTRIBUTION BLOCK, 3 POLES HEAVY DUTY

600VAC, ILSCO MODEL# PDB-11-2/0-3 ALLEN

BRADLEY MODEL# 1492-PD3141

EA 100

28 L0028-00 DISTRIBUTION BLOCK, 1 POLE HEAVY DUTY

600VAC, ILSCO MODEL# PDB-14-2/0-1 MODEL#

1492-100Y

EA 100

29 L0029-00 RELAY, 8 PIN SOCKET TYPE 10A 120VAC, SQUARE

D MODEL# 8501KPR12P14V20 ALLEN BRADLEY

MODEL# 700-HA32A14 TO INCLUDE LED

INDICATOR

EA 200

30 L0030-00 RELAY, 8 PIN SOCKET TYPE 10A 24VAC, SQUARE

D MODEL# 8501KPR12P14V14 MODEL# 700-

HA32A24

EA 200

31 L0031-00 RELAY, 8 PIN SOCKET TYPE 10A 12VDC, SQUARE

D MODEL# 8501KPDR12P14V51 ALLEN BRADLEY

MODEL# 700-HA32Z12

EA 40

32 L0032-00 RELAY, 8 PIN SOCKET TYPE 10A 24VDC, SQUARE

D MODEL# 8501KPDR12P14V53 ALLEN BRADLEY

MODEL# 700-HA32Z24

EA 40

33 L0033-00 CIRCUIT BREAKER, 3 POLE NEMA 1 800AMP

600VAC, CUTLER HAMMER MODEL#

HND3800T36W ALLEN BRADLEY MODEL# 140G-

M6F3-D80

EA 2

34 L0034-00 CONTROL PUMP, DUPLEX INTRINSICALLY INPUTS

120VAC, DIVERSIFIED ELECTRONICS MODEL#

ARM-120-AFE

EA 50

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 12

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

35 L0035-00 CONTROL PUMP, TRIPLEX INTRINSICALLY INPUTS

1420VAC, DIVERSIFIED ELECTRONICS

MODEL# ARM120ADE

EA 10

36 L0036-00 TRANSDUCER, 10 PSI LEVEL 100 FEET 4-20MA,

CONTEGRA PART# SLX130-M-10-100-T3-B

EA 10

37 L0037-00 TRANSDUCER, 15 PSI LEVEL 100 FEET 4-20MA,

CONTEGRA PART# SLX130-M-15-100-T3-B

EA 10

38 L0038-00 PIPE 2" X 10' RIDGID, GALVANIZED, METAL,

MODEL# GALV2 ALLIED TUBE & CONDUIT

MODEL# RIG200

FT 500

39 L0039-00 PIPE 3" X 10' RIDGID, GALVANIZED,

METAL, GALV3, ALLIED TUBE & CONDUIT

MODEL# RIG300

FT 200

40 L0040-00 UNI-STURT 7/8 SS 316 10' SECTION C, MODEL#

P1000TSS, ALLIED TUBE &

CONDUIT MODEL# STRUT7/8 SS SLOTTED 10

FT 500

41 L0041-00 UNI-STRUT 5/8 SS 316 10' SECTION C, ALLIED

TUBE & CONDUIT MODEL#

STRUT 1-5/8 SS SLOTTED 10

FT 500

42 L0043-00 PLC CONTROLLER PROGRMMABLE LOGIC

120VAC 1100 MICROLOGIC, ALLEN BRADLEY#

1763-L16DWD

EA 5

43 L0044-00 PLC CONTROLLER PROGRAMMABLE LOGIC

120VAC 1400 MICROLOGIC, ALLEN BRADLEY#

1766-L32BWA

EA 5

44 L0045-00 PLC CONTROLLER PROGRAMMABLE LOGIC

120VAC, 1400 MICROLOGIC, ALLEN BRADLEY

MODEL# 1766-L32AWA

EA 5

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 13

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

45 L0046-00 PLC CONTROLLER PROGRAMMABLE LOGIC

120VAC, 1100 MICROLOGIC, ALLEN BRADLEY

MODEL# 1763-L16AWA

EA 5

46 L0047-00 MODULE, DIGITAL INPUT 120VAC, ALLEN

BRADLEY MODEL# 1762-IA8

EA 5

47 L0048-00 MODULE, DIGITAL INPUT 120VAC, ALLEN

BRADLEY MODEL# 1762-OA8

EA 5

48 L0049-00 MODULE, EXPANSION ANALOG INPUT 4-20MA,

ALLEN BRADLEY MODEL# 1762-IF4

EA 5

49 L0050-00 MODULE, OUPUT 4-20MA, ALLEN BRADLEY

MODEL# 1762-OF4

EA 5

50 L0051-00 POWER SUPPLY, 24VDC 2-5A, DIN RAIL, ALLEN

BRADLEY MODEL#

1606-XLE120EN

EA 5

51 L0052-00 POWER SUPPLY, 12VDC 2-5A, DIN RAIL, ALLEN

BRADLEY# 1606- XLP50B

EA 5

52 L0053-00 RELAY, TIME DELAY 120VAC, TIME MARK

MODEL# 310-120V ALLEN BRADLEY MODEL#

700-HT OR AB 700-HR52TA17

EA 10

53 L0054-00 SURGE PROTECTOR 120VAC, SQUARE D MODEL#

D120VIP ALLEN BRADLEY MODEL# 4983-DS120-

EA 12

54 L0055-00 ALTERNATOR, TRIPLEXOR 120VAC, FLYGT

MODEL# 4403220 or MPE 009- 120-23P

EA 4

55 L0056-00 PHASE MONITOR 240V, FLYGT MODEL#

14403212 OR MPE 001-DVM-1212

EA 10

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 14

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

56 L0057-00 RELAY, 120VAC, INTRINSICALLY SAFE, FLYGT

MODEL# 14403222 OR MPE-030-120-118,

LITTELFUSE ISS- 101

EA 12

57 L0058-00 CIRCUIT BREAKER, 3 POLE 30A 600VAC, EATON

MODEL# EHD3030L, 140G-G2C3-C30

EA 6

58 L0059-00 CIRCUIT BREAKER, 3 POLE 50A 600VAC, SIEMENS

MODEL# ED63B050MX, 140G-G2C3-C50

EA 6

59 L0060-00 PROTECTION DEVICE 120VAC, EBARRA, MTS

MODEL# MOS-1PE

EA 10

60 L0062-00 CIRCUIT BREAKER, 3 POLE 60A, MOLDED CASE,

ALLEN BRADLEY MODEL# 140G-G2C3-C60 (TO

INCLUDE TWO LUG NUT KITS# 140G- G-TLC13

LUGS)

EA 4

61 L0063-00 CIRCUIT BREAKER, 3 POLE 40A 600VAC, MOLDED

CASE, ALLEN BRADLEY MODEL# 140G-G2C3-C40

(TO INCLUDE TWO LUG NUT KITS #

140G-G-TLC-13 LUGS)

EA 4

62 L0064-00 CIRCUIT BREAKER, 3 POLE 20A 600VAC, MOLDED

CASE, ALLEN BRADLEY MODEL# 140G-G2C3-

C20(TO INCLUDE TWO LUG NUT KITS# 140G-G-

TLC13 LUGS)

EA 4

63 L0065-00 VFD, 100HP 480VAC, ALTIVAR VFD

MODEL# ATV75HD75N4 OR ATV630D75N4

EA 2

64 L0066-00 SOFT, STARTER, 300HP 480VAC, BENSHAW SOFT

STARTER MODEL# RB2-1-S-361-16C

EA 2

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 15

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

65 L0067-00 SOFT, STARTER, 200HP 480VAC, BENSHAW SOFT

STARTER MODEL# RB3-1-S-240A-15C

EA 2

66 L0068-00 SOFT, STARTER, 100HP 480VAC, BENSHAW SOFT

STARTER MODEL# RB2-1-S-096A-13C BENSHAW

#RB3-1-S-125A-14C

EA 2

67 L0069-00 SOFT, STARTER, 160HP 480VAC, ALTIVAR SOFT

STARTER MODEL# ATS48C25Y

EA 2

68 L0070-00 REACTOR, 3 PHASE 60HP 480VAC- 600VAC 80

AMP MAX, FOR VFD, MTE CORP MODEL# RL

08002

EA 2

69 L0071-00 PROTECTION DEVICE, MINICAS 120, FLYGT

PUMP, MINICAS FLYGT MODEL #14-407129 OR

MPE-PMR2

EA 50

70 L0072-00 GLOVES, XL DISPOSABLE NITRILE 9MIL, HARDY

MODEL# 68512 NITRI-COR PLATINUM 8MIL

STYLE 4097

BX 100

71 L0073-00 HORN, 120V, FEDERAL SIGNAL #350WB120, HLA EA 60

72 L0074-00 LED, 120VAC, WITH PIPE MOUNT ATTACHMENT,

RED, EDWARDS SIGNALING MODEL#

105XBRMR120A,

EA 60

73 L0074-01 MOUNTING, BASE, EDW 105 PM PIPE MOUNT

ATTACHMENT, PART FOR USE WITH L0074-00

EA 60

74 L0075-00 RELAY, 11 PIN 120VAC 10A, SOCKET TYPE,

SQUARE D MODEL#8501KPR13P14V20 ALLEN

BRADLEY MODEL# 700-HA33A1

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 16

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

75 L0076-00 RELAY, 11 PIN 24VAC 10A, SOCKET TYPE,

SQUARE D MODEL# 8501KPR13P14V14 ALLEN

BRADLEY MODEL# 700HA33A24

EA 100

76 L0077-00 RELAY, 11 PIN 24VDC 10A, SQUARE D MODEL#

8501KPDR13V53 ALLEN BRADLEY MODEL# 700-

HA33Z24

EA 20

77 L0078-00 RELAY, 8 PIN 600VAC, SOCKET BASE, DIN RAIL,

FINDER MODEL# 8501NR52 ALLEN BRADLEY

MODEL# 700-HN100

EA 200

78 L0079-00 RELAY, 11 PIN 600VAC, SOCKET BASE DIN RAIL

MOUNT, FINDER MODEL# 8501NR61 ALLEN

BRADLEY

MODEL# 700-HN101 OR FINDER 90.21

EA 200

79 L0080-00 LED, 120V-130V, RED, PHILIPS LED MODEL#

ES60A19DL4PK FOR HIGH LEVEL ALARM LIGHT

BULB

EA 50

80 L0081-00 NUT 1/4" SPRING, STAINLESS STEEL

316, ALLIED TUBE & CONDUIT MODEL# PSRS-

1/4-SS

EA 200

81 L0082-00 NUT 3/8" SPRING, STAINLESS STEEL 316, ALLIED

TUBE & CONDUIT MODEL# PSRS-3/8-SS

EA 200

82 L0083-00 NUT 5/16" SPRING, STAINLESS STEEL 316, ALLIED

TUBE & CONDUIT MODEL# PSRS-5/16-SS

EA 200

83 L0084-00 NUT 1/2" SPRING, STAINLESS STEEL 316, ALLIED

TUBE & CONDUIT

MODEL# PSRS-1/2-SS

EA 200

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 17

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

84 L0085-00 CLAMP, 1 1/2" STAINLESS STEEL 316, ALLIED

TUBE & CONDUIT MODEL# PS1100-1-1/2-SS

EA 200

85 L0086-00 CLAMP, 2" STAINLESS STEEL 316, ALLIED TUBE &

CONDUIT MODEL# PS1100-2-SS

EA 200

86 L0087-00 CLAMP, 2 1/2" STAINLESS STEEL 316, ALLIED

TUBE & CONDUIT MODEL# PS1100-2-1/2-SS

EA 200

87 L0088-00 CLAMP, 3" STAINLESS STEEL 316, ALLIED TUBE &

CONDUIT MODEL# PS1100-3-SS OR CALBRITE

S63000SC00

EA 100

88 L0089-00 FUSE, 100AMP 600VAC NEMA 4X STAINLESS

STEEL, DISCONNECT HEAVY DUTY, PART#

H363SS EATON PART# DH363FWK

EA 4

89 L0090-00 FUSE, 200AMP 600VAC NEMA 4X STAINLESS

STEEL, DISCONNECT HEAVY DUTY, PART#

H364SS EATON PART# DH364FWK

EA 4

90 L0091-00 FUSE, 400AMP 600VAC NEMA 4X STAINLESS

STEEL, DISCONNECT HEAVY DUTY, PART#

H365SS EATON MODEL# DH365FWK

EA 4

91 L0092-00 FUSE, 600AMP 600VAC NEMA 4X STAINLESS

STEEL, DISCONNECT HEAVY DUTY, PART#

H366SS EATON MODEL# DH366FWK

EA 2

92 L0093-00 FUSE, 100AMP, LITTEL FUSE MODEL# FLRS100 EA 30

93 L0094-00 FUSE, 200AMP, LITTEL FUSE MODEL# FLSR200 EA 20

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 18

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

94 L0095-00 FUSE, 400AMP, LITTEL FUSE MODEL# FLSR400 EA 12

95 L0096-00 FUSE, 600AMP, LITTEL FUSE MODEL# FLSR600 EA 12

96 L0097-00 CONNECTOR # 4,2 PORT 600VAC,

INSULATED, ILSCO MODEL#TA250 PBTS-2-4

EA 50

97 L0098-00 CONNECTOR # 2/0-3/0, 2 PORT 600VAC,

INSULATED, ILSCO MODEL#TA250 PBTS-2-1/0

EA 50

98 L0099-00 CONNECTOR 1/0# 250kcm, 4 PORT

600VAC, INSULATED, ILSCO MODEL# TA250

PBTS-4-250

EA 50

99 L0100-00 CONNECTOR #10 1/0, 3 PORT 600VAC,

INSULATED, ILSCO MODEL#TA250 PBTS-3-1/0

EA 50

100 L0101-00 TAPE, 3/4" X 30' 600VAC 3M, INSULATION,

SCOTT MODEL# 130C

101 L0102-00 TAPE, 1" X 30' 600VAC 3M, INSULATION, SCOTT

MODEL# 130C

EA 50

102 L0103-00 TAPE, 1 1/2" X 30' 600VAC 3M, INSULATION,

SCOTT MODEL# 130C

EA 50

103 L0104-00 TAPE, 2" X 30' 600VAC 3M, INSULATION, SCOTT

MODEL# 130C

EA 50

104 L0105-00 TAPE, 3/4" X 60' 600VAC 3M, CAMBRIC, SCOTT

MODEL# 2520

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 19

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

105 L0107-00 SWITCH, 120V 300VAC, HOA N.O N.C. POS

SIEMENS MODEL# 52PT6G2A ALLEN BRADLEY

MODEL# 800T-J2A, SQUARE D MODEL

106 L0108-00 LED, RED 120V 300VAC 30.5MM, PILOT LIGHT,

ALLEN BRADLEY MODEL# 800T-QH2R SIEMENS

MODEL# 52PL4G2P, SQUARE D MODEL

9001KP35LRR31 RED PILOT

EA 100

107 L0109-00 LED, GREEN 120 12-120V 30.5MM, PILOT LIGHT,

ALLEN BRADLEY MODEL# 800T-QH2G, SQUARE D

MODEL SQD 9001KP35LGG31 GREEN

PILOT

EA 100

108 L0110-00 LED, YELLOW 120V 12-120V 30.5MM, PILOT

LIGHT, ALLEN BRADLEY MODEL# 800T-QH2Y

109 L0111-00 LED, BLUE 120V 12-120V 30.5MM, PILOT LIGHT,

ALLEN BRADLEY MODEL# 800T-QH2B

110 L0112-00 LED, AMBER 120V 12-120V 30.5MM, PILOT

LIGHT, ALLEN BRADLEY MODEL# 800T-QH2A

EA 50

111 L0113-00 PUSH BUTTON, RESET 120V 300VAC,

N.O. AND N.C., SIEMENS MODEL# 52PA8B2JP

ALLEN BRADLEY MODEL# 800T-A2A, SQUARE D

MODEL D# SQD 9001KR1BH13 PB & CONTACT BL

EA 60

112 L0114-00 PUSH BUTTON, RED 300VAC, AND LABEL,

SIEMENS MODEL# 52PA8A3KP

ALLEN BRADLEY MODEL# 800T-FX6A1

EA 30

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 20

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

113 L0115-00 LABEL, EMERGENCY PUSH BUTTON, ALLEN

BRADLEY MODEL# 800T- X504

EA 30

114 L0116-00 CABLE, COPPER #8 THHN 600VAC BLACK,

SOUTHWIRE MODEL# THHN8BLK

FT 2,000

115 L0117-00 CABLE, COPPER #8 THHN 600VACGREEN,

SOUTHWIRE MODEL# THHN8GRN

FT 2,000

116 L0118-00 CABLE, COPPER #3/0 THHN 600VAC BLK,

SOUTHWIRE MODEL# THHN3/0BLK

FT 1,000

117 L0119-00 CABLE, COPPER #4/0 THHN 600VAC

BLK, SOUTHWIRE MODEL# THHN4/0BLK

FT 1,000

118 L0120-00 CHARGER, BATTERY 6AMP 12VDC, MARINCO

MODEL# CHARGE PRO 28106

EA 3

119 L0121-00 LED, SECURITY LIGHT GALVANIZED 4000WATTS,

LUMENS- 400, HONEYWELL MODEL#MA0201-

17CR

EA 30

120 L0122-00 FUSEHOLDER, 600VAC, THREE FUSES DIN RAIL

MOUNT LITTLE FUSE MODEL# L60030C3PQDINR

EA 50

121 L0123-00 HEATER ELEMENT, FOR SQUARE D STARTERS

600VAC, OVERLOADS, SQUARE D MODEL# B25

EA 60

122 L0123-01 SQUARE D 9070T150D23 240/480TO 24VAC OR

ALLEN BRADLEY 1497B- A4-M16-0-N

EA 20

123 L0123-02 SQUARE D 9070T150D23 240/480TO 120VAC OR

ALLEN BRADLEY 1497B- A4-M14-0-N

EA 20

124 L0123-03 CONTROL, TRANSFORMER, 120/240 24VAC

SQUARE D #9070T150D23 OR ALLEN BRADLEY #

1497B-A4-M13-0-N

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 21

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

125 L0124-00 HEATER ELEMENT, FOR SQUARE D STARTERS

600VAC, OVERLOADS,

SQUARE D MODEL# B32

EA 60

126 L0125-00 HEATER ELEMENT, FOR SQUARE D STARTERS

600VAC, OVERLOADS, SQUARE D MODEL# B36

EA 60

127 L0126-00 HEATER ELEMENT, FOR SQUARE D STARTERS

600VAC, OVERLOADS, SQUARE D MODEL# B45

EA 60

128 L0127-00 HEATER ELEMENT, FOR SQUARE D STARTERS

600VAC, OVERLOADS, SQUARE D MODEL# B79

EA 60

129 L0128-00 HEATER ELEMENT, FOR SQUARE D STARTERS

600VAC, OVERLOADS, SQUARE D MODEL#

CC112

EA 60

130 L0129-00 HEATER ELEMENT, FOR SQUARE D STARTERS

600VAC, OVERLOADS,

SQUARE D MODEL# CC156

EA 60

131 L0130-00 HEATER ELEMENT, FOR SQUARE D STARTERS

600VAC, OVERLOADS, SQUARE D MODEL#

CC103

EA 60

132 L0131-00 HEATER ELEMENT, FOR SQUARE D STARTERS

600VAC, OVERLOADS, SQUARE D MODEL#

CC208

EA 60

133 L0132-00 POWER SUPPLY, 24VAC 120VAC,

TELEMECANIQUE MODEL# ABL8RPS24030 OR

AB1606XLP72E

EA 5

134 L0132-01 DC POWER SUPPLY P/N: ALLEN BRADLEY 1769-

PA2

EA 5

135 L0133-00 REACTOR, 3 PHASE 600VAC, MTE MODEL# RL-

08002 (*DUPLICATE OF L0070-00*)

EA 3

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 22

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

136 L0134-00 ARRESTOR, SECONDARY SURGE 600VAC,

SQUARE D MODEL# SDSA3650

EA 5

137 L0135-00 END CAPS, PLASTIC WHITE, FOR UNISTRUT

CHANNEL 1 5/8" X 1 5/8” PART# PS 61532 WHT

EA 500

138 L0136-00 END CAPS, PLASTIC WHITE, FOR UNISTRUT

CHANNEL 1 5/8" X 7/8 PART# PS 61532 WHT

EA 500

139 L0137-00 DUCT, PVC 1" X 2" X 6' PANDUIT SLOTTED ADH,

LIGHT GREY, PART# G1X2LG6-A

FT 504

140 L0138-00 COVER, PANDUIT DUCT PVC 1"W X 6’, LIGHT

GREY, PART# C1LG6

FT 504

141 L0141-00 ADAPTER, UBIQUITY POE 50V P/N# POE 50-60W EA 2

142 L0144-00 BALLAST, UNIVERSAL 120/277 PHILLIPS# ICN-

2P32-N

EA 2

143 L0146-00 BALLAST, UNIVERSAL 120/277 PHILLIPS ICN -

4P32-N

EA 2

144 L0148-00 BALLAST, T8 PART# SOP 2P59N35I EA 2

145 L0151-00 CONNECTOR, INSULATED 1/0 4 PORT ILSO

MODEL# PBTS-4 1/0

EA 20

146 L0153-00 CONNECTOR, INSULATED 250 KCM 2 PORTILSO#

PBTS-2-250

EA 20

147 L0155-00 LIGHT, FLUORESCENT 32W SYLVANIA# F032-850-

ECO

EA 6

148 L0155-01 LIGHT, FLUORESCENT BULB P/N F096841XPECO EA 6

149 L0159-00 MODULE, 4 CHANNEL ANALOG INPUT #1769-IF4 EA 4

150 L0160-00 MODULE, 8 CHANNEL ANALOG INPUT P/N 1769-

IF 8

EA 4

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 23

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

151 L0161-00 MODULE, IN/OUT P/N 1769-IQ6XOW4 EA 4

152 L0164-00 NANOSTATIOIN, UBIQUITY MS P/N NSM5US EA 4

153 L0167-00 PLC, COMPACT LOGIC P/N 1769-L32E BOX 4

154 L0170-00 VFD, LENZE A/C TECH MODEL# ESU 75 N 04TXB EA 2

155 L0172-00 TAPE, 3/4" SCOTCH SUPER 33 +GREEN; HIGH

VOLTAGE TAPE 3M 7000006098

EA 5

156 L0173-00 SCOTCH SUPER 33 + WHITE; HIGH VOLTAGE

TAPE 3M 7000006097

EA 5

157 L0174-00 TAPE, 3/4" SCOTCH SUPER 33 + RED; HIGH

VOLTAGE TAPE 3M 7000006094

158 L0175-00 TAPE, 3/4" SCOTCH SUPER 33 + BLUE; HIGH

VOLTAGE TAPE 3M

159 L0176-00 TAPE, 3/4" SCOTCH SUPER 33 + YELLOW; HIGH

VOLTAGE TAPE 3M 7000006096

160 L0177-00 TAPE, 3/4" SCOTCH SUPER 33 + ORANGE; HIGH

VOLTAGE TAPE 3M 7000031581

EA 50

161 L0178-00 TAPE, 3/4" SCOTCH SUPER 33 + BROWN; HIGH

VOLTAGE TAPE 3M 7000031580

EA 50

162 L0179-00 TAPE, 3/4" SCOTCH SUPER 33 + GRAY; HIGH

VOLTAGE TAPE 3M

7000006099

EA 50

163 L0180-00 TRUMETER, TIME LAPSED 24VAC 50/60HZ

EMM QUARTZ CHICAGO, MODEL# T50A4

EA 80

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 24

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

164 L0180-01 TRUMETER, 90-264VAC 50/60HZ ROHS MODEL

#722-0004

EA 80

165 L0181-00 TRANSFORMER, STEP DOWN, 100 KVA, 120V

PRI/24VAC SEC,

GENERAL ELECTRIC MODEL #9T58K2875

EA 20

166 L0181-01 TRANSFORMER, STEP DOWN, 100 KVA 240-

480V PRI/24VAC SEC, GENERAL ELECTRIC MODEL

#9T58K3027

EA 20

167 L0181-02 TRANSFORMER, STEP DOWN 100KVA 240-480V

PRI/120VAC SEC, GENERAL ELECTRIC MODEL

#9T58K2804

EA 20

168 L0181-03 TRANSFORMER, WALL STEP DOWN, 5KVA, 240V,

AC/480VAC, 120V AC/240VAC, COOPER 60HZ,

NEMA 3R, SINGLE, GRAY, ACME ELECTRIC

MODEL# T253014S

EA 15

169 L0182-00 STARTER, MOTOR SIZE 0 24VAC CONTROL COIL,

SQUARE D MODEL# 8536SB02V01S

EA 4

170 L0182-01 STARTER, MOTOR SIZE 1 24VAC CONTROL COIL,

SQUARE D MODEL# 8536SCO3V01S

EA 12

171 L0182-02 STARTER, MOTOR SIZE 2 24VAC CONTROL COIL,

SQUARE D MODEL# 8536SDO1V01S

EA 12

172 L0182-03 STARTER, MOTOR SIZE 3 24VAC CONTROL COIL,

SQUARE D MODEL# 8536SEO1V01S

EA 6

173 L0183-00 LIGHT, PILOT 24VAC LED RED POWER MODEL#

CSW30SD1E26

EA 60

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 25

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

174 L0183-01 LIGHT, PILOT 24VAC LED BLUE POWER MODEL#

CSW30SD4E26

EA 10

175 L0183-02 LIGHT, PILOT 24VAC LED YELLOW POWER

MODEL# CSW30SD3E26

EA 20

176 L0183-03 LIGHT, PILOT 24VAC LED WHITE POWER

MODEL# CSW30SD0E26

EA 20

177 L0184-00 RELAYS, CONTROL COIL 24VAC 8 PINS POWER

MODEL# R15-2012-23- 5024-WTL, AB-

700HA32A244, OR 750XBXRC24A-750

EA 100

178 L0184-01 RELAYS, CONTROL COIL 24VAC 11 PINS POWER

MODEL# R15-2013-23- 5024-WTL, AB-

700HA33A244, OR 750XCXRC24A-750

EA 100

179 L0184-02 RELAYS, CONTROL COIL 24VDC 8 PINS POWER

MODEL# R15-2012-23- 1024-WTL, AB-

700HA32Z244, OR 750XBXRC24D-750

EA 100

180 L0184-03 RELAYS, CONTROL COIL 24VAC 11 PINS POWER

MODEL# R15-2013-23- 1024-WTL, AB-

700HA33Z244 OR 750XBXRC24D-750

181 L0185-00 MODULE, CONTACT NORMALLY CLOSE CONTACT

SQUARE D 9998S01

EA 30

182 L0186-00 MODULE, CONTACT NORMALLY OPEN

INTERLOCK SIZE 0-7 SQUARE D 9999SX6

EA 30

183 L0187-00 TIMER, PLUG IN, ON DELAY 8 PINS 24VAC, 0.6-60

SEC SQUARE D 9050JCK13V14

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 26

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

184 L0187-01 TIMER, PLUG IN, ON DELAY 8 PINS 120VAC, 0.6-

60 SEC SQUARE D 9050JCK13V20

EA 20

185 L0187-02 TIMER, PLUG IN, ON DELAY 8 PINS 24VAC,0.1-10

MIN SQUARE D 9050JCK16V14

EA 20

186 L0187-03 TIMER, PLUG IN, ON DELAY 8 PINS 120VAC, 0.1-

10 MIN SQUARE D 9050JCK16V20

EA 20

187 L0188-00 PB1011-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE, EDISON BURNDY BUCHANNA

188 L0188-01 PB1012-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE

189 L0188-02 PB1013-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE, 1492100X

190 L0188-03 PB1041-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE

EA 50

191 L0188-04 PB1042-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE

EA 50

192 L0188-05 PB1043-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE,1492PD3141

EA 50

193 L0188-06 PB1061-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE

EA 50

194 L0188-07 PB1062-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 27

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

195 L0188-08 PB1063-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE

EA 50

196 L0188-09 PB3061-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE

EA 50

197 L0188-10 PB3062-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE

EA 50

198 L0188-11 PB3063-EDISON SCCR POWER DISTRIBUTION

BLOCKS 1 POLE

EA 50

199 L0190-00 9999SX04 AUXILLIARY CONTACTS SQUARE D EA 20

200 L0190-01 9999S1X10 AUXILLIARY CONTACTS SQUARE D EA 20

201 L0190-02 9999S1X11 AUXILLIARY CONTACTS SQUARE D EA 20

202 L0190-03 9999S1X12 AUXILLIARY CONTACTS SQUARE D EA 20

203 L0190-04 9999S1X14 AUXILLIARY CONTACTS SQUARE D EA 20

204 L0192-00 EATON 2 POLE BREAKER 3A 600V

DIN RAIL MOUNT, OR ALLEN BRADLEY 1492-

M2C030

EA 20

205 L0192-01 EATON 2 POLE BREAKER 5A 600V DIN RAIL

MOUNT, OR ALLEN BRADLEY 1492-M2C050

EA 20

206 L0192-02 EATON 2 POLE BREAKER 10A 600V

DIN RAIL MOUNT, OR ALLEN BRALEY 1492-

M2C100

EA 20

207 L0194-00 1 POLE D10-WMS1D10 240V BREAKER DIN RAIL EA 20

208 L0196-00 POWER PACT, CIRCUIT BREAKER, 240V,

SQUARE D #QB150

EA 8

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 28

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

209 L0198-00 CABLE, COPPER WIRE #14AWG 3 PAIRS TC

1000 FT REEL

FT 1000

210 L0198-01 CABLE, COPPER WIRE #14AWG 6 PAIRS TC

1000 FT REEL

FT 1000

211 L0198-02 CABLE, COPPER WIRE 4C/#3 TC 1000 FT REEL FT 1000

212 L0198-03 CABLE, COPPER WIRE 4C/#4 TC 1000 FT REEL FT 1000

213 L0198-04 CABLE, COPPER WIRE 4C/#6 TC 1000 FT REEL FT 1000

214 L0198-05 CABLE, COPPER WIRE 4C/#8 TC 1000 FT REEL FT 1000

215 L0200-00 HOFFMAN ENCLOSURE A48H3612GQRLP EA 6

216 L0201-00 FUSE TYPE KTK OR KLK 1AMP, LF- KLK010 EA 60

217 L0201-01 FUSE TYPE KTK OR KLK 3AMP, LF- KLK030 EA 60

218 L0201-02 FUSE TYPE KTK OR KLK 5AMP, LF- KLK050 EA 60

219 L0201-03 FUSE TYPE KTK OR KLK 10AMP, LF- KLK100 EA 60

220 L0203-01 3 POLE FUSE HOLDER 600VAC CLASS CC, 30AMP

MAX SQUARE D OR LITTELFUSE L60030C-

3PQDINR

EA 40

221 L0203-00 2 POLE FUSE HOLDER 600V 30A

MAX, LITTELFUSE #L60030C2PQDINR

EA 40

222 L0205-00 FUSE BLOCKS, LF SERIES, CLASS CC/CD, 3 POLES,

30 AMP RATING, CONNECTOR TYPE: PRESSURE

PLATE W/Q.C. TERMINAL, LITTELFUSE L60030C-

3PQDINR

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 29

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

223 L0207-00 FUSE HOLDER 2 POLE 600VAC LUG BOLT

BCA6032PQMT, LF-L60030M-2SQ

EA 20

224 L0209-00 HORN, 24 VAC, FEDERAL SIGNAL 350-024-30, OR

AB-855HFG24GPA

EA 40

225 L0211-00 PILOT LIGHT COMPLETE, 30 MM, 24V AC/DC

VOLTAGE, LAMP TYPE: LED, TERMINAL

CONNECTION: PRESSURE PLATE

EA 40

226 L0213-00 BEACON WARNING LIGHT, LED, 12

TO 24V AC/DC OR 120 TO 240V, AB-

855BSS35SL4

EA 40

227 L0215-00 HOFFMAN ALUMINUM FRONT PLATE AND BACK

PLATE A24P24AL

EA 20

228 L0215-01 HOFFMAN ALUMINUM FRONT PLATE AND BACK

PLATE A30P24AL

EA 20

229 L0215-02 HOFFMAN ALUMINUM FRONT PLATE AND BACK

PLATE A36P30AL

EA 20

230 L0215-03 HOFFMAN ALUMINUM FRONT PLATE AND BACK

PLATE A48P36AL

EA 20

231 L0217-00 PANEL KIT, SWING DOOR HOFFMAN ALUMINUM

PART# ANADFK

EA 20

232 L0219-00 SIZE 1 IEC TYPE STARTER 24V COIL SQUARE D OR

AB-100C30J10 + AB-193EEED

NO ALLEN BRADLEY

SQD LC1D183B7

EA 20

233 L0219-01 SIZE 2 IEC TYPE STARTER 24V COIL

SQUARE D OR AB- 100C85J10 + AB-193EEGE

NO ALLEN BRADLEY

SQD LC1D1156B7

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 30

PRICE

TOTAL

COST

BRAND NAME &

MANUFACTURER #

LEAD TIME

234 L0219-02 SIZE 3 IEC TYPE STARTER 24V COIL

SQUARE D OR AB- 100E116KJ11L + AB-193EEHJ

NO ALLEN BRADLEY

SQD LC1D1506B7

EA 20

235 L0219-03 SIZE 1 IEC TYPE STARTER 120V COIL SQUARE D

SQD LC1D183G7

NO ALLEN BRADLEY

EA 20

236 L0219-04 SIZE 2 IEC TYPE STARTER 120V COIL SQUARE

DSQD LC1D1156G7

NO ALLEN BRADLEY

EA 20

237 L0219-05 SIZE 3 IEC TYPE STARTER 120V COIL SQUARE D

SQD LC1D150G7

NO ALLEN BRADLEY

EA 20

238 L0220-00 RELAY, OVERLOAD SQUARE D 6.4A-32A LR9D32 EA 20

239 L0220-01 RELAY, OVERLOAD SQUARE D 60A-100A LR9D67 EA 20

240 L0220-02 RELAY, OVERLOAD SQUARE D 90A-150A LR9D69 EA 20

241 L0221-00 NON-ILLUMINATED SELECTOR SWITCH, 30 MM,

3, MAINTAINED, 2NO/2NC, LEVELER, SQUARE D

800T-J17A

B070-24 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 31

Special Instructions:

Material will be ordered as needed and be billed as such. The Purchase Order quantities are subject to BPUB’s right to increase or decrease as deemed necessary. Stipulate below, if an increase or decrease in quantities affects bid price: Quantities are estimates based on prior year usage history.

(_____) Yes, an increase or decrease in quantities affects bid price (_____) No, an increase or decrease in quantities will not affect bid price.

Company Name:

Company Address:

Authorized Company Representative:

(Print) Authorized Company Representative:

Signature – Failure to sign bid will disqualify it

Telephone #:

Fax #:

Email: _____________________________________________________________

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 32

REQUIRED FORMS CHECKLIST

The following forms are be submitted as a part of the Bid/RFP/RFQ document

NAME FORM DESCRIPTION SUBMITTED WITH

PROPOSAL

YES NO

Legal Notice

Acknowledgement Form

Debarment Certification

Ethics Statement

Conflict of Interest Questionnaire

Certification of Interested Party Form

Residence Certification

State Law Verification

House Bill 89 Verification

W9 or W8 Form

Special Instructions

Proposal Schedule Rate/Cost sheet completed and signed

Cashier Check or Bid Bond of 5% of Total Amount of Proposal (if applicable)

OSHA 300 Log (if applicable)

Contractor Pre-Bid Disclosure completed, signed and notarized (if applicable)

Sub-Contractor Pre-Bid Disclosure completed, signed, and notarized (if applicable)

References Complete the Previous Customer

Reference Worksheet for each reference provided

Addenda Other

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 33

CERTIFICATION REGARDING DEBARMENT, SUSPENSION, AND OTHER

RESPONSIBILITY MATTERS

(THIS FORM MUST BE COMPLETED IN ITS ENTIRETY AND SUBMITTED WITH PROPOSAL

RESPONSE)

Name of Entity:____________________________________________________

The prospective participant certifies to the best of their knowledge and belief that they and their principals:

a) Are not presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from covered transactions by any Federal department or agency:

b) Have not within a three year period preceding this proposal been convicted of or had a civil judgment rendered against them for commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a public (Federal, State, or local) transaction or contract under a public transaction; violation of Federal or State antitrust statutes or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, or receiving stolen property;

c) Are not presently indicted for or otherwise criminally or civilly charged by a government entity (Federal, State, Local) with commission of any of the offenses enumerated in paragraph (1) (b) of this certification; and

d) Have not within a three year period preceding this application/proposal had one or more public transactions (Federal, State, Local) terminated for cause or default.

I understand that a false statement on this certification may be grounds for rejection of this proposal or termination of the award. In addition, under 18 USC Section 1001, a false statement may result in a fine up to a $10,000.00 or imprisonment for up to five (5) years, or both.

Name and Title of Authorized Representative (Typed)

Signature of Authorized Representative Date

I am unable to certify to the above statements. My explanation is attached.

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 34

ETHICS STATEMENT

(THIS FORM MUST BE COMPLETED IN ITS ENTIRETY AND SUBMITTED WITH PROPOSAL

RESPONSE)

The undersigned Firm, by signing and executing this proposal, certifies and represents to the Brownsville Public Utilities Board that Firm has not offered, conferred or agreed to confer any pecuniary benefit, as defined by (1.07 (a) (6) of the Texas Penal Code, or any other thing of value as consideration for the receipt of information or any special treatment of advantage relating to this proposal; the Firm also certifies and represents that the Firm has not offered, conferred or agreed to confer any pecuniary benefit or other thing of value as consideration for the recipient’s decision, opinion, recommendation, vote or other exercise of discretion concerning this proposal, the Firm certifies and represents that Firm has neither coerced nor attempted to influence the exercise of discretion by any officer, trustee, agent or employee of the Brownsville Public Utilities Board concerning this proposal on the basis of any consideration not authorized by law; the Firm also certifies and represents that Firm has not received any information not available to other Firms so as to give the undersigned a preferential advantage with respect to this proposal; the Firm further certifies and represents that Firm has not violated any state, federal, or local law, regulation or ordinance relating to bribery, improper influence, collusion or the like and that Firm will not in the future offer, confer, or agree to confer any pecuniary benefit or other thing of value of any officer, trustee, agent or employee of the Brownsville Public Utilities Board in return for the person having exercised their person’s official discretion, power or duty with respect to this proposal; the Firm certifies and represents that it has not now and will not in the future offer, confer, or agree to confer a pecuniary benefit or other thing of value to any officer, trustee, agent, or employee of the Brownsville Public Utilities Board in connection with information regarding this proposal, the submission of this proposal, the award of this proposal or the performance, delivery or sale pursuant to this proposal.

THE RESPONDENT SHALL DEFEND, INDEMNIFY, AND HOLD HARMLESS THE

BROWNSVILLE PUBLIC UTILITIES BOARD, ALL OF ITS OFFICERS, AGENTS AND

EMPLOYEES FROM AND AGAINST ALL CLAIMS, ACTIONS, SUITS, DEMANDS,

PROCEEDING, COSTS, DAMAGES, AND LIABILITIES, ARISING OUT OF,

CONNECTED WITH, OR RESULTING FROM ANY NEGLIGENT ACTS OR OMISSIONS

OF CONTRACTOR OR ANY AGENT, EMPLOYEE, SUBCONTRACTOR, OR SUPPLIER

OF RESPONDENT IN THE EXECUTION OR PERFORMANCE OF THIS PROPOSAL.

I have read all of the specifications and general proposal requirements and do hereby certify that all items submitted meet specifications.

COMPANY: _______________________________________

AGENT NAME: ____________________________________

AGENT SIGNATURE: _______________________________

ADDRESS: ________________________________________

CITY: ____________________________________________

STATE: ____________________________ ZIP CODE: ________________

TELEPHONE: ________________________ TELEFAX: ___________________

FEDERAL ID#: ____________________ AND/OR SOCIAL SECURITY #: ___________

DEVIATIONS FROM SPECIFICATIONS IF ANY:

NOTE: QUESTIONS AND CONCERNS FROM PROSPECTIVE CONTRACTORS SHOULD

BE RAISED WITH OWNER AND ITS CONSULTANT (IF APPLICABLE) AND RESOLVED,

IF POSSIBLE, PRIOR TO THE PROPOSAL SUBMITTAL DATE. ANY LISTED DEVIATIONS

IN A FINALLY SUBMITTED PROPOSAL MAY ALLOW THE OWNER TO REJECT A

PROPOSAL AS NON-RESPONSIVE.

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 35

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 36

CERTIFICATE OF INTERESTED PARTIES-FORM 1295

Special message: Please read the Special Notification regarding HB 1295 effective January 1, 2016, implemented by the Texas Ethics Commission, which requires business entities to provide a completed Form 1295 to Brownsville PUB with signed contracts in order to execute them.

In 2015, the Texas Legislature adopted House Bill 1295. The law states that a governmental entity or state agency may not enter into certain contracts with a business entity unless the business entity submits a disclosure of interested parties to the governmental entity or state agency at the time the business entity submits the signed contract to the governmental entity or state agency. The law applies to a contract of a governmental entity or state agency that either (1) requires an action or vote by the governing body of the entity or agency before the contract may be signed or (2) has a value of at least $1 million. The disclosure requirement applies to a contract entered into on or after January 1, 2016.

To implement the law, the Texas Ethics Commission (TEC) adopted new rules necessary to prescribe the disclosure of interested parties form, and post a copy of the form on the commission’s website. The commission adopted the Certificate of Interested Parties form, Form 1295, on October 5, 2015. The commission also adopted new rules as part of Chapter 46 of the Texas Administrative Code on November 30, 2015.

On January 1, 2016, TEC made a new filing application available on their website for business entities to use to both create and file Form 1295. Business entities will enter the required information on Form 1295 within the application and print a copy of the completed form, which will include a certification of filing with a unique certification number. An authorized agent of the business entity will need to sign the printed copy of the form and have the form notarized. The completed Form 1295 with the certification of filing must be included with the signed contract to the governmental body or state agency in order for the governmental body to execute the contract.

Brownsville PUB will then notify the commission, using TEC’s filing application, of the receipt of the filed Form 1295 with the certification of filing not later than the 30th day after the date the contract binds all parties to the contract.

TEC will then post the business entity’s completed Form 1295 to its website within seven (7) business days after receiving notice from Brownsville PUB acknowledging that it was received.

To obtain additional information on HB 1295, to learn more about TEC’s process to create a new account or to complete an electronic version of Form 1295 for submission with a signed contract, please go to the following link: https://ethics.state.tx.us/whatsnew/elf_info_form1295.htm

NOTE: IF AWARDED THIS CONTRACT, FORM 1295 WILL BE SUBMITTED AT THE

TIME THE SIGNED CONTRACT IS SUBMITTED TO BPUB. ____YES ____NO

https://ethics.state.tx.us/whatsnew/elf_info_form1295.htm

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 37

CERTIFICATE OF INTERESTED PARTIES FORM 1295

Complete Nos. 1 - 4 and 6 if there are interested parties.

Complete Nos. 1, 2, 3, 5, and 6 if there are no interested parties.

OFFICE USE ONLY

1 Name of business entity filing form, and the city, state and country of the business entity's place of business.

2 Name of governmental entity or state agency that is a party to the contract for which the form is being filed.

3 Provide the identification number used by the governmental entity or state agency to track or identify the contract, and provide a description of the goods or services to be provided under the contract.

Name of Interested Party

City, State, Country (place of business)

Nature of Interest (check applicable)

Controlling Intermediary

5 Check only if there is NO Interested Party.

6 UNSWORN DECLARATION

My name is ____________________________________________, and my date of birth is ____________________________.

My address is ___________________________________, __________________, _____, ____________, ________________.

(street) (city) (state) (zip code) (country)

I declare under penalty of perjury that the foregoing is true and correct.

Executed in __________________County, State of ____________, on the ________day of ______________, 20_____.

(month) (year)

Signature of authorized agent of contracting business entity (Declarant)

ADD ADDITIONAL PAGES AS NECESSARY

Form provided by Texas Ethics Commission www.ethics.state.tx.us Revised 12/22/2017 http://www.ethics.state.tx.us/

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 38

RESIDENCE CERTIFICATION

In accordance with Art. 601g, as passed by the 1985 Texas Legislature, the following will apply. The pertinent portion of the Act has been extracted and is as follows:

Section 1. (a)

(1) "Nonresident bidder" means a bidder whose principal place of business is not in this state, but excludes a contractor whose ultimate parent company or majority owner has its principal place of business in this state.

(2) "Texas resident bidder " means a bidder whose principal place of business is in this state, and includes a contractor whose ultimate parent company or majority owner has its principal place of business in this state.

Section 1. (b)

The state or governmental agency of the state may not award a contract for general construction, improvements, services, or public works projects or purchases of supplies, materials or equipment to a nonresident bidder unless the nonresident's bid is lower than the lowest bid submitted by a responsible Texas resident bidder by the same amount that a Texas resident bidder would be required to underbid a nonresident bidder to obtain a comparable contract in the state in which the nonresident's principal place of business is located.

I certify that _________________________________________________ (Company Name) is a resident Texas bidder as defined in Art. 601g.

Signature:

Print Name: _______

I certify that Company Name) is a nonresident bidder as defined in Art. 601g. and our principal place of business is:

(City and State)

Signature:

Print Name:

B090-25 ELECTRICAL AND ELECTRONIC SPARE PARTS PAGE 39

State Law Verifications

I, ______________________________________ (Person’s name), the…