REQUEST FOR QUOTATION

PLEASE RETURN TO:

US Army Corps of Engineers US Army Corps of Engineers

ILWW Mini Track

Loader

W912EK26QA060

Email: joseph.e.porter@usace.army.mil

PLEASE INCLUDE THE FOLLOWING INFORMATION:

1. Complete Block 17a on the SF1449 - Enter Name, Address, and Current Phone Number of Person to

Contact Regarding Proposal

2. Complete and sign Blocks 30a, 30b, and 30c on the SF1449

3. Please review clause FAR 52.212-2.

4. Please fill out the the below information completely and include this cover page with your offer, along with the above items that need to be filled out.

5. Include the Solicitation Number on the outside of the subject line when submitting by email pdf format.

It is the responsibility of the offeror to verify that their offer has been received and is legible when using a method other than electronic format to submit an offer.

Contractors must be current in their registration in the System for Award Management

(SAM) Database before a Government Contract award can be made.https://www.sam.gov/

Please provide: Taxpayer ID Number: ____________________________

UEI (SAM):_______________________________

Point of Contact: _________________________________

Phone & Email: __________________________________

FOR ADDITIONAL INFORMATION, CONTACT:

Joseph Porter-

Email: joseph.e.porter@usace.army.mil

WOMEN-OWNED SMALL

BUSINESS (WOSB)

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect 8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NUMBER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

REQUEST

FOR QUOTE

(RFQ)

INVITATION

FOR BID

(IFB)

REQUEST

FOR

PROPOSAL

(RFP)

SEE ADDENDUM

19.

ITEM NUMBER

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH

AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND

ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED

29. AWARD OF CONTRACT: REFERENCE OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NORTH AMERICAN

INDUSTRY CLASSIFICATION

STANDARD (NAICS):

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

8(A)

ECONOMICALLY

DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.

calls)

Section A - Solicitation/Contract Form

ILWW FY26 LaGrange Mini Track LoaderInstrument Name:

Product Service Code : 2410

Questions: Technical inquiries and questions relating to this solicitation are to be submitted via email to Joseph Porter at joseph.e.porter@usace.army.mil and no later than 9 September 2026 at 10: 00 AM Central.

Pursuant to Executive Order (EO) 14275, Restoring Common Sense to Federal Procurement; EO 14265, Modernizing Defense Acquisitions and Spurring Innovation in the Defense Industrial Base and Office of Management and Budget Memorandum M-25-26, Overhauling the Federal Acquisition Regulation (May 2, 2025), Class Deviation 2026-O0038 was issued by the Department of War effective February 1, 2026 announcing the U.S. Government is operating under the Revolutionary FAR Overhaul (RFO), which specifically mandates the use of the RFO for FAR Part 52 and its applicable clauses. All legacy contracts will follow the legacy FAR through completion, unless specifically modified. All future procurements will align with the streamlined RFO. It is incumbent upon any potential offerors to verify the current status of RFO clauses and meet the revised criteria under the deviation.

Purchase Description

LaGrange Lock and Dam

Mini Track Loader Procurement

1. Objective:

W912EK26QA060

This scope of work includes the procurement and delivery of one (1) commercial-grade, stand-on compact mini track loader. The vendor shall be responsible for the supply, preparation, delivery, testing, and initial training of the machine in accordance with the specifications and terms outlined below.

Item Description /Requirement

Quantity Unit Price Extended Price

0001 Mini Track Loader- Wide track with CII Universal Coupler.

1 $ $

Grand Total $

NOTE: The unit/extended prices shall include shipping and handling. Do not separately price shipping and handling.

2. Equipment Specifications:

2.1 Engine and Drivetrain

- Engine Type: Fuel-efficient, liquid-cooled diesel engine.

- Emission Compliance: Tier 4 Final compliant without requiring Diesel Exhaust Fluid (DEF) or active DPF regeneration cycles.

- Engine Power (Gross): Minimum 24.8 hp.

- Fuel Tank Capacity: Minimum 7.9 US.

- Electrical System: Standard 12 volt alternator and a maintenance-free battery with at least 540 Cold Cranking Amps (CCA).

- Travel Speed: Single-speed hydrostatic drive offering a maximum travel speed of at least 4.7 mph in both forward and reverse directions.

- Parking Brake: Spring-Applied Hydraulic-Released (SAHR) pin brake or equivalent fail-safe system.

2.2 Performance & Capacities (Wide Track Configuration)

- Lift Geometry: Radial lift arm configuration optimized for durability, digging performance, and forward reach.

- Rated Operating Capacity (ROC) at 35% Tipping Load: Minimum 1,102 lbs.

- Rated Operating Capacity (ROC) at 50% Tipping Load: Minimum 1,574 lbs.

- Tipping Load: Minimum 3,148 lbs.

- Hinge Pin Height: Minimum 86.7 inches at maximum lift height.

- Dump Height: Minimum 61.0 inches with a standard utility bucket.

- Reach at Max Dump: Minimum 20.1 inches at maximum height with a 48 dump angle.

2.3 Physical Dimensions & Track Configuration

To maximize flotation, lateral stability, and tractive effort, the unit must be delivered with the factory wide-track option:

- Track Width: 10-inch-wide rubber tracks.

- Ground Contact Area: Minimum 825 sq. in. of total track on the ground.

- Ground Pressure: Maximum 4.6psi to minimize damage to turf and soft soil.

- Machine Overall Width (Without Bucket): Maximum 40.5 inches.

- Track Gauge (Center-to-Center): Approximately 30.6 inches.

- Track Length on Ground: Minimum 41.9 inches.

- Overall Length (Without Bucket): Maximum 85.6 inches.

- Transport Length (With Platform Folded/Raised): Maximum 85.0 inches.

- Overall Height (To Top of Machine Frame): Maximum 56.5 inches.

- Ground Clearance: Minimum 8.7 inches.

- Operating Weight: Approximately 3,783 lbs with the wide track system, full fluids, and a standard operator.

2.4 Hydraulics, Interface, & Electrical Connectivity

- Auxiliary Hydraulic Flow: Minimum 13.0 gpm up to 13.2 gpm at system operating pressure.

- System Operating Pressure: Minimum 2,800 psi.

- Cooling Package: Forward-mounted or highly isolated cooling layout designed to vent engine heat forward and away from the operator platform.

- Attachment Interface: Universal Common Industry Interface (CII) quick-attach coupler plate compatible with industry-standard compact utility loader attachments.

- Electrical Auxiliary Connection: Standard 14 pin electrical connector located at the front of the lift arms to power electronic control functions on advanced attachments.

2.5 Operator Platform & Controls

- Ride-On Platform: Integrated, heavy-duty stand-on platform with suspension /cushioning to reduce operator fatigue over rough terrain. The platform must fold up to reduce transport footprints.

- Controls: Ergonomic, low-effort ISO pattern hydraulic pilot joystick controls. A dedicated joystick or integrated thumbwheel must provide proportional control of auxiliary hydraulics.

- Instruments & Gauges: Clear, weather-resistant digital display showing engine hours, fuel level, battery voltage, engine temperature, oil pressure warning, and active system alerts.

2.6 Attachments (Compatible with the Common Industrial Interface System)

- Standard Dirt/Construction Bucket: Plug & Play Ready, sized specifically for the wide-track width (Minimum 42 inches width).

- 48-inch Pallet Forks: Plug & Play Ready commercial-grade, heavy-duty frame , rated to match the loader's tipping capacity.

- Mini Light Material Blade: Plug & Play Ready, designed for moving light soils, mulch, or snow, featuring hydraulic angle adjustments (Minimum 60-inch width).

- Mini Grapple Rod Bucket: Plug & Play Ready, skeleton-style bottom with heavy-duty dual hydraulic cylinders to secure bulky materials, brush, and demolition debris.

3. Delivery, Logistics, & Inspection

- Delivery Site: LaGrange Lock and Dam 714 1965E St. Versailles, IL 62378

- Delivery Timeline: The equipment must be delivered within 90 calendar days from the date of award.

- Delivery Terms: The vendor is responsible for all transport costs and freight.

Delivery shall be Monday-Thursday between 7am-4pm, excluding Fridays and holidays.

- Offloading: Government site personnel have a fork truck available for offloading.

- Pre-Delivery Inspection (PDI): The vendor must conduct a full PDI on the unit before shipment, ensuring all systems (hydraulic, mechanical, electrical, and safety) are operating in peak condition.

4. Inspection & Acceptance Testing

Upon delivery to the specified location, a representative of the procuring entity will inspect the machine:

- Visual Inspection: Verify that the machine is brand new, free of paint chips, rust, fluid leaks, or shipping damage, and that all ordered configurations (such as the wide track system and attachments) are present.

- Functional Test: The machine will be started and run through standard operations (driving, steering, lifting, dumping, auxiliary hydraulic circuit activation, and connection of all included attachments) to verify nominal performance.

- Acceptance Sign-Off: If the machine and its attachments meet all technical criteria and pass physical inspection, an Acceptance Certificate will be signed, initiating the invoicing and warranty period.

5. Warranty, Support, & Training

- Warranty Period: Minimum of a 2-year or 2,000-hour (whichever occurs first) full-machine limited manufacturer's warranty covering parts and labor.

- Technical Training: Upon delivery, the vendor's technician or representative must provide a minimum of one (1) hour of on-site familiarization training for operating personnel, covering safe operation, daily preventative maintenance checks, attachment mounting (including hydraulic hookups for the grapple bucket), and basic troubleshooting.

*** END OF NARRATIVE ***

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quanti ty

Unit Unit Price Amount

0001 ILWW FY26 LaGrange Mini Track Loader Purchase

Product Service Code: 2410

Pricing Arrangement: Firm Fixed Price

1 Each

Section C - Description/Specifications/Statement of Work

Requirements Purchase of ILWW LaGrange Mini Track Loader

Section E - Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

0001 Inspection and Acceptance Location

Both Destination Instructions: See Purchase Description

DoDAAC: 965149 CountryCode: USA

ARMY CORPS OF ENGINEERS CIVIL WORKS

LAGRANGE LOCK, RURAL ROUTE NO 1

VERSAILLES, IL 62378

UNITED STATES

Section F - Deliveries or Performance

0001 Delivery Schedule From date of lead time event to delivery 90 Calendar Days

Date of Award 1 EachQuantity

Address and POC Ship To DoDAAC: 965149 CountryCode: USA

ARMY CORPS OF ENGINEERS CIVIL WORKS

LAGRANGE LOCK, RURAL ROUTE NO 1 VERSAILLES, IL 62378 UNITED STATES

Special Handling/Notes FoB Details

Party to Pay Transportation Cost: Contractor

Point Type: Destination

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

2017-01

52.204-13 System for Award Management- Maintenance. (Deviation 2026- O0038)

2026-02

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026- O0038)

2026-02

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations.

(Deviation 2026-O0038)

2026-02

52.212-4 Terms and Conditions- Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-02

52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026- O0038)

2026-02

52.222-3 Convict Labor. (Deviation 2026- O0038)

2026-02

52.222-19 Child Labor-Cooperation with Authorities and Remedies.

(Deviation 2026-O0038)

2026-03

52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026- O0038)

2026-02

52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038)

2026-02

52.222-90 Addressing DEI Discrimination by Federal Contractors.

(Deviation 2026-O0040, Revision 1)

2026-04

52.223-23 Sustainable Products. (Deviation 2026-O0038)

2026-02

52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act.

(Deviation 2026-O0038) (Alternate II)

2026-02 Alternate

II

2026-02

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving.

2024-05

52.232-33 Payment by Electronic Funds Transfer-System for Award Management.

2018-10

52.232-40 Providing Accelerated Payments to Small Business Subcontractors.

2023-03

52.233-3 Protest after Award. (Deviation 2026-O0038)

2026-02

52.233-4 Applicable Law for Breach of 2026-02

Contract Claim. (Deviation 2026- O0038)

52.240-91 Security Prohibitions and Exclusions. (Deviation 2026- O0038)

2026-02

52.243-1 Changes-Fixed-Price. (Deviation 2026-O0038)

2026-02

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-04

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

2011-09

252.203-7002 Requirement to Inform Employees of Whistleblower Rights.

2022-12

252.204-7004 Antiterrorism Awareness Training for Contractors.

2023-01

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

2024-05

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment

2023-01 or Services.

252.223-7008 Prohibition of Hexavalent Chromium.

2023-01

252.225-7001 Buy American and Balance of Payments Program.

2024-02

252.225-7002 Qualifying Country Sources as Subcontractors.

2022-03

252.225-7012 Preference for Certain Domestic Commodities.

2022-04

252.225-7036 Buy American-Free Trade Agreements--Balance of Payments Program.

2024-02

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

2023-01

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

2023-06

252.232-7010 Levies on Contract Payments. 2006-12

252.247-7023 Transportation of Supplies by Sea.

2024-10

FAR Clauses Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

52.219-28 Postaward Small Business 2026-02

Program Rerepresentation.

(Deviation 2026-O0038)

Postaward Small Business Program Rerepresentation (Feb 2026) (Deviation 2026-O0038)

(a) Definitions. As used in this clause-

Long-term contract means a contract of more than five years in duration, including options.

However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document /support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it [ ] is, [ ] is not a small business concern under ____NAICS Code assigned to ____contract number.

(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1001.

(3) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The Contractor represents that it [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [____The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(4) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The Contractor represents that it [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [____The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __ .]

(5) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program. The Contractor represents that it [ ] is, [ ] is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402.

[____The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(6) HUBZone joint venture eligible under the HUBZone Program.[ Complete only if the offeror is a HUBZone small business concern. ] The offeror represents, as part of its offer, that It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [____The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [____Contractor to sign and date and insert authorized signer's name and title.]

(End of clause)

Section K - Representations, Certification, & Other Statements

FAR Provisions Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions.

2024-09

52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026- O0038)

2026-02

DFARS Provisions Incorporated by Reference

Date

Alternate Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials.

2022-09

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.

2016-10

252.225-7055 Representation Regarding Business Operations with the Maduro Regime.

2022-05

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-

2023-06

Representation.

FAR Provisions Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Alternate II)

2026-02 Alternate

II

2025-01

Alternate II (Jan 2025). As prescribed in 25.601(b)(2)(ii), substitute the following paragraph (b) for paragraph (b) of the basic provision:

(b) The offeror certifies that the following supplies are Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act".

Israeli End Products:

Line Item No.

[List as necessary]

DFARS Provisions Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

252.204-7016 Covered Defense Telecommunications Equipment or Services-Representation.

2019-12

COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-

REPRESENTATION (DEC 2019)

(a) Definitions. As used in this provision, "covered defense telecommunications equipment or services" has the meaning provided in the clause 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered defense telecommunications equipment or services".

(c) Representation. The Offeror represents that it [ ] does, [ ] does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(End of provision)

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation.

2021-05

PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS

EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the

Government in the performance of any contract, subcontract, or other contractual instrument."

(a) Definitions. "Covered defense telecommunications equipment or services," "covered mission," "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) Prohibition. Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at https://www.sam.gov for entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) Representation. If in its annual representations and certifications in SAM the Offeror has represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it [ ] will [ ] will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) Disclosures. If the Offeror has represented in paragraph (d) of this provision that it "will provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

252.225-7000 Buy American--Balance of Payments Program Certificate.

2024-02

BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)

(a) Definitions. "Commercially available off-the-shelf (COTS) item," "component," "critical component," "critical item," "domestic end product," "foreign end product," "qualifying country," "qualifying country end product," and "United States," as used in this provision, have the meanings given in the 252.225-7001, Buy American and Balance of Payments Program-Basic clause of this solicitation.

(b) Evaluation. The Government-

(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American and Balance of Payments Program-Basic clause of this solicitation, the Offeror certifies that-

(i) Each end product, except those listed in paragraphs (c)(2) or (3) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c)(4) of this provision contains a critical component or a critical item; and

(ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. For those end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select "no".

(2) The Offeror certifies that the following end products are qualifying country end products:

Line Item Number Country of Origin

(3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select "no".

Line Item Number Country of Origin (If known) Exceeds 55% Domestic Content (yes/no)

(4) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component or a critical item (see Federal Acquisition Regulation 25.105).

Domestic end products containing a critical component or a critical item:

Line Item Number ____

[List as necessary]

252.225-7035 Buy American--Free Trade Agreements--Balance of Payments Program Certificate.

2024-02

BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM

CERTIFICATE-BASIC (FEB 2024)

(a) Definitions. "Bahraini end product," "commercially available off-the-shelf (COTS) item," "component," "critical component," "critical item," "domestic end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "foreign end product," "Moroccan end product," "Panamanian end product," "Peruvian end product," "qualifying country end product," and "United States," as used in this provision, have the meanings given in the 252.225-7036, Buy American-Free Trade Agreements-Balance of Payments Program-Basic clause of this solicitation.

(b) Evaluation. The Government-

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) For line items subject to the Buy American-Free Trade Agreements-Balance of Payments Program-Basic clause of this solicitation, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American-Free Trade Agreements-Balance of Payments Program-Basic clause of this solicitation, the Offeror certifies that-

(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product;

(ii) Each domestic end product listed in paragraph (c)(3) of this provision contains a critical component or a critical item; and

(iii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The Offeror shall identify all end products that are not domestic end products.

(i) The Offeror certifies that the following supplies are qualifying country (except Australian) end products:

____(Line Item Number) ____(Country of Origin)

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products:

____(Line Item Number) ____(Country of Origin)

(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except those that are COTS items. If the percentage of the domestic content is unknown, select "no".

Line Item Number Country of Origin (If known) Exceeds 55% Domestic Content (yes/no)

(3) The Offeror shall list the line item numbers of domestic end products that contain a critical component or a critical item (see section 25.105 of the Federal Acquisition Regulation).

Line Item Number: ____[List as necessary]____

Section L - Instructions, Conditions, & Notices to Offerors or Quoters

FAR Provisions Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements- Representation.

2017-01

52.204-7 System for Award Management- Registration. (Deviation 2026- O0038)

2026-02

52.212-1 Instructions to Offerors- Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-02

52.214-34 Submission of Offers in the English Language.

1991-04

52.214-35 Submission of Offers in U.S.

Currency.

1991-04

DFARS Provisions Incorporated by Reference

Date

Alternate Deviation

Variation Effective Date

252.204-7024 Notice on the Use of the Supplier Performance Risk System.

2023-03

Section M - Evaluation Factors for Award

FAR Provisions Incorporated by Full Text

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.212-2 Evaluation-Commercial Products and Commercial Services.

(Deviation 2026-O0038)

2026-02

Evaluation-Commercial Products and Commercial Services (Feb 2026) (Deviation 2026-O0038)

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

PRICE

(b) . The Government will evaluate offers for award purposes by adding Options (if applicable) the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(c) . A written notice of award or acceptance of an offer furnished to the Notice of award successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

KO CONTRACTING DIVISION, 1 ROCK ISLAND ARSENAL

ROCK ISLAND, IL 61299-5001

UNITED STATES

JOSEPH PORTER, EMAIL: JOSEPH.E.PORTER@USACE.ARMY.MIL TELEPHONE: (309) 794-5333

LAGRANGE LOCK, RURAL ROUTE NO 1

VERSAILLES, IL 62378

UNITED STATES