B08 W912CN-24-Q-0016 01 SF1449_Due Date Ext.pdf

SEE ADDENDUM

(No Collect Calls)

W912CN24Q0016 15-Mar-2024

b. TELEPHONE NUMBER

808.787-8841

8. OFFER DUE DATE/LOCAL TIME

06:00 PM 15 Apr 2024

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912CN9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

EMELINE CHING

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

0012083041-0001

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

413 CSB

413TH CSB, RCO-HAWAII,

742 SANTOS DUMONT AVENUE

BLDG 108, 3RD FLOOR (WAAF)

SCHOFIELD BARRACKS HI 96857-5026

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W90TYS 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

545TH TRANSPORTATION COMPANY

CW2 TEMPLE, AUSTIN W.

A-5 PIERS

JBPHH HI 96818

TEL: 831-224-4066 FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$19,000,000

NAICS:

238220

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF32

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912CN24Q0016

Section SF 30 - BLOCK 14 CONTINUATION PAGE

CLAUSES INCORPORATED BY FULL TEXT

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation and the lowest price technically acceptable.

(b) n/a

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party.

(End of provision)

52.237-1 SITE VISIT (APR 1984)

Offerors or quoters are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award.

ADDENDUM TO 52.237-1

OPTIONAL SITE VISIT :

An optional site visit is recommended and may be arranged upon request prior to the solicitation closing date by contacting the contract specialist via email to Emeline Ching at emeline.y.ching.civ@army.mil Please contact the Pass & ID office at 808-449-0865, Mon - Friday 6:00AM to 6:00 PM HST, to confirm required documents if a base pass to access Joint Base Pearl Harbor-Hickam is needed to attend a site visit. The Pass & ID office located at 1250 South Drive, Honolulu, HI 96818. If a pass cannot be obtained, contact the Contract Specialist, Emeline Ching at emeline.y.ching.civ@army.mil or (808) 787-3654.

Section SF 1449 - CONTINUATION SHEET

PWS

PERFORMANCE WORK STATEMENT (PWS)

for

U.S. Army Logistical Support Vessel USAV SSGT Robert T Kuroda (LSV-7) Air Conditioning (A/C) Chiller Plant Inspection and Repair Services

1. GENERAL: This is a non-personal service contract under which personnel rendering the services(s) are not subject, either by the contract’s terms or by the manner of its administration, to the supervision and control usually prevailing in relationships between the Government and its employees.

1.1 Description of Services/Introduction: This is a non-personal, firm, fixed-price service contract to provide background and scope of work for the repair/replacement of the LSV-7’s A/C Chiller Plants. The required work consists of thorough technical inspection of all major components and refrigerant lines, which includes all piping, valves, and fittings, and repair/replacement of any leaks and/or faulty components.

1.2 Background: The 411th Transportation Detachment provides cargo logistics support in the INDOPACOM area of operation. The main A/C plants provide cooling for the entire ship, to include navigation equipment, mechanical sections, and maintains the environment of the personnel areas within the skin of the ship.

1.3 Scope: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items necessary to perform services as described in the Performance Work Statement (PWS) and associated contract documents, except for those items specified in Part 3 Government-Furnished Property and Services. The contractor shall perform to the standards and acceptable quality levels identified in this PWS and associated contract documents.

1.4 Objectives: The objective of this contract is to provide inspection and repair services to bring the air conditioning systems aboard the LSV-7 back to Fully Mission-Capable status for upcoming missions.

1.5 General Information: Vessel Data: Model: LSV-7 Class

National Stock Number: 1915-01-495-0036 Length, Overall: 314 Ft Beam: 60 Ft Draft Light: 6 Ft Draft Loaded: 12 Ft Goss Tons: 4,809

Chiller Plants: Manufacturer/Model Purchased/installed: 2012

Carrier Transcold 90RMC-065 Seahorse R404a Condensing Units

1.5.1 Quality Control Plan (QCP): The contractor shall develop and maintain an effective quality control program to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to ensure all contract requirements are met, and to identify, and ensure prevention of defective services.

The contractor’s quality control program is the means by which the Contractor assures work complies with the requirements of the contract. The QCP shall include but not be limited to: specification(s) of the method of identifying and preventing deficiencies in the required services, the types, methods, and frequency of all inspections conducted by the contractor, corrective action(s) and preventive action plan, for when deficiencies are found. After acceptance of the quality control plan the contractor shall receive the contracting officer’s acceptance in writing of any proposed change to his QC system.

1.5.2 Quality Assurance: The government will evaluate the contractor's performance under this agreement in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the government must do to ensure the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable quality levels (performance thresholds) and/or defect rates.

1.5.3 Recognized Holidays: Work shall be performed on U.S. federally recognized holidays occurring during the normal workweek unless otherwise directed by the contracting Officer. When a U.S. holiday occurs on a Saturday or a Sunday, the holiday is observed on the preceding Friday or following Monday, respectively.

New Year’s Day (January 1) Labor Day (1st Monday in September)

Martin Luther King’s Birthday (3rd Monday in January) Columbus Day (2nd Monday in October) Washington’s Birthday (3rd Monday in February) Veterans’ Day (November 11) Memorial Day (last Monday in May) Thanksgiving Day (4th Thursday in November) Juneteenth National Independence Day (June 19) Christmas Day (December 25) Independence Day (July 4)

1.5.4 Operating Hours: The contractor is responsible for conducting business, between the hours of 0900-1700 Monday thru Friday except when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential as well as ensuring access to a government installation.

1.5.5 Training Holidays: USARPAC has historically granted military personnel training holidays as compensation for time that they spent in the field training. These are typically combined with regular holiday leave schedules. Training holidays may affect access to military operated facilities. If scheduled work or access to facilities is required, coordination with occupants will be necessary or the work in affected facilities shall be rescheduled after the training holiday. However, announced training holidays or exodus of military personnel may provide the Contractor with an opportunity or unrestricted access to facilities and areas. The contractor shall take full advantage of such opportunities by planning maintenance or actions that are better accomplished when such areas are vacant.

1.5.6 Place of Performance: The work to be performed under this contract will be performed onboard the LSV-7, currently located at A5 pier on Joint Base Pearl Harbor-Hickam, Hawai’i (JBPHH).

1.6 Security Requirements: There are no known requirements to handle classified data in any aspect of fulfilling this contract. All work performed relative to the tasking identified in the PWS is unclassified or carries a Privacy Act Classification.

1.6.1 - 1.6.2 – RESERVED

1.6.3 Installation Access: Access to U.S. installations, buildings and controlled areas is limited to personnel who meet security criteria and are authorized. Failure to submit required information/data and obtain required documentation or clearances will be grounds for denying access to U.S. installations, buildings and controlled areas.

The Contractor shall ensure that any subcontractors used in performance of this contract complies with these requirements and that all employees, of both the Contractor and any subcontractor utilized by the Contractor, are made aware of and comply with these requirements.

The Contractor shall be aware of and comply with the requirements associated with Installation Access Control. The Government is not liable for any costs associated with performance delays due solely to a firm’s failure to comply with Installation Access Control System (IACS) processing requirements.

The Contractor shall return installation passes to the issuing IACS office when the contract is completed or when a Contractor employee no longer requires access.

1.6.3.1 to 1.6.3.4 RESERVED

1.6.3.5 Key Control: The Contractor shall establish and implement methods of making sure all keys/key cards issued to the Contractor by the Government are not lost or misplaced and are not used by unauthorized persons.

NOTE: All references to keys include key cards. No keys issued to the Contractor by the Government shall be duplicated. The Contractor shall develop procedures covering key control that shall be included in the Quality Control Plan. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The Contractor shall immediately report any occurrences of lost or duplicate keys/key cards to the Contracting Officer.

1.6.3.5.1 Lost/Duplicate Keys: In the event keys, other than master keys, are lost or duplicated, the Contractor shall, upon direction of the Contracting Officer, re-key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the replacement of locks or re-keying is performed by the Government, the total cost of re-keying or the replacement of the lock or locks shall be deducted from the monthly payment due the Contractor. In the event a master key is lost or duplicated, all locks and keys for that system shall be replaced by the Government and the total cost deducted from the monthly payment due the Contractor.

1.6.3.5.2 Key Use: The Contractor shall prohibit the use of Government-issued keys/key cards by any persons other than the Contractor’s employees. The Contractor shall prohibit the opening of locked areas by Contractor employees to permit entrance of persons other than Contractor employees engaged in the performance of assigned work in those areas, or personnel authorized entrance by the Contracting Officer.

1.6.3.5.3 Lock Combinations: The Contractor shall establish and implement methods of ensuring that all lock combinations are not revealed to unauthorized persons. The Contractor shall ensure that lock combinations are changed when personnel having access to the combinations no longer have a need to know such combinations.

These procedures shall be included in the Contractor’s Quality Control Plan

1.6.4 - RESERVED

1.6.5 Physical Security: The contractor shall be responsible for safeguarding all government equipment, information and property provided for contractor use. At the close of each work period, government facilities, equipment, and materials shall be secured.

1.6.6 Operations Security (OPSEC) Requirements: Contractor personnel shall adhere to facility security policies and restrictions. The Contractor shall immediately report suspicious activities to security personnel.

1.6.6.1 International Traffic in Arms Regulation (ITARS): The Contractor shall maintain a system compliant with ITARs requirements (22 CFR §§ 120, et seq.). This shall include a requirement to ensure that military information is not exported to non-U.S. sources, unless an appropriate license has been obtained.

1.7 Combating Trafficking in Persons (CTIP): In accordance with FAR 52.222-50, the KO will be notified immediately of any information from any source that alleges a Contractor employee, subcontractor and/or subcontractor employee has engaged in conduct that violates the United States Government “zero” tolerance policy regarding trafficking in persons. Trafficking in Persons, also referred to as human trafficking, is the use of force, fraud, or coercion to compel a person to provide labor, services, or commercial sex. Any minor (under 18 years of age) involved in commercial sex is a victim of human trafficking.

1.7.1 Trafficking in Persons includes elements of recruiting, harboring, transporting, providing, or obtaining a person for the purpose of exploitation. The United States Government has adopted a policy prohibiting trafficking in persons – CTIP. All contractors shall follow all the requirements stated in FAR clause 52.222-50 – Combatting Trafficking in Persons.

1.7.2 CTIP compliance is a contractual requirement that contractors shall follow. The authority for KOs/QASs/CORs to surveil the contract and perform CTIP inspections lies in the clause 52.222-50 Combating Trafficking in Persons. Additionally, contractors are required to fully cooperate with the Government in our surveillance of CTIP compliance. Contracting Officers may inspect any contract regardless of if a formal CTIP plan is required.

1.8 Post-Award Conference/Periodic Progress Meetings: The Contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The contracting officer, Contracting Officers Representative (COR), and other Government personnel, as appropriate, may meet periodically with the contractor to review the contractor's performance. At these meetings the contracting officer will apprise the contractor of how the government views the contractor's performance and the contractor will apprise the Government of problems, if any, being experienced.

Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government.

1.9 Contracting Officer Representative (COR): Refer to Part 2 of this PWS for the definition of a COR. As determined by the Contracting Officer, a COR will be appointed and identified by letter of designation, a copy of which will be provided to the Contractor by the Contracting Officer. The designation letter states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates, or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is not authorized to obligate the Government. If the work is not written in the contract, the COR is not authorized to request new work.

The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract, perform inspections necessary in connection with contract performance, maintain written and oral communications with the Contractor concerning technical aspects of the contract, issue written interpretations of technical requirements, including Government drawings, designs, specifications, monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies, coordinate availability of Government property, and coordinate site entry of Contractor personnel.

1.10 Key Personnel: The following personnel are considered key personnel by the Government: The Contractor shall designate in writing a Program Manager/Contract Manager for this contract, and a supervisor, who must be fluent in understanding, speaking, reading and writing the English Language. The Program Manager shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the Contractor when the manager is absent shall be submitted in writing to the Contracting Officer and COR. The contract manager or alternate shall have full authority to act for the Contractor on all contract matters relating to daily operation of this contract.

The Contractor shall ensure at least one contract representative is physically present during any activity associated with the contract. Contractor representatives shall receive at a minimum of 24 hours’ advance notice of any necessary meeting with Government personnel. The Contractor shall ensure all employees, and subcontracted employees have prior craft/trade experience comparable to duties required under this contract. The Contractor shall ensure all craftsmanship meets current industry standards, codes and/or regulations applicable to the contracted work ordered.

1.11 Identification of Contractor Employees: All contract personnel attending meetings, answering Government telephones, and working in other situations where their Contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. They must also ensure that all documents or reports produced by contractors are suitably marked as Contractor products or that Contractor participation is appropriately disclosed. The Contractor shall ensure that all personnel display the badge on the outermost garment at all times when performing work under this contract. This requirement shall apply to all subcontractor employees.

1.12 RESERVED

1.13 Contractor Travel: All repairs can be done pier-side or aboard the docked vessel. No travel aboard the LSV-7 is required to complete the required inspections and repairs.

1.14 - 1.18 RESERVED

1.19 Organizational Conflict of Interest (OCI): Contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.20 RESERVED

1.21 Safety: The Contractor shall comply with all Federal, State, and applicable occupational/industry codes governing on-site safety and health protection.

1.2.1.1 The Contractor shall provide medical services for the contractor's personnel. All injuries or illnesses shall be reported immediately to the Contracting Officer and COR. The Government is permitted to provide emergency medical care to all on-site contractors; however, IAW DFARS 252.2257040 (c) (2) (i)- (ii), the Contractor shall be responsible to reimburse the Government for such care.

1.2.1.1.1 All examinations and tests required to be performed by the Contractor shall be subject to the surveillance of the Contracting Officer’s Representative (COR). Prior to the commencement of any such examinations or tests, the Contractor shall give a written two (2) hour notice to the Contracting Officer’s Representative (COR) of the date, time and place where said examinations and tests will be conducted.

1.2.1.1.2 Any notice furnished to the Contracting Officer’s Representative (COR) less than two (2) hours prior to the end of the work day will be conducted on the next scheduled work day of the Contracting Officer’s Representative (COR). Unless otherwise specifically identified and set out in the schedule, the original work item price shall include all the cost and expenses of all examinations and tests required to be performed by the Contractor Medical Service

1.2.1.2 When the Government provides medical treatment or transportation of Contractor personnel to a selected civilian facility, the Contractor shall ensure that the Government is reimbursed for any costs associated with such treatment or transportation (DFARS 252.225-7040 (c)(2)(ii). Contractors shall be responsible for all other support, including routine medical and dental care, required for its personnel engaged in the designated operational area under this contract.

1.22 Environmental Compliance: The Contractor shall ensure that all of its operations and activities conform to U.S. Army and Joint Base Pearl Harbor-Hickam (JBPH-H) environmental policy requirements. The Contractor shall ensure that all contract personnel have received appropriate levels of training in the handling, use, storage, and disposal of hazardous material. In addition, the Contractor shall ensure that all Contractor-controlled activities on JBPH-H are conducted in accordance with the installation’s Spill Prevention and Response Plan, Solid Waste Policy, and applicable State of Hawaiʻi environmental laws/standards.

If contract requires the use of hazardous materials/substances, the Contractor shall, prior to mobilization, inform the Contracting Officer (KO)/Contracting Officer Representative (COR) of the types and amount of hazardous materials needed to be brought onto the installation in order to fulfill their contractual requirements. Contractor shall also provide the Safety Data Sheets, storage requirements and proposed storage locations for the hazardous material. The KO/COR shall provide a copy of this information to the office designated for compliance oversight.

Prior to contract completion, the Contractor shall clean up, remove, and dispose of all hazardous materials and waste generated during the performance of the required work. Any hazardous substance spills must be reported to the 545th Harbor Master Division and JBPH-H Fire Department.

1.23 Required Training

1.23.1 Anti-Terrorism (AT) Level I Training

All Contractor employees, including subcontractor employees who are employed under the contract, shall complete AT Level I Training within five (5) working days after contract start date or effective date of incorporation of this requirement into the contract, whichever applies, or 10 calendar days after employment of new personnel.

Contractor personnel travelling overseas shall complete area of responsibility (AOR) specific AT awareness training for U.S. based Contractor employees and associated subcontractor employees. The Contractor shall submit certificates of completion for each affected Contractor employee and subcontractor employee to the COR within three (3) working days after completion of this training by all employees and subcontractor personnel (Deliverable #1). AT Level I awareness training is available at https://jkodirect.jten.mil. Contractor personnel shall complete refresher training every twelve (12) months except AOR specific AT Level I training which shall be completed as required by local AT policies

If training cannot be conducted on the website, the Contractor shall coordinate with the COR who will contact the local AT Officer at their assigned location for classroom training. Contractor personnel completing training in the classroom will receive a certificate or the training attendance roster signed by the AT Officer. Verification of the training shall be provided to the COR within three (3) working days after completion of the training).

1.23.2 OPSEC Training: All Contractor employees, including subcontractors, shall complete Level I OPSEC training within 5 working days of employment under this contract. Verification of the training shall be provided to the COR within three (3) working days after completion of the training. OPSEC Level I training is available at http://www.cdse.edu/catalog/elearning/GS130.html. Contractor personnel must complete refresher training every 12 months. Verification of the training shall be provided to the COR within three (3) working days after completion of the training (Deliverable #2).

If training cannot be conducted on the website, the Contractor shall coordinate with the COR, who will contact the local OPSEC Officer at their assigned location for classroom training. Contractor personnel completing training in the classroom will receive a certificate or the training attendance roster signed by the OPSEC Officer. Verification of the training shall be provided to the COR within three (3) working days after completion of the training.

1.23.3 i-WATCH Training: The Contractor and all associated subcontractors shall brief all employees on the local iWATCH program (training standards provided by the requiring activity ATO). This locally developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within five (5) working days after the contract is awarded and within 10 calendar days after new employees commence contract performance, with the results reported to the COR within three (3) working days after new employees commence contract performance.

Verification of the training shall be provided to the COR within three (3) working days after completion of the training (Deliverable #3). Training slides can be found on the Army OneSource we site:

http://www.myarmyonesource.com/familyprogramsandservices/iwatchprogram/default.aspx

1.23.4 - 1.23.5 RESERVED

1.23.6 Sexual Assault and Sexual Harassment Policy: The Department of Defense has adopted a policy to prevent sexual assault and sexual harassment.

1.23.6.1 Definitions:

1.23.6.1.1 Sexual Assault: A crime defined as intentional sexual contact, characterized by use of force, physical threat or abuse of authority or when the victim does not or cannot consent. Sexual assault includes rape, nonconsensual sodomy (oral or anal sex), indecent assault (unwanted, inappropriate sexual contact or fondling), or attempts to commit these acts. Sexual assault can occur without regard to gender or spousal relationship or age of victim. “Consent” will not be deemed or construed to mean the failure by the victim to offer physical resistance. Consent is not given when a person uses force, threat of force, or coercion or when the victim is asleep, incapacitated, or unconscious.

1.23.6.1.2 Sexual Harassment: Gender discrimination that involves unwelcomed sexual advances, requests for sexual favors and other verbal or physical conduct of a sexual nature between the same or opposite sex genders when such conduct has the purpose or effect of unreasonably interfering with an individual’s work performance or creates an intimidating, hostile, or offensive working environment. Categories of sexual harassment are:

1.23.6.1.2.1: Verbal – Examples include telling sexual jokes; using sexually explicit profanity, threats, sexually oriented cadences, or sexual comments; whistling in a sexually suggestive manner; and describing certain attributes of one’s physical appearance in a sexual manner.

1.23.6.1.2.2: Nonverbal – Examples include staring at someone, blowing kisses, winking, or licking one’s lips in a suggestive manner. The term may also include printed material (for example, displaying sexually oriented pictures or cartoons); using sexually oriented screen savers on one’s computer; or sending sexually oriented notes, letters, faxes or email.

1.23.6.1.2.3: Physical Contact – Examples include touching, patting, pinching, bumping, grabbing, cornering, or blocking a passageway; kissing; and providing unsolicited back or neck rubs.

1.23.6.2: Policy:

1.23.6.4 Sexual Harassment Policy Compliance: The Contractor shall ensure all employees comply with the Sexual Assault and Sexual Harassment Policy outlined below. The Contractor shall certify that all employees performing work under this contract have been fully trained per the requirements below. The COR shall be provided with the following information at a minimum: employee’s name, civil identification number and date trained. Proof of Sexual Harassment Policy Compliance is due within five (5) days after initial contract award and within 48 hours after arrival of new personnel on site (Deliverable #4). Each employee shall be in compliance with the training requirement and shall be reported to the Contracting Officer Representative prior to the employee being allowed access to the worksite.

1.23.6.5 The Contractor shall conduct training of all employees annually to prevent sexual assault and sexual harassment. This training must, at a minimum, ensure that all the Contractor employees understand the definitions and policy outlined below. Contractors and contractor employees in the U.S. Army Pacific Command (USARPAC) Area of Responsibility (AOR) shall not –

1.24 - 1.28 RESERVED

PART 2 - DEFINITIONS & ACRONYMS / INITIALISMS

2. DEFINITIONS & ACRONYMS / INITIALISMS

2.1 DEFINITIONS

BN MAINTENANCE OFFICER - A representative from the command responsible for the vessels, to perform surveillance and to act as liaison to the contractor.

CALL ORDER - Stand-alone, legally binding contracts between government and vendor. A sample call order number is 0115 (this four-digit number would follow the CONTRACT number, e.g., W912CN- 15A-0006-0015).

CHIEF ENGINEER OFFICER - A representative from the specific vessel responsible for the individual vessel, to perform surveillance and to act as liaison to the BN Maintenance Officer.

CONTRACTOR - A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

CONTRACTING OFFICER (KO) - A person with the authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the Government. Note:

The only individual who can legally bind the Government.

CONTRACTING OFFICER'S REPRESENTATIVE (COR) - An employee of the U.S. Government appointed by the Contracting Officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

DASH ITEM: A dash item is an item of work and/or material which is necessary to complete an original item of work in the contract or delivery/task order. Contractor will receive profit on both subcontractor labor and G&A markup on subcontractor labor. Although contractor will receive G&A markup on materials, no profit is allowed on materials of a dash item. Profit and G&A Rate must be separately shown in Section J. Failure to indicate a profit figure or G&A Rate in Section J can result in denial of:

(1) G&A and profit on subcontractor labor; and, (2) G&A markup for materials on dash items.

DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

DEFINITE ITEM: Known work that shall be diligently prosecuted upon issuance of task order.

DELIVERABLE. Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

EXCHANGE: Replacement of an item with a like item.

GOVERNMENT ACCOUNT MANAGER - This person has rights to accept invoices in WAWF, and can give credentials to others to do the same

FURNISH: The Contractor shall provide what is needed at the Contractor's expense, as part of the work item price. All parts shall be new, unless the specification allows for a reconditioned item.

HAND TOOL CLEAN: Clean surfaces to SSPC-SP2, Swedish St 2 standard, free of all loose paint, scale, rust and debris, utilizing hand tools.

INCLUDES: Includes, but not limited to:

INDEFINITE ITEM: Work to be accomplished only upon the written approval of the Contracting Officer. Activation of an indefinite item does not entitle the Contractor to an extension of the performance period.

INSPECTION POINTS: Within the contract there are mandatory points where the Contracting Officer’s Representative (COR) is to inspect the Contractor’s work in order to signify Government acceptance of the work. These inspection points are indicated within the specifications with words such as “in the presence of the Contracting Officer’s Representative (COR)” or “test in the presence of the Contracting Officer’s Representative (COR).” A minimum of two hours written notice shall be given by the Contractor for these inspection points, and all inspections must be scheduled within the Contracting Officer’s Representative (COR)’s normal workday. Any inspection requested at the end of the work day will be performed at the commencement of the next work day.

KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluating factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

NEW ITEM: A new item is an item of work and/or material which is found during the period of performance and is required in order to deliver a seaworthy vessel. Contractor will receive G&A on subcontractor labor and material. Contractor will receive profit on subcontractor labor, subcontractor G&A, material and G&A on material. Profit and G&A Rate must be separately shown in Section J.

Failure to indicate a profit figure or G&A Rate in Section J can result in denial of: (1) G&A and profit on subcontractor labor; and, (2) G&A markup for materials and subcontractor labor.

OVERHAUL: The Contractor shall remove an item from its installed location to a work area suitable for type of equipment, disassemble all parts, clean all parts, inspect and/or test all parts, and submit a condition report on all parts. Upon completion of Government determination of which parts can be reused and which parts must be renewed, the Contractor shall recondition those parts designated for reuse, replace parts designated for renewal with new parts, reassemble items, reinstall items, and test items. New parts required by the Government not enumerated in the technical specifications shall be furnished by the Contractor, and the Contractor will be compensated in accordance with subparagraph C.0.2.27.3 entitled: "Approval of Additional Replacement Parts and Materials."

PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

POWER TOOL CLEAN: Clean surfaces to SSPC-SP3, Swedish St 3 standard, free of all loose paint, scale, rust and debris, utilizing power tools or to SSPC-SP11 to “near white” surfaces when indicated in the specification.

QUALITY ASSURANCE. The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

QUALITY ASSURANCE SURVEILLANCE PLAN (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of Contractor performance.

QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

QUALIFIED MANUFACTURER’S REPAIR TECHNICIAN: A person who has received training and has a current certification by the manufacturer enabling the individual to properly inspect, troubleshoot, diagnose, adjust and perform repairs to that specific equipment/component.

RECONDITION: The elimination and/or correction of those defects and/or conditions that, determined by the item manufacturer's standards, would adversely affect a used item in its continued service, by work on that item, resulting in a serviceable finished item with all tolerances and dimensions remaining within the manufacturers allowable wear limits and/or variance for the intended service.

REINSTALL: To place back in designed position, remount and reconnect.

RENEW: Put in a new item, unit or part as required by technical specifications. The Contractor will be compensated at cost for the item, unit or part to be renewed.

REPAIR: To restore an item or system to a sound condition by the performance of work on that item or system. REPLACE: To supply an equivalent new item for the item to be replaced, to furnish and install.

RUST: All forms of ferric oxide. All terminology in this specification indicating the removal of rust shall be defined as requiring total removal of all visible and accessible rust, including loose and hard scale, to bare metal. Additionally, unless a method is specified, the Contractor shall determine and use any method of rust removal necessary to accomplish the task, and all bare metal surfaces exposed by the de-rusting process shall be properly and adequately primed.

SSPC: Steel Structures Painting Council standards.

SUBCONTRACTOR. One that enters into a contract with a prime contractor. The Government does not have privacy of contract with the subcontractor.

RANDOM SAMPLING: A sampling method in which each service output in a lot has an equal chance of being selected.

SAMPLE: A sample consists of one or more service outputs drawn from a lot. The number of outputs in the sample is the sample size.

SURFACE CLEANLINESS: SSPC standards for surface cleanliness is the condition of the substrate after cleaning has removed partial or total residues of chloride, soluble ferrous salts and sulfate contamination. The acceptable standard of cleanliness in this specification is SC-2.

SURFACE PROFILE: All abrasive blasted, water jet cleaned, power tool cleaned or hand tool cleaned surfaces shall have a measurable surface profile upon completion of cleaning. The actual measured profile readings shall be included in the Test and Inspection sheets for the surface areas cleaned and painted. The surface profile shall meet the SSPC standards for surface profile before application of primer paints.

FULLY MISSION CAPABLE. Systems and equipment that are safe and have all mission-essential subsystems installed and operating as designated by applicable Army regulation. An FMC vehicle or system has no faults that are listed in the “not fully mission capable ready if” columns of the TM/ETM XX–10 and XX–20 series PMCS tables and AR 385–10 provisions that apply to the vehicle and/or system or its sub-system required by AR 700–138. The terms ready and/or available and FMC refer to the same status: equipment is on hand and able to perform its combat missions. MODIFICATION: A change to the call order (to add or decrease funding, change POCs, change requirement, etc.)

NOT MISSION CAPABLE. A materiel condition indicating that equipment cannot perform any one of its combat missions. An NMC vehicle or system has faults that are listed in the “not fully mission capable ready if” columns of the TM/ETM XX–10 and XX–20 series PMCS tables and AR 385–10 provisions that apply to the vehicle and/or system or its sub- system required by AR 700–138.

EMERGENCY REPAIR. Any repair required that renders the vessel not mission capable.

ROUTINE REPAIR. Any repair required that is a fault but does not render the vessel not mission capable. SCHEDULED MAINTENANCE. Checks and services performed by unit maintenance personnel with assistance from the operation and/or crew per the TM and/or ETM XX–10 and XX– 20 series PMCS tables and lube orders. Some equipment also requires scheduled PMCS tasks to be performed by field personnel per the equipment TM and/or ETM XX–30 series. All equipment faults are corrected or, if above the unit maintenance level authorization (per MAC) to correct, job ordered to field maintenance. Deferred maintenance is completed during the scheduled service.

Upon conclusion of the service, equipment should meet the TM and/or ETM XX–10 and XX–20 series maintenance standards.

OVERHAUL: The Contractor shall remove an item from its installed location to a work area suitable for type of equipment.

(a) The Contractor shall disassemble all parts, clean all parts, inspect and/or test all parts, and submit a condition report on all parts.

(b) Upon completion of Government determination of which parts can be reused and which parts must be renewed, the Contractor shall recondition those parts designated for reuse, replace parts designated for renewal with new parts, reassemble items, reinstall items, and test items.

QUALIFIED MANUFACTURER’S REPAIR TECHNICIAN: A person who has received training and has a current certification by the manufacturer enabling the individual to properly inspect, troubleshoot, diagnose, adjust and perform repairs to that specific equipment/component.

RECONDITION: The elimination and/or correction of those defects and/or conditions that, determined by the item manufacturer's standards, would adversely affect a used item in its continued service, by work on that item, resulting in a serviceable finished item with all tolerances and dimensions remaining within the manufacturers allowable wear limits and/or variance for the intended service.

REINSTALL: To place back in designed position, remount and reconnect.

RENEW: Put in a new item, unit or part as required by technical specifications. The Contractor will be compensated at cost for the item, unit or part to be renewed.

REPAIR: To restore an item or system to a sound condition by the performance of work on that item or system. REPLACE: To supply an equivalent new item for the item to be replaced, to furnish and install.

New parts required by the Government not enumerated in the technical specifications shall be furnished by the Contractor, and the Contractor will be compensated. Only the Contracting Officer will approve additional replacement parts and materials. Upon approval of the Contracting Officer authorizing the additional replacement part and/or material, a modification to the contract will be processed.

WORKDAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.2 ACRONYMS & INITIALISMS

ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement AR Army Regulation CCE Contracting Center of Excellence

CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTR Contracting Officer's Technical Representative COTS Commercial-Off-the-Shelf DA Department of the Army DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement

GAM Government Account Manager DMDC Defense Manpower Data Center

DOD Department of Defense FAR Federal Acquisition Regulation HIPAA Health Insurance Portability and Accountability Act of 1996

KO Contracting Officer OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs PIPO Phase In/Phase Out

POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program TE Technical Exhibit

WAWF Wide Area Work Flow

PART 3

GOVERNMENT PROPERTY (GP) AND SERVICES

3. GOVERNMENT PROPERTY AND SERVICES:

3.1 Services: none

3.2 Facilities: The Contractor shall use reasonable care to avoid damaging existing buildings, equipment, and vegetation on the Government installation

3.2.1 Alterations: The Contractor shall not change or alter the configuration of the vessel(s) in any way, i.e., cutting off masts, antennas, or lights, etc., in order to get the vessel(s) to the place of performance. Unbolting is acceptable. Replacement of items which are unbolted must be accomplished within the stated performance period. Additional time will not be granted for the replacement of items.

3.2.2 Damages: The Contractor shall be responsible for all damages to the vessel(s), its equipment and machinery incurred while the vessel(s) is under the Contractor's care, due to the Contractor's, his employees' or his subcontractor's negligence or failure to act to protect the vessel(s).

3.3 Utilities: The Government will provide access to installation utilities as needed for the contractor to perform the required work. The Contractor shall instruct employees in utilities conservation practices. The Contractor shall operate under conditions that preclude the waste of utilities, which include turning off the water faucets or valves, light switches, etc. after using the required amount to accomplish tasks requiring the use of the utilities.

3.4 - 3.8: RESERVED

PART 4

CONTRACTOR-FURNISHED ITEMS AND SERVICES

CONTRACTOR FURNISHED PROPERTY AND SERVICES:

4.1 General: The Contractor shall furnish all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision and other items necessary to perform services as described in the PWS and associated contract documents, except for items specified in Part 3 Government Property and Services.

4.2 Secret Facility Clearance – N/A

4.3 Materials: The contractor shall provide employees all materials, e.g., personal protective equipment (PPE) and supplies needed in the performance of this contract. The Contractor may request a letter of authorization from the Contracting Officer to utilize Government supply sources such as Government Services Administration (GSA), UNICOR, etc.

The Contractor shall provide any other required items in sufficient quantities serviced at proper intervals to prevent unsanitary conditions. The Contractor shall obey all local laws regarding proper disposal of debris.