B08. Solicitation - SPRBL127QA001.pdf

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

Section A - Solicitation/Contract Form

Spot-Buy SUPPORT,ELECTRIC MOTORInstrument Name:

Product Service Code : 6105

Product Service Code (PSC): 6105

NAICS CODE: 333618

Size Standard: 1,500

"NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM applies to this solicitation. See https://legacy.sba.gov/document/support-table-size-standards for the corresponding small business size standard."

Approved Source(s):

GENERAL DYNAMICS MOTION CONTROLL LLC: CAGE 10112

NSN: 6105-01-668-7470

P/N: 11375B-110E-058

QTY: 10

Part I: INSTRUCTIONS FOR SUUPLIERS AND EVALUATIONS OF OFFERS

1. This solicitation, called DLA Land at Aberdeen's Master Solicitation for Acquisitions Using Simplified Acquisition Procedures (herein referred to as the Aberdeen Master Solicitation), is used by the DLA Land at Aberdeen contracting office to issue requests for quotations (RFQ) and awards of purchase orders for acquisitions up to the simplified acquisition threshold (SAT).

Suppliers are required to read this Aberdeen Master Solicitation and all applicable documents and comply with terms and conditions established. Updated Aberdeen Master Solicitations will be identified by date and revision number.

2. The Aberdeen Master Solicitation contains multiple parts. Part I instructs suppliers in the submission of quotations and award evaluation. Part II contains the mandatory provisions and clauses, conditional provisions and clauses, and procurement notes that apply to the RFQs and purchase orders. Provisions, clauses, and procurement notes are incorporated by reference.

They have the same force and effect as the full text. NOTE: In some cases, clauses incorporated in Part II will appear in solicitation and award documents. When a conflict arises, the provisions and clauses in the main solicitation or award document will take precedence over the version listed in Part II of the Aberdeen Master Solicitation.

3. Instructions for Offerors

a) : Contractor shall submit the solicitation electronically to the SUBMITTING QUOTATIONS point of contact (POC) identified on the solicitation document. Quotes via any other method will not be considered for award.

SPRBL127QA001

b) : The time for receipt of quotations will be on the solicitation and RETURN DATE AND TIME the Government Point of Entry. In case of a conflict, the later of the two times will be used.

c) : Quotations received after the return date/time for automated LATE QUOTATIONS solicitations may be considered until the evaluation process begins. Once the evaluation process begins, late quotations will only be considered if the contracting officer determines that considering the late quotation is in the best interest of the Government and would not unduly delay the award.

d) : Suppliers may revise quotations up until the time the solicitation QUOTATION REVISIONS is awarded by contacting the point of contact on the solicitation document.

e) : Suppliers may withdraw quotations until the time the QUOTATION WITHDRAWAL solicitation is awarded by contacting the point of contact on the solicitation document.

f) : Solicitations with an estimated dollar value between the micro-SET-ASIDE SOLICITATIONS purchase threshold and the SAT are set-aside for small business when cited in the solicitation.

g) : This procurement MAY include First SOLICITATIONS WITH FAT REQUIREMENTS Article Testing (FAT) requirements. FAT waivers, requirements, descriptions, and evaluations are discussed in Exhibit A of this solicitation.

h) QUANTITY REQUIREMENTS: Quotation must be submitted on the total quantity of each item.

i) : The Government required delivery will be stated in days DELIVERY REQUIREMENTS after date of order (ADO). If the supplier is not able to meet the delivery requirement, the supplier must submit their delivery timeframe on the solicitation document in section B in number of days ADO. This includes time to deliver production quantity, required testing, and government inspection and acceptance. If a FAT is required, the supplier must also comply with the FAT delivery requirement and if unable to comply, must submit their delivery timeframe on quote page in number of days ADO. This includes time to deliver the completed test report (if contractor FAT).

j) : Surplus offers will not be considered.SURPLUS

k) Questions regarding the solicitation should be referred to the POC on the solicitation document or the POC identified in the Government Point of Entry (https://sam.gov) .

4. Evaluation of Quotations

a) Award will be made to the offeror(s) whose quote(s) conforms to the solicitation requirements and represents the best value to the Government. Past performance, offered delivery, and price will be evaluated when making a comparative assessment of quotes. An award may be made to other than the lowest priced, technically acceptable, responsible offeror(s).

b) ALTERNATE OFFERS: Alternate offers will not be considered for award. Alternate offers may be submitted to the POC identified in the solicitation for evaluation for future procurements.

c) NOTICE OF AWARD: Purchase orders are based on a submitted quotation. Suppliers are requested to notify the administrative contracting officer, within 14 days after receiving the notice of award, when they will not perform in accordance with a purchase order. Failure to provide prompt notice will adversely affect your past performance evaluation if the purchase order is later cancelled at other than the Government's request.

Part II: PROVISIONS, CLAUSES, AND PROCUREMENT NOTES, TECHNICAL AND QUALITY

MASTER LIST OF REQUIREMENTS

The following websites are provided to suppliers to obtain the full text of the FAR, DFARS, and DLAD provisions, clauses, and Procurement Notes listed below: https://www.acquisition.gov , http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html, http://www.dla.mil/hq/acquisition /offers/DLAD.aspx and http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx .

All provisions, clauses, and procurement notes are incorporated herein by reference with the same force and effect as if set forth in full text, and made a part of the solicitation/order as applicable. The submission of a quotation in response to a RFQ that references this document constitutes the supplier's compliance with the representations and certifications and acceptance of the individual clauses, provisions, and procurement notes incorporated by reference herein.

Certain representations and certifications may be required as part of a quotation. Please complete these representations and certifications in the solicitation document. Please review additional representations and certifications within the System for Award Management. Suppliers are reminded that all provisions incorporated herein by reference remain binding in their entirety.

Any penalties for misrepresentation contained in the reference clauses and provisions apply.

SUBPART A Mandatory FAR, DFARS, and DLAD Provisions and Clauses

Please refer to Part II, Subpart A of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of mandatory FAR, DFARS, and DLAD Provisions and Clauses.

The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.

mil/HQ/Acquisition/Offers/eProcurement.aspx . Suppliers shall comply with the DLA Master Solicitation for Automated Simplified Acquisitions in effect at the time of award.

SUBPART B Conditional FAR, DFARS, and DLAD Provisions and Clauses

Please refer to Part II, Subpart B of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of conditional FAR, DFARS, and DLAD Provisions and Clauses.

The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.

mil/HQ/Acquisition/Offers/eProcurement.aspx . Suppliers shall comply with the DLA Master Solicitation for Automated Simplified Acquisitions in effect at the time of award.

SUBPART C Procurement Notes

Please refer to Part II, Subpart C of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of mandatory FAR, DFARS, and DLAD Provisions and Clauses.

The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.

mil/HQ/Acquisition/Offers/eProcurement.aspx . Suppliers shall comply with the DLA Master Solicitation for Automated Simplified Acquisitions in effect at the time of award.

SUBPART D- Technical and Quality Requirements

Please refer to Part II, Subpart C of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of mandatory FAR, DFARS, DLAD Provisions, and Clauses AND Technical and Quality Master List of Requirements. The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers /eProcurement.aspx

*** END OF NARRATIVE 1 ***

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quanti ty

Unit Unit Price Amount

0001 SUPPORT,ELECTRIC MOTOR

National Stock Number:

6105016687470

Manufacturer's Part Number:

11375B-110E-058

Manufacturer's CAGE: 10112

Product Service Code: 6105

North American Industry Classification System (NAICS):

333618

Pricing Arrangement: Firm Fixed Price

10 Each

Section C - Description/Specifications/Statement of Work

Requirements Solicitation for Purchase Order of NSN 6105-01-668-7470.

Section D - Packaging and Marking

PACKAGING: Packaging shall be in accordance with, (IAW): MIL-STD-2073-1E and AR 700-15.

MARKING: Marking shall be IAW MIL-STD-130N, MIL-STD-129R, and source drawings.

WOOD PACKAGING: Wood Packaging Materials in compliance with ISPM 15, Regulation of Wood Packaging Materials in International Trade, is applicable.

GENERAL:

Level of Preservation (LOP): Military Level of Pack (LPK): O Quantity Unit Pack (QUP): 001.

DS7029 / DS0733

NSN: 6105-01-668-7470

Protection Required (Prot Req): Military Packaging Reference (PKG-REF): MIL-STD-2073-1E Level of Packing (LPK): O Quantity per Unit Pack (QUP): 1 Intermediate Container Quantity (ICQ): - Packaging Requirement Codes (Pkg Reqmt Codes): ZZZ0

J.I. (MP): 41

J.II. (CD): 1

J.III. (PM): 00

J.IV. (WM): GB

J.V. (CD): NA

J.VI. (CT): D

J.VII. (UC): BS

J.VIIa. (IC): ED

J.IX. (PK): -

J.X. (SM): 00

Special Markings: NA

*** END OF NARRATIVE 1 ***

Section E - Inspection and Acceptance

E06 Inspection and Acceptance at Source (JUN 2018)

Inspection and acceptance are at source. The place of acceptance is the location where the Government conducts the last inspection before shipment, unless the contractor indicated a different physical location for acceptance below.

The contractor shall indicate the location where supplies will be inspected, if different from the production location:

Commercial and Government Entity (CAGE) code:________________________________ Address:

Applicable to contract line item numbers(s) (CLIN(s)):_______________________

The contractor shall indicate the location where packaging will be inspected, if different from the production location:

( ) Same as for supplies OR

CAGE code:

Address:

Applicable to CLIN(s): ______________________________________________________

The contractor shall indicate the location where supplies will be accepted, if different from the inspection location:

Commercial and Government Entity (CAGE) code:________________________________ Address:

Applicable to contract line item numbers(s) (CLIN(s)):_______________________

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

The inspection location for supplies is the awardee's CAGE CODE address unless otherwise indicated in the contract/purchase order. Inspection will be conducted by the Government's Quality Assurance Representative (QAR). Inspection of packaging, if required, may be conducted at the packaging location cited in the award.

SECTION I (All Awards)

a. Objective evidence of conformance with all contract quality assurance requirements must be present at the inspection location. When requested, manufacturer drawings and technical information and complete records of all inspection work performed to verify that the supplies meet technical requirements shall be provided. If required to determine conformity with contract requirements, subcontractor records shall also be provided.

b. Objective evidence to establish the location of the actual manufacturing source may also requested to confirm the end product country of origin and/or business size of the manufacturer.

c. If the supplier is not the manufacturer of the supplies, objective evidence must be furnished to establish the supplies were produced by an approved manufacturer or approved source.

d. The QAR is required to notify the Post Award Administrator (PCO), if at time of Government Source Inspection (GSI), the QAR is denied access to the offeror's facility. If supplies being provided are described only by manufacturer's name/CAGE Code and part number, objective evidence must be furnished to establish that the supplies were manufactured under the direction of or under agreement with the CAGE Code of the part number offered.

e. The QAR may require additional examinations and tests to determine:

i. Completeness of item

ii. Material is new and unused

iii. Absence of rust

iv. Contamination, or deterioration

v. Correct identification/item marking 824 vi. Correct packaging

vii. Absence of any damage

viii. Compliance with preparation for delivery

(End of TQ Requirement)

*** END OF NARRATIVE 1 ***

Section F - Deliveries or Performance

GOVERNMENT'S DESIRED DELIVERY

CLIN ____ ____________0001

____ _______ EA ___ ______ days after receipt of order.10 EA 385

OFFEROR'S PROPOSED DELIVERY

CLIN ______ __________0001

____________ ____________ days after receipt of order and ___________ each every EA ___________ days thereafter until completion.

*** END OF NARRATIVE 1 ***

0001 From date of lead time event to delivery 55 Weeks

Date of Award DoDAAC: SW3122

10 EachQuantity

Address and POC Ship To DoDAAC: SW3122 CountryCode: USA

DLA DISTRIBUTION JACKSONVILLE

BLDG 175 SWAN ROAD, RAYMOND MORGAN 904-661-5135 JACKSONVILLE, FL

32212-0103 UNITED STATES

Special Handling/Notes FoB Details

Party to Pay Transportation Cost: Contractor

Point Type: Destination

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.242-17 Government Delay of Work. 1984-04

52.247-34 F.o.b. Destination. 1991-01

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12

DFARS Clauses Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

252.232-7006 Wide Area WorkFlow Payment Instructions.

2023-01

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause-

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web- Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving (Combo)

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC TBD Issue By DoDAAC SPRBL1 Admin DoDAAC TBD Inspect By DoDAAC TBD Ship To Code SW3122 Ship From Code TBD Mark For Code N/A Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) N/A Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A (*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

TBD

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

2017-01

52.204-13 System for Award Management- Maintenance. (Deviation 2026- O0038)

2026-02

52.204-19 Incorporation by Reference of Representations and Certifications.

2014-12

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations.

(Deviation 2026-O0038)

2026-02

52.211-5 Material Requirements.

(Deviation 2026-O0038)

2026-02

52.211-15 Defense Priority and Allocation Requirements.

2008-04

52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038)

2026-02

52.223-23 Sustainable Products. (Deviation 2026-O0038)

2026-02

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving.

2024-05

52.232-1 Payments. 1984-04

52.232-8 Discounts for Prompt Payment. 2002-02

52.232-11 Extras. 1984-04

52.232-25 Prompt Payment. 2017-01

52.232-33 Payment by Electronic Funds Transfer-System for Award Management.

2018-10

52.232-39 Unenforceability of Unauthorized Obligations.

2013-06

52.232-40 Providing Accelerated Payments to Small Business Subcontractors.

2023-03

52.233-3 Protest after Award. (Deviation 2026-O0038)

2026-02

52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026- O0038)

2026-02

52.240-91 Security Prohibitions and Exclusions. (Deviation 2026- O0038)

2026-02

52.243-1 Changes-Fixed-Price. (Deviation 2026-O0038)

2026-02

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-04

52.249-1 Termination for Convenience of the Government (Fixed-Price) (Short Form).

1984-04

DFARS Clauses Incorporated by Reference

Date

Alternate Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

2011-09

252.203-7002 Requirement to Inform Employees of Whistleblower Rights.

2022-12

252.204-7003 Control of Government Personnel Work Product.

1992-04

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

2024-05

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

2023-01

252.223-7008 Prohibition of Hexavalent Chromium.

2023-01

252.225-7048 Export-Controlled Items. 2013-06

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

2023-01

252.232-7010 Levies on Contract Payments. 2006-12

252.243-7001 Pricing of Contract Modifications. 1991-12

252.244-7001 Contractor Purchasing System Administration. (Alternate I)

2025-01 Alternate I 2025-01

252.246-7007 Contractor Counterfeit Electronic Part Detection and Avoidance System.

2023-01

252.246-7008 Sources of Electronic Parts. 2023-01

252.247-7023 Transportation of Supplies by Sea.

2024-10

FAR Clauses Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

52.252-2 Clauses Incorporated by Reference.

1998-02

Clauses Incorporated By Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/far-overhaul https://www.acq.osd.mil/dpap/dars /dfars_far_overhaul_class_deviations.html https://www.dla.mil/Acquisition/Policy-and-Directives /#98024[Insert one or more Internet addresses]

DFARS Clauses Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

252.211-7003 Item Unique Identification and Valuation.

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

N/A ____

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

N/A ____

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary;

and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number);

and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number;

DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.

S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ____, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

Section K - Representations, Certification, & Other Statements

DFARS 252.204-7016 Covered Defense Telecommunications Equipment or Services Representation (DEC 2019)

(a) Definitions. As used in this provision, covered defense telecommunications equipment or services has the meaning provided in the clause "https://www.acq.osd.mil/dpap/dars/dfars/html /current/252204.htm#252.204-7018", Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) ("https://www.sam.gov/") for entities excluded from receiving federal awards for covered defense telecommunications equipment or services.

(c) Representation. The Offeror represents that it [ ] does, [ ] does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(End of Text)

DFARS 252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services Representation (Dec 2019)

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at "https://www.acq.osd.mil/dpap/dars/dfars/html/current/252204.

htm#252.204-7016", Covered Defense Telecommunications Equipment or Services Representation, that it does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(a) Definitions. Covered defense telecommunications equipment or services, covered mission, critical technology, and substantial or essential component, as used in this provision, have the meanings given in the "https://www.acq.osd.mil/dpap/dars/dfars/html/current/252204.htm#252.204- 7018" clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) Prohibition. Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub.

L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at "https://www.sam.gov/" for entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) Representation. If in its annual representations and certifications in SAM the Offeror has represented in paragraph (c) of the provision at "https://www.acq.osd.mil/dpap/dars/dfars/html /current/252204.htm#252.204-7016", Covered Defense Telecommunications Equipment or Services Representation, that it does provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it [ ] will [ ] will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) Disclosures. If the Offeror has represented in paragraph (d) of this provision that it will provide covered defense telecommunications equipment or services, the Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

*** END OF NARRATIVE 1 ***

FAR Provisions Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026- O0038)

2026-02

DFARS Provisions Incorporated by Reference

Date

Alternate Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials.

2022-09

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.

2016-10

252.225-7055 Representation Regarding Business Operations with the Maduro Regime.

2022-05

DFARS Provisions Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation.

2021-05

PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS

EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."

(a) Definitions. "Covered defense telecommunications equipment or services," "covered mission," "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) Prohibition. Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at https://www.sam.gov for entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) Representation. If in its annual representations and certifications in SAM the Offeror has represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it [ ] will [ ] will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) Disclosures. If the Offeror has represented in paragraph (d) of this provision that it "will provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

(End of provision)

Section L - Instructions, Conditions, & Notices to Offerors or Quoters

Refer to Narrative A, Number 3 Instructions for Offerors

*** END OF NARRATIVE 1 ***

FAR Provisions Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements- Representation.

2017-01

52.204-7 System for Award Management- Registration. (Deviation 2026- O0038)

2026-02

DFARS Provisions Incorporated by Reference

Date

Alternate Deviation

Variation Effective Date

252.204-7024 Notice on the Use of the Supplier Performance Risk System.

2023-03

252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors.

FAR Provisions Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

52.207-4 Economic…