B08_Attachment_-_Salient_Characteristics.docx
DOCX document 25 KB Posted
- Attached to
- CHURN SAMPLE SPLITTER Federal contract opportunity
- Solicitation number
- 140G0123Q0017
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140G0123Q0017.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics The Hydrologic Instrumentation Facility (HIF) needs to procure 8-liter churn splitters to support sediment data collection activities. The units will be used at rivers and streams all over the country as needs arise.
8-Liter Teflon Churn Splitter
The Hydrologic Instrumentation Facility (HIF) needs to procure Teflon 8 liter Churn Splitter needed to re-stock the HIF warehouse. The units are used contain sampled water for quality analysis
Requirements: Churn Splitter, 8L, Teflon
Parts are manufactured using polytetrafluoroethylene (PTFE) except for the carry handle which is constructed using high density polyethylene (HDPE).
Bucket dimensions are 11.25 inches tall by 8.8125 inches outer diameter and 8.3125 inches inside diameter.
Bucket shall have an integral agitator alignment rib installed as part of the bucket The lid has a 3 inch filler hole and has a snap on filler cap.
Top shall include a center hole of 1 inch for agitator handle to pass through Valve shall be push-pull type spigot Parts shall be interchangeable with all of US SS-4 churn splitters
File details come from the government source that posted it. Updated .