B08_ATCH_3_0024001_Top_Cap.pdf

PDF 94 KB Posted

Attached to
ORIFICE FITTING ASSEMBLY IAW ATTACHMENTS
Solicitation number
140G0123Q0216
Issued by

About this file

Written by GovTribe AI ·

This document contains a technical drawing for an orifice fitting assembly. The drawing provides dimensions and tolerances for a threaded, galvanized iron pipe cap that is 2.0 inches in diameter. Key details include a drill through one side only that is 0.187 inches in diameter and a scale of 1:1.

The related federal contract opportunity is solicitation number 140G0123Q0216 from the Department of the Interior US Geological Survey Office of Acquisitions and Grants for orifice fitting assemblies to meet the specifications provided in the attachments. The solicitation seeks to procure these products but provides no further information on pricing, response dates, or other procurement details.

View the file

Other files

File Type Posted
B08_ATCH_5_bubble_orifice_fitting-Aug_2023_0002.pdf PDF
Sol_140G0123Q0216_Amd_0002.pdf PDF
Sol_140G0123Q0216_Amd_0001.pdf PDF
B08_ATCH_2_SOW_1202002_CSG_Top_Cap.pdf PDF
B08_ATCH_5_bubble_orifice_fitting-May_2023.pdf PDF
B08_ATCH_1_HIFW01C_Workmanship.pdf PDF
Sol_140G0123Q0216.pdf PDF
B08_ATCH_7_SOW_1210055_Orifice_Cap_Non-Corrosive.pdf PDF
B08_ATCH_6_bubble_orifice_fitting-plastic-May_2023.pdf PDF
B08_ATCH_4_SOW_1210040_Orifice_Fitting_Assembly.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

NOTES:

1. REMOVE ALL BURRS AND SHARP EDGES.

2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.

3. (.XXX) = DECIMAL EQUIVALENT.

63 [1.6] µm THIRD ANGLE PROJECTION

METRIC CONVERSION

DECIMAL [mm]

X.XX.XXX

.X X

X.X.XX

SURFACE FINISH:

ANGLES

`1/16FRACTIONS

UNLESS OTHERWISE SPECIFIED DIMENSIONS

ARE IN INCHES AND INCLUDE PLATING

DECIMAL TOLERANCE [mm] = 0.13

= 1.6 = 0.8 = 0.38

.XXX `.005

.XX `.015

.X `.030

- DO NOT SCALE THIS DRAWING -

UNITED STATES DEPARTMENT OF THE INTERIOR

GEOLOGICAL SURVEY - WATER RESOURCES DIVISION

PARTS LIST

NOTESDESCRIPTION

NO. REQ'D

APPROVALS

REVISION-DESCRIPTIONLTR. DATE

DATE

SCALE

TITLE

MATERIAL

SIZE DWG. NO. REV.

ITEM SH. QTY.

NO. SIZE DRAWING/PART NO. REQD.

DRAFTING CHECK:

DRAWN BY:

DESIGN CHECK:

DESIGN APPROVAL:

B

`1/2 ~

NIKKI DENTON

HRM / EJN

G. LOMAN

C.S. CLAYTON

TOP CAP

0024001FULL -

1-22-09 3/25/10 3/25/10 3/25/10

REVISED AND REDRAWN

1-22-09

PIPE CAP, IRON, THREADED,

GALVANIZED, 2.0 [50] DIA PIPE SIZE

REVISED AND REDRAWN

1.00 [25.4] q

Ø 3/16 (.187) DRILL

THRU ONE SIDE ONLY

File details come from the government source that posted it. Updated .