B08_ATCH_1_SALIENTS_S23026.pdf

Salient Characteristics S23026

GNSS RECEIVERS And ACCESSORIES

2 EA. GNSS Receiver:

1. Shall consist of an integrated GNSS (Global Navigation Satellite System) for land surveying and mapping applications.

2. Shall include an integrated GNSS antenna.

3. Shall include Inertial Measurement Unit (IMU) based tilt compensation for accurate stakeout and measuring points without having to precisely level the survey pole.

4. Shall not require calibration and shall be free from magnetic interference.

5. Shall have integrated Bluetooth capability with a fully sealed communications port.

6. Shall have at least 6 GB internal memory.

7. Shall be Wi-Fi capable with data encryption.

8. Shall be capable of surviving a drop onto a hard surface (such as concrete) from a height of at least 6 ft.

9. Shall have case that is rated IP67 or better.

10. Shall include a 7-pin, lemo-type 3-wire serial connector.

11. Shall employ techniques/technology to provide continuous RTK coverage in the event of temporary radio or internet connection outages.

12. Shall employ flexible signal management techniques/technology to improve performance in degraded

GNSS conditions such as near tree canopy, tall buildings, or other objects.

13. Shall provide data correction services that provide horizontal accuracies of 2 cm or better.

14. Shall support operation with AndroidTM and iOS platforms.

15. Shall be capable of 360 GNSS tracking.

16. Shall be capable of simultaneously tracking, at a minimum, the following satellite signals: GPS, GLONASS, Galileo, BEIDOU, and SBAS.

17. Shall have GNSS chips with minimum of 672 channels.

18. Shall have integrated, 3.5G cellular modem.

19. Shall have a fully integrated sealed 450 MHz radio modem with frequency range of 403 to 473 MHz.

20. Shall have radio range of at least 3 km.

21. Shall use rechargeable, removable Lithium-ion “smart” battery with LED status indicators.

22. Shall be capable of operating from an external 12 VDC (nominal) power source.

23. Shall operate over a range of temperature from at least -40 to 65o C.

24. Shall have a maximum precision of 8 mm horizontal and 15 mm vertical.

2 EA. Base and Rover Mode Configuration:

25. Shall be compatible with Receiver described above.

26. Shall include the configuration necessary to activate the Receiver to be usable in a Base and Rover mode.

2 EA. Dual Battery Charger:

27. Shall be compatible with the Receiver described above.

28. Shall consist of a dual-slot battery charging cradle.

29. Shall include power supply and power cord.

30. Shall include North American plugs.

2 EA. Rechargeable Battery

31. Shall be compatible with Receiver described above.

32. Shall consist of a lithium-ion type rechargeable battery.

1 EA. Base Station Extension

33. Shall be compatible with Receiver described above.

34. Shall consist of a base station height adapter (0.15 m)

35. Shall include height measurement lever.

36. Shall have threaded post on one end with 5/8 x 11 male threads.

1 EA. Controller for GNSS Receiver:

37. Shall be compatible with Receiver described above.

38. Shall include a 7” color, multi-touch, LED backlit, touchscreen display. Display shall also be readable in sunlight and include anti-glare features.

39. Shall support WWAN Worldwide Network connectivity.

40. Shall be capable of operating for at least 4 hrs on a single battery charge.

41. Shall be capable of operating from internal, removable, rechargeable batteries with LED indicators.

42. Shall have an integrated speaker and microphone.

43. Shall have charger/dc power-in, USB, and serial RS232 ports.

44. Shall have backlight keyboard with QWERTY type key arrangement.

45. Shall allow for MicroSIM card and expansion with SDXC card.

46. Shall be AT&T and Verizon certified.

47. Shall be WI-FI and Bluetooth capable.

48. Shall have 3.5 mm mini-jack connection.

49. Shall have at least 8 GB RAM and 64 GB for storage.

50. Shall have front and rear facing cameras

51. Shall have integrated 3-axis accelerometer, magnetic, ambient light, and proximity sensor.

52. Shall have integrated GNSS.

53. Shall operate over a range of temperatures from at least -20 to 60o C.

54. Shall be capable of withstanding at drop from 4 ft. onto a hard surface.

55. Shall be compatible with Windows 10 operating system.

56. Shall include all applicable accessories including battery pack, AC power adapter and charger, stylus with tether, screen protector, and hand strap.

1 EA. Software:

57. Shall be compatible with the Controller described above.

58. Shall consist of field applications software to support workflows with the Receiver described above.

59. Shall be optimized for measuring points, stake-out points, lines, arcs, alignments, and scanning.

60. Shall provide graphical routines for calculating points and features.

61. Shall be capable of providing a continuous display of maps or video and forms in a “side-by-side” manner.

62. Shall support coordinate geometry routines.

63. Shall allow user to collect, share, and deliver data and information in the field.

1 EA. Pole Mount:

64. Shall be compatible with Controller described above.

65. Shall allow for Controller to be mounted to a pole and locked into place.

66. Shall include a pole claw for attaching to a pole

67. Shall be capable of being setup for left- or right-hand usage.

1 EA. Charger and Batteries:

68. Shall be compatible with removable, rechargeable batteries used with Controller described above.

69. Shall include external battery with international power cord.

70. Shall include at least one extra set of two (2) batteries.

1 EA. Controller Carrying Case:

71. Shall be compatible with Controller described above.

72. Shall be a carrying case/shoulder bag.

1 EA. Radio Kit:

73. Shall be compatible with Receiver described above.

74. Shall consist of a wireless UHF data radio modem.

75. Shall be capable of 4 user-defined power levels form 2W to 35W.

76. Shall support 1 Hz RTK corrections.

77. Shall be capable of “over-the-air” transmission rates of at least 19,200 bps.

78. Shall operate over a range of frequencies from 410 to 430 MHz.

79. Shall include a backlit LCD with navigation buttons.

80. Shall include an RS232 port.

81. Shall be capable of operating from an external 12 VDC power source.

82. Shall be constructed of impacting resistant materials with water-tight and corrosion resistant connectors.

Shall include a handle with tripod clip.

83. Shall include a TNC female antenna connector.

1 EA. Antenna Kit:

84. Shall be compatible with Radio described above.

85. Shall consist of 5 dB gain antenna.

86. Shall operate of range of frequencies from 410 to 430 MHz.

87. Shall include a carrying case.

1 EA. Field Battery Kit:

88. Shall be compatible with the Radio described above.

89. Shall include 12-volt, 35-AHr. Sealed lead-acid battery, power cord and international power adapter kit, and carrying bag for battery.

1 EA. Range Pole with BiPod:

90. Shall consist of a carbon fiber range pole with bipod.

91. Shall consist of a two-piece range pole with a fixed height of 6.5 ft.. 39.

92. Bipod legs shall extend to 6 ft. and collapse down to at least 45 inches.

93. Legs shall be fluorescent yellow in color.

94. Shall include a carrying case suitable for the range pole and bipod.