B08_ATCH_1_SALIENTS.pdf
PDF 241 KB Posted
- Solicitation number
- 140G0126Q0179
About this file
This is a Salient Characteristics document (S25075) for the USGS Water Science Center in Sacramento, CA describing the procurement of 150 HP outboard twin boat engines and associated accessories for installation on a 23-foot work vessel used to service a network of gaging stations.
The requirement specifies two 150 HP outboard engines—one with standard/clockwise rotation and one with counterclockwise rotation—each featuring a 16-valve, double overhead camshaft, in-line 4-stroke configuration with Digital Electronic Control (DEC) technology. Key engine specifications include full throttle rpm range of 5000-6000, EFI fuel induction system, electronic starting with electronic throttle, power trim/tilt capability with 70° tilt and -4° to +16° trim range, 25-inch shaft length, 50+ Amp alternator output, wet sump lubrication, forward/neutral/reverse gear shift, thermostatic cooling system, 10-micron fuel/water separator filter, mechanical steering with 30° steering angle, freshwater flush device, multi-layer anti-corrosion paint system, variable speed trolling controls, and 3-year warranty. The procurement also includes a comprehensive suite of accessories: DEC binnacle twin engine control box with push-button speed and trim controls, main station start switch kit, two DEC main engine harnesses (23 ft. minimum length), multi-function touchscreen display kit with cable/adapter harness, display installation kit, pigtail and main bus wiring harnesses (3 ft., 6 ft., and 10 ft. lengths), two 10-micron fuel/water separator filter assemblies, tilt helm unit assembly and steering control unit, two 6-foot helm harnesses, two 5-foot SCU link harnesses, two 3-blade stainless steel propellers (14.25" diameter, pitch 17, one RH and one LH rotation), and one 13½-inch stainless steel steering wheel with control knob.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140G0126Q0179.pdf | ||
| B08_ATCH_2_508.pdf | ||
| B08_ATCH_3_FISMA.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics S25075
The USGS Water Science Center in Sacramento, CA needs to purchase twin outboard boat engines and accessories. The engines will be installed on a work vessel that will be used to service a network of gaging stations.
150 Hp OUTBOARD TWIN ENGINES and ACCESSORIES
This requirement consists of 150 Hp outboard twin engines and accessories for mounting on a 23-foot boat.
Salient Characteristics:
1 ea. Outboard Engine with Standard/Clockwise Rotation:
1. Shall consist of a 16-valve, double overhead camshaft, in-line 4-stroke, 150 Hp outboard engine.
2. Shall have full throttle rpm range from 5000 to 6000 rpm.
3. Shall employ Digital Electronic Control (DEC) technology.
4. Shall have power trim/tilt capability with integrated tilt limiter.
5. Shall include mechanical steering.
6. Shall have EFI fuel induction system.
7. Shall accept unleaded fuel.
8. Shall use a 10-micron fuel/water separating fuel filter.
9. Shall exhaust through propeller.
10. Propeller shall have right hand/clockwise rotation.
11. Shall have a thermostatic control cooling system.
12. Shall have alternator output of at least 50 Amps.
13. Shall have electronic starting system with electronic throttle.
14. Shall have wet sump lubrication.
15. Shall have forward, neutral, reverse gear shift.
16. Shall have shaft length of 25"
17. Shall have degree of tilt at 70°.
18. Shall have degree of trim from -4° through +16°.
19. Shall include a freshwater flush device that allows the engine to be flushed without running.
20. Shall include a multi-later, anti-corrosion barrier/paint system to prevent corrosion.
21. Shall have steering angle of least at 30° from center, either direction.
22. Shall include features to minimize noise associated with shifting gears.
23. Shall include variable speed trolling controls.
24. Shall have a 3-year warranty.
1 ea. Outboard Engine with Counterclockwise Rotation:
25. Shall have all the same salient characteristics as described above except that propeller shall have counterclockwise (left hand) rotation.
Additional Required Accessories for Engine Installation
1 ea. Twin Engine Control Box:
26. Shall consist of a DEC binnacle with integral power and all start/stop features directly on the unit.
27. Shall have twin handle, and single station configuration for twin engines.
28. Shall include push button up-down speed controls and individual trim control buttons.
1 ea. Twin Engine Key Switch Panel:
29. Shall consist of a main station start switch kit for twin engine configuration.
2 ea. Engine Harness:
30. Shall consist of the DEC main engine harness that connects the engine to the main station control box.
31. Shall be at least 23 ft. in length.
1 ea. Display Kit:
32. Shall consist of a multi-function, backlit, touchscreen display kit for the DEC twin engines.
33. Shall include applicable cable/adapter harness and protective cover.
1 ea. Display Install Kit:
34. Shall consist of a kit for installing the display.
35. Shall include multi-hub, 4-pin cap, adapter harness, hub power harness, and fuel tank hardness.
1 ea. 3’ Pigtail Harness:
36. Shall consist of a 3 ft. pigtail bus wiring harness for integration between electronic devices.
1 ea. Main Bus Harness:
37. Shall consist of 10 ft. main bus wiring harness for integration between electronic devices.
2 ea. Fuel/Water Separator:
38. Shall consist of 10 micron fuel water separating filter assembly kit.
1 ea. Tilt Helm Unit Assembly:
39. Shall consist of a tilt helm assembly that is compatible with the mechanical steering mechanism.
1 ea. Tilt Helm Unit:
40. Shall consist of a tilt helm unit for steering control.
2 ea. 6’ Helm Harness:
41. Shall consist of a 6 ft. helm harness.
2 ea. SCU Link Harness:
42. Shall consist of a 5 ft. SCU link harness.
1 ea. 6’ Pigtail Harness:
43. Shall consist of 6 ft. command link pigtail wiring harness for integration between electronic devices.
2 ea. Propeller:
44. Shall consist of a 3-blade stainless steel propeller.
45. Shall have a diameter of 14.25” and pitch of 17.
46. One propeller shall be configured for RH rotation, and one configured for LH rotation.
1 ea. Steering Wheel w/Knob:
47. Shall consist of a 13 ½-in, stainless steel steering wheel with control knob.
File details come from the government source that posted it. Updated .