B08_ATCH_1_SALIENTS.pdf
PDF 212 KB Posted
- Solicitation number
- 140G0126Q0029
About this file
This document is a Salient Characteristics specification for a Surface Drive Outboard Motor and Accessories (S25099) for the U.S. Geological Survey. The specification details a 40 Hp Surface Drive Outboard Motor with specific technical requirements, including a V-twin cylinder arrangement with Electronic Fuel Injection, instant/automatic reverse capability, 180-degree lower unit rotation, electric clutch, adjustable trim, speeds up to 29 mph, and a 3-year warranty. The motor includes additional components such as a Remote Steering Single Kit and a Single Center Console Control Plate.
Delivery instructions specify that the contractor must arrange shipment of the packaged motor to a FedEx Freight Depot/Hub in Reno, NV, using FedEx account number 531100034. The end user is Norbert VandenBranden from the U.S. Geological Survey's California Water Science Center in West Sacramento, CA, who will coordinate pickup of the shipment upon delivery. The motor is designed with features to facilitate operation in mud environments, including a 1.52:1 gear reduction ratio and heavy-duty aluminum and stainless steel construction.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140G0126Q0029.pdf | ||
| B08_ATCH_3_FISMA.pdf | ||
| B08_ATCH_2_508.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics S25099
SURFACE DRIVE OUTBOARD MOTOR and ACCESSORIES
Salient Characteristics:
1 ea. Surface Drive Outboard Motor:
1. Shall consist of a 40 Hp Surface Drive Outboard Motor with V-twin cylinder arrangement and Electronic Fuel Injection (EFI).
2. Shall include instant/automatic reverse and full power reverse capability with the lower unit capable of rotating 180 degrees.
3. Shall include an electric clutch for instant forward and neutral control.
4. Shall include an adjustable trim feature.
5. Shall be capable of producing speeds up to 29 mph and at least 56 lbs. of torque.
6. Shall include heavy-duty aluminum and stainless steel construction.
7. Shall include a momentary forward and reverse button.
8. Shall include hydraulic power trim.
9. Shall include a 20-inch transmission shaft.
10. Shall include a tachometer/hour meter.
11. Shall include a safety kill switch.
12. Shall have a gear reduction ratio of 1.52:1 to facilitate operation in mud environments.
13. Shall include a weather resistant wiring harness.
14. Shall include a spline-shaft stainless steel propeller and stainless steel muffler.
15. Shall include a 3-year warranty.
1 ea. Remote Steering Single Kit:
16. Shall consist of a steering components kit including, but not limited to, steering wheel, throttle level and cable, tachometer/hour meter electrical bus bar, trim and rocker switches, and all wiring to install and rig the motor.
1 ea. Single Center Console Control Plate:
17. Shall consist of a pre-cut center console control plate for mounting to an existing center console to facilitate assembly of steering wheel and other console components.
1 ea. Packaging/Crating:
18. The motor and its components shall be adequately packaged, crated, and/or boxed to prevent any damage during shipment/transportation by common freight carrier.
Salient Characteristics S25099
Delivery Instructions:
The Contractor shall arrange to have the crated/packaged motor, and all required components, delivered to a Fedex Freight Depot/Hub in Reno, NV. The Fedex account no. to use for shipment is 531100034.
The Contractor shall coordinate with the end user (listed below), and Fedex, to arrange for the end-used to pick up the shipment upon delivery in Reno, NV.
Norbert VandenBranden U.S. Geological Survey California Water Science Center 3115 Ramco St. Suite 180 West Sacramento, CA 95691 Phone: (916) 764-2463 nvandenbranden@usgs.gov mailto:nvandenbranden@usgs.gov
File details come from the government source that posted it. Updated .