B08_ATCH_1_SALIENTS.pdf

197 KB Posted

Attached to
SINGLE-AXIS TILT SENSORS IAW SALIENTS
Solicitation number
140G0126Q0005
Issued by

About this file

Written by GovTribe AI ·

This document is a Salient Characteristics specification for Single-Axis Tilt Sensors (Inclinometers) with the contract number S25078. The specification requires 5 single-axis tilt sensors and 5 corresponding connector cables with precise technical requirements. Key sensor specifications include a solid-state design with +/- 60-degree tilt limit, 0-5 VDC output, 12 VDC power operation, IP66 sealed housing, -40 to 80°C operating temperature range, and RoHS compliance. The sensors must be compact (no larger than 3.75" x 1.75" x 1.6") and have specific performance characteristics such as +/- 0.5 degree transverse axis misalignment and 0.02% non-linearity. The accompanying 80-foot connector cables must be compatible with the sensors and include stripped/tinned open lead wires on one end.

View the file

Other files

File Type Posted
Sol_140G0126Q0005.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Salient Characteristics

S25078

Single-Axis Tilt Sensors (Inclinometers)

SALIENT CHARACTERISTICS:

5 ea. Single-Axis Tilt Sensor:

1. Shall consist of a self-contained, solid state, single-axis, analog tilt sensor (inclinometer).

2. Shall include a fluid dampening mechanism.

3. Shall have a tilt limit input range of +/- 60o.

4. Shall have a full range output of 0-5 VDC.

5. Shall be capable of operating from an external 12 VDC (nominal) power source.

6. Shall include a sealed housing with a cable connector, with an Ingress Protection (IP) rating of IP66, or better.

7. Transverse axis misalignment (o max) shall be +/- 0.5 or less.

8. Shall have a non-linearity (% FRO max)2 rating of 0.02% or less.

9. Shall be capable of operating over a temperature range from at least -40 to 80o C.

10. Shall be Restriction of Hazardous Substances (RoHS) compliant.

11. Shall be no larger than 3.75” x 1.75” x 1.6”.\

5 ea. Connector Cable:

12. Shall be compatible with the tilt sensor described above.

13. Shall consist of an 80 ft. power/data cable with a compatible mating connector.

14. Shall include stripped/tinned open lead wires on one end.

File details come from the government source that posted it. Updated .