B08_ATCH_1_SALIENTS.pdf
PDF 212 KB Posted
- Attached to
- Boat Trolling Motor and Equipment IAW Salients
- Solicitation number
- 140G0124Q0093
About this file
This document summarizes a federal solicitation for the procurement of boating equipment by the U.S. Geological Survey. The solicitation seeks the delivery of one trolling motor, one anchor, one chartplotter, and one sonar system to a location in West Sacramento, California within 30 days of the contractor receiving the purchase order. Request for Quote 140G0124Q0093 will be issued on or around February 28, 2024, with written quotes due by March 5, 2024 at 8:00 AM Eastern Time. This procurement is set aside for total small businesses with a NAICS code of 333618 and size standard of 1,500 employees. The anticipated award date is March 30, 2024. Quotes may be emailed to the point of contact, Cynthia Nicanor of the USGS California Water Science Center, by the response deadline. The contracting office is the USGS OAG Reston Acquisition Branch in Reston, Virginia.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B08_ATCH_3_FISMA.pdf | ||
| B08_ATCH_2__508.pdf | ||
| Sol_140G0124Q0093.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics S24052
Boat Trolling Motor, Anchor, Chartplotter, and Sonar System
Salient Characteristics
1 ea. Trolling Motor:
1. Shall consist of a bow mount, pivot style, boat trolling motor.
2. Shall be capable of at least 100 lbs. of thrust.
3. Shall have a shaft length of 63 inches.
4. Shall include a brushless motor to minimize interference with sonar scanning.
5. Shall include electronic steering capability.
6. Shall be capable of wirelessly integrating with Chartplotter device described herein.
7. Shall include wireless remote-control capability.
8. Shall be capable of operating from 24-36 VDC power.
9. Shall be constructed from corrosion resistant material and able to withstand marine environments.
10. Shall include built-in multiband GPS and heading sensors.
11. Shall include sonar and a built-in transducer.
12. Shall be capable of integrating with the Sonar System described herein.
1 ea. Shallow Water Anchor:
13. Shall consist of an electro-mechanical, 3-stage vertical deployment type, shallow water anchoring system.
14. Shall have a depth capability of at least 15 ft.
15. Shall be capable of being mounted to the transom of a boat.
16. Shall include Bluetooth communication capability.
17. Shall have various control options for operating the anchor including wireless remote, wireless foot switch, control panel, or mobile app. Mobile app shall be compatible with Apple and Android devices.
18. Shall include a deployment notification alarm.
19. Shall include built-in floating suspension feature.
20. Shall include user selectable anchoring modes.
21. Shall include a built-in work light.
22. Shall include an LED indicator for depth position.
23. Shall be black in color and weigh no more than 60 lbs.
1 ea. Chartplotter:
24. Shall consist of a marine, chartplotter/fish finder system with a 12” touchscreen.
25. Shall be preloaded with preloaded U.S. Inland and Coastal charts software.
26. Shall include a 12-inch IPS keyed assist touchscreen with a resolution of at least 1280 x 800 pixels.
27. Shall be capable of being flush. or bail, mounted to the dashboard. Bail mount shall be a quick-release type.
28. Shall have an Ingress Protection (IP) water rating of IPX7, or better.
29. Shall have built-in wireless connectivity and networking capability.
30. Shall be equipped with applicable NMEA0183 input and output ports, sonar port, and compatible with
Garmin network ports.
31. Shall be compatible with Garmin Panoptix products including the Sonar System described below.
32. Shall support multiband, multi-constellation GPS as well as GLONASS, GALILEO, and BEIDOU satellite navigation systems.
33. Shall support Wide Area Augmentation System (WAAS) navigation services.
Salient Characteristics S24052
34. Shall be capable of receiving updates at the rate of at least 10 Hz.
35. Shall include built-in support for Ultra High-Definition Clear Vu and Side Vu scanning sonars.
36. Shall be NMEA 2000 compatible and include support for Autopilot, Fusion-Link, Engine Data and
Engine Switching.
37. Shall be capable of accepting up to 2 micro-SD data cards with storage capability of at least 5,000 waypoints, 50,000 track points, and 100 navigation routes.
38. Shall include built-in Auto Guidance+ support.
39. Shall be ActiveCaptain compatible and support AIS and DSC chartplotting features.
40. Shall be no larger than 13.5” x 9.5” x 4.0” and weigh no more than 5.5 lbs.
41. Shall not include a transducer.
42. Shall include all required accessories for operating the system such as, but not limited to, power/data cable(s), adapter cable(s), bail mount, protective cover, mounting hardware, and documentation.
1 ea. Sonar System:
43. Shall consist of a live scanning sonar system including sonar interface box, transducer, and mounts for producing real-time open water sonar images.
44. Shall be compatible with the trolling motor described above and include features that allow the transducer to be mounted to the trolling motor shaft or the propeller housing.
45. Shall have a depth scanning capability down to at least 500 ft. in fresh water and 350 ft. in salt water.
46. Shall be capable of providing sonar images in water as shallow as 3 ft.
47. Shall include built-in stabilization features to keep sonar images steady.
48. Shall support Forward, Down, and Perspective scanning modes.
49. Shall have an Ingress Protection (IP) water rating of IPX7.
50. Shall include a built-in AHRS (Attitude Heading Reference System).
51. Shall have a frequency range from 265 to 550 KHz.
52. Interface box shall be no larger than 10” x 6” x 3”, weigh no more 4.5 lbs., and be capable of operating over a temperature range from at least -15 to 60o C.
53. Transducer shall include a 20 ft. cable.
54. Shall be capable of operating from 12 VDC (nominal) power.
55. Shall include all required accessories for operating the system such as, but not limited to, power cable, network cable, adapter cable(s), mounts, bracket(s), and mounting hardware.
File details come from the government source that posted it. Updated .