B01 Attachment J07 Lighting Control Devices.pdf

PDF 1 MB Posted Aug 14, 2024

Attached to: Pine Ridge Radiology Upgrades Federal contract opportunity
Solicitation number: 75H70124R00054
Issued by: Department of Health and Human Services Indian Health Service

About this file

Written by GovTribe AI · Aug 14, 2024

This document is a Request for Proposal (RFP) for a construction project to upgrade the Pine Ridge Radiology Department. The key details are:

The scope of work includes removing and replacing casework, countertops, ceiling tiles, flooring, and lighting in the radiology department. Several walls will be moved, and electrical receptacles will be added. The project is set aside for small businesses under NAICS code 236220 (Commercial and Institutional Building Construction) with a size standard of $45 million. The construction period is 250 calendar days after the notice to proceed. The estimated construction magnitude is between $250,000 and $500,000. The contract type is Firm Fixed Price, and the evaluation will be based on the lowest price technically acceptable proposal. Offerors must submit proposals electronically by the stated due date. The procuring agency is the Department of Health and Human Services Indian Health Service.

View the file

Other files for this federal contract opportunity

Other files attached to Pine Ridge Radiology Upgrades, newest first.
File	Type	Posted
B01 RFP 75H70124R00054 Pine Ridge Radiology Upgrades.pdf	PDF	Aug 14, 2024
B01 Attachment J05 Surface and Colors.pdf	PDF	Aug 14, 2024
B01 Attachment J06 Light Fixture Devices.pdf	PDF	Aug 14, 2024
B01 Attachment J09 Past Performance Questionnaire.docx	DOCX document	Aug 14, 2024
B01 Attachment J03 Reception Window.pdf	PDF	Aug 14, 2024
B01 Attachment J04 Flooring Base Finishes.pdf	PDF	Aug 14, 2024
B01 Attachment J01 WD SD20240017 dated 2024 07 19.pdf	PDF	Aug 14, 2024
B01 Attachment J02 Plan Set.pdf	PDF	Aug 14, 2024
B01 Attachment J08 Self Performed Calculation Sheet.docx	DOCX document	Aug 14, 2024

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Table of Contents

TYPE $D NPODMA DX WH BAA LITHONIA

TYPE $OS WSXA PDT WH BAA LITHONIA

TYPE OS1 NCM PDT 9 RJB BAA LITHONIA

TYPE OS2 NCM PDT 10 RJB BAA LITHONIA

TYPE NCOMKIT NCOMKIT G2 LITHONIA

TYPE PPD NPP16 D EFP BAA LITHONIA

TYPE PPDER NPP16 ER EFP BAA LITHONIA

OVERVIEW

The nPODMA Series WallPods are single gang nLight-enabled decorator wall switches that enable toggle/ raise/lower/scene control of lighting zones. Equipped with soft-click push-buttons, and a green LED indicator for each button, these devices allow field replaceable and custom engraved button options.

nPODMA WallPods communicate with other nLight devices, via CAT-5e cable, through RJ-45 connectors and can be daisy-chained to work with nLight power packs and/or nLight-enabled fixtures to provide switch control operations.

The scene control option presents a convenient method of selecting a custom lighting control scene for spaces in which installed, or requesting a global profile scene be run across several remote zones. By default, scene control wall switches are configured as on/off toggle switches and are to be customized programmatically through the SensorView software.

*In order to utilize a blink warning, system gateway and additional programming is required.

FEATURES

• Communicates with nLight network

• Remotely configurable/upgradeable

• Soft-click push-button control

• Sets lights to one of two or four preset levels with single button push (nPODMA xL versions only)

• Scene controllers run locally stored scenes or global scenes (stored on gateway)

• Capable of Programming 4 Different Scene Types

• Local “Profile” Scene — Modifies the operational configuration of up to 80 devices in the local zone. Stopping scene will revert devices to default settings.

• Local “Preset” Scene — Modifies on/off/dim levels for up to 16 local switch groups. Exit scene through additional “preset” scene or WallPod control.

• Global “Profile” Scene — Modifies the operational configuration of any devices on the system.

Stopping scene will revert devices to default settings. Scene is stored on the system Gateway.

• Global “Preset” Scene — Modifies on/off/dim levels for up to 128 global switch groups. Exit scene through additional “preset” scene or WallPod control.

• Easy-to-install screwless wall plate design offers a clean, uninterrupted aesthetic for a more refined look in the space.

• A full range of color options provides a variety of choices for your building designs with the assurance that the housing and the wall plate match.

• 1, 2, or 4 channel on/off

• 1, 2, or 4 channel raise/lower

• “Dynamic” options for custom button names when pairing with Acuity Brands nTUNE fixtures

CUSTOM BUTTON ENGRAVING

• Standard Button labeling is shown on back

• Custom lettering for units can be specified and ordered at: nGrave Form

• To ensure color uniformity, ordering templates facilitate specifying all buttons on a unit as custom lettered. Replacing single buttons not recommended

• Buttons may ship separately and require field installations nPODMA Wallpod: On/Off & On/ Off+Raise/Lower

Catalog Number: Date: Project:

Capable This item is an A+ capable component, which has been designed and tested to provide out-of-the-box luminaire compatibility with simple commissioning, when included as part of an A+ Certified™ Solution.

To learn more about A+, visit www.acuitybrands.com/aplus.

Buy American BAA variants of this product are assembled in the USA and meet the Buy America(n) government procurement requirements under FAR, DFARS and DOT. Please refer to www.acuitybrands.com/buy-american for additional information.

Warranty Five-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application.

Specifications subject to change without notice.

Buy American

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: $D

LITHONIA

NPODMA DX WH BAA

L F X https://img.acuitybrands.com/public-assets/catalog/1158366/ngrave-request-form.pdf http://www.acuitybrands.com/aplus http://www.acuitybrands.com/buy-american http://www.acuitybrands.com/support/warranty/terms-and-conditions akaul Rectangle nPODMA nPODMA Example: nPODMA DX WH

Series Poles & Scenes Dimming Control Dynamic Color Temp/Humidity Buy America(n)67 nPODMA [blank] None 2P Two channels 4P Four channels 2L 1 Two levels 2L AB 1 High/low step control 4L 2 Four levels with raise/lower 1SB 1 1 Scene control (2 buttons) 2S 2 Scene control (2 buttons) 2SB 1 2 Scene control (4 buttons) 4S 4 Scene control (4 buttons) 4SB 1 4 Scene control (8 buttons)

[blank] Standard DX On/off + raise/lower control

[blank] Standard CCT 3 Correlated color temperature GRSC 5 Grayscale COLOR 5 Color control EDUTW4 Tuneable White

WH White IV Ivory GY Gray AL Lt Almond BK Black RD Red

[blank] Normal LT Low temp

[blank] Standard BAA Buy America(n)

Act Compliant

ORDERING INFORMATION

WIRING

TYPICAL WIRING

WallPods and/or nLight wall switch sensors can be configured together to create zones with multiple switching locations.

nPP16 EFP

CAT-5

LOAD

CAT-5

120 V 277 V

BLK

ORN

Power to WallPod device is provided via the CAT-5e connection to an nLight enabled fixture, nLight power pack (e.g. nPP16), power supply (nPS80), or Bridge (nBRG 8).

nPP16 EFP

CAT-5

LOAD

CAT-5CAT-5

120 V 277 V

BLK

ORN

ON/OFF

3-WAY CONFIGURATION WIRING

Notes

1. Not available with DX option.

2. Only available with DX option.

3. Only available with 2P DX version.

4. Only available with 4S and 4S DX versions.

5. Only available with 2P DX and 4S DX versions.

6. Only available in WH, IV, or GY.

7. Not available with LT option.

8. Only available for Variety Packs.

9. Not available for SSW Series.

10. Ships with custom screwless wall plate.

11. Single units only available with SSW series.

ACCESSORIES

Series # of Gangs Mounting Color Packaging

WS xPODA Wall Plates (Standard)

SSW 10 Sealed Cover

1 GNG Single Gang

[blank] Standard WH White IV Ivory GY 9 Gray AL 9 Lt Almond

BK 9 Black RD Red VP 9 Variety Pack

[blank] Single Unit 11

M5 9 5 Pack M6 8,9 6 Pack

All nPODMA switches are shipped with wall plates and mounting flanges (WS XPODA), and mounting flanges (WS XPODA), however, the following order information is available to acquire replacement wall plates. Also compatible with the WALLP Series.

WALL SWITCH CLEANING

It will occasionally be necessary to clean the wall switches. All nPODMA switches may be wiped down with a soft cloth or paper towel dampened with glass cleaner, vinegar and water, hydrogen peroxide, or a mild abrasive. Spray a limited amount on the cloth or paper towel prior to applying. Do not spray cleaner on the switches directly, and do not wipe the switches down with a towel saturated (drips when wrung out) with cleaner.

If the ability to clean the switches using chemical spray disinfectants is desired, we recommend the use of the Sealed Screwless Wall Plate (SSW). The Sealed Screwless Wall Plate is a cover for the standard wall plate, designed with an IP54 rating. It consists of a transparent silicone rubber layer that covers the wall switch to prevent liquids from entering the wall switch while maintaining a tactile button feel. The Sealed Screwless Wall Plate is the ideal solution to help protect a wall switch from fluid entering the device while enabling the use of disinfectants recommended by the EPA for use against SARS-CoV-2, the coronavirus that causes COVID-19, which often require spraying or saturating the surface.

For more information on the Sealed Covers

ON/OFF + DIMMMING (nPODMA DX)

[D] Dimming Control

CAT-5

LOAD

CAT-5

120 V 277 V

BLK

ORN

VIO

nPP16 EFP

NPODMA DX WH BAA

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: $D

LITHONIA

NPODMA DX WH BAA

L F X https://img.acuitybrands.com/public-assets/catalog/1715568/wallp-series.pdf?abl_version=11%2f18%2f2021+21:06:49&DOC_Type=SPEC_SHEET) https://sensorswitch.acuitybrands.com/products/detail/1715566/sensorswitch/ssw-series/sealed-screwless-wall-plate nPODMA

DEFAULT LABELING

ODMA 2SB nPODMA 4SnPODMA 2S DX nPODMA 4SB nPODMA 4S DXMA 2S nPODMA 2SB nPODMA 4SnPODMA 2S DX nPODMA 4SB nPODMA 4S DXDMA 2S nPODMA 2SB nPODMA 4SnPODMA 2S DX nPODMA 4SB nPODMA 4S DX nPODMA 1SB nPODMA 2S nPODMA 2SB nPODMA 4SnPODMA 2S DX nPODMA 4SB nPODMA 4S DXnPODMA 1SB nPODMA 2S nPODMA 2SB nPODMA 4SnPODMA 2S DX

SB nPODMA 2S nPODMA 2SB nPODMA 4SnPODMA 2S DX nPODMA 4SB nPODMA 4S DX nPODMA 1SB nPODMA 2S nPODMA 2SB nPODMA 2S DX

Dynamic wallpods below are paired with Acuity Brands nTUNE fixtures for out-of-box operation. Reference fixture cut sheets for additional details.

nPODMA 4S EDUTW nPODMA 4S DX GRSCnPODMA 4S DX COLORnPODMA 4S DX EDUTW

ON/OFF

COLOR

nPODMA 2P DX COLOR

ON/OFF

CCT

nPODMA 2P DX CCT

ON/OFF

GRAYSCALE

nPODMA 2P DX GRSC

OFF

nPODMA

ON/OFF

nPODMA DX

OFF

nPODMA 2P

ON/OFF

nPODMA 2P DX

ON OFF

nPODMA 4P

OFF

nPODMA 4P DX

LEVEL 1

100% nPODMA 2L

LEVEL 2

50%

ON/OFF

LEVEL 1

LEVEL 2

nPODMA 4L DX

LEVEL 1

100%

LEVEL 3

50%

LEVEL 2

75%

LEVEL 4

25%

Off

LEVEL

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: $D

LITHONIA

NPODMA DX WH BAA

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: $D

LITHONIA

NPODMA DX WH BAA

L F X nPODMA

Electrical Input Ratings 15-24VDC, 5mA, Class 2 (nLight network power)

Standards/Ratings Energy Management Equipment, UL916 (E167435)

Mechanical Dimensions 2.74”H x 1.68”W x 1.63”D (70mm x 43mm x 41mm) - does not include ground strap

Mounting Single-Gang Box or Low Voltage Ring Connection Type RJ-45 nLight Network Ports (2)

Environmental Warrantied Operating Temperature 32°F to 140°F (0°C to 60°C) LT Option: -4°F to 140°F (-20°C to 60°C)

Relative Humidity Up to 90%, Non-Condensing Standards/ Ratings RoHS

Security Complies with California Civil Code Title 1.81.26, Security of Connected Devices, approved under Senate Bill No. 327 (2018)

SPECIFICATIONS

• Ensure CAT-5e cable(s) an effectively fed through the gang box

• Push the CAT5e cables through the back of the gang box

• Remove the wall plate from the device by pulling the sides out to expand the wall plate and release it from the mounting flanges.

• Access RJ-45 port(s) on the WallPod by sliding the plastic guard up

• Insert the CAT-5e cable(s) to the RJ-45 port(s)

• Slide the guard back onto metal strap

• Connect the unit to the gang box

• The unit will connect to the gang box by screws, one at the top and one at the bottom

• To ensure correct wall plate installation, drive the screws until the mounting flanges contact the wall surface. If the screws are overdriven, the mounting flanges will disengage, preventing wall plate installation. If this happens, reattach the mounting flange(s) and install to correct position. (The flanges may be reattached by inserting the two tabs in the side of the unit and pushing the part inward to engage the three snaps.)

• Reattach the wall plate

• Expand the wall plate horizontally

• Place the wall plate onto the unit

• Contract the horizontally expanded wall plate onto the unit such that the side flange features seat inside the wall plate

SLID

TO RJ-45 PORT

CAT-5

PROGRAMMING

• Refer to instruction card IN-11.3 for directions on programming the switch via the upper-most left push-button. All buttons are factory set to the matching switch channel (button 1 - channel 1, button 2 - channel 2, etc). For nPODMA 4P DX, channels to be controlled are selected first, then the control button (on/off or raise/lower).

• For 2L and 4L variants, the preset dim level of a button can be changed by first adjusting the light level with either the unit’s raise/lower buttons (nPODM 4L DX) or via another raise/lower WallPod broadcasting on the same switch channel (necessary with a nPODM 2L). Once lights are at desired level, hold a LEVEL button for 8 seconds until the LED flashes. Levels can also be set via SensorView.

INSTALLATION

Attention! Only use non-booted CAT5e cables.

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: $D

LITHONIA

NPODMA DX WH BAA

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: $D

LITHONIA

NPODMA DX WH BAA

L F X

WSXA BAA SERIES

WSXA BAA Series Wall Switch Sensor

Catalog Number: Date: Project:

WSXA/WSXA MWO

On/Off

Single Relay

WSXA D/WSXA MWO D

On/Off/Dimming

Single Relay

OVERVIEW

The WSXA Family of wall switch occupancy sensors provides simple and cost effective solutions for commercial and residential lighting control applications. All WSXA Family sensors have a stylish low profile appearance, soft-click buttons, and provide small motion detection up to 20 ft (6.10 m), making them perfect for private offices, private restrooms, closets, copy rooms, or any other small enclosed space. Additionally, all WSXA Family sensors have a patent-pending wiring method that enables them to function either with or without a neutral connection. WSXA units come pre-configured for wiring without a neutral, however if connection to neutral is required by code, contractors can convert the unit in seconds.

FEATURES

• Devices can be programmed with traditional push button programming

• Compatible w/LEDs, electronic & magnetic ballasts, CFLs, & incandescents

• 100% passive detection, no potential for interference with other building systems

• Small motion detection to up to 20 ft, Large motion detection up to 36ft

• Push-button programmable without removing cover plate - adjustable time delays & operating modes

• Dual technology (PDT) utilizes PIR/Microphonics™ detection (patented)

• Device accommodates powering over ground or neutral connection (patent pending)

• Fully meets NEC 2017 Section 404.2C neutral requirements - no current leakage to ground when connected to neutral

• Line power and load wires are interchangeable - impossible to wire backwards (patented)

• Integrated Photocell (disabled by default) prevents light from turning on if sufficient daylight is present

• New aesthetic with vandal resistant lens

CAN BE USED TO

COMPLY WITH 2019

DIMMER CONTROL

DEVICE REQUIREMENTS

Buy American (BAA) This product is assembled in the USA and meets The Buy America(n) government procurement Requirements under FAR, DFARS and DOT. Please refer to www.acuitybrands.com/but-american for additional information.

Warranty Five-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application.

Specifications subject to change without notice.

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: $OS

LITHONIA

WSXA PDT WH BAA

L F X http://www.acuitybrands.com/support/warranty/terms-and-conditions

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/sensorswitch

WSXA BAA SERIES

ORDERING INFORMATION

WSXA Single Pole Example: WSXA MWO PDT D WH BAA

Series Option Detection Mode Dimming2 Operating Mode

WSXA Wall Switch Sensor [blank] Passive Infrared (PIR) PDT Dual Technology

[blank] On/Off D2 Dimming

[blank] Pole 1 auto-on Pole 2 Manual On

2SA Both poles Manual On (default)

Voltage Color 1,3,4 Temp / Humidity Buy American Act

[blank] 120-277 VAC WH White IV Ivory GY Gray

[blank] Standard BAA

WSXA 2P Example: WSXA 2P WH LT BAA

Series Option Detection Mode Poles Operating Mode

WSXA Wall Switch Sensor (Occupancy and Daylighting)

[blank] Passive Infrared(PIR) PDT Passive Dual Technology

2P 2 Poles [blank] Pole 1 auto-on Pole 2 Manual On

2SA Both poles Manual On (default)

Voltage Color 1,2 Temp/Humidity Buy American Act

[blank] 120-277 VAC WH White IV Ivory GY Gray

[blank] Standard BAA

Adaptive Daylight Harvesting (ADH) With Sensor Switch’s Adaptive Daylight Harvesting (ADH), automatic dimming has never been more reliable - even in a wall switch. It works by establishing two state change set-points;

daylight and darkness. The light level in the space will then be automatically maintained by intelligently controlling the dim level of the electric light source. Set-points can be established using the “Set Now” option or programmed using desired light levels as measured in foot candles (fc).

DIM

ING

RANGE

DARKNESS SET-POINT

DAYLIGHT SET-POINT

AMPLE DAYLIGHT

NO DAYLIGHT

/ KEY LIGHTS FULL ON LIGHTS FULL DIM

Notes:

1 Matching wall plate provided for 120-277 VAC Units.

2 IV and GY is only offered as WSXA PDT 2P and WSXA PDT 2P GY.

Notes:

1 Matching wall plate provided for 120-277VAC units.

2 0-10V Dimming Only. Not offere in GY, IV or RD.

3 IV only offered in WSXA PDT, WSXA VA and WSXA SA.

4 Only offered as WSXA PDT GY and WSXA PDT RD.

WSXA PDT

WH BAA

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: $OS

LITHONIA

WSXA PDT WH BAA

L F X

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/sensorswitch

WSXA BAA SERIES

Electrical Input Ratings 120-277VAC, 50/60 Hz

Output Ratings 120VAC, 800W, 6.7A - Tungsten, Standard Ballast, Electronic Ballast 277VAC, 1200W, 4.3A - Tungsten, Standard Ballast, Electronic Ballast 120/277 1/4 HP - Motor

Relay Type Latching

Low Voltage Output Ratings 0-10VDC, Sinks <50mA Standards/ Ratings Energy Management Equipment, UL916 (E167435)

Mechanical Dimensions 2.74"H x 1.68"W x 1.63"D (70mm x 43mm x 41mm) - does not include ground strap

Mounting Single-Gang Box

Connection Type Low-Voltage Leads, Line-Voltage Leads

Environmental Warrantied Operating Temperature 32°F to 140°F (0°C to 60°C)

Relative Humidity Up to 90%, Non-Condensing Standards/ Ratings RoHS

SPECIFICATIONS

COVERAGE PATTERNS

36 30 20 10 0 ft 10 20 30 36 12 9 6 3 0 m 3 6 9 12

Small motion detection

Small motion detection to ~20 ft

0 m

0 ft

Small motion ~40 ft coverage

TOP VIEW

1.2 m 4 ft

Small motion detection to ~20 ft

Large motion detection to >36 ft

SIDE VIEW

0 18 27 369ft 0 6 9 123m

• Small motion (e.g. hand movements) detection up to 20 ft (6.10 m), ~625 ft2

• Large motion (e.g. walking) detection greater than 36 ft (10.97 m), ~2025 ft2

• Wall-to-wall PIR coverage

• Units with -PDT (Passive Dual Technology) option (also called Microphonics) provide overlapping detection of human activity over the complete PIR coverage area. Advanced filtering is utilized to prevent non-occupant noises from keeping the lights on.

• Tested to NEMA WD 7-2011

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: $OS

LITHONIA

WSXA PDT WH BAA

L F X

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/sensorswitch

WSXA BAA SERIES

WSX Family (IS-WSXA-003)

Notes:

• Black wires can be used interchangeably

• Violet and pink wires are not present on devices without D option

• Cap off violet and pink wires if dimming functionality is not being used

• Per NEC requirements, the 0-10V violet and pink wires must be installed as Class One.

• The 0-10V control wires must not exceed 250 ft (76 m) in length and must be sized at no less than 20 AWG

CONVERTIBLE NEUTRAL

SINGLE RELAY, 120-277 VAC

GROUND ONLY

SINGLE RELAY, 120-277 VAC

WIRE COLOR KEY

120-277 VAC WIRING

BLK - Line Input BLK - Line Output VIO - Low Voltage Dim Output (0-10 VDC) PNK - Low Voltage Common RED - Low Voltage Communication Wire

***Some Pink wires may come as Gray

WIRING

PNK

*0-10V Dimming Common from fixture may be pink or as otherwise indicated per section 410.69 of the

2020 NEC

GRY PNK*

WSX (PDT) 2P

BLU BLK

BLK

GRN

IF REQUIRED

120V/277V

BLU LOAD ALOAD B

WHT

* 0-10V Dimming Common from fixture may be pink or as otherwise indicated per section 410.69 of the 2020 NEC

2 POLE CONFIGURATION

Step 1:

Remove Yellow

Label

Step 2:

Loosen Screws and Remove Metal Link

Step 3:

Connect Neutral to

Silver Screw and Ground to Green

Screw

CONVERSION FROM GROUND ONLY NO NEUTRAL TO NEUTRAL WIRING

This product is pre-configured for wiring without a neutral; however, if connection to neutral is required by code, the unit easily converts in seconds.

PNK

*0-10V Dimming Common from fixture may be pink or as otherwise indicated per section 410.69 of the

2020 NEC

GRY PNK*

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: $OS

LITHONIA

WSXA PDT WH BAA

L F X

OVERVIEW

The nCM xx RJB family of nLight ceiling/surface mount occupancy sensors provide a range of networked sensor solutions for applications with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). nCM xx RJB family sensors utilize 100% digital Passive Infrared (PIR) detection and are available with several lens options, providing flexibility for multiple mounting height and coverage pattern requirements. Dual technology occupancy detection can also be added as an option for applications where occupants are stationary for long periods of time. nCM xx RJB family sensors are also available with an optional auxiliary low voltage relay for simple integration with a BMS system or other building system.

nCM xx RJB family sensors are powered via the nLight network bus and typically communicate with one or more nLight enabled luminaires (e.g. Lithonia VTLED Series) or nLight relay/dimming packs to enable control of fixtures individually or in groups. These configurations work standalone and do not require a connection to a larger nLight network.

FEATURES

• 100% digital PIR detection

• Optional dimming photocell (ADCX option)

• Optional auxiliary low voltage relay (AR option) for dry contact output – relay only tracks occupancy by default, ignoring switch and photocell commands

• LED status indicator

• Adjustable settings (e.g. occupancy time delays, photocell set-points) via push-button or SensorView software application

• Broadcasts occupancy and photocell information over a local nLight channel

• Remotely upgradeable firmware

Catalog Number: Date: Project:

To learn more about A+, visit www.acuitybrands.com/aplus.

Specifications subject to change without notice.

nCM xx RJB nCM PDT xx RJB nCM 9 RJB nCM PDT 9 RJB nCM 10 RJB nCM PDT 10 RJB nCM 6 RJB

Buy American

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: OS1

LITHONIA

NCM PDT 9 RJB BAA

L F X http://www.acuitybrands.com/aplus http://www.acuitybrands.com/buy-american http://www.acuitybrands.com/support/warranty/terms-and-conditions nCM xx RJB — TN-139-001 nCM xx RJB Example: nCM PDT 9 ADCX RJB

Series / Detection Coverage Type Options (See Below) RJ45 Port Location Buy America(n)2 nCM PIR Detection nCM PDT Dual Tech (PIR/ Micro-phonics)

9 Small Motion 360° 10 Large Motion 360 ° 6 High Mount 360 ° (not available with PDT version)

RJB Rear RJ45 (CAT5e patch cable & RJ45 splitter included) blank Standard BAA Buy America(n) Act

Compliant

ORDERING INFORMATION

nCM xx RJB Options

Photocell Auxiliary Relay Preset Type 1 Time Delay Temp/ Humidity

[blank] Standard (No photocell) ADCX Automatic Dimming Control

(of remote dimming output)

[blank] None AR Low Voltage Aux. Relay

[blank] Single Time Delay 2P Dual Time Delay

[blank] Standard 15M 15 Minutes 20M 20 Minutes 30M 30 Minutes

[blank] Standard LT Low Temp / High

Humidity

NOTES:

1. Not available with AR or ADCX options.

2. Not available with AR, 2P, Time Delay, or LT options

COVERAGE PATTERNS*

HIGH MOUNT 360º (Model # nCM 6)

• Best choice for 15 to 45 ft (4.57 to 13.72 m) mounting heights

• 15 to 20 ft (4.57 to 6.10 m) radial coverage overlaps area lit by a typical high bay fixture

• Excellent detection of large motion (e.g.

walking) up to 35 ft (10.76 m)

• Excellent detection of extra large motion (e.g.

forklifts) up to a 45 ft (13.72 m)

30 20 10 0 ft 10 20 30

9.1 6 3 0 m 3 6 9.1

0 ft

0 m

4.6

9.1

13.7

LOW VIEW HIGH VIEW

0 ft

0 m

4.6

20 10 0 ft 10 20

6 3 0 m 3 6

30 20 10 0 ft 10 20 30

9.1 6 3 0 m 3 6 9.1

0 ft

0 m

4.6

9.1

13.7

LOW VIEW HIGH VIEW

0 ft

0 m

4.6

20 10 0 ft 10 20

6 3 0 m 3 6

• Best choice for large motion detection (e.g.

walking)

• 360º conical shaped pattern

• Provides ~24 ft (7.32 m) radial coverage

(~2000 ft2) when mounted at 9 ft (2.74 m)

• 7 to 15 ft (2.13 to 4.57 m) mounting heights provide 16 to 36 ft (4.88 to 10.97 m) radial coverage

• Detection range improves when walking across beams compared to into beams

LARGE MOTION 360º (Model # nCM 10/nCM PDT 101)

0 ft

0 m

2.7

28 21 14 7 0 ft 7 14 21 28

8.5 6.4 4.3 2.1 0 m 2.1 4.3 6.4 8.5

SIDE VIEW TOP VIEW

0 ft

8.5

4.3

0 m

4.3

8.5

1 Sensors with Microphonics™ provides overlapping detection of human activity over the complete PIR coverage area. Advanced filtering is also utilized to prevent non-occupant noises from keeping the lights on.

• Best choice for small motion (e.g. hand movements) detection

• 360º conical shaped pattern

• Provides 12 ft (3.66 m) radial coverage (~500 ft2) when mounted to standard 9 ft (2.74 m) ceiling

• 8 to 15 ft (2.44 to 4.57 m) mounting heights provide 10 to 20 ft (3.05 to 6.10 m) radial coverage

SMALL MOTION 360º (Model # nCM 9/nCM PDT 91)

12 6 0 ft 6 12

3.7 1.8 0 m 1.8 3.7

SIDE VIEW

0 ft

0 m

2.7

TOP VIEW

0 ft

3.7

1.8

0 m

1.8

3.7

* Coverage pattern shown is derived from NEMA WD7 testing

NCM PDT 9 RJB BAA

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: OS1

LITHONIA

NCM PDT 9 RJB BAA

L F X nCM xx RJB — TN-139-001

Wiring an nCM xx ADCX RJB to an nLight Dimming Pack

Wiring to an nLight Enabled Luminaire

Wiring to an nLight Relay Pack

TYPICAL APPLICATIONS

The following instructions are for mounting sensor directly to a ceiling tile or sheetrock surface. Sensor’s mounting holes also align with standard round fixture or single gang handy box (screws not provided).

1. Using template included with unit, mark spots on ceiling tile/sheetrock for cable hole and mounting anchors/screws

2. Drill 1/2” hole through ceiling surface at location indicated on template

3. Insert provided anchors into ceiling surface at locations indicated on template

4. Remove provided RJ-45 splitter from sensor’s attached CAT5e cable and then thread cable (and low voltage wires if -AR option included) through hole from underside

5. Mount sensor to anchors using two screws provided

6. Attach provided RJ45 splitter device (model CAT5 Y) above ceiling to cable from sensor

(see diagram on right)

7. Interconnect CAT-5e cables to/from rest of nLight zone to RJ45 splitter

8. Once power is received via CAT-5e connection, all devices in zone will automatically begin functioning together according to each device’s defaults

9. Install decorative sensor lid by rotating clockwise

10. Refer to included instruction card for default settings and directions on push-button programming.

CAT-5e

BRN

CAT-5e Splitter

CAT-5e CAT-5e

- AR option (contact closure) to/from nLight Zone

TYPICAL APPLICATIONS

nPP16

WHT (neutral)

BLU (line in)

BLU (line out)

CAT-5e

120 VAC

277 VAC1

BLK1 (line in)

ORN1 (line in)

LOAD

To other nLight devices (optional)

CAT-5e CAT-5e Splitter

(included)

CAT-5e CAT-5e

To other nLight devices (optional) nCM xx RJB

WHT(neutral)

BLU (line in)

BLU (line out)

VIO (low voltage dim out)

GRY (low voltage common)

GRN

CAT-5e nPP16 D or nPP16 DS

0-10 VDC

Ballast or

LED Driver

120 VAC

277 VAC1 ORN1 (line in)

BLK1 (line in)

To other nLight devices (optional)

CAT-5e Splitter (included)

CAT-5e CAT-5e

To other nLight devices (optional) nCM xx ADCX RJB

CAT-5e To other nLight devices (optional) nLight Enabled Luminaire

CAT-5e Splitter (included)

CAT-5e CAT-5e To other nLight devices (optional) nCM xx RJB or nCM xx ADCX RJB

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: OS1

LITHONIA

NCM PDT 9 RJB BAA

L F X nCM xx RJB — TN-139-001

Electrical Input Ratings 15-24VDC, 3mA, Class 2 (nLight network power)

Output Ratings 24 VAC/VDC, 1A - Resistive (AR option)

Relay Type Latching (AR option)

Standards/ Ratings Energy Management Equipment, UL916 (E167435)

Mechanical Dimensions 4.55”W x 1.55”D (116mm x 40mm)

Mounting Single-Gang or Octagonal Box, Surface Mount

Color White

Finish Matte Connection Type RJ-45 nLight Network Ports (2 ports via included RJ-45 splitter)

Low-Voltage Leads (AR option)

Environmental Warrantied Operating Temperature Standard: 14°F to 185°F (-10°C to 85°C) PDT option: 14°F to 140°F (-10°C to 60°C) LT option: -4°F to 185°F (-20°C to 85°C) PDT LT options: -4°F to 140°F (-20°C to 60°C)

Relative Humidity Up to 90%, Non-Condensing Standards/ Ratings RoHS

General Standards/ Ratings System Component to aid in compliance with Title 24, ASHRAE 90.1, IECC

SPECIFICATIONS

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: OS1

LITHONIA

NCM PDT 9 RJB BAA

L F X nCM xx RJB — TN-139-001

OVERVIEW

FEATURES

• 100% digital PIR detection

• Optional dimming photocell (ADCX option)

• Optional auxiliary low voltage relay (AR option) for dry contact output – relay only tracks occupancy by default, ignoring switch and photocell commands

• LED status indicator

• Adjustable settings (e.g. occupancy time delays, photocell set-points) via push-button or SensorView software application

• Broadcasts occupancy and photocell information over a local nLight channel

• Remotely upgradeable firmware

Catalog Number: Date: Project:

To learn more about A+, visit www.acuitybrands.com/aplus.

Specifications subject to change without notice.

nCM xx RJB nCM PDT xx RJB nCM 9 RJB nCM PDT 9 RJB nCM 10 RJB nCM PDT 10 RJB nCM 6 RJB

Buy American

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: OS2

LITHONIA

NCM PDT 10 RJB BAA

Series / Detection Coverage Type Options (See Below) RJ45 Port Location Buy America(n)2 nCM PIR Detection nCM PDT Dual Tech (PIR/ Micro-phonics)

9 Small Motion 360° 10 Large Motion 360 ° 6 High Mount 360 ° (not available with PDT version)

RJB Rear RJ45 (CAT5e patch cable & RJ45 splitter included) blank Standard BAA Buy America(n) Act

Compliant

ORDERING INFORMATION

nCM xx RJB Options

Photocell Auxiliary Relay Preset Type 1 Time Delay Temp/ Humidity

[blank] Standard (No photocell) ADCX Automatic Dimming Control

(of remote dimming output)

[blank] None AR Low Voltage Aux. Relay

[blank] Single Time Delay 2P Dual Time Delay

[blank] Standard 15M 15 Minutes 20M 20 Minutes 30M 30 Minutes

[blank] Standard LT Low Temp / High

Humidity

NOTES:

1. Not available with AR or ADCX options.

2. Not available with AR, 2P, Time Delay, or LT options

COVERAGE PATTERNS*

HIGH MOUNT 360º (Model # nCM 6)

• Best choice for 15 to 45 ft (4.57 to 13.72 m) mounting heights

• 15 to 20 ft (4.57 to 6.10 m) radial coverage overlaps area lit by a typical high bay fixture

• Excellent detection of large motion (e.g.

walking) up to 35 ft (10.76 m)

• Excellent detection of extra large motion (e.g.

forklifts) up to a 45 ft (13.72 m)

30 20 10 0 ft 10 20 30

9.1 6 3 0 m 3 6 9.1

0 ft

0 m

4.6

9.1

13.7

LOW VIEW HIGH VIEW

0 ft

0 m

4.6

20 10 0 ft 10 20

6 3 0 m 3 6

30 20 10 0 ft 10 20 30

9.1 6 3 0 m 3 6 9.1

0 ft

0 m

4.6

9.1

13.7

LOW VIEW HIGH VIEW

0 ft

0 m

4.6

20 10 0 ft 10 20

6 3 0 m 3 6

• Best choice for large motion detection (e.g.

walking)

• 360º conical shaped pattern

• Provides ~24 ft (7.32 m) radial coverage

(~2000 ft2) when mounted at 9 ft (2.74 m)

• 7 to 15 ft (2.13 to 4.57 m) mounting heights provide 16 to 36 ft (4.88 to 10.97 m) radial coverage

• Detection range improves when walking across beams compared to into beams

LARGE MOTION 360º (Model # nCM 10/nCM PDT 101)

0 ft

0 m

2.7

28 21 14 7 0 ft 7 14 21 28

8.5 6.4 4.3 2.1 0 m 2.1 4.3 6.4 8.5

SIDE VIEW TOP VIEW

0 ft

8.5

4.3

0 m

4.3

8.5

• Best choice for small motion (e.g. hand movements) detection

• 360º conical shaped pattern

• Provides 12 ft (3.66 m) radial coverage (~500 ft2) when mounted to standard 9 ft (2.74 m) ceiling

• 8 to 15 ft (2.44 to 4.57 m) mounting heights provide 10 to 20 ft (3.05 to 6.10 m) radial coverage

SMALL MOTION 360º (Model # nCM 9/nCM PDT 91)

12 6 0 ft 6 12

3.7 1.8 0 m 1.8 3.7

SIDE VIEW

0 ft

0 m

2.7

TOP VIEW

0 ft

3.7

1.8

0 m

1.8

3.7

* Coverage pattern shown is derived from NEMA WD7 testing

NCM PDT 10 RJB BAA

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: OS2

LITHONIA

NCM PDT 10 RJB BAA

L F X nCM xx RJB — TN-139-001

Wiring an nCM xx ADCX RJB to an nLight Dimming Pack

Wiring to an nLight Enabled Luminaire

Wiring to an nLight Relay Pack

TYPICAL APPLICATIONS

1. Using template included with unit, mark spots on ceiling tile/sheetrock for cable hole and mounting anchors/screws

2. Drill 1/2” hole through ceiling surface at location indicated on template

3. Insert provided anchors into ceiling surface at locations indicated on template

4. Remove provided RJ-45 splitter from sensor’s attached CAT5e cable and then thread cable (and low voltage wires if -AR option included) through hole from underside

5. Mount sensor to anchors using two screws provided

6. Attach provided RJ45 splitter device (model CAT5 Y) above ceiling to cable from sensor

(see diagram on right)

7. Interconnect CAT-5e cables to/from rest of nLight zone to RJ45 splitter

8. Once power is received via CAT-5e connection, all devices in zone will automatically begin functioning together according to each device’s defaults

9. Install decorative sensor lid by rotating clockwise

10. Refer to included instruction card for default settings and directions on push-button programming.

CAT-5e

BRN

CAT-5e Splitter

CAT-5e CAT-5e

- AR option (contact closure) to/from nLight Zone

TYPICAL APPLICATIONS

nPP16

WHT (neutral)

BLU (line in)

BLU (line out)

CAT-5e

120 VAC

277 VAC1

BLK1 (line in)

ORN1 (line in)

LOAD

To other nLight devices (optional)

CAT-5e CAT-5e Splitter

(included)

CAT-5e CAT-5e

To other nLight devices (optional) nCM xx RJB

WHT(neutral)

BLU (line in)

BLU (line out)

VIO (low voltage dim out)

GRY (low voltage common)

GRN

CAT-5e nPP16 D or nPP16 DS

0-10 VDC

Ballast or

LED Driver

120 VAC

277 VAC1 ORN1 (line in)

BLK1 (line in)

To other nLight devices (optional)

CAT-5e Splitter (included)

CAT-5e CAT-5e

To other nLight devices (optional) nCM xx ADCX RJB

CAT-5e To other nLight devices (optional) nLight Enabled Luminaire

CAT-5e Splitter (included)

CAT-5e CAT-5e To other nLight devices (optional) nCM xx RJB or nCM xx ADCX RJB

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: OS2

LITHONIA

NCM PDT 10 RJB BAA

L F X nCM xx RJB — TN-139-001

Electrical Input Ratings 15-24VDC, 3mA, Class 2 (nLight network power)

Output Ratings 24 VAC/VDC, 1A - Resistive (AR option)

Relay Type Latching (AR option)

Standards/ Ratings Energy Management Equipment, UL916 (E167435)

Mechanical Dimensions 4.55”W x 1.55”D (116mm x 40mm)

Mounting Single-Gang or Octagonal Box, Surface Mount

Color White

Finish Matte Connection Type RJ-45 nLight Network Ports (2 ports via included RJ-45 splitter)

Low-Voltage Leads (AR option)

Relative Humidity Up to 90%, Non-Condensing Standards/ Ratings RoHS

General Standards/ Ratings System Component to aid in compliance with Title 24, ASHRAE 90.1, IECC

SPECIFICATIONS

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: OS2

LITHONIA

NCM PDT 10 RJB BAA

L F X

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.nlightcontrols.com © 2014-2021 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/27/21 nCOMKIT nCOMKIT Example: nCOMKIT G2

Series Generation nCOMKIT nLight Commissioning Kit G2 Single Piece Device

OVERVIEW

The nComKit is a commissioning device for nLight Wired stand-alone zones. The device uses low voltage RJ45 connection to communicate with the nLight Wired network and a USB connection to allow for programming using SensorView on a PC. It works by discovering all of the devices that are daisy-chained up to a bridge port to enable updating and configuring for the discovered devices.

nCOMKIT

ORDERING INFORMATION

FEATURES

Catalog Number: Date: Project:

• No Assembly Required - The single piece device offers enhanced durability and convenience

• Extended Cable Length - To reach a variety of ceiling heights from a laptop

• Plug-and-Play – Simply plug into the nLight device and your laptop to interface with the

SensorView application for easy configuration nLight Commissioning Kit

Warranty Five-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application.

Specifications subject to change without notice.

NCOMKIT G2

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: NCOMKIT

LITHONIA

NCOMKIT G2

L F X http://www.acuitybrands.com/support/warranty/terms-and-conditions

This Page Left Blank Intentionally

L F X

NPP16_EFP_FAMILY

Series Dimming Fault Protection Default Mode Voltage Temp/humidity Buy America(n)2 nPP16 Power/Relay Pack

[blank] None D 0-10VDC Dimming output (via chase nipple)

DS 0-10VDC Dimming output (via side slot)

EFP External Fault Protection

[blank] Auto On (Switch Ch. 1) SW2 Auto On (Switch Ch. 2) SW3 Auto On (Switch Ch. 3) SW4 Auto On (Switch Ch. 4) SA Manual On (Switch Ch. 1) SA2 Manual On (Switch Ch. 2) PA70 Auto On to 70% (Partial On)¹ PA Auto On to 50% (Partial On)¹

[blank] 120/277VAC

230 220-240VAC

347 120/347VAC

[blank] Standard LT Low temp

[blank] Standard BAA Buy

American(n) Act Compliant

OVERVIEW

The nLight nPP16 EFP family of power packs is the workhorse of an nLight system, delivering robust system performance and design versatility for commercial and industrial lighting control applications. The nPP16 EFP family is capable of switching loads via an internal latching relay designed with robust protection from the harsh switching requirements of T5 fluorescent and LED loads. These power packs also provide nLight system bus power - up to 40mA from each of its two RJ-45 ports - by transforming Class 1 line voltage (120/277 VAC or 347 VAC) to Class 2 low voltage (15 VDC). This power is typically utilized by other nLight devices within the power pack’s local control zone; however, remaining power is also made available over the network for Bridges and devices in other zones to utilize.

FEATURES

• Communicates w/ nLight Network

• Self-Contained Relay Switches Line Voltage Load

• Supplies 40mA of Bus Power / RJ-45 port

• Optional out-of-box vacancy and partial-on modes

• Remotely Configurable/Upgradeable

• Push-Button Programmable

• Configurable Relay Logic

• Extended Chase Nipple

• Plenum rated

• Includes fuse integrated to relay wirelead for protection from load faults

• Meets NEMA410 ratings for LED/electronic ballast inrush nPP16 EFP Power/Relay Pack

ORDERING INFORMATION

Catalog Number: Date: Project:

Model #: nPP16 (D) EFP

Notes:

1. Requires D or DS option

2. Not available with 230, 347, or LT options

Specifications subject to change without notice.

ACCESSORIES

NPP FUSE J10 Replacement Fuse

Buy American

NPP16 D EFP BAA

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: PPD

LITHONIA

NPP16 D EFP BAA

L F X http://www.acuitycontrols.com http://www.acuitybrands.com/buy-american http://www.acuitybrands.com/support/warranty/terms-and-conditions

NPP16_EFP_FAMILY

Electrical Input Ratings 120/277VAC, 50/60 Hz 220-240VAC, 50/60Hz (with 230 option) 120/347VAC, 50/60 Hz (with 347 option)

Output Ratings 120/277VAC, 50/60 Hz 220-240VAC, 50/60Hz (with 230 version) 120/347VAC, 50/60 Hz (with 347 version) 16A - Tungsten, Standard Ballast, Electronic Ballast, General Purpose 120VAC, 50/60 Hz, 1/2 HP -Motor SCCR: 5KA 100mA, 0-10VDC Dimming Sink Current

Relay Type Latching

Low Voltage Output Ratings 15VDC, 40mA per RJ-45 Port (80mA total)

Class Rating 0-10V Dimming can be wired Class 1 or 2 Standards/ Ratings Energy Management Equipment, UL916 (E167435)

Mechanical Dimensions 3.38”H x 2.53”W x 1.83”D (86mm x 64mm x 47mm) - does not include ½” chase nipple

Mounting 1/2” Knockout (7/8" hole)

Color White Connection Type RJ-45 nLight Network Ports (2)

Non-Dimming Model: Line Voltage Leads Dimming Model: Line and Low Voltage Leads

Environmental Warrantied Operating Temperature Standard: 14°F to 122°F (-10°C to 50°C) Standard: 14°F to 113°F (-10°C to 45°C) if enclosed within a junction box LT option: -4°F to 122°F (-20°C to 50°C)

Relative Humidity Up to 90%, Non-Condensing Standards/ Ratings RoHS, Plenum UL2043

General Standards/ Ratings System Component to aid in compliance with Title 24, ASHRAE 90.1, IECC

SPECIFICATIONS

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: PPD

LITHONIA

NPP16 D EFP BAA

L F X http://www.acuitycontrols.com

NPP16_EFP_FAMILY

CAT-5e

0-10 VDC

Ballast or LED Driver nPP16-D or -DS

EFP

VIO

PNK

RED

GRN

LEGEND

Base

(120/277VAC)

(220-240VAC)

(120/347VAC)

WHT Neutral

BLK 120VAC N/A 120VAC

ORN 277VAC 220-240VAC 347VAC

RED 120/277VAC 220-240VAC 120/347VAC

BLU Load (Switched Out)

VIO 0-10V Dim (+)

PNK* 0-10V Com (-)

GRN Earth Ground

CAT-5e nPP16

EFP

RED

LEGEND

Base

(120/277VAC)

(220-240VAC)

(120/347VAC)

WHT Neutral

BLK 120VAC N/A 120VAC

ORN 277VAC 220-240VAC 347VAC

RED 120/277VAC 220-240VAC 120/347VAC

BLU Load (Switched Out)

WIRING

T568B pin/pair assignment is recommended for all CAT-5e cables. For Supply Connections, use 14 AWG or larger wires rated for at least 90° C.

Diagram for units with a dimming option (-D or -DS suffix)

Diagram for non-dimming units

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: PPD

LITHONIA

NPP16 D EFP BAA

L F X http://www.acuitycontrols.com

NPP16_ER_EFP_FAMILY

OVERVIEW

The nLight nPP16 ER EFP family of power packs is the workhorse of an nLight system, delivering robust system performance and design versatility for commercial and industrial lighting control applications. The nPP16 ER EFP switches loads via an internal latching relay designed with robust protection from the harsh switching requirements of T5 fluorescent and LED loads. Optional 0-10V dimming outputs (D or DS options) are designed with circuit isolation and provide up to 100mA of current sinking capability. The nLight nPP16 ER EFP Series relay pack is used to switch luminaires powered via an emergency circuit. The nLight nPP16 ER EFP relay pack is ideally suited for use in conjunction with a standard nnPP16 EFP power/relay pack that controls a zone's normal powered lighting.

FEATURES

• Automatically Overrides Emergency Lights On To Full Brightness Upon Normal Power Loss

• Communicates w/ nLight Network

• Self-Contained Relay Switches Line Voltage Load

• Optional out-of-box vacancy and partial-on modes

• Remotely Configurable/Upgradeable

• Test/programming button

• Configurable Relay Logic

• Extended Chase Nipple

• Plenum rated

• Includes fuse integrated to relay wirelead for protection from load faults

• Meets NEMA410 ratings for LED/electronic ballast inrush nPP16 ER EFP Emergency Relay Pack

ORDERING INFORMATION

Catalog Number: Date: Project:

Model #: nPP16 (D) ER EFP

Notes:

1. Requires D or DS option

2. Not available with 230, 347, or LT options

Specifications subject to change without notice.

ACCESSORIES

NPP FUSE J10 Replacement Fuse (10 Pack)

Series Dimming Emergency Fault Protection Default Mode Voltage Temp/humidity Buy America(n)2 nPP16 Power/Relay Pack

[blank] None

D 0-10VDC

Dimming output (via chase nipple)

DS 0-10VDC

Dimming output (via side slot)

ER UL924

Emergency Operation

EFP External Fault Protection

[blank] Auto On ( Switch Ch. 1)

SW2 Auto On (Switch Ch. 2)

SW3 Auto On (Switch Ch. 3)

SW4 Auto On (Switch Ch. 4)

SA Manual On (Switch Ch. 1)

SA2 Manual On (Switch Ch. 2)

PA70 Auto On to 70% (Partial On)¹

PA Auto On to 50% (Partial On)¹

[blank] 120/277VAC

230 220-240VAC

347 120/347VAC

[blank] Standard LT Low temp

[blank] Standard BAA Buy

America(n) Act Compliant

Buy American

NPP16 D ER EFP BAA

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: PPDER

LITHONIA

NPP16 D ER EFP BAA

L F X http://www.acuitycontrols.com http://www.acuitybrands.com/buy-american http://www.acuitybrands.com/support/warranty/terms-and-conditions

NPP16_ER_EFP_FAMILY

Electrical Input Ratings 120/277VAC, 50/60 Hz, 220-240VAC, 50/60Hz (with 230 option), 120/347VAC, 50/60 Hz (with 347 option), 120-277VAC, 50/60 Hz Normal Power Sense, 120-347VAC, 50/60 Hz Normal Power Sense (with 347 option)

Output Ratings 120-347VAC, 50/60 Hz, 16A - Tungsten, Standard Ballast, Electronic Ballast, General Purpose, 120VAC, 50/60 Hz, 1/2 HP - Motor, SCCR: 5KA, 100mA, 0-10VDC Dimming Sink Current

Relay Type Latching Low Voltage Output Ratings Self-powering, does not supply nLight bus voltage

Class Rating 0-10V Dimming can be wired Class 1 or 2 Standards/ Ratings Energy Management Equipment, UL916 (E167435), Emergency Power Equipment, UL924 (E342232)

Mechanical Dimensions 3.38”H x 2.53”W x 1.83”D (86mm x 64mm x 47mm)-does not include ½” chase nipple Mounting 1/2” Knockout (7/8" hole)

Color Red Connection Type RJ-45 nLight Network Ports (2)

Non-Dimming Model: Line Voltage Leads Dimming Model: Line and Low Voltage Leads

Environmental Warrantied Operating Temperature Standard: 14°F to 122°F (-10°C to 50°C), Standard: 14°F to 113°F (-10°C to 45°C) if enclosed within a junction box LT option: 4°F to 122°F (-20°C to 50°C)

Relative Humidity Up to 90%, Non-Condensing Standards/ Ratings RoHS, Plenum UL2043

General Standards/ Ratings System Component to aid in compliance with Title 24, ASHRAE 90.1, IECC

SPECIFICATIONS

PINE RIDGE UPS PHARMACY REMODEL

FIXTURE TYPE: PPDER

LITHONIA

NPP16 D ER EFP BAA

L F X http://www.acuitycontrols.com

NPP16_ER_EFP_FAMILY

CAT-5e nPP16 ER

EFP

Normal (sense only)

OPTIONAL

TEST SWITCH RED

Emergency

YEL RED|YEL

WHT|RED

LEGEND

Base

(120/277VAC)

(220-240VAC)

(120/347VAC)

WHT/RED Emer. Neutral YEL 120VAC Emer. Hot N/A

RED/YEL 277VAC Emer. Hot 220-240VAC Emer. Hot 347VAC Emer. Hot

RED 277VAC Emer. Hot 220-240VAC Emer. Hot 347VAC Emer. Hot BLU Emer.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 14, 2024.