B01 - Attachment 0007 W53W9L23010053 CMTR MJU77B IGNITER TOP 12122022.pdf

CERTIFIED MATERIAL TEST REPORT / CERTIFICATE OF ANALYSIS

For those material(s) identified below, a Certificate of Analysis (C of A) test report shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity). The test results contained on the Certificate of Analysis report(s) shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below. Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.

The test report(s) shall contain the following:

a. Name and address of Manufacturer and Supplier when *applicable.

(*If not manufactured by the Supplier.)

b. Purchase order number.

c. Identification of material by specification, revision, amendment and dates, together with type, grade, size etc. number.

d. Quantity of material.

e. Material testing results shall address drawing specifications.

Component / Item: Igniter Top.

Drawing: 3976AS109 Rev. D Made from Material: Dwg. 3677AS121 Rev. E Nylon Resin Use 100% Virgin Material.

No Reground Allowed.

Note: The Igniter Top shall be identifiable / traceable to the individual mold cavity.

Note: The Igniter Top shall be identified with a traceable lot number at time of Delivery.

Note: Item(s) cannot be accepted without documentation to support the required material was used to produce.

f. Quantity tested, sample size, and specimen type as applicable.

g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.

Component: Igniter Top.

Requirements for: MJU-77/B Program.

12 December, 2022.

jacqueline.harper Jackie's