B01 - Attachment 0004- Certificate of Analysis Material Attachmentpdf_Redacted.pdf
PDF 74 KB Posted
- Attached to
- MJU 76B Pistons Federal contract opportunity
- Solicitation number
- W52P1J-22-Q-PIST
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| B01 - Attachment 0007 - FAR 52.213-3 Alt 1, (b) .docx | DOCX document | |
| B01 - Attachment 0003 - MJU76B Pistons - Pricing Matrix - unlocked DRAFT_20220922.xls | XLS spreadsheet | |
| Attachment 0006 - Lot Number Instructions.docx | DOCX document | |
| B01 - Attachment 0008 - FAR 52.204-24.docx | DOCX document | |
| Attachment 0005 - Technical Data Package Information.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CERTIFICATE OF ANALYSIS / MATERIAL CERTIFICATION
For those material(s) identified below, a Certificate of Analysis (C of A) shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity). The information contained on the Certificate of Analysis shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below. Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.
The certificate of analysis shall contain the following:
a. Name and address of Manufacturer and Supplier when *applicable.
(*If not manufactured by the Supplier.)
b. Purchase order number.
c. Identification of material by drawings, description, specifications, revisions and part number.
d. Quantity of material.
e. Material results shall address drawing specifications.
Item: Piston Drawing DEV21006 R2 Made from Material: Dwg. 3864AS110 Rev. B
Polycarbonate Molding Material.
LEXAN RESIN 1330.
Note: The Piston shall be identifiable / traceable to the individual mold cavity.
Note: The Piston shall be identified with a traceable lot number at time of delivery. See ‘Standard Lot Numbering’ Documentation.
At time of delivery to CAAA, Item(s) cannot be accepted without documentation to support the above (raw) material was used to produce (e.g. Certified Material Test Report / Certificate of Analysis).
f. Quantity tested, sample size, and specimen type as applicable.
g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.
Component: Piston.
Requirements for: MJU-76/B Program
File details come from the government source that posted it. Updated .