B01 - Attachment 0001 Drawing 9243 rev F.pdf

DRAWING REVIEW CHECKLIST

Questions to be answered by Design Engineer:

Y N NA

1. Is there an alternate tool or design that could be used to perform this task?

if yes, please explain what and why not used (i.e., cost, time, etc.).

2. Are cracks, voids, weld seams, or other areas where explosives could accumulate eliminated if it is used in and explosive atmosphere?

3. Are all pinch points eliminated so that neither explosive can be pinched or personnel injured?

4. Is the material specified appropriate for explosive atmosphere if used in this environment?

5. Are all Electrical components properly rated for the type of location where it will be used?

7. Are all commercial components specified for use adequately rated for the type of location where it will be used?

8. Does the item have adequate safety interlocks designed (i.e., two-handed controls, etc.)?

9. Is the item strong enough to perform at 150% of intended use (i.e., weight, pressure, etc.)?

10. Is the item designed with ergonomic considerations (i.e., proper height, ?

repetitive movements, proper gripping, line of sight, strength required to operate?

11. Is the item designed for minimal maintenance and does it provide easy access if maintenance is required?

12. Is the item designed to allow lockout/tag out when maintenance is performed?

13. If required, can the item be decontaminated without destroying its intended use?

14. If required, had adequate special fire protection been built into the design?

15. Has the item been designed to interact with other components within the system?

Signature

6. Is adequate guarding/shielding designed into the item?

16. Distribution Statment: A B C D E F

A

CAAA Form 702-168 Nov. 2019

REVISIONS

LTR DESCRIPTION DATE DATE

NOMENCLATURE MATERIAL

TITLE

ITEM

NO.

NO.

REQ'D

BREAK ALL

SHARP EDGES

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

DECIMALS: .XXX ± .005, .XX ± .01, .X ± .1 ANGLES: ± 30'

FOR DRAWING NO.

CHECKED BY

FABRICATION

SAFETY

APPROVAL

DATE

DATE

DATE

DATE

DRAWN BY

DATE

C SCALE DWG. NO. SHEET

OF

CRANE ARMY AMMUNITION ACTIVITY

ENGINEERING DIVISION

7 1/16

14 3/16

21 1/4

28 5/16

35 7/16

14 1/8

28 3/8

15 1/2

15 1/2

1 1/4

9 3/4

2 X 4 X 48" LONG

1 X 6 X 48" LONG

2 X 12 X 48" LONG

2 X 12 X 45" LONG

2 SEE

NOTE

NOTE:

1. NORMAL ACCEPTED FASTENING METHODS TO

BE USED IN CONSTRUCTION OF PALLET.

2. MATERIAL TO BE #2 CONSTRUCTION GRADE

LUMBER, OR BETTER

4. STRAPPING USED TO BE .035" THK. GALV.

STL. - 1900 LB PULL TEST. QQ-5-781

ASTM 03953-91

3. TOLERANCE TO BE ± 1/4"

*STRAPPING TO BE SECURED WITH

STAPLES TO PREVENT SLIPPAGE.

USE 16 GAGE - 3/4" TO 7/8" LONG

STAPLES. 3 PER SIDE PER STRAP.

FIRST USED FOR VARIOUS STORAGE OPERATIONS AT BUILDINGS 174, 69, STORAGE, ETC. RJ WILSON

31 AUG 1994 N.T.S. 9243 1 1

PALLET WITH SIDEBOARDS

FOR STORAGE - 48" X 48"

A

B

C

D

E

ADDED STRAPPING

DELETED SLOTS IN 2x4'S

RELOCATED STRAPPING

ADDED STAPLE AND

STRAPPING SPECS.

ELIMINATE BANDING

PARALLEL ACROSS ITEM #3

RJW

RJW

RJW

RJW

11/15/94

12/8/94

1/10/95

2/5/97

11/2/1112 GA STAPLE TO 16 GA DRB

3/4" METAL STRAPPING (2EA)

SECURED TIGHTLY AROUND

OUTSIDE OF SIDEWALLS*

3/4" METAL STRAPPING (2 EA) OVER

THE TOP, DOWN SIDES AND UNDER THE

TOP SLATES OF PALLET - SECURED TIGHTLY*

STAPLES

DISTRIBUTION STATEMENT A

ADDED DIST. A NOTEF 7/25/22BJE