B.08.02 Combined Synopsis Solicitation.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information in this notice. This announcement constitutes the only solicitation, quotes are being requested and a written solicitation will not be issued.

***Please read these instructions carefully.***

Solicitation number W9127S22Q0028 is issued as a request for quotation (RFQ).

The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-4.

Set Aside, NAICS Code & Size Standard: This solicitation is set-aside for Small Business.

The NAICS Code 336612 and the applicable size standard of 1000 employees.

Description of requirements for the items to be acquired: The contractor shall provide Boat, Motor and Trailer in accordance with specifications provided and delivered to the MKARNS Project Office.

Date(s) and place(s) of delivery and acceptance and FOB point:

MKARNS Project Office Attn: Russell Malahy 35 Wild Goose Lane Tichnor, AR 72166

The provision at 52.212-1 (Deviation), Instructions to Offerors -- Commercial, applies to this acquisition. Offerors are also required to submit a completed copy of the Request for Quotation cover page and a completed copy of the quote schedule.

Offerors are required to include a completed copy of the provision at 52.212-3 Alt I, Offeror Representations and Certifications -- Commercial Items, with its quote.

The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition.

The clause at 52.212-5 (Deviation), Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. Please see the Clauses Incorporated By Reference section for additional FAR Clauses applicable to this acquisition.

Quotes are due April 19th 2022, at 10:00 a.m. CST. Email submission of quotations are preferred in.pdf form, however, Fax or Mail submissions are allowed.

Required Documents to Submit:

1. Request for Quotation cover page (signed)

2. Completed (filled in) Provisions, as applicable

3. Quote Schedule with unit prices and total prices.

4. Signed Amendments, if applicable

When submitting your quote, be please make sure the solicitation number, W9127S22Q0028, is written in the subject line or on the outside of the envelope.

Email:

brandee.m.wright@usace.army.mil

Fax: (870) 898-2111

If sending by mail, please submit your quotes to the following address:

US Army Corps of Engineers, Little Rock District Contracting Division, Attention: Brandee Wright 1528 Hwy 32 East Ashdown, AR 71822

If you have any questions regarding this solicitation, please contact:

Brandee Wright 501-340-1466 Brandee.m.wright@usace.army.mil mailto:brandee.m.wright@usace.army.mil mailto:Brandee.m.wright@usace.army.mil

REQUEST FOR QUOTATION COVER PAGE 3

US Army Corps of Engineers, Little Rock District Contracting Division

700 West Capitol Avenue Room 7315 Little Rock, AR 72203

W9127S22Q0028 Boat, Motor and Trailer

MKARNS Project Office

Submitted by

Offeror Name:

Offeror Address:

Street

City/State

Offeror Email Address:

Cage Code:

DUNS Number:

TIN:

Telephone Number:

Signature:

Date:

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each Boat, motor and trailer

FFP

Aquatic vegatation management vessel FOB: Destination

PSC CD: 1920

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 15-SEP-2022 1 ARKANSAS POST FIELD OFFICE

DAREN OLSON

35 WILD GOOSE LANE

TICHNOR AR 72166

870-548-2291 FOB: Destination

967165

CLAUSES INCORPORATED BY REFERENCE

52.203-19 Prohibition on Requiring Certain Internal Confidentiality

Agreements or Statements

JAN 2017

52.204-7 System for Award Management OCT 2018

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-22 Alternative Line Item Proposal JAN 2017 52.204-23 Prohibition on Contracting for Hardware, Software, and

Services Developed or Provided by Kaspersky Lab and Other Covered Entities

DEC 2021

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment

DEC 2021

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.212-3 Alt I Offeror Representations and Certifications--Commercial Products and Commercial Services (NOV 2021) Alternate I

OCT 2014

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

DEC 2021

52.212-5 (Dev) Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Products and Commercial Services (Deviation 2018-O0021)

JAN 2022

52.219-1 Alt I Small Business Program Representations (SEP 2021) Alternate I

SEP 2015

52.219-6 (Dev) Notice of Total Small Business Set-Aside (DEVIATION 2020-O0008).

OCT 2020

52.219-14 Limitations On Subcontracting SEP 2021 52.219-28 Post-Award Small Business Program Rerepresentation SEP 2021 52.222-3 Convict Labor JUN 2003 52.222-19 (Dev) Child Labor - Cooperation with Authorities and Remedies

(DEVIATION 2020-O0019)

JAN 2022

52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity SEP 2016 52.222-35 Equal Opportunity for Veterans JUN 2020 52.222-36 Equal Opportunity for Workers with Disabilities JUN 2020 52.222-50 Combating Trafficking in Persons DEC 2021 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

JUN 2020

52.225-13 Restrictions on Certain Foreign Purchases FEB 2021 52.225-18 Place of Manufacture AUG 2018 52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

OCT 2018

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2021

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7005 Representation Relating to Compensation of Former DoD Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

DEC 2019

252.204-7014 Limitations on the Use or Disclosure of Information by Litigation Support Contractors

MAY 2016

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements NOV 2020 252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2020 252.225-7048 Export-Controlled Items JUN 2013 252.225-7974 (Dev) Representation Regarding Business Operations with the

Maduro Regime (DEVIATION 2020-O0005)

FEB 2020

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7006 Wide Area WorkFlow Payment Instructions DEC 2018 252.232-7010 Levies on Contract Payments DEC 2006 252.239-7098 (Dev) Prohibition on Contracting to Maintain or Establish a

Computer Network Unless Such Network is Designed to Block Access to Certain Websites - Representation.

(Deviation 2021-O0003)

APR 2021

252.244-7000 Subcontracts for Commercial Items JAN 2021

CLAUSES INCORPORATED BY FULL TEXT

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

(NOV 2021)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition--

(1) Is set aside for small business and has a value above the simplified acquisition threshold;

(2) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(3) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of offers:

(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and--

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or

(C) If this solicitation is a request for proposals, it was the only proposal received.

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers.

Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.

(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.

(i) Availability of requirements documents cited in the solicitation.

(1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--GSA Federal Supply Service Specifications Section, Suite 8100, 470 East L'Enfant Plaza, SW, Washington, DC 20407, Telephone (202) 619-8925, Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision.

Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (https://assist.dla.mil/online/start/).

(ii) Quick Search (http://quicksearch.dla.mil/).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by--

(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone

(215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Unique entity identifier. (Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Offeror to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier.

(k) Reserved.

(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award;

(5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

(End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

www.acquisition.gov/far

(End of clause)

52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (NOV 2020)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision.

(b) The use in this solicitation of any DFARS (48 CFR Chapter 2) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of provision)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any DFARS (48 CFR 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

Attachment 1 Specifications

Boat Specifications

Hull Design: Fully aluminum self-bailing hull, pressure tested and sealed flat bottom

Hull Construction Material: Minimum 1/8” all welded aluminum

Hull Length: 20 feet

Hull Width: 72 inches at bottom

Hull Beam Width: 90 inches at beam

Hull Side Depth: 24 inches

Hull Transom Height: 20 inches

Hull coating: Super slide, gator glide or equivalent undercoating

Front Deck Floor: Hydro-Turf style non-skid coating or equivalent, color matching boat.

Exterior Color: Light Gray

Interior Floor Color: Matching exterior boat color

Console Location: Center Console, set up for dual remote motor steer, hydraulic steering with ignition, throttles, and all gauge(s).

Rear seating dry box compartment behind center console that has minimum of one seat pedestal attached for operator’s location. Rear dry box shall be full width of boat from beam to beam with hinged access lid on top. Access lid must be minimum 75% of width of rear compartment. Rear seating shall be set up to allow operator to stand or sit while operating vessel.

Front center console dry box: Dry box not to exceed width of console. Seat pedestal shall be centered and attached.

Front Deck: Single level, elevated front deck minimum 4 feet in length with storage access with hinged lid.

Additional Specs: The vessel will have an open floor area in the center section around the console, other than dry box specified above, with no additional storage items such as rod boxes, etc. Two additional seat pedestals shall be affixed to hull bottom on starboard and port sides. Center of pedestal shall be spaced 24 inches rearward from edge of front deck and spaced 10 inches from bottom of hull/beam sides.

Vessel shall come equipped with a rear mounted full width poling platform, matching paint color of vessel. Platform mounting bars shall meet, but not exceed, the rear stern width at beam.

Vessel shall come equipped with spud pole brackets located on port side of stern and starboard side of bow. In addition to spud pole brackets, boat shall come equipped with 2 poling spuds, fiber construction; and mud style foot pushing pole, fiber construction. Storage brackets for spud poles shall be located on opposite side of hull than that of the storage brackets for push pole.

Vessel shall come equipped with all USCG approved safety equipment and vessel equipment mandates per USCG regulations. Minimum safety equipment shall include sounding horn, navigation lights, two

(2) 5-B UL rated USCG approved fire extinguishers with mounting brackets, and safety shut off lanyard switch for motors.

Vessel will come equipped with 4 T-Rail style tie down eyes, adjustable through a T-rail style design on beam of boat, paint color matching vessel.

Vessel shall come equipped with an adjustable T-rail style grab bar, color to match the paint of vessel.

Engines Specifications

Horsepower: Dual (2) minimum 40 horsepower surface drive units with hydraulic power trim.

Engine Type: Four stroke air cooled.

Fuel Type: Gasoline

Fuel Capacity: 30 Gallon minimum

Propulsion Type: Stainless steel shallow water three bladed propeller.

Additional Engine Specifications:

1.) Motors will be shallow drive, also known as surface drive, remotely steered with keyed electrical start. Long shaft for 20” transom.

2.) Both motors shall be mounted and installed to run together (dual remote steering package) …i.e.

steering, throttle, linkage, and gear shift. Motors can be separately keyed with shut off lanyards.

Motors will be affixed and steered with hydraulic lines. Batteries shall be wired with master shutoff switches for both batteries. This can be a single unit with dual function battery terminals or two individual units for each battery.

3.) Both motors’ lower units shall be gear driven and hydraulically actuated 180 degrees swivel to allow prop to spin full power in reverse.

Trailer Specifications

Construction Material: Aluminum

Color: Aluminum natural finish

Axle Count: Tandem Axle with bearing buddy or similar greaseable hubs.

Tires/Wheels: 14” aluminum wheels and DOT approved tires with mounted spare.

Bunker Type: Wood covered with carpet or a similar material, no rollers. Adjustable PVC guide poles

Hitch Coupler: Must accept 2-inch ball with swing away adjustable wheeled dolly mounted near front hitch.

Lights: LED brake/turn signals and wired to hook up to tow vehicle. Can be either design (round pin or flat) to meet current vehicles.

Pictures are solely for comparison of specifications to give a visible representation and are not intended to be used for soliciting nor imply make, model, or brands solicited for.

Pictures were obtained from Pro Drive manufacturing website www.prodriveoutboards.com Jan 2022.

http://www.prodriveoutboards.com/