B-1 Nose Radome Synopsis 30 Jan 23 Final RFP.pdf

The United States Air Force through Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the manufacture and repair of the B-1 Nose Radome. An Indefinite-Delivery

Requirements contract is contemplated.

The requirements set forth in this notice are defined per Purchase Request FD20302000777 and

FD20302102105 as follows:

(1) Action Code:

N/A

(2) Date:

30 January 2023

(3) Year:

(4) Contracting Office Zip Code:

73145

(5) Product or Service Code:

(6) Contracting Office Address:

DEPARTMENT OF THE AIR FORCE (DAF)

BLDG 3001 SUITE 1AF1-99A

TINKER AFB, OK. 73145

(7) Subject:

Pre-Solicitation Notice Synopsis of B-1 Nose Radome - Final RFP

(8) Proposed Solicitation Number:

FA811923R0004 (Previously FA811922R0008)

(9) Closing Response Date:

Anticipated solicitation issue date: 14 February 2023

Anticipated solicitation closing date: 31 March 2023

(10) Contact Point or Contracting Officer:

Jaqueline Hughes

Buyer

Jaqueline.hughes@us.af.mil

(11) Contract Award and Solicitation Number:

TBD

(12) Estimated Contract Award Dollar Amount:

(13) Contract Line Item Numbers:

Proposed Line Items

Line Item 0001: B-1 Nose Radome

NSN: 1560-01-259-6044 EK

Part number: L3050242-051

Description: B-1 Nose Radome

Line Item 0002: B-1 Nose Radome (First Article)

Line Item 0003: First Article - Material Certification

Description: Material Certification

Line Item 0004: First Article – Certification of Compliance

Description: Certificate of Compliance

Line Item 0005: First Article – Contractor/Government Test Report

Description: Contractor/Government Test Report

Line Item 0006: Teardown, Test, and Evaluate (TTE)

Line Item 0007: Repair of B-1 Nose Radome – Informational

Line Item 0007AA: Level I Repair – B-1 Nose Radome mailto:Jaqueline.hughes@us.af.mil

Line Item 0007AB: Level II Repair – B-1 Nose Radome

Line Item 0007AC: Level III Repair – B-1 Nose Radome

Line Item 0007AD: Beyond Economic Repair (BER) Not to Exceed 75%

Line Item 0008: Over & Above

Line Item 0009: Contract Data Requirements List (CDRLs)

Description: Line Item Data

Line Item 0010: Non-Recurring Engineering (NRE)

Description: Engineering

Line Item 0011: Repair/Maintenance of AC UNIT

Description: Line Item Maintenance of AC Unit

Line Item 0015: Tooling

NSN: 1560-RP-H22-000B

Description: Tooling

Line Item 0016: Refurbishment and Manufacturing of GFP

NSN: 1560-RP-H22-000C

Description: Refurbishment and Manufacturing of GFP

Line Item 0017: Antenna Assembly

NSN: 5985-01-152-4173 EK

Part number: Multiple part numbers

Description: Antenna Assembly

(14) Contract Award Date:

(15) Contractor:

(16) Description:

(a) National Stock Number (NSN) if assigned:

1560-01-259-6044 EK

(b) Specification and whether an offeror, its product, or service must meet a qualification requirement in order to be eligible for award, and identification of the office from which additional information about the qualification requirement may be obtained (see Subpart 9.2).

(c) Manufacturer, including part number, drawing number, etc:

(d) Size, dimensions, or other form, fit or functional description:

(e) Predominant material of manufacture:

Aircraft grade materials

(f) Quantity, including any options for additional quantities:

To be provided in solicitation.

(g) Unit of issue:

(h) Destination information: -

(i) Delivery schedule:

(j) Duration of the contract period.

60 months

(k) Sustainable acquisition requirements (or a description of high-performance sustainable building practices required, if for design, construction, renovation, repair, or deconstruction) (see parts 23 or 36).

N/A.

(l) For a proposed contract action in an amount estimated to be greater than $25,000 but not greater than the simplified acquisition threshold, enter—

i. A description of the procedures to be used in awarding the contract (e.g., request for oral or written quotation or solicitation), and

ii. The anticipated award date.

(m) For Architect-Engineer projects and other projects for which the product or service codes are insufficient, provide brief details with respect to: location, scope of services required, cost range and limitations, type of contract, estimated starting and completion dates, and any significant evaluation factors.

(n) In the case of noncompetitive contract actions (including those that do not exceed the simplified acquisition threshold), identify the intended source and insert a statement of the reason justifying the lack of competition.

i. Except when using the sole source authority at 6.302-1, insert a statement that all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.

All responsible sources may submit a proposal which shall be considered by the

Agency.

ii. When using the sole source authority at 6.302-1, insert a statement that all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

(o) If solicitations synopsized through the GPE will not be made available through the

GPE, provide information on how to obtain the solicitation.

(p) If the solicitation will be made available to interested parties through electronic data interchange, provide any information necessary to obtain and respond to the solicitation electronically.

Electronic procedures will be used for this solicitation.

(q) If the technical data required to respond to the solicitation will not be furnished as part of such solicitation, identify the source in the Government, such as https://www.fedbizopps.gov/, from which the technical data may be obtained.

(17) First Article:

First Article Government and Contractor Test Required IAW Form AFMC IMT 260 First Article

Requirements. Note: Waivers may be considered when requested by the Contracting Officer.

(18) Place of Contract Performance:

Contractor’s facility.

(19) Set-aside Status:

This requirement will be full and open competition.

All questions regarding this notice are to be submitted in writing via E-mail. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also offerors must specify whether they are a U.S. or foreign-owned firm.

OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition). The purpose of the

Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273.

DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.