AUK FY21 SOW Electronics.docx

DOCX document 26 KB Posted

Attached to
Electronics Repair/Maintenance - NOAA Research Vessel AUK
Solicitation number
1305M221QNCNM1233
Issued by

View the file

Other files

File Type Posted
PRICING SCHEDULE.docx DOCX document
Past Performance Reference Sheet.pdf PDF
RFQ.docx DOCX document
OPEN MARKET CONTRACT CLAUSES.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Statement of Work – Electronics Revisions NOAA Research Vessel AUK

DRAFT 6-15-21

A] GENERAL INFORMATION:

1] This Statement of Work contains the requirements for revisions to navigation electronics on the NOAA Research Vessel AUK, hull number R5001.

2] The general characteristics of the vessel are as follows:

Length:50 feetBeam:19 feet
Draft:~5.1 feetDisplacement:~25 long tons

3] All work shall be accomplished at a boat yard to be identified by NOAA staff that is within 50 statute miles of Scituate Harbor. The period of performance is:

September 20, 2021 through March 1, 2022

4] Coordination of the work schedules shall be the responsibility of the contractor to avoid any delays or disruptions in order to meet the period of performance. The contractor shall provide all facilities, labor, materials, tools, and services required to complete the work.

5] NOAA employees and contractors may be working on board the vessel during the contract period of performance on a not to interfere basis. During this period, these personnel shall be given full access to the vessel during normal working hours.

6] All work performed under this SOW shall meet or exceed all current requirements of ABYC and USCG (Subchapter T) as applicable to this size and type of vessel, in addition to any specific requirements stated below.

7] All work performed on the vessel shall be accomplished as described below unless alternatives are presented in writing BEFORE the work commences, and are agreed to by NOAA. Any work that does not adhere to the descriptions shall be redone at the contractor’s expense within the defined period of performance.

8] A site visit is strongly encouraged. Quoters are strongly encouraged to inspect the vessel on which services are to be performed and to satisfy themselves as to all general and local conditions that may affect the cost of the performance of the contract, to the extent such information is reasonably obtainable. In no event shall a failure to inspect the vessel constitute grounds for a claim after award of the contract. The address for the site visit is 175 Edward Foster Road Scituate MA 02066. Government Contact Point for Site Visit: Dave Slocum, 978-500-0761, dave.slocum@noaa.gov

B] SPECIFIC WORK TASKS

1] Navigation equipment Provide the following navigation equipment. All equipment will be new, of the most current model year, and unused.

A] Furuno Navnet TZtouch3 chart plotter/fish finder, one each B] Furuno RD33 Repeater, two each C] Furuno GP33 GPS, one each D] Furuno FA170 Class A AIS transponder with 4.3” color LCD display, one each E] Furuno 24” solid-state Doppler radar with target analyzer and fast target tracking, one each F] Furuno Navnet single channel TrueEcho CHIRP 9” hybrid control IPS display, one each G] All cables, harnesses, antennas, and mounts required for all components above, as required

2] Install, test, and tune navigation equipment Remove the old equipment being replaced by the items noted in task 1 above. Install the equipment in task 1 above, connect all equipment to power, tune and program for proper functionality in the vessel, and demonstrate correct operation of each item.

3] Communications equipment Provide the following communications equipment. All equipment will be new, of the most current model year, and unused.

A] Cobham Sailor® Fleet One Inmarsat system, one each B] Cobham Sailor® Fleet One 3-axis stabilized antenna, one each C] Cobham below deck unit (BDU) with server, interfaced with Ethernet, antenna, and GPS, one each D] 10VDC-32VDC power supply, one each E] Primary handset and cradle, one each F] All cables, harnesses, antennas, and mounts required for all components above, as required

4] Install, test, and tune communications equipment Remove the old equipment being replaced by the items noted in task 3 above. Install the equipment in task 3 above, connect all equipment to power, tune and program for proper functionality in the vessel, and demonstrate correct operation of each item.

C] OTHER INFORMATION

1] IT Security Requirements The Certification and Accreditation (C&A) requirements of 48 CFR 1352.239-73 do not apply, and a Security Accreditation Package is not required. The Contractor will not be accessing US government computers or IT systems for this effort. The Contractor will not be accessing any information that is not within the public domain for this effort. The contractor will not be processing, transmitting or storing privileged access information (i.e., non-public) in carrying out the tasks of this contract.

File details come from the government source that posted it. Updated .